Portable Docking CD Music System for iPod
Owner’s Manual
JiSS-115
(iPod Not Included)
Please read this Instruction Manual carefully before
using the unit and retain it for future reference
CD814 IPOD JENSEN IM 120V GB CUS1
1
2010/1/12
02:01:46
IMPORTANT SAFETY INSTRUCTIONS
(Continued)
Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in anyway, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on apparatus.
16. Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the mains
plug should be disconnected form the mains socket outlet completely.
17. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
IMPORTANT NOTE
In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting
it from mains supply and removing all the batteries. Wait at least for 5 seconds before reconnect the
AC power cord or reinstall the batteries.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT.
FULLY INSERT.
AC Outlet
AC Plug
2
CD814 IPOD JENSEN IM 120V GB CUS3
3
2010/1/12
02:01:47
WARNING
CLASS 1 LASER PRODUCT
CAUTION
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED
AVOID EXPOSURE TO BEAM
This product contains a low power laser device.
Follow the advice below for safe operations.
ON PLACEMENT
•
•
•
Do not use the unit in places which are extremely hot, cold, dusty, or humid.
Place the unit on a flat and even surface.
Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a
cloth, or by placing it on a carpet.
ON SAFETY
•
When connecting and disconnecting the AC cord, grip the plug and not the cord itself. Pulling the
cord may damage it and create hazard.
•
When you are not going to use the unit for a long period of time, disconnect the AC power cord
and remove all batteries.
ON AC VOLTAGE
Before use, check that the rated voltage of your unit matches your local voltage.
ON CONDENSATION
•
•
When left in a heated room where it is warm and damp, water droplets or condensation may form
inside the CD player.
•
•
When there is condensation inside the unit, the unit may not function normally.
Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the
unit before use.
Should any trouble occur, disconnect the AC power cord and refer servicing to qualified
personnel.
3
CD814 IPOD JENSEN IM 120V GB CUS4
4
2010/1/12
02:01:47
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
PROTECT YOUR FURNITURE!!
This system is equipped with non-skid rubber ‘feet’to prevent the product from moving when you operate
the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid
leaving any marks or stains on your furniture. However certain types of oil based furniture polishes,
wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a
rubber residue on the furniture.
To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive
felt pads, available at hardware stores and home improvement centers everywhere, and apply these
pads to the bottom of the rubber ‘feet’ before you place the product on fine wooden furniture.
4
CD814 IPOD JENSEN IM 120V GB CUS5
5
2010/1/12
02:01:47
WELCOME
Thank you for purchasing JENSEN JiSS-115 Docking System.
Before operating the unit, please read this manual thoroughly and retain it for future reference.
LOCATION OF CONTROLS
1.
2.
3.
4.
5.
6.
7.
8.
9.
FUNCTION BUTTON
POWER / STANDBY BUTTON
VOLUME CONTROL
CARRYING HANDLE
CD DOOR
6
8
10
5
7
9
15
11
4
3
12
FM STEREO INDICATOR
LCD DISPLAY
2
1
CD DOOR OPEN / CLOSE AREA
13
14
PLAY / PAUSE
BUTTON
BUTTON
BUTTON
10. B-SKIP
11. F-SKIP
12. PLAY MODE BUTTON
13. PROGRAM/CLOCK-ADJ. BUTTON
14. STOP
BUTTON
22
18
16
17
17
15. TUNING CONTROL
16. BAND SWITCH
21
20
19
17. SPEAKER
18. iPod CONNECTOR
19. AC SOCKET
20. BATTERY COMPARTMENT
21. TELESCOPIC ANTENNA
22. AUX. IN JACK
GETTING STARTED
Unpacking the Docking System
Please save all the original packaging. It provides the safest way to transport your unit.
POWER SOURCE
This Portable Docking System is designed to operate on 120V~ 60Hz AC power or with 8 ‘C” size
(UM-2) batteries (Not included).
CAUTION:
Mains plug should be regularly checked for any damage. If it is damaged do not operate the unit, seek
advice from a qualified service technician or contact the distributor of this product via the telephone
number at the back of this instruction manual.
Do not attempt to operate the unit on any other power source as this could cause damage to the unit
and void your warranty.
5
CD814 IPOD JENSEN IM 120V GB CUS6
6
2010/1/12
02:01:48
A. BATTERY OPERATION
Note: For best performance and longer operating time, we recommend the use of alkaline-type
batteries.
1. Remove the Battery Door on the back of the unit.
2. Follow the marked polarities and install 8 “C” size (UM-2) batteries.
3. Replace the Battery Door.
battery door
IMPORTANT: Be sure that the batteries are installed correctly.
Insert eight UM-2
(size C) batteries.
