PBAxxxx
PBAAxxxx
PBAAAxxxx
English
Operating Instructions
REFRIGERATOR/FREEZER COMBINATION
Contents
Operating Instructions, 1
Assistance, 2
Description of the appliance, 3
Description of the appliance, 4
Reversible doors, 5
Installation, 6
Start-up and use, 7
Maintenance and care, 8
Precautions and tips, 9
Troubleshooting, 9
Description of the appliance
Control panel
1. ON/OFF
The entire product (both the refrigerator and freezer compartments)
may be switched on by pressing this button. The red LED indicates
that the product is switched off, while the green LED shows that it is
operating.
2. REFRIGERATOR - and + temperature adjustment
Used to modify the temperature setting of the refrigerator; confirmation
corresponding to the selected temperature appears on the display.
3. Refrigerator display
Shows the set temperature for the refrigerator compartment.
4. ECO
Controls the activation and deactivation of the ECO function (optimal
operating temperature for minimal energy consumption). When this
function is activated, the ECO LED on the keypad lights up.
Press and hold the ECO button for 8 seconds so that the
corresponding LED begins to flash; this will allow you to set the
temperature to +4°,+5°,+6° in the Refrigerator compartment and -18°,-
19°,-20° in the Freezer compartment.Ten minutes after the most
recent user interaction, the display enters its energy saving mode
(all LEDs switch off, except the ON/OFF and PRIME indicator
lights). To exit the energy saving mode, simply press any button
or open the refrigerator door.
5. FREEZER TEMPERATURE ALARM
The temperature of the freezer has exceeded the safety threshold for
optimal food storage (see Troubleshooting section)
6. DOOR OPEN ALARM
The refrigerator door has been open for more than two minutes (see
Troubleshooting section)
7.
(intelligent operation)
LED
The PRIME LED indicates that the product is controlling the internal
temperature so as to optimise it.
8. CHILD LOCK
Activates or deactivates the control panel button lock in order to avoid
the risk of the various functions being activated accidentally by
children. The CHILD LOCK LED on the keypad lights
up.
9. FREEZER - and + temperature adjustment
Used to modify the temperature setting of the freezer;
confirmation corresponding to the selected
temperature appears on the display.
1
2
10. FREEZER display
Shows the set temperature for the freezer
compartment.
11. SUPER COOL
3
Activates or deactivates the SUPER COOL function
(rapid cooling). The SUPER COOL LED on the
keypad lights up and ‘SC’ appears on the refrigerator
7
display.
6
5
12. SUPER FREEZE
Activates or deactivates the SUPER FREEZE function
(rapid freezing). The SUPER FREEZE LED on the
keypad lights up and ‘SF’ appears on the freezer
display.
10
9
4
13. HOLIDAY
Activates or deactivates the HOLIDAY function (the
HOLIDAY LED on the keypad lights up), while the
temperature values +12°C and -18°C appear on the
refrigerator and freezer displays respectively. Ten
13
11
12
minutes after the most recent user interaction, the
display enters its energy saving mode (see ECO
function).
8
14. ICE PARTY
Activates the ICE PARTY function (the temperature
14
is decreased for the amount of time it takes to cool a
bottle). The ICE PARTY LED on the keypad lights
up.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
3
Description of the appliance
Overall view
The instructions contained in this manual are applicable to different
model refrigerators. The diagrams may not directly represent the
appliance purchased. For more complex features, consult the following
pages.
1 Levelling FEET
2 STORAGE compartment
3 Ice3 Ice tray *.
4 FREEZER and STORAGE compartment
5 FRUIT and VEGETABLE bin *
6 FRESH BOX for MEAT and CHEESE *
7 WINE RACK *
8 SHELVES *
9 LAMP (see Maintenance).
10 Removable multipurpose SHELVES
11 BOTTLE shelf
*Varies by number and/or position, available only on certain models.
9
8
10
11
7
6
8
5
3
4
3
10
2
Completo Prime Display TIF
1
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
4
Reversible doors
If it is necessary to change the direction in which the doors open, please
contact the Technical Assistance Centre.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
5
Installation
GB
Changing the plug:
Removing the plug
If your appliance has a non-rewireable moulded plug and you should
wish to remove it to add a longer cable or to re-route the mains cable
through partitions, units etc. please ensure that either:
!Before placing your new appliance into operation please read these
operating instructions carefully. They contain important information for
safe use, for installation and for care of the appliance.
