®
Operation
CD510K Features
How to EnjoyYour CD510K AM/FM
Basic Operation ......................... 2
On/Off ............................................2
Select Function ..............................2
Volume ...........................................3
Bass ...............................................3
Treble .............................................3
Balance ..........................................4
Fader..............................................4
Sub (subwoofer) ............................5
Loudness .......................................5
View/Set the Clock.........................5
Mode ..............................................5
Radio Operation ......................... 6
Radio Mode....................................6
Select a Band ................................ 6
Select a Station..............................6
Preset Stations ..............................7
Automatically Store Stations ..........7
Scan Stored Stations
Stereo Receiver/CD Player with Optional
CD Changer Control and Detachable
Flip-Over Security Panel
PWR
®
INSTALOC II TUNER
+
MONO
LOC LOUD
REL
5V
PREOUT
CDC
+
S.W
0
COMPACT
A.PS
CH
DIGITAL AUDIO
E
L
DISP
4
X
50 CDC CONTROLLER
CD510K
MEM
CLR
SCN
RPT
RDM
PGM
ET
Welcome!
(Preset Scan) .................................7
CD Player Operation ................. 8
CD Mode........................................8
Insert and Eject CD........................8
Skip Tracks ....................................8
Fast Forward and Fast Reverse .... 8
Pause CD.......................................8
Scan (Preview all Tracks) ..............9
Repeat the Same Track .................9
Random (Play all Tracks)...............9
Direct Track Access ....................... 9
Program CD Tracks ....................... 9
CD Changer Operation ........... 10
CDC Mode ...................................10
Direct Disc Access ....................... 10
Direct Track Access ..................... 10
Skip Tracks ..................................10
Pause CD Changer......................10
Fast Forward and Fast Reverse .. 11
Scan (Preview all Tracks) ............ 11
Repeat the Same Track ............... 11
Random (Play all Tracks)............. 11
Specifications
What you're holding in your hands is no ordinary owner's
manual. We've tried to make the instructions in this owner's
manual clear and easy to follow. If you take a few minutes to
look through it, you'll learn how to use all of the features on
your new Jensen car stereo for maximum enjoyment.
For your Jensen stereo to work right, it must be installed
correctly. The enclosed installation manual will show you how
to install your new stereo like a pro. It's a good idea to read
all of these instructions before you begin the installation.
Most installations are straightforward and can be handled by
a do-it-yourselfer with the right tools, patience, and the ability
to follow instructions. But, do-it-yourself installation isn't for
everyone. If you still don't feel confident after reading this
book, consider turning the installation job over to someone
better suited to it.
Warranty Service
If your Jensen stereo should ever require service, you will
need to have the original dated receipt. If you ever need to
return the unit for any reason, always include the receipt with
the product.
and Warranty............................. 12
Technical Assistance
For technical assistance with the operation of the CD510K,
call 1-800-323-0221.
®
CD510K
VOL
Volume
Treble
–
+
1. Press SEL button three
times. TRE appears in the
display.
1
Adjust volume
by turning
volume knob.
+
+
0
+
0
+
0= minimum volume
46= maximum volume
–
+
Bass
2. Adjust treble level
by turning volume
knob.
2
1. Press SEL button two times.
1
BAS appears in the display.
+
0
+
+
0
+
–6 = minimum treble
+6 = maximum treble
–0 = flat audio response
–
+
2. Adjust bass level
by turning volume
knob.
2
+
0
+
–6 = minimum bass
+6 = maximum bass
–0 = flat audio response
3
®
CD510K
Fader
Balance
1
1
+
+
+
0
+
0
1. Press SEL button four times.
1. Press SEL button five times.
2. Adjust sound balance left and right by
turning volume knob.
2. Adjust sound front and rear by turning
volume knob.
L
R
R
F
2
2
+
+
F12=Front
R12=Right
0
0
0
0
0
0
speakers only
speaker only
+
+
+
+
C=Equal sound
front and rear
C=Equal sound
right and left
+
+
+
+
R12=Rear
speakers only
L12=Left
speaker only
+
+
4
®
CD510K
View/Set the Clock
Sub (Subwoofer)
To view the time, press DISP button to
temporarily display clock.
