JT-P540
INSTRUCTION MANUAL
2002 jWIN® Electronics, Corp
4. The LCD will display “STORE TO---?”, Press one of the buttons,
for speed dialing 0-9 or M1 - M10 buttons for one-touch dialing.
5. Now the phone number is stored and the whole process is
completed.
T/P DIALING SELECTOR
You can choose the type of dialing by selecting TONE/PULSE mode.
Receiving a call
6. Repeat the above procedures to store other phone numbers.
1. Pick up the handset or press the “SPK” when the phone rings. The
LCD will display the talking time.
2. When you finish the phone call, put the handset back on the phone
base.
To Speed Dial from Stored Numbers
1. Pick up the handset or press “SPK” and hear the dial tone.
2. Press “MEMO” once and then press one of the buttons from 0 - 9.
The phone number will be dialed automatically from the memory.
Making a call
Method 1. Normal dialing
To Dial from One-Touch Memory Button
1. Pick up the handset or press “SPK” to hear a dial tone.
2. Dial the number you want to call.
3. Hang up the handset or press “SPK” again if you use hands-free
conversation.
1. Pick up the handset or press “SPK” and hear the dial tone.
2. Select from M1 - M10 and the stored phone number will be dialed
automatically from the memory.
CALLER ID FEATURES
To review Incoming Calls
Method 2 Pre-Dialing (On-Hook Dialing)
1. In the on-hook mode, dial the number you want to call, and you
can delete any wrong number by pressing DEL button.
2. Pick up the handset or press “SPK” once. The number shown on
the LCD will automatically dial out.
Press “UP” and “DOWN” to review incoming calls.
Incoming calls will be stored in the order they were received.
To Call Back from Caller ID List
1. When on hook, press “UP” and “DOWN” to review all the
memorized incoming call. Select the number you want to call
back.
Last number redial
Pick up the handset or pres “SPK”, and press “REDIAL” when you
hear the dial tone.
2. When the number to which you want to call back is displayed on
the LCD press “DIAL”. The LCD will display “PICKUP OR
ADJ.” (Pick up or adjust). If the selected number is a local call,
pick up the receiver and the current number will be dialed
automatically.
Flash Function
The Flash button replaces the hook switch when using features such as
call waiting and call forwarding.
3. In case the phone number is a long-distance number, add “1” (long-
distance call code) at the head automatically.
Storing Telephone Numbers
You can store 20 frequently used phone numbers, 10 one-touch and 10
speed dialing numbers.
1. Press “STORE” and the LCD will display “STORED NUMBER”.
2. Dial the number you want to store.
Message Box Indication
A Message icon will be displayed on the LCD to remind you that
someone has left a message for you. Your local telephone company
can provide this service. Contact your local telephone company to
subscribe to this service.
3. Press “STORE” one more time.
- 3 -
- 4 -
To Erase Individual Incoming Call Memory
1. Press “UP” and “DOWN” button to review calls you want to
erase.
2. Press DEL button once to display “DEL CALLS?”
3. Press DEL button one more time and the phone number displayed
on the LCD will be erased.
To Delete All Data at One Time
1. Press “DEL” and hold down for 3 seconds. LCD will display
“DEL ALL CALLS?”
2. Continue to hold down “DEL” button until the LCD displays “NO
CALLS.” This confirms that all of the incoming calls have been
deleted.
3. If there are any calls that have not been reviewed you will not be
able to delete the calls. The LCD will display “NEW MSG
PROTECT”.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precaution should
always be followed to reduce the risk of fire, electric shock, and injury.
This includes, but not limited to following:
1. Do not use this product near water. For example: near a bathtub,
wash bowl, kitchen sink, laundry tub, in a wet basement, or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the
leak.
4. Use only the power cord and batteries indicated in this manual. Do
not dispose batteries in a fire. They may explode. Check with local
codes for possible special disposal instructions.
SAVE THIS INSTRUCTION
- 5 -
|