Spree XT Warning Label Kit
Assembly, Installation and Operating Instructions
Kit No. 1134819
SAVE THESE INSTRUCTIONS
Safety Summary
To ensure the safe and proper installation of the WARNING/CAUTION labels, these
instructions MUST be followed:
ꢀ WARNING
DO NOT install or use this kit without first reading and understanding this
instruction sheet. If you are unable to understand the Warnings, Cautions or
Instructions, contact Invacare Technical Support before attempting to install this
kit - otherwise, injury or damage may occur.
DO NOT use the wheelchair without installing these Warning and Caution labels.
The label kit contains the following labels:
PART NUMBER
1130222
REPLACE LABEL
1074106
1098319
60106X144
1085379
1110513
1098320
1026960
Installing Warning/Caution Labels
1. Determine the proper location for each label. Refer to FIGURE 1.
NOTE: The English labels are included in FIGURE 1 for ease in determining proper location.
2. Peel one (1) label from the adhesive backing.
3. Position the appropriate warning or caution label directly over the English label at the
location determined in STEP 1.
4. Repeat STEPS 1-3 for each label.
For more information regarding Invacare products, parts, and services,
1