-
The plug is replaced by a fused 13amp re-wireable plug bearing
the BSI mark of approval.
! Please keep these operating instructions for future reference. Pass
them on to possible new owners of the appliance.
or
-
The mains cable is wired directly into a 13amp cable outlet,
controlled by a switch (in compliance with BS 5733) which is
accessible without moving the appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and condenser
give off heat and require good ventilation to operate correctly and
save energy.
3. Leave a space of at least 10 cm between the top part of the
appliance and any furniture above it, and at least 5 cm between
the sides and any furniture/side walls.
Disposing of the plug
Cut off and dispose of the supplied plug if it does not fit your socket. The
cable should be cut as close as possible to the moulded plug.
Remove the fuse.
4. Ensure the appliance is away from any sources of heat (direct
sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the appliance
and the wall behind it, fit the spacers supplied in the installation kit,
following the instructions provided.
WARNING:
To avoid a shock hazard do not insert the discarded plug
into a socket anywhere else.
Fitting a new plug
Levelling
IMPORTANT:
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by
tightening or loosening the front feet.
WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE
WITH THE FOLLOWING CODE...
Electrical connections
After the appliance has been transported, carefully place it vertically
and wait at least 3 hours before connecting it to the electricity mains.
Before inserting the plug into the electrical socket ensure the following:
• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance,
which is indicated on the data plate located on the bottom left side
of the fridge (e.g. 150 W).
• The voltage must be in the range between the values indicated on
the data plate located on the bottom left side (e.g. 220-240V).
• The socket is compatible with the plug of the appliance. If the
socket is incompatible with the plug, ask an authorised technician
to replace it (see Assistance). Do not use extension cords or
multiple sockets.
Green and Yellow
Blue
Brown
- Earth
- Neutral
- Live
!Once the appliance has been installed, the power supply cable and
the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by authorised
technicians only (see Assistance).
As the colours of the wires in the mains lead may not correspond with
the coloured markings identifying the terminals in your plug, proceed
as follows:
-
Connect Green and Yellow wire to terminal marked 'E' or
or
! The manufacturer declines any liability should these
safety measures not be observed.
coloured Green and Yellow.
Connect Brown wire to terminal marked 'L' or coloured red or
brown.
Connect Blue wire to terminal marked 'N' or coloured Black or
Blue.
-
-
Your appliance is supplied with a 13amp fused plug that can be
plugged into a 13amp socket for immediate use. Before using the
appliance please read the instructions below.
If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
If you are in any doubt about the electrical supply to your
machine, consult a qualified electrician before use.
Replacing fuse covers:
When replacing a faulty fuse, a 13amp ASTA approved fuse to BS
1362 should always be used and the fuse cover re-fitted.
If the fuse cover is lost, the plug must not be used until a replacement
is obtained.
CE Marking certifies that this appliance conforms to the
following EEC directives:
Low Voltage Equipment - 73/23/EEC & 93/68 EEC
Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/
68/EEC
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the correct colour as
indicated by the coloured marking or the colour that is embossed in
words on the base of the plug.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
6
Child Lock
Start-up and use
To activate the Child Lock function, press and hold the Child Lock GB
button for 2 seconds; the activation of this button lock is confirmed by
a short beep and the illumination of the corresponding LED on the
keypad. To deactivate the function, press and hold the Child Lock
button for 2 seconds; deactivation will be confirmed by a short beep
and by the corresponding LED switching off.
Starting the appliance
! After transportation of the appliance, carefully place it in an upright
position and wait at least 3 hours before connecting it to the electricity
mains, to make sure it operates as it should.
• Clean the inside of the refrigerator well using warm water and
bicarbonate of soda before placing food inside it.
• The appliance comes with a motor protection control system which
makes the compressor start approximately 8 minutes after being
switched on. The compressor also starts each time the power
supply is cut off whether voluntarily or involuntarily (blackout).
Chiller system
No Frost
Freezer Compartment
When the product is switched on the freezer compartment is set to its
default value of -18°C. We recommend that the SUPER FREEZE
function is set (the freezer status bar continues to display the set
value) in order to accelerate the cooling process of the compartment;
whentheinsideofthecompartmenthasreacheditsoptimaltemperature
the function will be deactivated and the food may be placed inside.
