CD-RECEIVER
KDC-4021
KDC-4021V
KDC-3021
KDC-306
INSTRUCTION MANUAL
KDC-2092R
© B64-2112-00 (EY)
Contents
Safety precautions......................3
About RDS ..................................5
About CDs...................................5
General features .........................6
Power
Selecting the Source
Volume
Attenuator
Loudness
System Q
Audio Control
Speaker Setting
Switching Display
Theft Deterrent Faceplate
TEL Mute
CD/External disc control
features ..................................14
Playing CD
Playing External Disc
Fast Forwarding and Reversing
Track Search
Album Search
Track/Album Repeat
Track Scan
Power OFF Timer
Accessories...............................22
Installation Procedure ..............22
Connecting Wires to Terminals23
Installation ................................24
Troubleshooting Guide .............26
Specifications ...........................29
Random Play
Magazine Random Play
Disc Naming (DNPS)
Text/Title Scroll
Menu system.............................17
Menu System
Touch Sensor Tone
Manual Clock Adjustment
Synchronize Clock
DSI (Disabled System Indicator)
Selectable Illumination
News Bulletin with Timeout Setting
Local Seek
Tuner features.............................9
Tuning
Station Preset Memory
Auto Memory Entry
Preset Tuning
RDS features.............................11
Traffic Information
Tuning Mode
Presetting Volume for Traffic Information
PTY (Program Type)
Auto Memory Entry
AF (Alternative Frequency)
Program Type preset
Changing Language for PTY Function
Restricting RDS Region (Region Restrict
Function)
Auto TP Seek
Monaural Reception
Text Scroll
Disc Naming
— 2 —
Safety precautions
IMPORTANT INFORMATION
About the disc changer to be
connected:
2WARNING
2CAUTION
To prevent injury and/or fire, take the
following precautions:
• Insert the unit all the way until it is fully
locked in place. Otherwise it may fly out of
place during collisions and other jolts.
To prevent damage to the machine,
take the following precautions:
• Make sure to ground the unit to a negative
12V DC power supply.
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to "N".
To connect a disc changer having no "O-N"
switch to this unit, the converter cord CA-
DS100 and/or switching adapter KCA-S210A
are required as options.
A disc changer doesn't work when it is
connected without using these options.
If a model with no "O-N" switch is connected,
some unavailable functions and information
that cannot be displayed are generated.
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.
• Do not open the top or bottom covers of the
unit.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• Do not set the removed faceplate or the
faceplate case in areas exposed to direct
sunlight, excessive heat or humidity. Also
avoid places with too much dust or the
possibility of water splashing.
• To prevent deterioration, do not touch the
terminals of the unit or faceplate with your
fingers.
• Do not subject the faceplate to excessive
shock, as it is a piece of precision equipment.
• When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
• To prevent short circuits when replacing a
fuse, first disconnect the wiring harness.
• Do not place any object between the
faceplate and the unit.
• When extending the ignition, battery or
ground wires, make sure to use automotive-
grade wires or other wires with an area of
2
0.75mm (AWG18) or more to prevent wire
deterioration and damage to the wire
coating.
• To prevent short circuits, never put or leave
any metallic objects (e.g., coins or metal
tools) inside the unit.
• If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
• Make sure not to get your fingers caught
between the faceplate and the unit.
• Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it
contains glass parts.
• Do not touch the liquid crystal fluid if the
LCD is damaged or broken due to shock. The
liquid crystal fluid may be dangerous to your
health or even fatal.
If the liquid crystal fluid from the LCD
contacts your body or clothing, wash it off
with soap immediately.
You can damage both your unit and the CD
changer if you connect them incorrectly.
Do Not Load 8-cm (3-in.) CDs in the CD
slot
If you try to load an 8-cm CD with its adapter
into the unit, the adapter might separate from
the CD and damage the unit.
• During installation, do not use any screws
except for the ones provided. The use of
improper screws might result in damage to
the main unit.
— 3 —
Safety precautions
Lens Fogging
Cleaning the CD Slot
NOTE
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a whilst,
consult your Kenwood dealer.
As dust can accumulate in the CD slot, clean it
occasionally. Your CDs can get scratched if
you put them in a dusty CD slot.
• If you experience problems during
installation, consult your Kenwood dealer.
• If the unit does not seem to be working
right, try pressing the reset button first. If
that does not solve the problem, consult
your Kenwood dealer.
• Press the reset button if the Disc auto
changer fails to operate correctly. Normal
operatin should be restored.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
The marking of products using lasers
(Except for some areas)
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain
off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the
CLASS 1
LASER PRODUCT
Reset button
• Characters in the LCD may become difficult
to read in temperatures below 41 ˚F (5 ˚C).
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It means
that the unit is utilizing laser beams that are of
a weaker class. There is no danger of
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
hazardous radiation outside the unit.
— 4 —
About RDS
About CDs
RDS (Radio Data System)
Handling CDs
• Don’t touch the recording surface of the CD.
CD cleaning
Clean from the center of the disc and move
outward.