Wrong polarity may damage the unit.
BATTERY CARE
(a) Do not mix old and new batteries.
(b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
(c) If the unit is not to be used for an extended period of time, remove all batteries. Old or leaking
battery can cause damage to the unit and may void the warranty.
(d) Do not dispose batteries in fire. Batteries may leak or explode.
B. AC POWER CONNECTION
1. Insert one end of the power cord to the AC Socket on the back of
To AC socket
the Docking System. The internal battery source will automatically
be disconnected
2. Connect the power cord to an AC 120V~ 60Hz power outlet.
To AC outlet
TURNING POWER ON/OFF AND SELECTING FUNCTION
1. Turn the System to ON and OFF by pressing the POWER / STANDBY
Button.
STANDBY
2. The function is selected cyclically by pressing the FUNCTION Button:
CD
iPod
AUX
TUNER
FUNCTION
ADJUSTING THE SOUND LEVEL
To Adjust the Volume Level
VOLUME
6
CD814 IPOD JENSEN IM 120V GB CUS7
7
2010/1/12
02:01:49
CLOCK SETTING
The clock can only be adjusted and displayed in STANDBY mode.
1. Press the PROGRAM / CLOCK-ADJ. Button,
2. Press F-SKIP
or B-SKIP
to select 12 or 24 hour format.
3. Press the PROGRAM / CLOCK-ADJ. Button to confirm.
The Hour digit flashes.
PROGRAM / CLOCK-ADJ.
4. Press F-SKIP
or B-SKIP
to adjust the hour.
5. Press the PROGRAM / CLOCK-ADJ. Button to enter when the desired hour is shown.
The Minute digit flashes.
6. Press F-SKIP
or B-SKIP
to adjust the minute.
7. Press the PROGRAM / CLOCK-ADJ. Button again to confirm when the correct time is shown in
the Display.
LISTENING TO THE RADIO
1. Press the POWER / STANDBY
Button once to turn on the System. The LCD backlight will light.
2. Press the FUNCTION Button to select TUNER mode.
FUNCTION
FM
MHz
3. Set the BAND SWITCH to "AM" or “FM” for the desired radio band.
BAND
AM
FM
4. Tune to your desired station by turning the TURNING CONTROL.
The frequency of the tuned station will be displayed on the LCD Display.
The FM STEREO Indicator will light when a FM stereo program is received.
TUNING
5. Adjust the Volume Control to obtain the desired sound level from the Built-in Speakers.
6. To turn the System off, press the POWER / STANDBY
Button again. The LCD backlight will go
off.
7
CD814 IPOD JENSEN IM 120V GB CUS8
8
2010/1/12
02:01:50
TIPS FOR BEST RADIO RECEPTION
1. To insure maximum FM tuner reception, the Telescopic Antenna should be fully extended and
rotated to obtain the best possible station reception.
2. The AM antenna is built into the unit. When tuning in AM reception, be sure to place the unit in a
vertical position. To obtain the best AM reception, try repositioning the unit until the best station
reception is obtained.
FM
AM
CD PLAYER OPERATION
Note: This CD player plays not only commercial CDs, but also self-compiled CD-R/RW discs. Do not
attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.
Notes on CD-R/RW Discs
•
•
•
Because of non-standardized format definition/production of CD-R/RW, playback quality &
performance are not guaranteed.
Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as
PC performance, writing software, media ability, etc.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
1. Press the POWER / STANDBY
Button once to turn on the System. The LCD backlight will light.
2. Press the FUNCTION Button to select CD mode.
3. Open the CD DOOR by pressing the CD DOOR where OPEN/CLOSE is shown.
4. Carefully place an audio CD with its label side upward in the
CD compartment and close the CD Door.
5. The LCD Display will briefly display flashing “- -” and then the
total number of tracks on the CD will appear in the LCD Display
after a few seconds.
PLAY/ PAUSE
6. Press the PLAY/PAUSE
Button to start playback. The Play
Indicator “►” will light and the CD will start playing from the
first track.
7. Adjust the VOLUME CONTROL to obtain the desired sound level
from the Built-in Speakers.
TO INTERRUPT PLAYBACK
PLAY/ PAUSE
8. To suspend playing, press the PLAY/PAUSE
The Play Indicator will flash.
Button once.
Button again.
9. To resume playing, press the PLAY/PAUSE
The Play Indicator “►” will light steadily in the LCD Display.
8
CD814 IPOD JENSEN IM 120V GB CUS9
9
2010/1/12
02:01:50
SKIPPING AND SEARCHING TRACKS
B - SKIP
10. You can choose to play your favorite track directly by pressing
either the B-SKIP
the track number of the selected track.