Refrigerator Compartment
When the appliance is switched on the refrigerator compartment is
set to its default value of +5°C. We recommend that the SUPER COOL
function is set (the refrigerator status bar continues to display the set
value) in order to accelerate the cooling process of the compartment.
After a few hours it will be cool enough for food to be placed inside.
The No Frost system circulates cold air continuously to collect humidity
and prevent ice and frost formation. The system maintains an optimal
humidity level in the compartment, preserving the original quality of
the food, preventing the food from sticking together and making
defrosting a thing of the past. Do not block the aeration cells by
placing food or containers in direct contact with the refrigerating back
panel. Close bottles and wrap food tightly.
Navigating the display
Setting the temperatures:
If the product is switched on, the refrigerator and freezer compartment
displays will indicate the temperature values set at that moment. To
change them, simply press the -and + buttons corresponding to the
compartment for which you wish to change the set temperature. More
specifically, each time the buttons are pressed, the temperature
increases or decreases and the level of cold generated inside the
compartment is adjusted accordingly. The temperature values that
may be selected for the refrigerator compartment are +8°C, +7°C,
+6°C, +5°C, +4°C, +3°C and +2°C, while the values that may be set
for the freezer are -18°C, -19°C, -20°C, -21°C, -22°C, -24°C and -
26°C.
When the “ECO” function is active, the appliance automatically adjusts
the temperatures according to the conditions inside and outside the
refrigerator, in order to minimise the amount of energy consumed; the
activation of this function is signalled by the ECO LED on the keypad
lighting up.
Using the refrigerator to its full potential
• Adjust the temperature using the display.
• ActivatetheSUPERCOOLfunctiontolowerthetemperaturequickly,
for example, when you place a large number of new food items
inside a fridge and the internal temperature rises slightly. This
function quickly cools the groceries by temporarily reducing the
temperature until it reaches the ideal level.
• Place only cold or lukewarm foods in the compartment, never hot
foods (see Precautions and tips).
• Remember that cooked foods do not last longer than raw foods.
• Do not store liquids in open containers: they will increase the level
of humidity in the refrigerator and cause condensation to form.
SHELVES: with or without grill.
Due to the special guides the shelves are removable and the height is
adjustable (seediagram), allowingeasystorageoflargecontainersand
food. Height can be adjusted without complete removal of the shelf.
When the HOLIDAY function is active the temperature may not be
adjusted, however the appliance adjusts itself automatically so that
the optimal settings for the situation are used: +12°Cfor the refrigerator
compartment and -18°C for the freezer compartment. The activation
of this function is indicated by the HOLIDAY LED lighting up.
To activate and deactivate the functions, simply press the relevant
button; the function status will be signalled by the corresponding LED
on the keypad switching on or off.
Severalofthefunctions(SUPERCOOL, SUPERFREEZE, ICEPARTY,
ECO) are incompatible with others (HOLIDAY,...); remember that
there is a pre-established order of priority which will help you to
operate the product in the best possible way.
When the ICE PARTY function has finished, press the ICE PARTY
button to stop the corresponding LED from flashing and to silence the
sound alert. The flashing and sound alerts indicate that the function is
complete and that the bottle should be removed from the freezer
compartment.
TEMPERATURE Indicator light*: to identify the coldest area in the
refrigerator.
1. Check that OK appears clearly on the indicator light (see diagram).
*Varies by number and/or position, available only on certain models.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
7
2. If the word “OK” does not appear it means that the temperature is
too high: adjust the REFRIGERATOR OPERATION knob to a higher
position (colder) and wait approximately 10 hours until the
temperature has been stabilised.
GB
3. Check the indicator light again: if necessary, readjust it following
the initial process. If large quantities of food have been added or if
the refrigerator door has been opened frequently, it is normal for
the indicator not to show OK. Wait at least 10 hours before adjusting
the REFRIGERATOR OPERATION knob to a higher setting.
MAX
WATER LEVEL
FRESH BOX*
This is the new box to keep meat, fish and cheese fresh. When
positioned in the “lower” part of the fridge compartment, it is ideal for
meat and fish; when moved to the “top” part of the fridge, it is perfect
for cheese.It can be taken out of the fridge when it is not needed.
Using the freezer to its full potential
• Adjust the temperature using the display.
• To freeze fresh food in the best and safest way possible, activate
the SUPER FREEZE function 24 hours before placing the food
in the freezer. After placing the food inside, activate the SUPER
FREEZE function again; it will be deactivated automatically after
24 hours.