1
2
+
+
0
To set the clock:
1. Press DISP button to display clock.
1. Press SEL button
six times.
2. Use the volume
knob for gain
adjust.
1
DISP
+
2. Press and hold DISP button for more than
0
two seconds. The colon will start blinking.
minimum
maximum
+
+
2
DISP
0
+
>2 sec
3. Within 3 sec-
Note: If the Sub (Subwoofer) is not activated,
the Sub (Subwoofer) function will not display.
PWR
3
onds, press
O
Tuning Ring
down to change
the hours and
up to change
the minutes.
M
H
E
E
L
Loudness
SCN
Press LOU to increase bass output.
LOUD will appear in display. Press
LOU again to deactivate loudness.
Mode
Press the MODE button to select Radio (TUN),
CD play (CD) or CD Changer (CDC) mode.
O
O
O
The MODE button only selects the CD mode if
a CD is inserted, and only selects the CDC
mode if a Jensen CD Changer is plugged in
and a CD is inserted.
5
®
CD510K
Radio Operation
PWR
®
INSTALOC II TUNER
+
MONO
LOC LOUD
REL
5V
PREOUT
S.W
0
COMPACT
A.PS
DIGITAL AUDIO
CH
E
+
DISP
4
X
50 CDC CONTROLLER
CD510K
MEM
CLR
SCN
RPT
RDM
PGM
ET
Radio Mode
Select a Station
O
D
Options for selecting a station
Press MODE button one time to
Press the Tuning Ring
up or down for less
than two seconds to
move radio frequency
number up or down
one step.
select Radio Mode (TUN).
PWR
M
O
D
E
or
S
E
L
Select a Band
SCN
Press BND button to
change radio be-
tween two FM bands
and one AM band.
Each band stores up
to ten preset sta-
tions.
<2 sec
Press and Hold the
Tuning Ring up or
down for more than
two seconds to seek
the next clear station.
PWR
M
O
D
E
or
S
E
L
SCN
>2 sec
6
®
CD510K
Preset Stations
Automatically Store Stations
MEM
CLR
Select ten strong stations and store them in
current band.
SCN
RPT
RDM
PGM
ET
Ten numbered preset buttons store and recall
stations for each band.
1. Select a band (if needed).
1
Store a station:
1. Select a band (if
needed).
1
2. Hold A.PS button for
more than two seconds.
The ten new stations
replace stations already
stored in that band.
2
A.PS
2. Select a station.
2
>2 sec
PWR
3. Hold a preset button
for two seconds.
or
The preset station
number appears on
the display when
SCN
Scan Stored Stations
(Preset Scan)
station is saved.
3
Scan stations stored in current band.
MEM
CLR
SCN
RPT
RDM
PGM
ET
1
2
1. Select a band (if needed).
>2 sec
+
0
CH
2. Touch A.PS for less than
two seconds. Radio pauses
for ten seconds at each
station. Touch A.PS again to
stop scanning when desired
station is reached.
A.PS
+
Band Preset Station Number
Recall a station:
<2 sec
1. Select a band (if needed).
1
2. Touch a preset button for less
than two seconds to select
stored station.
+
2
0
CH
+
MEM
CLR
SCN
RPT
RDM
PGM
ET
<2 sec
7
®
CD510K
CD Player Operation
PWR
®
INSTALOC II TUNER
+
REL
5V
PREOUT
0
COMPACT
A.PS
DIGITAL AUDIO
E
+
DISP
4
X
50 CDC CONTROLLER
CD510K
MEM
CLR
SCN
RPT
RDM
PGM
ET
Skip Tracks
CD Mode
M
M
Press the Tuning Ring
up or down to advance
to next track. Track
number appears for
less than 1 second
then the time remain-
ing appears.
O
D
Press MODE button two times to
PWR
select CD Player Mode (CD).
M
O
D
E
or
S
E
L
SCN
Insert and Eject CD
Press REL button to open flip-over
REL
panel. Push a CD into slot. The CD will
begin to play. Flip panel up to close.