When listening to an RDS station, the
programme service name of the station is
displayed, advising you quickly which station
is being received.
RDS (Radio Data System) stations also
transmit alternative frequency data for the
same station. When you are making long
trips, this function automatically switches to
the particular frequency with the best
reception for the particular network of
stations that you want to listen to. The data is
automatically stored, allowing you to switch
quickly to another RDS stations, broadcasting
the same programme, that has better
reception. These include stations stored in the
station preset memory that you often listen
to.
Removing CDs
When removing CDs from this unit pull them
out horizontally.
• CD-R and CD-RW are easier to damage than
a normal music CD. Use a CD-R or a CD-RW
after reading the caution items on the
package etc.
• Don’t stick tape etc. on the CD.
Also, don’t use a CD with tape stuck on it.
CDs that can’t be used
• CDs that aren’t round can’t be used.
When using a new CD
If the CD center hole or outside rim has burrs,
use it after removing them with a ball pen etc.
Enhanced Other Network
Stations that offer <Enhanced Other
Network> also transmit information about
other RDS stations that have traffic
information. When you are tuned to a station
that is not transmitting traffic information, but
another RDS station starts transmitting a
traffic bulletin, the tuner automatically
switches to the other station for the duration
of the bulletin.
• CDs with coloring on the recording surface
or that are dirty can’t be used.
• Don’t use CDs without disc mark
.
Burrs
• A CD-R or CD-RW that hasn’t been finalized
can’t be played. (For the finalization process
refer to your CD-R/CD-RW writing software,
and your CD-R/CD-RW recorder instruction
manual.)
Burrs
Alarm
When an emergency transmission
(announcing disasters, etc.) is sent, all current
functions are interrupted to allow the warning
to be received.
CD storage
• Don’t place them in direct sunlight (On the
seat or dashboard etc.) and where the
temperature is high.
CD accessories
Don’t use disc type accessories.
• Store CDs in their cases.
— 5 —
General features
Power
Release button
ud
AM
FM
Turning ON the Power
4
¢
Press the [SRC] button.
Turning OFF the Power
Press the [SRC] button for at least 1 second.
Selecting the Source
Press the [SRC] button.
Source required
SRC
ATT/
LOUD
CLK
Q/
AUD
Display
Tuner
CD
"TUNER"
"CD"
External disc
"DISC"
(Function of the KDC-4021/KDC-4021V)
Standby (Illumination only mode)
"ALL OFF"
LOUD indicator
This unit automatically turns full power OFF after 20 minutes lapses
in Standby mode in order to save the vehicles battery.
The time until full power OFF can be set in <Power OFF Timer>
(page 21).
ATT indicator
SYSTEM Q indicator
Volume
Increasing Volume
Press the [u] button.
Decreasing Volume
Press the [d] button.
— 6 —
Easy
"EASY"
"SCAN"
Attenuator
Turning the volume down quickly.
Scan of Flat — Easy
• Each setting value is changed with the <Speaker setting> (page
8).
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it’s ON, the "ATT" indicator blinks.
First, select the speaker type with the Speaker setting.
• When the System Q setting is changed, the Bass, Middle, and
Treble set in audio control replace the System Q values.
Loudness
Audio Control
Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
1 Select the source for adjustment
Press the [SRC] button.
2 Enter Audio Control mode
Press the [AUD] button for at least 1 second.
When it’s ON, "LOUD" indicator is ON.
3 Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
System Q
You can recall the best sound setting preset for different types of
the music.
4 Adjust the Audio item
Press the [4] or [¢] button.
Adjustment Item
Display
Range
1 Select the source to set
Press the [SRC] button.
Bass level
Middle level
Treble level
Balance
"BAS"
"MID"
"TRE"
"BAL"
"FAD"
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
2 Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound setting
Fader
Display
5 Exit Audio Control mode
Flat
"FLAT"
Press the [AUD] button.
Rock
Top 40
Pops
Jazz
"ROCK"
"TOP40"
"POPS"
"JAZZ"
— 7 —
General features
Clock
Speaker Setting
In CD & External disc source
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
Information
Display
Track Time
Disc name*
Disc title*
Track title*
Clock
1 Enter Standby
"D-NAME"
"D-TITLE"
"T-TITLE"
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Speaker Setting mode
Press the [Q] button.
*: Function of the KDC-4021/KDC-4021V <In External disc control
mode>
3 Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Speaker type
Display
OFF
"SP OFF"
"SP OEM"
"SP 6/6x9"
"SP 5/4"
For the OEM speaker
For 6 & 6x9 in. speaker
For 5 & 4 in. speaker
Removing the Faceplate
Press the Release button.
The faceplate is unlocked, allowing you to detach it.
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate in
its special storage case while detached.
4 Exit Speaker Setting mode
Press the [Q] button.
• Do not expose the faceplate or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Reattaching the Faceplate
Switching Display
1 Align the projections on the unit with the grooves on the
faceplate.
Switching the information displayed.
