encounter
out of this world sound system
6
english
español
deutsch
français
italiano
easy setup guide
8
manual de instalación rápida
aufbauanleitung
Harman Multimedia
8500 Balboa Blvd.
Northridge, California 91329
USA
10
12
guide d’installation facile
guida d’Installazione facile
14
16
Part No. 950-0074-001 Rev. B
encounter FCC Regulations
encounter Safety Instructions
Conformity Statement
•
•
FCC Declaration of
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off
and then on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Please Read the Following Operation Precautions Before Use
Do not expose the speaker system to temperature or humidity
extremes, direct sunlight, excessive dust, or vibrations.
Place the speaker system on a stable, level surface. Do not drop,
apply excessive force to the controls, or put heavy objects on top
of the speaker.
If cleaning is required, use a soft dry cloth. If necessary, use a damp
cloth without any solvents.
In order to protect the speaker system, avoid microphone feedback,
continuous output from electronic musical instruments, or distorted
output from any signal source
Do not place the speakers close to fluorescent light sources or neon
light fixtures.
Although the speakers are magnetically shielded, keep magnetic stor-
age media (disks and tapes) at least four inches from the speaker sys-
tem in order to avoid data loss.
WARNING: To reduce the risk of fire or electric shock, do not expose
this speaker system to rain or moisture.
USE ONLY JBL approved power supplies listed on the product
label.
•
This device complies with Part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: (1) this device may not cause harm-
ful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Read instructions – All safety and operating instructions should be
read thoroughly before attempting to operate this audio system.
•
Retain instructions for future reference.
•
Heed warnings – All warnings on this audio system and in the
•
•
operating instructions should be adhered to.
Radio and Television Interference
•
Follow instructions– All operating and use instructions should
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
be followed.
•
Increase the separation between the equipment and receiver.
•
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
•
Connect the equipment to a different outlet so that the equipment
REMOVE THE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE THIS UNIT. PLEASE REFER
SERVICING TO QUALIFIED JBL CORPORATION SERVICE
PERSONNEL.
and receiver are on different branch circuits.
•
•
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by JBL could void
the user’s authority to operate the equipment.
•
Do not expose the speakers to liquid or solvent.
•
Never remove grille covers in order to service the speaker
•
•
system. The speaker system does not contain any user serviceable
parts. Refer all servicing to the JBL Technical Support Group.
encounter Instrucciones de seguridad
•
Sírvase leer las siguientes instrucciones de operación antes de usar
el producto
Advertencia: El uso de controles, ajustes o procedimientos diferentes a
los especificados en estos documentos puede resultar en la exposición
a descargas eléctricas, riesgos eléctricos y/o riesgos mecánicos.
No retire nunca las tapas de rejilla para tratar de reparar el sistema de
altavoces. El sistema de altavoces no contiene ninguna pieza
que pueda ser reparada por el usuario. Dirija todas sus preguntas
de servicio al Grupo de aApoyo técnico de JBL
No exponga el sistema de altavoces a temperaturas o humedad
extremas, luz solar directa, polvo excesivo o vibraciones.
Coloque el sistema de altavoces sobre una superficie estable y
nivelada. No lo deje caer ni aplique fuerza excesiva a los controles,
como tampoco ponga objetos pesados sobre ningún altavoz.
•
•
•
Lea las instrucciones – Es importante que lea completamente
todas las instrucciones de seguridad y operación antes de usar
este sistema de audio.
•
Guarde las instrucciones para su futura referencia.
•
•
Si requiere limpieza, use un paño suave y seco. Si es necesario,
humedézcalo con agua, pero no use ningún solvente.
Para proteger el sistema de altavoces, evite la retroalimentación
del micrófono, la salida continua de instrumentos musicales electróni-
cos o la salida distorsionada de cualquier fuente de señales.
•
Observe las advertencias – Es importante que observe todas las
advertencias en este sistema de audio y en las instrucciones de
operación.
Siga las instrucciones – Siga todas las instrucciones de operación
y uso.
•
•
•
No coloque los altavoces cerca de luces fluorescentes o de neón.
•
PARA EVITAR EL RIESGO DE CHOQUES ELÉCTRICOS, NO
RETIRE LA TAPA (O PANEL TRASERO). NO HAY PIEZAS SUS-
CEPTIBLES DE REPARACIÓN EN EL INTERIOR DE ESTA
UNIDAD. TODO EL SERVICIO DE MANTENIMIENTO DEBE
SER EFECTUADO POR EL PERSONAL DE SERVICIO CALIFI-
CADO DE JBL.
Aunque los altavoces están protegidos magnéticamente, mantenga
los medios de almacenamiento magnético (tales como discos y
cintas) a una distancia de por lo menos diez centímetros del sistema
de altavoces para impedir la pérdida de datos.
ADVERTENCIA: para reducir el riesgo de incendio o choque eléctri-
co, no exponga este sistema de altavoces a la lluvia o humedad.
Harman Multimedia
8500 Balboa Blvd.
Northridge, California 91329
USA
•
•
•
No exponga los altavoces a líquidos ni solventes.
UTILICE SOLAMENTE las fuentes de alimentación aprobadas JBL
enumeradas en la etiqueta del producto.
2
3
|