11. To locate a particular passage within a track, keep the
B-SKIP F-SKIP Buttons depressed until it is found.
or F-SKIP
Buttons. The LCD Display will indicate
F - SKIP
REPEATING PLAYBACK
12. To repeat a particular track, press the PLAY MODE Button once. The REPEAT Indicator appears
in the LCD Display.
REPEAT
13. To repeat the entire CD, press the PLAY MODE Button twice. The REPEAT ALL Indicator lights
in the LCD Display.
REPEAT ALL
14. To cancel the REPEAT function, press the PLAY MODE Button two more times
until the REPEAT / REPEAT ALL Indicator disappears from the LCD Display.
RANDOM PLAYBACK
15. To play the tracks in random, in Stop mode press the PLAY MODE
Button three times. The Random Indicator “ ” will appear in the Display.
16. Press the PLAY/PAUSE
Button once. A track is picked at random and playback starts.
17. To cancel the random function, press the PLAY MODE Button again.
18. To stop playback, press the STOP Button once.
19. When you wish to turn the System off, press the POWER / STANDBY
Button.
The LCD backlight goes off.
CD PROGRAMMED PLAY
This function allows the tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode. Up to 20 tracks can be programmed.
1. In CD stop mode, press the PROGRAM Button once. “PROGRAM” will appear and Program
No. “P01” will appear briefly and then change to “00” and blink together with “PROGRAM” in the
LCD Display to prompt for input.
PROGRAM
PROGRAM / CLOCK-ADJ.
9
CD814 IPOD JENSEN IM 120V GB CUS10 10
2010/1/12
02:01:51
2. Press the B-SKIP
or F-SKIP
Buttons to select the song to be programmed.
For example track 5 is selected.
3. Press the PROGRAM Button again to store the selection. The Program No. will advance to “P02”
and then change to “00” and blink to prompt for another input.
4. Press the B-SKIP
or F-SKIP
Buttons to select the next song to be programmed.
5. Press the PROGRAM Button to store the second selection. You may repeat steps #2 - #4 to
program as many as 20 tracks.
6. Press the CD PLAY/PAUSE
programmed sequence.
Button to start playback in the
•
•
After all the programmed tracks have been played, the player stops but the programmed tracks
remain in the memory.
Press the PROGRAM Button followed by the PLAY/PAUSE
playback again.
Button to begin programmed
7. To cancel programmed play, in Stop mode press the STOP Button once or open the CD DOOR.
8. To turn the System off, press the POWER / STANDBY Button. The LCD backlight will go off.
DOCKING YOUR iPod
1. Insert the universal adaptor for the type of iPod you will dock.
2. To remove the adaptor to exchange for the others, press at the
back of the adaptor and pull it upward.
3. Press the POWER / STANDBY Button once to turn on the System.
The LCD backlight will light.
4. Press the FUNCTION Button to select iPod mode.
5. Your iPod can now be inserted onto the iPod connector by aligning the connector on the bottom
of the iPod onto the connector in the docking bay.
Note: Please be careful when seating the iPod into the docking to avoid damaging the 30-pin
connector on the iPod or in the Docking System.
6. The iPod will start playing automatically and also start charging.
Note: The iPod will only be charged when the System is powered by AC.
7. Select the previous or next music tracks by pressing the B-SKIP
repeatedly, and press the PLAY/PAUSE Button to play or pause.
or F-SKIP
Buttons
Note: The System’s LCD cannot show any music information (e.g. song name) of your iPod.
Please view the music information through your iPod display.
8. Adjust the sound level using the VOLUME CONTROL.
Note: The volume level cannot be adjusted using the volume control on your iPod after docking.
9. To remove the iPod from the unit, press and hold the PLAY/PAUSE
Button on the System for
a few seconds or simply press the STOP Button once to switch off the device and then gently
remove it from the dock connector.
10. To turn the Docking System off, press the POWER / STANDBY Button.
The LCD backlight will go off.
10
CD814 IPOD JENSEN IM 120V GB CUS11 11
2010/1/12
02:01:52
AUX OPERATION
You can playback your favorite music from your MP3 player or a portable digital audio player using
the AUX IN jack.
( Plug other
end into
external
AUX.
IN
1. Connect the headphone jack of your external device and the
AUX IN Jack located on the left side of this Docking System.
(The connection cable is not included.)
source )
2. Press the POWER / STANDBY
The LCD backlight will light.
Button once to turn on the System.
3. To enter the AUX function mode, press the FUNCTION Button to select AUX mode.
FUNCTION
4. Start to playing your MP3 player or other audio device.
5. Slowly adjust both the volume controls on your Docking System and the external device.
6. Turn off your MP3 player or other audio device etc. and unplug the AUX IN jack when finish
listening.