Press the [CLK] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information
Display
Program Service name or Frequency
— 8 —
Tuner features
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
FM
AM
4
¢
TEL Mute
The audio system automatically mutes when a call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
SRC
#1 - 6
MENU
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system comes back
ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system comes back
ON.
Band display
Preset station number
AUTO indicator
Frequency display
ST indicator
— 9 —
Tuner features
Tuning
Auto Memory Entry
Selecting the station.
Putting a station with good reception in the memory
automatically.
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
1 Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2 Select the band
2 Enter Menu mode
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "A-MEMORY" display.
Frequency range (KDC-2092R only)
- FM1: 65.0 MHz — 74.0MHz
- FM2, 3: 87.5 MHz — 108.0MHz
4 Open Auto Memory Entry
3 Tune up or down band
Press the [4] or [¢] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
Press the [4] or [¢] button.
• During reception of stereo stations the "ST" indicator is ON.
• Only monaural reception is available for the FM1. (KDC-2092R
only)
• When the <AF Function> (page 20) is ON, only RDS stations are
put in the memory.
• When Auto Memory Entry is done in the FM2 band, the RDS
stations preset in the FM1 band aren't put in the memory.
Likewise, when it is done in the FM3 band, RDS stations preset in
FM1 or FM2 aren't put in the memory.
Station Preset Memory
Putting the station in the memory.
1 Select the band
Press the [FM] or [AM] button.
2 Select the frequency to put in the memory
Press the [4] or [¢] button.
3 Put the frequency in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.
— 10 —
RDS features
KDC-2092R: Available in the FM2 and FM3 only
Preset Tuning
Calling up the stations in the memory.
FM/
PTY
AM
4
¢
1 Select the band
Press the [FM] or [AM] button.
2 Call up the station
Press the [#1] — [#6] button.
#1 - 6
CLK
TI/
VOL ADJ
RDS indicator
PTY indicator
NEWS indicator
TI indicator
— 11 —
RDS features
KDC-2092R: Available in the FM2 and FM3 only
Traffic Information
PTY (Program Type)
Switching to traffic information automatically when a traffic
bulletin starts even when you aren't listening to the radio.
Selecting the Program Type and searching for a station.
1 Enter PTY mode
Press the [PTY] button for at least 1 second.
During PTY mode the "PTY" indicator is ON.
Press the [TI] button.
Each time the button is pressed the Traffic Information function
turns ON or OFF.
When it's ON, "TI" indicator is ON.
This function can't be used during a traffic bulletin or AM reception.
When a traffic information station isn't being received the "TI"
indicator blinks.
When a traffic bulletin starts, "TRAFFIC" is displayed it and it
switches to traffic information.
2 Select the Program Type
Press the [FM] or [AM] button.
Each time the button is pressed the Program Type switches as
shown below.
During reception of a AM station when the Traffic Information
function is turned ON, it switches to a FM station.
No. Program Type
Display
1.
2.
3.
4.
5.
6.
7.
8.
9.
Music
Speech
News
Current Affairs
Information
Sport
Education
Drama
"MUSIC"
"SPEECH"
"NEWS"
"AFFAIRS"
"INFO"
"SPORT"
"EDUCATE"
"DRAMA"
"CULTURE"
"SCIENCE"
"VARIED"
Receiving other traffic information stations
Press the [4] or [¢] button.
Traffic information station switching can be done when listening to
the radio.
Culture
Presetting Volume for Traffic Information
Setting the volume during Traffic Information.
10. Science
11. Varied
12. Pop Music
"POP M"
1 Receive the station.
2 Set the volume you want.
13. Rock Music
14. Easy Listening Music
15. Light Classical
16. Serious Classical
17. Other Music
18. Weather
"ROCK M"
"EASY M"
"LIGHT M"
"CLASSICS"
"OTHER M"
"WEATHER"
"FINANCE"
"CHILDREN"
3 Preset the volume
Press the [VOL ADJ] button for at least 2 seconds.
The volume level display blinks 1 time.
19. Finance
20. Children's programs
— 12 —
21. Social Affairs
22. Religion
23. Phone In
24. Travel
25. Leisure
26. Jazz Music
27. Country Music
28. National Music
29. Oldies Music
30. Folk Music
31. Documentary
"SOCIAL"
calling it up quickly.
"RELIGION"
"PHONE IN"
"TRAVEL"
"LEISURE"
"JAZZ"
"COUNTRY"
"NATION M"
"OLDIES"
"FOLK M"
"DOCUMENT"
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY(Program Type)> (page 12).
2 Preset the Program Type
Press the [#1] — [#6] button for at least 2 seconds.
Calling up the preset Program Type
1 Enter PTY mode
Refer to <PTY(Program Type)> (page 12).
2 Call up the Program Type
Press the [#1] — [#6] button.
• Speech and Music include the Program type shown below.
Music: No.12 — 17, 26 — 30
Speech: No.3 — 11, 18 — 25, 31
• The Program Type can be put in the [#1] — [#6] button memory
and called up quickly. Refer to the <Program Type preset> (page
13).
