|
Quick Setup Guide NS-MB5000-C
Mobile Battery Pack
PACKAGE CONTENTS
CHARGING YOUR ELECTRONIC DEVICE
•
•
•
Mobile Battery Pack
Micro USB Charging Cable
Quick Setup Guide
USB (output)
CHARGING THE MOBILE BATTERY
LEDs
Micro USB (input)
1
2
Plug the large end of the USB cable into one of the mobile
battery’s USB ports (output).
Plug the small end of the USB cable into your device.
The mobile battery automatically begins charging your
device.
Notes:
•
You can use both outputs to charge your devices at the
same time. The total maximum output is 2A.
1
2
Plug the small end of the USB cable into the mobile battery’s
microUSB port (input).
Plug the large end of the included USB cable into a standard USB
port on your computer, vehicle charger, or wall charger (not
included).
•
If your device requires a different connector than the one
provided, use the cable that came with your device
CHECKING YOUR BATTERY LEVEL
• • • • 4 LEDs = 75-100% power
The mobile battery automatically begins charging.
• • • • 3 LEDs = 50-75% power
• • • • 2 LEDs = 25-50% power
• • • • 1 LED = 0-25% power
Before using your new product,
please read these instructions to prevent any damage.
|