SIRIUS SATELLITE RADIO TUNER
KTC-SR903
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help
you obtain the best performance from your new sirius satellite
radio tuner.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below.
Refer to the model and serial numbers whenever you call upon your
KENWOOD dealer for information or service on the product.
Model KTC-SR903 Serial number
© PRINTED IN JAPAN B64-2876-00/00 (K) (A)
What is Sirius Satellite Radio?
Sirius is radio the way it was meant to be: up to 100 new channels
of digital quality programming delivered to listeners coast to coast
via satellite. That means 60 channels of completely commercial-free
music. Plus up to 40 more channels of news, sports, and
entertainment from names like CNBC, Discovery, SCI-FI Channel,
A&E, House of Blues, NPR, Speedvision and Comedy World.
NOTE
When initially activating your subscription, if you have changed your
subscription, or if SIRIUS itself has updated streaming broadcast
service, automatic reselection of reception operates by following the
current channel setting.
At this time, audio reception may be momentarily interrupted.
However, this interruption is not caused by radio interference or
reception interference.
Sirius is live, dynamic entertainment, completely focused on
listeners. Every minute of every day of every week will be different.
All 60 commercial-free music channels are created in-house and
hosted by DJs who know and love the music. Do you like Reggae?
How about Classic Rock or New Rock? Sirius has an array of choices
spanning a vast range of musical tastes including the hits of the 50’s,
60’s, 70’s, & 80’s as well as Jazz, Country, Blues, Pop, Rap, R&B,
Bluegrass, Alternative, Classical, Heavy Metal, Dance and many
others…
From its state-of-the-art, digital broadcasting facility in Rockefeller
Center, New York City, Sirius will deliver the broadest, deepest mix
of radio entertainment from coast to coast.
Sirius will bring you music and entertainment programming that is
simply not available on traditional radio in any market across the
country. It’s radio like you’ve never heard before.
So Get Sirius and Listen Up! For more information, visit
<www.sirius.com>.
FCC WARNING
This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
❈ Displays shown in this manual are for descriptive purposes only, and may
differ from actual displays.
— 3 —
Safety precautions
IMPORTANT INFORMATION
2WARNING
NOTE
About CD players/disc changers
• If you experience problems during
installation, consult your Kenwood dealer.
To prevent injury and/or fire, take the
following precautions:
• Insert the unit all the way until it is fully
locked in place. Otherwise it may fly out of
place during collisions and other jolts.
• To prevent short circuits, never put or leave
any metallic objects (e.g., coins or metal
tools) inside the unit.
• If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
connected to this unit:
KENWOOD disc changers/ CD players
released in 1998 or later can be connected to
this unit.
• If the unit does not seem to be working
right, try pressing the reset button on the
control unit first. If that does not solve the
problem, consult your Kenwood dealer.
• When the reset button is pressed, the Sirius
satellite radio becomes ready to receive after
approximately 15 seconds.
Note that any KENWOOD disc changers/ CD
players released in 1997 or earlier and disc
changers made by other makers cannot be
connected to this unit.
Unsupported connection may result in
damage.
Setting the "O-N" Switch to the "N" position for
the applicable KENWOOD disc changers/ CD
players.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain
off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
• Be careful not to drop the unit or subject it to
strong shock.
2CAUTION
Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
To prevent damage to the machine,
take the following precautions:
• Do not open the top or bottom covers of the
unit.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• During installation, do not use any screws
except for the ones provided. The use of
improper screws might result in damage to
the main unit.
• When drilling a hole in the car to fix the
brackets, make sure not to damage the fuel
tank, brake tube, wiring harnesses, etc. on
the other side.
— 4 —
Which is your control unit?
Follow the <INSTRUCTION MANUAL> or the
<INSTRUCTION MANUAL For The SIRIUS
Tuner Control> of the control unit if the
operations of Sirius satellite radio tuner are
explained in it.
B models:
KDC-X917, KDC-X817, KDC-X717,
KDC-X459,
KDC-V7017,
KDC-9017, KDC-716S, KDC-5019, KDC-519,
KDC-4019, KDC-419, KDC-319,
KRC-535, KRC-435
☞Go to <Operations from Model-B or C
Control Unit> (page 9).
C models:
Z828, Z727, Z910DVD
☞Go to <Operations from Model-B or C
Control Unit> (page 9).
D models:
KDC-X859, KDC-X759, KDC-MP919
If not explained in the <INSTRUCTION
MANUAL> of the control unit, the operations
vary among Models A to D of the control unit.
See the <About Sirius Satellite Radio Tuner>
section of the instruction manual and
determine the model name of the control unit.