• The display language can be changed. Refer to <Changing
Language for PTY Function> (page 13).
Changing Language for PTY Function
Selecting the Program Type display language.
3 Search for the selected Program Type station
Press the [4] or [¢] button.
When you want to search for other stations press the [4] or
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 12).
[¢] button again.
When the selected Program Type isn't found, "NO PTY" is displayed.
Select another Program Type.
2 Enter Changing Language mode
Press the [CLK] button.
4 Exit PTY mode
Press the [PTY] button for at least 1 second.
3 Select the language
Press the [#1] — [#3] button.
Button
Language
[#1]
[#2]
[#3]
English
French
German
Program Type preset
Putting the Program Type in the Preset button memory and
4 Exit Changing Language mode
Press the [CLK] button.
— 13 —
CD/External disc control features
Playing CD
FM/
DISC+
¢
AM/
DISC-
When a CD is inserted
Press the [SRC] button.
Select the "CD" display.
0
4
When a CD is inserted, the "IN" indicator is ON.
Eject the CD
Press the [0] button.
3 in. (8cm) CD cannot be played. Using an adapter and inserting
them into this unit can cause damage.
SRC
SCAN
REP M.RDM
SCRL RDM
MENU
Function of the KDC-4021/KDC-4021V
Playing External Disc
Playing discs set in the optional accessory disc player connected
to this unit.
Track number
IN indicator
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Display
Disc player
Track time
"CD-2"
"DISC"
"DISC"
CD player
CD changer
MD changer
Disc number
• Disc #10 is displayed as "0".
• The functions that can be used and the information that can be
displayed will differ depending on the external disc players being
connected.
— 14 —
shown below.
Repeat play
Track Repeat
Fast Forwarding and Reversing
Display
Fast Forwarding
"REP ON"/
"TREP ON"
"DREP ON"
"REP OFF"
Hold down on the [¢] button.
Release your finger to play the disc at that point.
Album Repeat (Function of disc changer)
OFF
Reversing
Hold down on the [4] button.
Release your finger to play the disc at that point.
Track Scan
Playing the first part of each song on the disc you are listening
to and searching for the song you want to listen to.
Track Search
Selecting the song you want to hear.
Press the [4] or [¢] button.
1 Start Track Scan
Press the [SCAN] button.
"SCAN ON"/"TSCN ON" is displayed.
2 Release it when the song you want to listen to is played
Press the [SCAN] button.
Function of the KDC-4021/KDC-4021V
Album Search (Function of disc changer)
Selecting the disc you want to hear.
Random Play
Playing all the songs on the disc in random order.
Press the [DISC–] or [DISC+] button.
Press the [RDM] button.
Each time the button is pressed Random Play turns ON or OFF.
When it's ON, "RDM ON" is displayed.
When the [¢] button is pressed, the next song select starts.
Track/Album Repeat
Replaying the track/disc you're listening to.
Press the [REP] button.
Each time the button is pressed the Repeat Play switches as
— 15 —
CD/External disc control features
Function of the KDC-4021/KDC-4021V
6 Select the characters
Press the [FM] or [AM] button.
Magazine Random Play
(Function of disc changer)
7 Repeat steps 5 through 6 and attach a name.
Play the songs on all the discs in the disc changer in random
order.
8 Exit Menu mode
Press the [MENU] button.
Press the [M.RDM] button.
Each time the button is pressed the Magazine Random Play turns
ON or OFF.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Media that you can attach a name to
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The name of a CD can be changed by the same operation you
used to name it.
When it's ON, "MRDM ON" is displayed.
When the [¢] button is pressed, the next song select starts.
Function of the KDC-4021/KDC-4021V
Function of the KDC-4021/KDC-4021V
Text/Title Scroll
Disc Naming (DNPS)
(Function of disc changer)
Attaching a title to a CD.
Scrolling the displayed CD text or MD title.
Press the [SCRL] button.
1 Play the disc you want to attach a name to
A title can't be attached to a MD.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select Name set mode
Press the [FM] or [AM] button.
Select the "NAME SET" display.
4 Enter Name set mode
Press the [4] or [¢] button for at least 2 seconds.
5 Move the cursor to the enter character position
Press the [4] or [¢] button.
— 16 —
Menu system
Menu System
Setting during operation beep sound etc. functions.
The Menu system basic operation method is explained here. The
reference for the Menu items and their setting content is after
this operation explanation.
FM
AM
4
¢
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select the menu item
Press the [FM] or [AM] button.
Example: When you want to set the beep sound select the
"BEEP" display.
MENU
3 Set the menu item
Press the [4] or [¢] button.
Example: When "BEEP" is selected, each time the button is
pressed it switches "BEEP ON" or "BEEP OFF". Select 1
of them as the setting.
Menu display
You can continue by returning to step 2 and setting other items.
4 Exit Menu mode
Press the [MENU] button.
When other items that are applicable to the basic operation method
above are displayed afterwards their setting content chart is
entered. (Normally the uppermost setting in the chart is the original
setting.)