• Fresh food that needs to be frozen must not come into contact with
food that has already been defrosted. Fresh food must be stored
in the top FREEZER and STORAGE compartment where the
temperature drops below -18°C and guarantees rapid freezing.
• Do not re-freeze food that is defrosting or that has already been
defrosted. These foods must be cooked and eaten (within 24
hours).
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to disconnect the
appliance from the electricity supply:
• Do not place glass bottles which contain liquids, and which are
corked or hermetically sealed in the freezer because they could
break.
1. Press the ON/OFF button to switch off the appliance.
2. Pull the plug out of the socket.
• The maximum quantity of food that may be frozen daily is indicated
on the plate containing the technical properties located on the
bottom left side of the refrigerator compartment (for example: Kg/
24h: 4).
! If this procedure is not followed, the alarm may sound. This alarm
does not indicate a malfunction. To restore normal operation, hold the
ON/OFF button down for more than two seconds. To disconnect the
appliance, follow points 1 and 2 above.
! Do not open the door during freezing.
Cleaning the appliance
! If there is a power cut or malfunction, do not open the freezer door.
This will help maintain the temperature inside the freezer, ensuring
that foods are conserved for at least 9 -14 hours.
!to avoid blocking the air circulation inside the freezer compartment,
it is advisable not to obstruct the ventilation holes with food or
containers.
• We recommend you clean your fridge with our Professional Fridge
cleaner.To order please call us on 08448 225 225 or visit
• The external and internal parts, as well as the rubber seals may be
cleaned using a sponge that has been soaked in lukewarm water
and bicarbonate of soda or neutral soap. Do not use solvents,
abrasive products, bleach or ammonia.
Ice3 ice tray
• The removable accessories may be soaked in warm water and
soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be removed
by delicately using the hose of a vacuum cleaner set on medium
power. The appliance must be switched off and the plug must be
pulled out before cleaning the appliance.
The fact that they are situated on the top part of the freezer drawers
ensures greater cleanliness: the ice no longer comes into contact with
the food placed inside the freezer compartment; furthermore, the
dripping of the water during filling is avoided (a lid to cover up the hole
after filling with water is also provided).
1. Pull out the tray by pushing it up. Check that the tray is ompletely
empty and fill it with water through the opening provided.
2. Take care not to exceed the level indicated (MAX WATER LEVEL).
Excess water prevents the ice cubes from dispensing (if this
happens, wait for the ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments each mould
fills with water (see diagram).
4. Close the opening with the lid provided and put the tray back,
placing the top part in the corresponding housing and allowing it to
drop in again.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which are
odour free. In order to maintain an odour free refrigerator and to
prevent the formation of stains, food must always be covered or
sealed properly.
• If you want to switch the appliance off for an extended period of
time, clean the inside and leave the doors open.
*
Replacing the light bulb
5. When the ice has formed (minimum time approximately 8 hours)
knock the tray against a hard surface and wet the outside so that
the ice cubes come loose and take them out through the opening.
• We recommend you clean your fridge with our Professional Fridge
cleaner.To order please call us on 08448 225 225 or visit
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
8
To replace the light bulb in the refrigerator compartment, pull out the
plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the
diagram. Replace it with a similar light bulb within the power range
indicated on the cover.
responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
• Keep packaging material out of the reach of children! It can become
a choking or suffocation hazard.
GB
Disposal
• Observe local environmental standards when disposing packaging
material for recycling purposes.
• The European Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE), requires that old household electrical
appliancesmustnotbedisposedofinthenormalunsortedmunicipal
waste stream. Old appliances must be collected separately in
order to optimise the recovery and recycling of the materials they
contain and reduce the impact on human health and the
environment. The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of the
appliance it must be separately collected. Consumers should
contact their local authority or retailer for information concerning
the correct disposal of their old appliance.
1
1
2
Precautions and tips
Respecting and conserving the environment
• Install the appliance in a fresh and well-ventilated room. Ensure
that it is protected from direct sunlight and do not place it near heat
sources.
• Try to avoid keeping the door open for long periods or opening the
door too frequently in order to conserve energy.
• Do not fill the appliance with too much food: cold air must circulate
freely for food to be preserved properly. If circulation is impeded,
the compressor will work continuously.
• Do not place hot food directly into the refrigerator. The internal
temperature will increase and force the compressor to work harder
and will consume more energy.
