Quick Setup Guide
NS-HTIB51A 5.1 Channel Home Theater System
Front controls features
Features
Congratulations on your purchase of a high-quality Insignia
product. Your NS-HTIB51A represents the state of the art in
home theater system design and is designed for reliable and
trouble-free performance.
Front controls
ITEM DESCRIPTION
FUNCTION
1
2
ON/STANDBY button
HDMI THRU indicator
Press to turn on your stereo receiver.
Lights when the HDMI pass-through function is activated
in standby mode.
Package contents
3
4
5
6
7
STANDBY indicator
Remote control sensor
Display
SETUP button
TUNING /
Lights red when your stereo receiver is in standby mode.
Receives the signal from the remote control.
Provides information about receiver functions and settings.
Press to open the on-screen menus.
Press TUNING / to tune the radio to the next or
previous station
Press PRESET / to tune the radio to the next or
previous station preset.
Press ENTER to confirm a selection.
In menu mode, press to return to the main menu.
Press to save a radio station preset. Press with the TUNING
MODE button to clear presets.
• Receiver
• Speaker setup microphone
• Color labels for speaker cables
• Speaker cables:
• 11 ft. (3)
• 26 ft. (2)
• RCA cable 10 ft.
• Rubber spacers for speakers (20)
• User Guide
• Front speakers (2)
• Center speaker
• Surround speakers (2)
• Subwoofer
• Remote control
• AA batteries (2)
• FM antenna
PRESET /
ENTER
RETURN button
MEMORY button
8
9
• AM antenna
• Quick Setup Guide
10 TUNING MODE button
Press to turn on the receiver tuning mode and listen to
the radio. Press with the MEMORY button to clear presets.
Fluorescent display
Back view features
11 MASTER VOLUME knob
12 Headphone jack
13 Input selector buttons
14 Protective cap
15 AUX INPUT VIDEO jack
16 AUX INPUT AUDIO L/R jacks Plug an external sound source into this jack.
Turn to increase or decrease the volume.
Plug your headphones into this jack.
Press to select the input signal source you want.
Remove when using jack.
ITEM DESCRIPTION
FUNCTION
1
DIGITAL IN jacks
Plug the optical digital cable from a game (1) or
TV/CD (2) into the upper jacks, or the coaxial digital
cable from a Blu-ray disc/DVD into the lower jack.
Plug an external video source into this jack.
2
COMPONENT video
jacks
Plug the cables from a component video source into
the #1 (BD/DVD) or #2 (CBL/SAT) jacks.
Plug the cables to a component video monitor into
the OUT jacks.
The jacks are color coded (red, green, and blue) to
correspond to the cable connectors.
17 SETUP MIC jack
18 AUDIO button
Plug the Audyssey setup microphone into this jack.
Press to access audio settings.
Fluorescent display features
ITEM DESCRIPTION
3
4
HDMI jacks
Plug the HDMI signal input cable from a GAME (IN3),
cable/satellite box (IN2), or a BD/DVD player (IN1).
Plug the HDMI output signal cable to a TV or monitor
into the OUT jack.
Back view
ITEM DESCRIPTION
1
2
3
4
Audio input indicators
5
6
7
SLEEP indicator
MUTING indicator
DIGITAL display
Listening mode indicator
Audyssey indicators
Tuning indicators
ANTENNA connectors Connect a 75 ohm FM antenna to the coaxial connector
or an AM loop antenna to the wire connectors.
5
6
MONITOR OUT V (Video) Connect this jack to a TV monitor.
FRONT SPEAKERS
Connect the front speakers to these connectors.
Installing batteries in the remote control
SURROUND SPEAKERS Connect the left and right surround speakers and
1
2
Remove the cover.
CENTER SPEAKER
AC power cord
the center speaker to these connectors.
Plug this cord into an AC power outlet.
Insert two AA batteries into the compartment
matching the polarity indicated.
Replace the cover.
7
8
Composite Video and
Audio L/R jacks
Plug the composite video and audio L/R output cables
from the indicated devices into these jacks.
For video recording, plug the composite video and
audio L/R input cables to a VCR or DVR into the OUT
jacks.
3
CAUTION: Do not use Ni-Cd rechargeable
batteries in this remote control.
Remove the batteries if they are not to be used
for an extended period of time.
9
SUBWOOFER
Connect the subwoofer to this jack.
Batteries (AA)
Actual product may vary from image shown.
|