Also, the explanation for items that aren't applicable (<Manual Clock
Adjustment>etc.) are entered step by step.
AUTO indicator
RDS indicator
NEWS indicator
— 17 —
Menu system
Touch Sensor Tone
Synchronize Clock
Setting the operation check sound (beep sound) ON/OFF.
Synchronizing the RDS station time data and this unit's clock.
Display
Setting
Display
Setting
"BEEP ON"
"BEEP OFF"
Beep is heard.
Beep canceled.
"SYNC ON"
"SYNC OFF"
Synchronizes the time.
Adjust the time manually.
It takes 3 to 4 minutes to synchronize the clock.
Manual Clock Adjustment
This adjustment can be done when the <Synchronize Clock> (page
18) is set as OFF.
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
1 Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
Display
Setting
"DSI ON"
"DSI OFF"
LED flashes.
LED OFF.
2 Enter Clock Adjust mode
Press the [4] or [¢] button for at least 2 seconds.
The clock display blinks.
3 Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
Function of the KDC-4021/KDC-4021V
Selectable Illumination
Selecting the button illumination color as green or red.
4 Exit Clock adjustment mode
Press the [MENU] button.
Display
Setting
"COL GRN"
"COL RED"
The illumination color is green.
The illumination color is red.
— 18 —
"LO.S ON"
The local seek function is ON.
News Bulletin with Timeout Setting
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
Tuning Mode <In Tuner mode>
Sets the tuning mode.
"NEWS OFF"
"NEWS 00M"
Tuning mode
Display
Operation
"NEWS 90M"
Auto seek
"AUTO 1" Automatic search for a station.
Preset station seek "AUTO 2" Search in order of the stations
in the Preset memory.
When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin
Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.
Manual
"MANUAL" Normal manual tuning control.
• If you choose the "20M" setting, further news bulletins will not be
received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for traffic
information (page 12).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
Auto Memory Entry <In Tuner mode>
For the operation method refer to <Auto Memory Entry> (page
10).
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
Local Seek <In Tuner mode>
Only stations whose reception is good are searched for in auto
seek tuning.
Display
Setting
"LO.S OFF"
The local seek function is OFF.
— 19 —
Menu system
AF (Alternative Frequency)
Auto TP Seek
When poor reception is experienced, automatically switch to
another frequency broadcasting the same program in the same
RDS network with better reception.
When the TI function is ON and poor reception conditions are
experienced when listening to a traffic information station,
another traffic information station with better reception will be
searched for automatically.
Display
Setting
Display
Setting
"AF ON"
"AF OFF"
The AF function is ON.
The AF function is OFF.
"ATPS ON"
"ATPS OFF"
The Auto TP Seek Function is ON.
The Auto TP Seek Function is OFF.
When the AF function is ON, the "RDS" indicator is ON.
When no other stations with stronger reception are available for the
same program in the RDS network, you may hear the incoming
broadcast in bits and snatches. Turn OFF the AF function in such a
case.
KDC-2092R: Available in the FM2 and FM3 only
Monaural Reception <In FM reception>
Noise can be reduced when stereo broadcasts are received as
monaural.
Restricting RDS Region
Display
Setting
(Region Restrict Function)
"MONO OFF"
"MONO ON"
The monaural reception is OFF.
The monaural reception is ON.
You can choose whether or not to restrict the RDS channels,
received with the AF function for a particular network, to a
specific region.
Display
Setting
"REG ON"
"REG OFF"
The Region Restrict Function is ON.
The Region Restrict Function is OFF.
Function of the KDC-4021/KDC-4021V
Text Scroll <In External disc control mode>
Setting the displayed text scroll.
Sometimes stations in the same network broadcast different
programs or use different program service names.
Display
Setting
"SCL MANU"
"SCL AUTO"
Doesn't scroll.
Scrolls when the display changes.
— 20 —
The text scrolled is shown below.
• CD text
• MD title
Function of the KDC-4021/KDC-4021V
Disc Naming <In External disc control mode>
For the setting method refer to the <Disc Naming> (page 16).
Power OFF Timer
Setting the timer to turn this unit's power OFF automatically
when Standby mode continues.
Using this setting can save the vehicle's battery power.
Display
Setting
"OFF – – –"
Power OFF Timer function is OFF.
"OFF 20M"
(Original setting)
Turns the power OFF after 20 minutes.
"OFF 40M"
"OFF 60M"
Turns the power OFF after 40 minutes.
Turns the power OFF after 60 minutes.
— 21 —
Accessories
2CAUTION
Number of items
External view
• If your car is not prepared for this special connection-system,
consult your Kenwood dealer.
• Only use antenna conversion adapters (ISO-JASO) when the
antenna cord has an ISO plug.
1
2
3
..........................................1
• Make sure that all wire connections are securely made by
inserting jacks until they lock completely.
• If your vehicle's ignition does not have an ACC position, or if the
ignition wire is connected to a power source with constant
voltage such as a battery wire, the power will not be linked with
the ignition (i.e., it will not turn on and off along with the
ignition). If you want to link the unit's power with the ignition,
connect the ignition wire to a power source that can be turned
on and off with the ignition key.
