|
Quick Setup Guide NS-F4T6-WH/NS-F4T6-BL
4" Mini Fan
18 This fan uses a fuse for overload protection. A blown fuse indicates that
an overload or short-circuit has occurred. If the fuse blows, unplug the
fan from the outlet, then replace the fuse as indicated (using only a
2.5 Amp, 125 Volt fuse). If the replacement fuse blows, a short-circuit
may be present and the product should be thrown away or returned to
an authorized service facility for examination and/or repair.
19 Do not run the power cord under carpeting, throw rugs, runners, or
other coverings. Do not route the cord under furniture or appliances.
Keep the cord away from traffic areas where it could be tripped over.
Polarized plug
• This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way.
• If the plug does not fit fully into the outlet, reverse the plug and try again.
If it still does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
PACKAGE CONTENTS
• 4" high velocity personal fan
• Quick Setup Guide
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE IMPORTANT INSTRUCTIONS
1
2
Use your fan only as described in this Quick Setup Guide.
Do not use your fan if it works intermittently, stops working entirely, or
parts are missing or damaged.
FEATURES
• Whisper quiet motor
• Adjustable tilt angle head
3
4
To reduce the risk of fire or electrical shock, DO NOT use this fan with any
solid-state speed control devices (such as a dimmer switch) or expose it
to water.
To help prevent electrical shock, do not immerse your fan, plug, or power
cord in water or spray it with liquids.
5
6
7
Close supervision is needed when your fan is being used near children.
Unplug your fan before moving or cleaning it, or when it is not in use.
Never insert fingers or other objects through the grill while the fan is
running.
8
9
Make sure your fan is on a stable surface during use so it won’t overturn.
Do not use your fan in an open window. Rain may cause an electrical
hazard.
Power cord
• To insert the plug, hold it firmly and guide it into the outlet.
• To unplug, hold the plug and remove it from the outlet.
• Never pull or yank on the cord or fan.
• Check the cord for cuts and abrasion marks before each use.
• Do not wrap the cord tightly around the fan. This could stress the cord
where it enters the fan and cause it to fray and break.
10 Do not use your fan near explosive or flammable fumes.
11 Do not place your fan or its parts near an open flame, stove, or other
heating appliances.
12 Do not use your fan if the cord or plug is damaged. Throw your fan away
or return it to an authorized service facility for examination and/or repair.
13 Do not use your fan after a malfunction, drop, or if it is is damaged in any
way.
USING YOUR FAN
14 To unplug, pull the plug from the power outlet. Never yank on the power
cord.
15 Always use your fan on a dry surface.
1 Set your fan on a dry and level surface.
2 Plug in the fan.
3 Adjust the fan to the angle that you want.
4 Turn the control knob to ON.
16 This fan is intended for household use only. Do not use it for commercial
or industrial use.
17 Do not use this fan near curtains, plants, window treatments, or other
loose fabrics.
Before using your new product, please read these instructions to prevent any damage.
|