Fast Forward and Fast Reverse
(High speed audible search)
Eject
button
Press and Hold the
Tuning Ring up or
PWR
x
x x
x
x
x
M
O
x
x
x
down to fast forward or
D
E
xx
x
x
x
or
fast reverse a track.
CD play resumes after
you release the ring.
x
x
x
x
S
E
L
SCN
Insert CD
label side up
Pause CD
+
+
0
During CD player operation, press
button to pause CD play. Press
again to resume play.
Track number
Press REL button to open flip-over
panel. Press (EJECT) to stop CD
play and eject CD from slot. Flip
panel up to close.
8
®
CD510K
Scan (Preview all Tracks)
Program CD Tracks
SCN
Press and hold the SCN button for
more than two seconds to play first
ten seconds of each track on current
CD. Press and hold the SCN button
for more than two seconds again to
stop intro and listen to track.
Use Program function to select up to
PGM
24 CD tracks to play in any order.
Program works by allowing you to
select a track number for each spot in
the playing sequence. A CD must be
inserted to use Program.
>2 sec
1
PWR
1. Press Tuning Ring
Repeat the Same Track
M
O
up or down to
choose track
number.
D
E
or
RPT
S
E
Press and hold the RPT button for
L
more than two seconds to continu-
ously repeat same track. RPT
SCN
>2 sec
appears in the display. Press and
hold the RPT button for more than
two seconds again to stop repeat.
MEM
CLR
2. Press MEM/CLR to enter
2
3
track number into
memory. Display shows
next track number in
sequence. Continue (up
to 24 times) for all desired
tracks.
Random (Play all Tracks)
RDM
PGM
Press and hold the RDM button for
more than two seconds to play all
tracks on CD in random order one
time. Press and hold the RDM button
for more than two seconds again to
stop random play.
3. Press PGM to play CD in
>2 sec
programmed order.
Note: Direct access of tracks or discs cannot
be performed while in Program CD function.
MEM
CLR
To clear memory, press and hold
Direct Track Access
MEM/CLR in PGM mode while
CD is playing.
While a CD is playing or paused, press a
preset button for less than two seconds to
select the corresponding track number (1–10).
MEM
CLR
SCN
RPT
RDM
PGM
ET
Note:
• Do not expose CD player to extremely
high or low temperatures.
<2 sec
• Do not drive with ejected CD in the slot.
9
®
CD510K
CD Changer Operation
PWR
®
INSTALOC II TUNER
+
REL
5V
CDC
PREOUT
0
COMPACT
A.PS
DIGITAL AUDIO
E
+
DISP
4
X
50 CDC CONTROLLER
CD510K
MEM
CLR
SCN
RPT
RDM
PGM
ET
The CD510K is designed to control an optional
Jensen 6-disc CD changer.
DirectTrack Access
While a CD is playing or paused, press a
preset button for less than two seconds to
select the corresponding track number (1–10).
CDC Mode
M
M
MEM
CLR
SCN
RPT
RDM
PGM
ET
Press MODE button three times to
M
O
D
select CD Changer Mode (CDC).
<2 sec
Skip Tracks
Direct Disc Access
Press Tuning Ring up
or down to advance to
next track. The track
number appears for
less than 1 second
then the time remain-
ing appears.
1
1. Press SHIFT (BND)
PWR
button.
M
O
D
E
or
S
E
L
2
MEM
CLR
SCN
RPT
RDM
PGM
SCN
2. Press a preset button (1–6) to select
corresponding disc number. Buttons 7–10
do not select discs.
Pause CD Changer
During CD player operation, press
button to pause CD play. Press
again to resume play.
10
®
CD510K
Repeat the Same Track
Fast Forward and Fast Reverse
(High speed audible search)
R
PT
Press and hold the RPT button for
more than two seconds to continu-
ously repeat same track. RPT
appears in the display. Press and
hold the RPT button for more than
two seconds again to stop repeat.
Press and Hold the
Tuning Ring up or
down to fast forward or
fast reverse a track.