..........................................2
..........................................1
• If the fuse blows, first make sure that the wires have not caused
a short circuit, then replace the old fuse with one with the same
rating.
The use of any accessories except for those provided might result in
damage to the unit. Make sure only to use the accessories shipped with
the unit, as shown above.
• Insulate unconnected wires with vinyl tape or other similar
material. To prevent short circuits, also do not remove the caps
on the ends of the unconnected wires or the terminals.
• Connect the speaker wires correctly to the terminals to which
they correspond. The unit may receive damage or fail to work if
you share the - wires and/or ground them to any metal part in
the car.
• After the unit is installed, check whether the brake lamps,
indicators, wipers, etc. on the car are working properly.
• If the console has a lid, make sure to install the unit so that the
faceplate does not hit the lid when closing and opening.
Installation Procedure
1. To prevent short circuits, remove the key from the ignition and
disconnect the - terminal of the battery.
2. Make the proper input and output wire connections for each unit.
3. Connect the wire on the wiring harness.
• Mount the unit so that the mounting angle is 30° or less.
4. Take Connector B on the wiring harness and connect it to the
speaker connector in your vehicle.
5. Take Connector A on the wiring harness and connect it to the
external power connector on your vehicle.
6. Connect the wiring harness connector to the unit.
7. Install the unit in your car.
8. Reconnect the - terminal of the battery.
9. Press the reset button.
— 22 —
Connecting Wires to Terminals
10
Rear left output (White)
Rear right output (Red)
4
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3) 2
KENWOOD disc changer input (KDC-4021/4021V only) 14
To connect the Disc changer, consult your
Disc changer manual. 15
REAR
L
Antenna Cord (ISO) 1
R
Fuse (10A) 13
FM/AM antenna
input 3
Wiring harness
(Accessory1) 16
Connector Function Guide
Pin Numbers for
ISO Connectors
Wire Color
Functions
17
Connect to the terminal that is
grounded when either the
telephone rings or during
conversation. 21
TEL mute wire (Brown)
External Power
Connector
TEL MUTE
Battery
Power Control
Ignition (ACC)
Earth (Ground)
Connection
Yellow
Blue/White
Red
A–4
A–5
A–7
A–8
To connect the
KENWOOD navigation
system, consult your
navigation manual. 22
Battery wire (Yellow) 6
Black
If no connections are
made, do not let the wire
come out from the tab. 18
Ignition wire (Red) 7
Speaker
Connector
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Power control/ Motor
antenna control wire
(Blue/White) 20
Connect either to the power
control terminal when using
the optional power amplifier,
or to the antenna control
terminal in the vehicle. 23
A–7 Pin (Red) 8
P.CONT
ANT.CONT
A–4 Pin (Yellow) 9
8
7
6
5
4
3
2
1
Connector A
8
7
6
5
4
3
2
1
Connector B
Green/Black
— 23 —
Connecting Wires to Terminals
Installation
■ Installation
2WARNING
Connecting the ISO Connector (see p.23)
The pin arrangement for the ISO connectors depends on the type of
vehicle you drive. Make sure to make the proper connections to
prevent damage to the unit.
Firewall or metal support
The default connection for the wiring harness is described in 1 below.
If the ISO connector pins are set as described in 2 or 3, make the
connection as illustrated.
Screw (M4X8)
(commercially
available)
1 (Default setting) The A-7 pin (red) of the vehicle's ISO connector
is linked with the ignition, and the A-4 pin (yellow) is connected to
the constant power supply.
Unit
Vehicle
Ignition cable (Red)
A–7 Pin (Red)
Bend the tabs of the
mounting sleeve
with a screwdriver or
similar utensil and
attach it in place.
Battery cable (Yellow)
A–4 Pin (Yellow)
Self-tapping
screw
(commercially
available)
Metal mounting
strap
(commercially
available)
2 The A-7 pin (red) of the vehicle's ISO connector is connected to
the constant power supply, and the A-4 pin (yellow) is linked to
the ignition.
Unit
Vehicle
Ignition cable (Red)
A–7 Pin (Red)
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (eg, the sound may skip).
Battery cable (Yellow)
A–4 Pin (Yellow)
3 The A-4 pin (yellow) of the vehicle's ISO connector is not
connected to anything, while the A-7 pin (red) is connected to the
constant power supply (or both the A-7 (red) and A-4 (yellow) pins
are connected to the constant power supply).
Unit
Vehicle
Ignition cable (Red)
A–7 Pin (Red)
Battery cable (Yellow)
A–4 Pin (Yellow)
When the connection is made as in 3 above, the unit's power will not
be linked to the ignition key. For that reason, always make sure to turn
off the unit's power when the ignition is turned off.
To link the unit's power to the ignition, connect the ignition cable
(ACC...red) to a power source that can be turned on and off with the
ignition key.