7. To turn the Docking System off, press the POWER / STANDBY Button. The LCD backlight will
go off.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent
lamps or motors.
3. If drop-outs or interruptions occur in the music during CD play,
or if the CD fails to play at all, its bottom surface may require cleaning.
Before playing, wipe the disc from the center outwards with a good soft cleaning cloth.
4. Unplug the unit from the electrical power outlet immediately in case of malfunction.
Cleaning the Unit
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture.
Use caution when cleaning and wiping the plastic parts.
•
•
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays
on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as
these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
11
CD814 IPOD JENSEN IM 120V GB CUS12 12
2010/1/12
02:01:53
TROUBLESHOOTING GUIDE
If you experience difficulties in the use of this Docking System, please check the following or call
1-800-777-5331 for Customer Service.
Symptom
Possible Problem
Solution
Unit does not respond
(no power)
AC Cord is not plugged properly into Re-plug the AC Cord into the wall outlet
a wall outlet or the connector is not and the connector into AC Socket on
plugged into the AC Socket on the the System.
back of the System
Wall outlet is not functioning.
Plug another device into the same outlet
to confirm the outlet is working.
Noise or sound distorted on
AM or FM broadcast
Station not tuned properly for
AM or FM.
Retune the AM or FM broadcast station.
FM: Telescopic antenna is not fully FM: Fully extend the FM telescopic
extended.
antenna.
AM: The bar antenna is not
positioned correctly
AM: Reposition the unit until the best
reception is obtained.Undock your iPod.
AM or FM no sound
Unit not in TUNER function mode. Press Function Button to select TUNER
Volume set at minimum
Increase Volume
Cannot dock iPod
properly
Using a wrong iPod insert
Make sure the dock insert is the proper
fit for your iPod.
iPod is not installed properly.
iPod is not installed properly.
Your iPod software is too old
Remove your iPod from the dock and
check for any obstruction on the
connectors in the dock and on your
iPod, then reseat it in the dock.
iPod does not respond
to the unit.
Remove your iPod from the dock and
check for any obstruction on the
connectors in the dock and on your
iPod, then reseat it in the dock.
Update software on your iPod. For
details, please visit
CD player will not play
CD skips while playing
Unit not in CD function mode.CD
is installed incorrectly. It the CD is
self-compiled, the media used may media and retest.
Select CD function mode.Insert CD with
label side up.Use better quality blank
not be compatible with the player.
Disc is dirty or scratched.
Wipe CD with clean cloth or use
another disc.
Intermittent sound from
CD Player
Dirty or defective disc
Dirty pick up lens
Clean or replace the defective discUse
a CD-lens cleaning disc to clean the
lens
Player is subject to excessive
shock or vibration
Relocate the player away from shock
or vibration
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
"Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod
and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this devise or its compliance with safety and regulatory
standards
12
CD814 IPOD JENSEN IM 120V GB CUS13 13
2010/1/12
02:01:53
90 DAY LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective
materials or factory workmanship for a period of 90 days from the date of original customer purchase
and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof,
except batteries, when it is returned to the SPECTRAService Department, accompanied by proof of the
date of original consumer purchase, such as a duplicated copy of a sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If
the product is repaired or replaced under warranty, the return charges will be at SPECTRA’s expense.
There are no other express warranties other than those stated herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is demonstrated
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the
descriptions and warnings covered within the owner’s manual or non-SPECTRA approved
modifications
c. Claims are made within the warranty period
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in
compliance with electrical codes or SPECTRA owner’s manual specifications, or failure to provide
reasonable care and necessary maintenance as outlined in the owner’s manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when products are
used in a nonresidential environment or installed outside the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and
send it prepaid by insured parcel post or UPS to SPECTRA at the address shown below. IF THE UNIT
IS RETURNED WITHIN THE WARRANTY PERIOD shown above, please include a proof of purchase
(dated cash register receipt) so that we may establish your eligibility for warranty service and repair
of the unit without cost. Also include a note with a description explaining how the unit is defective. A
customer service representative may need to contact you regarding the status of your repair, so include
your name, address, phone number and e-mail address to speed the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $25.00 to cover the
cost of repair, handling and return postage. All out of warranty returns must be sent prepaid.
It is recommended that you contact SPECTRAfirst at 1-800-777-5331 or by e-mail at [email protected] for
updated information on the unit requiring service. In some cases the model you have may be discontinued
and SPECTRA reserves the right to offer alternative options for repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL60634, USA.
1-800-777-5331
To register your product, visit the link below on the website to enter your information.
Printed in China
13
CD814 IPOD JENSEN IM 120V GB CUS14 14
2010/1/12
02:01:53
|