16574006
Edition 1
May 2006
AC and AG Grinder
Parts Information
Save These Instructions
AC and AG Grinder Parts List
Item Part Description
--- Housing Assembly
Part Number Item Part Description
Part Number
22037451
22037535
22037469
22037550
22041644
WL2-BTF
22041651
WL2-BTF
D0F9-879
22037279
22037501
22037477
22037568
107-97
32 Motor Clamp
(312 and 320 Series)
22041388
22041396
---
33 Housing Cap
--- Housing Assembly (314 Series)
34 Pinion (312 and 314 Series)
Pinion (320 Series)
* 1
* 2
Motor Housing
Valve Bushing
---
35 Angle Head Cap Assembly
--- Throttle Lever Assembly
22041412
---
36
Warning Label
* 3
* 4
* 5
* 6
7
Throttle Lever
Throttle Lever Latch
Latch Spring
37 Angle Housing Assembly
---
36
38
Warning Label
Grease Fitting
---
Latch Pin
---
39 Upper Arbor Bearing
40 GreaseWick
Throttle Lever Pin
80096456
22041404
22037154
WL1-BTF
312AG3-301
312AC4-301
314AG3-301
314AC4-301
320AG3-301
320AC4-301
22041370
22037220
22037238
22037217
22037204
107-314
22037246
107-710
22037253
308-251
103-266
22037279
308-98
• 8 Gasket, O-Ring
41 Gear (312 and 314 Series)
Gear (320 Series)
9
Composite Housing Assembly
Warning Label
10
42 Lower Arbor Bearing
43 Arbor, 3/8” -24 THD
Arbor, 1/4” Collet
11 Nameplate (312AG3)
Nameplate (312AC4)
Nameplate (314AG3)
Nameplate (314AC4)
Nameplate (320AG3)
Nameplate (320AC4)
• 12 Muffler Element
• 13 Silencer
80114424
80114416
80114408
22037642
22037527
22037352
22037378
22037360
22037659
22037667
AG20-106-3
22037717
22037709
22037725
43A Spacer
44 Key
45 Arbor Bearing Cap
46 1/4” Collet (AC Series)
47 Collet Cap (AC Series)
48 Collet Nut (AC Series)
49 Guard Adaptor (AG Series)
50 Cap Screw (AG Series)
51 Wheel Guard (AG Series)
52 Flange Spacer (AG Series)
53 Wheel Flange (AG Series)
54 Wheel Nut (AG Series)
55 Lockwasher, Guard Mounting
(AG Series)
• 14 O-Ring
15 Exhaust Deflector
16 Inlet Bushing
• 17 Valve O-Ring
18 Valve Stem
19 Valve Spring Seat
20 Valve Spring
• 21 Valve Plug O-Ring
22 Valve Plug
22037691
22037683
302-69
56 Screw, Guard Mounting (AG Series)
57 Wrench (AC Series)
58 Hex Key (5 mm) (AG Series)
59 Hex Key (3 mm) (AG Series)
60 Hex Key (2.5 mm) (AG Series)
61 Spanner Wrench (AG Series)
62 Wrench
• 23 Rear Rotor Bearing
24 Cylinder Dowel
25 Rear End Plate
26 Rotor
22037733
22037758
22037766
22041271
22041263
22040992
LG1-K284
22037261
22037295
22041636
22037287
22037444
22037329
107-97
• 27 Vane Packet (set of 4 vanes)
28 Cylinder
29 Front End Plate
30 Front Rotor Bearing Spacer
• 31 Front Rotor Bearing
63 Tool Holder
+
Piped Away Exhaust Kit
+
•
Not Illustrated.
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one
(pair or set) of each part indicated by a bullet (•) for every four tools in service.
*
Not a least replaceable unit. Only available as part of next higher assembly.
16574006_ed1
3
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by
material so that they can be recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
Related Documentation
For additional information refer to:
Product Safety Information Manual 04584959.
Product Safety Information Manual 04580288.
Product Information Manual 80152853.
Product Information Manual 80152846.
Maintenance Information Manual 16575052.
4
16574006_ed1
Notes
16574006_ed1
5
Notes
6
16574006_ed1
Notes
16574006_ed1
7
|