— 24 —
■ Removing the hard rubber frame
■ Removing the Unit
1 Refer to the section “Removing the hard rubber frame” and then
remove the hard rubber frame.
1 Engage the catch pins on the removal tool and remove the two
locks on the lower level.
Lower the frame and pull it forward as shown in the figure.
2 Remove the screw (M4×8) on the back panel.
3 Insert the two removal tools deeply into the slots on each side,
as shown.
Catch
Lock
Accessory2 Removal tool
Screw (M4X8)
(commercially
available)
Accessory2 Removal tool
2 When the lower level is removed, remove the upper two
locations.
4 Lower the removal tool
toward the bottom, and pull
out the unit halfway while
pressing towards the inside.
Be careful to avoid injury from the catch pins on the removal tool.
5 Pull the unit all the way out
with your hands, being
careful not to drop it.
The frame can be removed from the top side in the same manner.
— 25 —
Troubleshooting Guide
What might seem to be a malfunction in your unit may
just be the result of slight misoperation or miswiring.
Before calling service, first check the following table
for possible problems.
? Even if Loudness is turned ON, high-pitched tone isn't compensated
for. 17
✔
Tuner source is selected.
☞ High-pitched tone isn't compensated for when in Tuner source.
? No sound can be heard, or the volume is low.
General
✔
The fader or balance settings are set all the way to one side.21
☞ Center the fader and balance settings.
? The power does not turn ON.01
✔
The input/output wires or wiring harness are connected incorrectly.22
☞ Reconnect the input/output wires or the wiring harness correctly.
See the section on <Connecting Wires to Terminals>.
✔
The fuse has blown.
☞ After checking for short circuits in the wires, replace the fuse with
one with the same rating.
✔
No ACC position on vehicle ignition.02
? The sound quality is poor or distorted.25
☞ Connect the same wire to the ignition as the battery wire.
✔
One of the speaker wires is being pinched by a screw in the car.
☞ Check the speaker wiring.
? Nothing happens when the buttons are pressed.04
✔
The speakers are not wired correctly.27
✔
The computer chip in the unit is not functioning normally.
☞ Press the reset button on the unit (page 4).
☞ Reconnect the speaker wires so that each output terminal is
connected to a different speaker.
? There’s a source you can’t switch.06
? The Touch Sensor Tone doesn’t sound.34
✔
There’s no CD inserted.
☞ Set the media you want to listen to. If there’s no media in this
unit, you can't swhich to each source.
✔
The preout jack is being used.
☞ The Touch Sensor Tone can’t be output from the preout jack.
? Even though Synchronize Clock is ON, the clock can’t be adjusted.35
? The memory is erased when the ignition is turned OFF.10
✔
The received RDS station isn’t sending time data.
✔
The battery wire has not been connected to the proper terminal.
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
☞ Receive another RDS station.
Tuner source
✔
The ignition and battery wire are incorrectly connected.11
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
? Radio reception is poor.39
✔
✔
The car antenna is not extended.
☞ Pull the antenna out all the way.
? The TEL mute function does not work.15
✔
The TEL mute wire is not connected properly.
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
The antenna control wire is not connected.40
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
? The TEL mute function turns ON even though the TEL mute wire is
? It isn't the set Traffic information sound volume. 43
not connected.16
✔
The set sound volume is less than the tuner sound volume.
☞ If the tuner sound volume is louder than the set sound volume,the
tuner sound volume is used.
✔
The TEL mute wire is touching a metal part of the car.
☞ Pull the TEL mute wire away from the metal part of the car.
— 26 —
Disc source
? Can’t remove disc.64
✔
The cause is that more than 10 minutes has elapsed since the vehicle
? "AUX" is displayed without achieving External disc control mode.50
ACC switch was turned OFF.
✔
✔
O-N switch is set to "O" side.
☞ The disc can only be removed within 10 minutes of the ACC
switch being turned OFF. If more than 10 minutes has elapsed,
turn the ACC switch ON again and press the Eject button.
☞ Set the switch to "N" side.
Unsupported disc changer is connected.51
☞ Connect the supported disc changer. (page 3)
? The disc won’t insert.65
? The specified disc does not play, but another one plays instead.52
✔
There’s already another disc inserted.
✔
✔
✔
The specified CD is quite dirty.
☞ Press the [0] button and remove the disc.
☞ Clean the CD.
? Track Search can't be done.66-2
The CD is upside-down.53
☞ Load the CD with the labeled side up.
✔
For the albums first or last song.
☞ For each album, Track Search can't be done in the backward
direction for the first song or in the forward direction for the last
song.
The disc is loaded in a different slot from that specified.54
☞ Eject the disc magazine and check the number for the specified
disc.
If the following situations, consult your nearest service
center:
✔
The disc is severely scratched.55
☞ Try another disc instead.
• Even though the disc changer is connected, the Disc Changer source is
not ON, with "AUX" showing in the display during the Changer Mode.
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,
KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the
Auxiliary input is entered when switching modes.
? The specified track will not play.58
✔
Random play or magazine random play has been selected.