!The appliance was designed and manufactured in compliance with
international safety standards. The following warnings are provided
for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and
subsequent amendments;
- 2002/96/CE..
• Defrost the appliance if ice forms (see Maintenance). A thick layer
of ice makes cold transference to food products more difficult and
results in increased energy consumption.
General safety
• The appliance was designed for domestic use inside the home
and is not intended for commercial or industrial use.
• The appliance must be used to store and freeze food products by
adults only and according to the instructions in this manual.
• The appliance must not be installed outdoors, even in covered
areas. It is extremely dangerous to leave the appliance exposed
to rain and storms.
• Do not touch the appliance with bare feet or with wet or moist
hands and feet.
• Do not touch the internal cooling elements: this could cause skin
abrasions or frost/freezer burns.
• When unplugging the appliance always pull the plug from the mains
socket, do not pull on the cable.
• Before cleaning and maintenance, always switch off the appliance
and disconnect it from the electrical supply. It is not sufficient to set
the temperature adjustment knobs on ON/OFF (appliance off) to
eliminate all electrical contact.
Troubleshooting
If the appliance does not work, before calling for Assistance (see
Assistance), check for a solution from the following list.
The display is completely switched off.
• The plug has not been inserted into the electrical socket, or not far
enough to make contact, or there is no power in the house.
The motor does not start.
• The appliance comes with a motor protection control (see Start-up
and use).
The display is on but it is dim.
• Pull out and reverse the plug before putting it back in the socket.
• In the case of a malfunction, under no circumstances should you
attempt to repair the appliance yourself. Repairs carried out by
inexperienced persons may cause injury or further malfunctioning
of the appliance.
• Do not use any sharp or pointed utensils or electrical equipment -
other than the type recommended by the manufacturer - inside the
frozen food storage compartments.
The alarm sounds and DOOR OPEN ALARM flashes on the
display (“d” is displayed instead of the REFRIGERATOR
temperature).
• The refrigerator door has been open for more than two minutes.
Thesoundalertstopswhenthedoorisclosedorwhentheappliance
is switched off and on again.
• Do not put ice cubes taken directly from the freezer into your
mouth.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or lack of experience
and knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person
The alarm sounds and TEMPERATURE ALARM flashes on the
display (“A1” is displayed instead of the FREEZER
temperature).
• The temperature inside the freezer is too high. The freezer will
maintain a temperature of around 0°C so that the food will not
refreeze, allowing you to eat it within 24 hours or to refreeze it after
it has been cooked.
To switch off the buzzer, open and close the appliance door or
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
9
press the + and – freezer temperature adjustment buttons once.
Press these buttons a second time to display the set value on the
freezer display, switch off the TEMPERATURE ALARM LED and
restore normal operation.
GB
The alarm sounds and temperature alarm flashes on the
display (“A2” is displayed instead of the FREEZER
temperature).
• The temperature of the freezer is dangerously high: the food inside
must not be eaten. The freezer will maintain a temperature of
approximately -18°C.
To switch off the buzzer, open and close the appliance door or
press the + and – freezer temperature adjustment buttons once.
Press these buttons a second time to display the set value on the
freezer display, switch off the TEMPERATURE ALARM LED and
restore normal operation.
The refrigerator and the freezer do not cool well.
• The doors do not close properly or the seals are damaged.
• The doors are opened too frequently.
• The temperature that has been set is too high (see Start-up and
use).
• The refrigerator or the freezer have been over-filled.
The food inside the refrigerator is beginning to freeze.
• The temperature that has been set is too low (see Start-up and
use).
The motor runs continuously.
• The SUPER FREEZE button has been pressed (rapid freezing):
the yellow SUPER FREEZE light is on or flashing (see Description).
• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
The appliance makes a lot of noise.
• The appliance has not been installed on a level surface (see
Installation).
• The appliance has been installed between cabinets that vibrate
and make noise.
• The internal refrigerant makes a slight noise even when the
compressor is off. This is not a defect, it is normal.
Early ending of functions
• Electrical disturbance on the network or brief interruptions of the
power supply.
Don’t forget should our advice fail to resolve the problem with
your appliance please call us on 08448 224 224 to arrange an
Product failures are fully covered by your 12 months parts and
labour guarantee. However, if we attend and there is no
product failure or the failure has been caused by damage,
misuse or by incorrect installation, charges will apply.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
10
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
11
195090014.01
05/2011
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
12
|