CD play resumes after
you release the ring.
PWR
>2 sec
M
O
D
E
or
S
E
L
SCN
Random (Play all Tracks)
RDM
Press and hold the RDM button for
more than two seconds to play all
tracks on CD in random order one
>2 sec time. Press and hold the RDM button
for more than two seconds again to
stop random play.
Scan (Preview all Tracks)
Press and hold the SCN button for
SCN
more than two seconds to play first
ten seconds of each track on current
CD. Press and hold the SCN button
for more than two seconds again to
>2 sec
stop intro and listen to track.
11
Specifications
FM Tuner
Tuning range .............................................................................................................................................. 87.5 MHz–107.9 MHz
FM mono sensitivity ........................................................................................................................................................... 12 dBf
50 dB quieting sensitivity (stereo) ...................................................................................................................................... 16 dBf
Stereo separation @ 1 kHz ................................................................................................................................................. 40 dB
AM Tuner
Tuning range .................................................................................................................................................. 530 kHz–1720 kHz
Amplifier
Total system power .............................................................................................................................................. 200 Watts peak
Power output .................................................................................................................................................... front: 2 x 50 Watts
..........................................................................................................................................................................rear: 2 x 50 Watts
CD Player
Signal/noise ratio............................................................................................................................................................... >86 dB
Frequency response ............................................................................................................................................. 20 Hz - 20 kHz
Channel separation ........................................................................................................................................................... >65 dB
D/A converter .................................................................................................................................................................. 1 Bit/CH
General
Power supply................................................................................................................................... 11–16 VDC, negative ground
Speaker output impedance .......................................................................................................................................... 4–8 Ohms
Specifications subject to change without notice.
Limited One Year Warranty–USA and Canada
Length of Warranty. This warranty from Recoton Mobile
Electronics shall be in effect for a period of one year from
the date of the first consumer purchase.
If shipment of the product is required, it should be packed
securely. The original dated bill of sale must always be
included with the product as proof of warranty coverage.
Persons Protected. This warranty will be enforceable by
the original owner and any subsequent owners during the
warranty period so long as proof of date of purchase from
an authorized Jensen dealer is presented whenever
warranty service is required.
What We Will Pay For. We will pay for all labor and
material expenses required to repair the product, but you
must pay any labor costs for the removal and/or installation
of the product. If the product is shipped for warranty
service, you must prepay the initial shipping charges, but
Jensen will pay the return shipping charges if the product is
returned to an address inside the USA or Canada.
What is Covered. Except as otherwise specified below, this
warranty covers all defects in material and workmanship in
this product. The following are not covered: damage
resulting from accident, misuse, abuse, neglect, product
modification, improper installation, incorrect line voltage,
unauthorized repair or failure to follow instructions supplied
with the product; damage occurring during shipment (claims
must be presented to the carrier); elimination of car static
or other electrical interferences; any product purchased
outside USA or Canada, or on which the serial number
has been defaced, modified or removed.
Limitation of Implied or Statutory Warranties and
Conditions. All implied or statutory warranties and condi-
tions, including warranties or conditions of merchantability,
fitness for particular purposes and non-infringement, are
limited in duration to the length of this warranty.
Exclusion of Certain Damages. Jensen’s liability is limited
to the repair or replacement, at our option, of any defective
product and shall not include incidental or consequential
economic damages of any kind.
How You Can Get Service.
Some states and/or provinces do not allow limitations on
how long an implied warranty lasts and/or do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitations and exclusions may not
apply to you.
U.S. Purchasers. Please telephone Jensen at
1-800-323-4815. We will either inform you of the name
and address of an authorized Jensen repair station which
will service the product or will advise you to send the
product to a factory service center.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state and
province to province.
Canadian Purchasers. The product should be returned
to the Jensen dealer from whom it was purchased and
such dealer either will service or arrange for service of
the product.
®
Recoton Mobile Electronics
A Division of Recoton Audio Corporation
A RECOTON® COMPANY
1090 Emma Oaks Trail
Lake Mary, Florida 32746
©1999 Recoton Audio Corporation
12
|