☞ Turn off random play or magazine random play.
? Track repeat, disc repeat, track scan, random play, and magazine
random play start by themselves.59
✔
The setting is not canceled.
☞ The settings for these functions remain on until the setting to off
or the disc ejected, even if the power is turned off or the source
changed.
? Cannot play CD-R or CD-RW.60
✔
Finalization processing is not being conducted for CD-R/CD-RW.
☞ Conduct finalization processing with CD recorder.
✔
A non-compatible CD changer is being used to play the CD-R/CD-
RW.61
☞ Use a CD changer compatible with CD-R/CD-RW to play.
? A CD ejects as soon as it is loaded.62
✔
The CD is upside-down.
☞ Load the CD with the labeled side up.
✔
The CD is quite dirty.63
☞ Clean the CD, referring to the section on <CD cleaning> (page 5).
— 27 —
Troubleshooting Guide
HOLD:
The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.E0d
➪ Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
The messages shown below display your systems
condition.
EJECT:
No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.E01
➪ Load the disc magazine properly.
No CD in the unit.
➪ Insert the CD.
NO NAME:
NO TITLE:
NO TEXT:
LOAD:
Attempted to display DNPS during the CD play having
no disc names preset.E51
NO DISC:
E-04:
No disc has been loaded in the disc magazine.E02
➪ Load a disc into the disc magazine.
Attempted to display the disc title or track title while
the MD having no MD title is being played.E53
No disc has been loaded in the disc magazine.E04
➪ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
Attempted to display the disc text or track text while
the CD having no CD text is being played.E54
➪ Clean the CD and load it correctly.
Discs are being exchanged in the Disc changer.E57
BLANK:
Nothing has been recorded on the MD.E10
NO ACCESS: After setting it in the Disc Changer, DNPP was done
without having it been played at least 1 time.E58
NO TRACK: No tracks are recorded on the MD, although it has a
title.E11
IN (Blink):
The CD player section is not operating properly.E59
➪ Reinsert the CD. If the CD cannot be ejected or the
display continues to flash even when the CD has
been properly reinserted, please switch off the
power and consult your nearest service center.
NO PANEL:
E-77:
The faceplate of the slave unit being connected to
this unit has been removed.E30
➪ Replace it.
The unit is malfunctioning for some reason.E77
➪ Press the reset button on the unit. If the "E-77"
code does not disappear, consult your nearest
service center.
E-99:
Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.E99
➪ Check the disc magazine. And then press the reset
button on the unit. If the "E-99" code does not
disappear, consult your nearest service center.
— 28 —
Specifications
Specifications subject to change without notice.
FM tuner section
Audio section
Frequency range
Maximum output power.................................................50 W x 4
Output power (DIN 45324, +B=14.4V)...........................30 W x 4
Tone action
(50 kHz space).....................................87.5 MHz – 108.0 MHz
(30 kHz space) <KDC-2092R:FM1>.......65.0 MHz – 74.0 MHz
Usable sensitivity (S/N = 26dB)
.........................................................................0.7 µV/75 Ω
<KDC-2092R:FM1>...............................................1.4 µV/75 Ω
Quieting Sensitivity (S/N = 46dB)
.........................................................................1.6 µV/75 Ω
<KDC-2092R:FM1>...............................................1.4 µV/75 Ω
Frequency response ( 3 dB).................................30 Hz – 15 kHz
Signal to Noise ratio (MONO)..............................................65 dB
Selectivity (DIN) ( 400 kHz)..............................................≥ 80 dB
Stereo separation (1 kHz)
Bass : ...............................................................100 Hz 10 dB
Middle : ..............................................................1 kHz 10 dB
Treble : .............................................................10 kHz 10 dB
Preout level / Load (during disc play)....................1800 mV/10 kΩ
Preout impedance (during disc play) ................................≤ 600 Ω
General
Operating voltage (11 – 16V allowable) ..............................14.4 V
Current consumption.............................................................10 A
Installation Size (W x H x D) ..........................182 x 53 x 157 mm
7-3/16 x 2-1/16 x 6-3/16 inch
..................................................................................35 dB
<KDC-2092R:FM1> ............................................................–––
Weight...................................................................3.1 lbs (1.4 kg)
MW tuner section
Frequency range (9 kHz space) .....................531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB) ...........................................25 µV
LW tuner section
Frequency range .............................................153 kHz – 281 kHz
Usable sensitivity (S/N = 20dB) ...........................................45 µV
CD player section
Laser diode....................................................GaAlAs (λ=780 nm)
Digital filter (D/A)......................................8 Times Over Sampling
D/A Converter .......................................................................1 Bit
Spindle speed...............................................500 – 200 rpm (CLV)
Wow & Flutter........................................Below Measurable Limit
Frequency response ( 1 dB).................................10 Hz – 20 kHz
Total harmonic distortion (1 kHz) ......................................0.01 %
Signal to Noise ratio (1 kHz) ................................................96 dB
Dynamic range ....................................................................93 dB
Channel separation..............................................................85 dB
— 29 —
|