Insignia Clock Radio NS CLIP01 User Manual

Quick Setup Guide  
Clock Radio with iPod/iPhone Dock NS-CLIP01  
Features  
Front view  
Setting the time  
#
Component  
Description  
Congratulations on your purchase of a  
high-quality Insignia product. Your  
NS-CLIP01 represents the state of the art in  
clock radios with an iPod/iPhone dock and  
is designed for reliable and trouble-free  
performance.  
1 Press and hold Clock/Sync for two seconds until the hour blinks on the  
1
Dock  
Insert your iPod/iPhone into this dock to play selections through your clock radio.  
The clock radio charges the iPhone/iPod when docked. Use the adapter that came with your  
iPod/iPhone, if needed.  
display.  
2 Press Tune or to set the hour.  
3 Press the Clock/Sync button again. The minutes blink on the display.  
4 Press Tune or to set the minutes.  
5 To finish setting the clock, press the Clock/Sync button again, or just  
wait for ten seconds until the display returns to normal.  
2
3
Alarm 1/Alarm 2  
Sleep  
Press to set the alarm. See Setting the alarm on the right.  
Press to turn on the Sleep timer (15, 30, 45, 60, 75, 90). To turn off, press until “00” appears on  
the display.  
Package contents  
4
/Preset  
• In iPod mode, press to begin playback. Press again to pause playback. Press again to resume  
playback. Press and hold to turn off your iPod/iPhone screen.  
• In FM mode, press to select a preset station. Continue pressing to cycle through the available  
preset stations. You can store up to 10 preset stations.  
Using the Time Sync function  
• Clock radio with iPod/iPhone dock  
• AC power adapter  
1 Place your iPod/iPhone in the docking station.  
2 Press the Clock/Sync button. The clock radio syncs the time with the  
iPod/iPhone automatically.  
Note: The Time Sync function can be used with most of the iPod/iPhone  
models, except some older models such as iPod mini, iPod 3G, and iPod 4G.  
• AAA batteries (2)  
Quick Setup Guide  
5
6
Tune  
Tune  
• In iPod mode, press to go to the previous track, or press and hold to use fast back.  
• In FM mode, press to go to the next lower radio frequency, or press more than one second  
and release to search for a lower radio station.  
Works with all docking iPods and iPhones.  
Selecting the mode (Source)  
• In iPod mode, press to go to the next track, or press and hold to use fast forward.  
• In FM mode, press to go to the next higher radio frequency, or press more than one second  
and release to search for a higher radio station.  
Press SOURCE repeatedly to select iPod, Radio, or AUX. The source  
you select appears on the display.  
Installing the batteries  
1 Open the battery compartment on the bottom of  
your radio.  
2 Place two AAA size batteries in the battery  
compartment.  
Make sure to match the + and - on the battery to  
the + and - signs in the battery compartment.  
3 Close the battery compartment until it clicks into  
place.  
7
8
VOL+/VOL-  
Setting the alarm  
To set the alarm time:  
1 Press the Alarm button to select the alarm music source  
(Buzzer/Radio/iPod) or close the alarm.  
If you select iPod, make sure your iPod/iPhone is placed in the dock. If  
you select Radio, the alarm will be the last radio station you listened to.  
Press to increase or decrease the clock radio volume.  
SNOOZE/DIMMER  
Press while the alarm is sounding to turn the alarm off for 10 minutes. You can do this as many  
times as you want.  
To turn the alarm off until the next day, press any other button.  
To turn the alarm off, press the Alarm button until there is no source displayed next to the  
alarm icon on the display.  
Top view  
When the alarm is not sounding, press to cycle through the display brightness levels  
(high>middle>low).  
Note: When the clock radio is turned on, the LCD backlight defaults to High.  
2 Press and hold ALARM 1 or ALARM 2 until the hour digits blink.  
3 Press Tune or to set the hour, then press the ALARM 1 or  
ALARM 2 button. The minutes digits blink.  
4 Press Tune or to set the minutes, then press ALARM 1 or  
ALARM 2 to save the setting and exit the alarm setting mode.  
To turn the alarm off:  
Connecting the AC adapter  
1 Plug the small connector at the end of the power  
cord into the DC IN 5.9V jack on the back of your  
radio.  
2 Plug the AC adapter into a 100-240V, 50/60Hz  
power outlet.  
Press and hold to turn on your clock radio. Press and hold to turn off your clock radio.  
When your clock radio is on, press to cycle through the sound sources (iPod, RADIO, AUX).  
9
Power/Source  
10 ANT  
Extend the antenna to improve reception.  
1 When the alarm is sounding, press any key (except SNOOZE/DIMMER)  
to turn off the alarm. The alarm is set for the next day.  
2 If you do not want to set the alarm for the next day, press ALARM 1 or  
ALARM 2 repeatedly until the alarm icons disappear from the display.  
To use the snooze:  
• While the alarm is sounding, press SNOOZE/DIMMER. The SNOOZE  
indicator appears in the display. The alarm turns on automatically ten  
minutes later.  
The clock radio enters standby mode and the time  
appears on the display.  
11 CLOCK/SYNC  
Press to set the time or sync the time with an iPhone. See Using the Time Sync function on the  
right.  
12 AUX IN jack  
Plug the connector from an external sound source, such as an MP3 player, into this jack.  
Plug the small connector from the AC adapter into this jack.  
Turning the radio on and off  
1 In standby mode, press and hold  
POWER/SOURCE to turn on the clock radio. The  
Source name appears in the upper left-hand  
corner of the display.  
2 When you turn on the clock radio for the first  
time, iPod mode activates by default.  
For normal use, the system activates the last  
source used before you powered it off.  
3 Press and hold POWER/SOURCE again to switch  
to standby mode. The Source name is no longer  
displayed.  
Back view  
13 DC IN 5.9V jack  
Important notes  
The two AAA batteries are only for the clock memory. When battery power is low, or if they  
are installed incorrectly, the  
batteries.  
Please remove the batteries if your clock radio is not used for a long time.  
Precautions when using batteries  
Use only the size and type of batteries specified.  
Do not mix different types of batteries together (e.g., alkaline, rechargeable, and standard  
(carbon zinc), or old batteries with fresh ones.  
Exhausted batteries must be removed to prevent any battery leakage.  
Dispose of batteries properly according to environmental regulations.  
Notes:  
• If the alarm is set to Buzzer, the alarm volume gradually increases until it  
reaches the maximum.  
• If the alarm is set to Radio or iPod, the volume starts from Volume 1 and  
gradually increases to the volume level setting before the clock radio  
was turned off.  
• The alarm sounds for 20 minutes and then shuts off automatically.  
• If two alarms are set, the first alarm is stopped (set for the next day)  
when the second alarm time is reached.  
logo shows on the display. Change or reinstall the  
Volume control  
After you select the mode you want, press  
Volume + or Volume - to set the volume to a  
comfortable level.  
Note: When the volume is turned to minimum (00),  
the system enters MUTE mode.  
Battery (battery pack or battery installed) shall not be exposed to excessive heat, such as  
sunshine, fire, or the like.  
 

Indesit Dishwasher DFG 262 User Manual
Ingersoll Rand Sander R02 User Manual
Invacare Scale RSC600 User Manual
JVC Flat Panel Television rs 840UD User Manual
JVC VCR HR J249EK User Manual
Kenmore Clothes Dryer 6800 User Manual
Kenmore Gas Grill 90109 User Manual
Kenwood Speaker KFC 166X User Manual
KitchenAid Dishwasher KUDU03FTSS3 User Manual
KitchenAid Mixer KP26M1XBS4 User Manual