S E R V I C E I N S T R U C T I O N S
1 - 8 0 0 - KEATING
INSTALLATION INSTRUCTIONS FOR
CUTTING BOARD CENTER SUPPORT
48” GRIDDLE & UP WITH 135° BEND
DLE
ER
CKET
1/4” LO
1/4-20
SCRE
(SEE
CUTTI
LOWE
SUPP
#0222
EAD
SCREW #010776 (SEE
STEP #4)
1.
Hold center support upper bracket
at angle and hook on to 135° bottom front
edge of griddle perimeter.
NOTE: CENTER SUPPORT
BRACKET MUST BE INSTALLED
BEFORE CUTTING BOARD IS
INSTALLED.
2.
3.
Align center of support bracket with center
of griddle perimeter.
Fasten lower bracket to upper bracket
using (2) hex head screws and
lockwashers.
4.
Tighten assembly in place using hex head
screw #010776. DO NOT OVERTIGHTEN.
cutboard
4-96
|