If this section is omitted in the manual, follow
the instructions given below.
A models:
☞Go to <Operations from Model-D Control
Unit> (page 12).
The control units (having Sirius tuner control
functions) released in 2004 and later,
KDC-X959, KDC-X679, KDC-X659,
KDC-X579, KDC-X569, KDC-X559,
KDC-X469,
KDC-MPV7019, KDC-MPV622,
KDC-MPV619, KDC-MPV6022,
KDC-MPV525, KDC-MPV5025,
KDC-MP819, KDC-MP625, KDC-MP6025,
KDC-MP522, KDC-MP425, KDC-MP225,
KDC-MP222,
KDC-719, KDC-422, KDC-4022, KDC-325,
KDC-322, KDC-3025, KDC-3022,
KDC-225MR, KDC-225, KDC-2025
☞Go to <Operations from Model-A Control
Unit> (page 6).
— 5 —
Operations from Model-A Control Unit
When you have the model-A control unit categorized by the
<Which is your control unit?> (page 5), follow the operation
instructions given below.
Selecting the Preset Band
Press the [FM] button.
Each time the button is pressed the preset band switches
between the SR1, SR2, SR3 and SR4.
Sirius ID [ESN] display
You must have the Sirius ID number [ESN] for licensing with
Sirius Corp. Check the Sirius ID [ESN] of this unit as follows.
Tuning
1 Select the Sirius Satellite Radio Mode
Press the [SRC] button.
Select the "SIRIUS" display.
Selecting the channel.
Press the [4] or [¢] button.
2 Check the Sirius ID [ESN] of this unit
See the <Menu System> page of the instruction manual of
your control unit, and select the ESN menu item.
The Sirius ID [ESN] will be displayed.
Channel Preset Memory
Putting the channel in the memory.
Serial & Sirius ID [ESN]
It is especially important to retain the unit serial number and the
electronic Sirius Identification number for service activation and
potential future service changes.
1 Select the preset band
Press the [FM] button.
2 Select the channel to put in the memory
Press the [4] or [¢] button.
3 Put the channel in the memory
Select Sirius Satellite Radio Mode
Listening to the satellite radio.
Press the [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the memory on each [1]
— [6] button.
Press the [SRC] button.
Select the "SIRIUS" display.
• Only the channel number is stored. Category information is not
stored.
• This function can be used only when the "Channel"/"CHANNEL"
has been selected in <Switching Seek Mode> (page 7).
• You need to subscribe to SIRIUS to receive the service by Sirius
Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO
SUBSCRIBE"/"CALL 888 539-SIRI" appears.
• It may take a little time to start receiving after you selected the
SIRIUS source.
• If the signal receiving fails, "Acquiring Signal"/"ACQUIRING
SIGNAL" appears.
— 6 —
Preset Tuning
Category and Channel Search
Calling up the channels in the memory.
Select the category and channel you wish to listen to.
<KDC-MP225, KDC-225MR, KDC-225, KDC-2025,
KDC-MP222>
1 Select the preset band
Press the [FM] button.
1 Enter category and channel search mode
Press the [FM] button for at least 1 second.
2 Call up the channel
Press the [1] — [6] button.
2 Select the category
Press the [FM] or [AM] button.
3 Select the channel
Press the [4] or [¢] button.
Channel Scan
Canceling category and channel search mode
Press the [FM] button for at least 1 second.
Every receivable Channel is checked for 10 seconds.
1 Start Channel Scan
Entering and canceling the category and channel search mode
with remote
Press the [38] button on the remote.
Press the [AUTO] button for at least 2 seconds.
The channel scan will start.
2 Release it when the channel you want to listen to is received
<Others>
Press the [AUTO] button for at least 2 seconds.
1 Enter category and channel search mode
Press the [38] button.
2 Select the category
Press the [FM] or [AM] button.
Switching Seek Mode
Sets the seeking mode.
3 Select the channel
Press the [4] or [¢] button.
Press the [AUTO] button.
Each time the button is pressed the Seek mode switches as
shown below.
Canceling category and channel search mode
Press the [38] button.
You cannot operate this unit until all the Category information is
acquired.
Display
Operation
"Channel"/"CHANNEL" Normal manual seeking control.
"Preset"/"PRESET"
Search in order of the channels in the
Preset memory.
This function cannot be used in the category and channel search
mode.
— 7 —
Operations from Model-A Control Unit
Information (Lower Part Display)
Switching Display
When you are listening to the Sirius satellite radio, you can
switch over the display information as follows.
Channel Name
Song Title
Artist Name
Composer name
Category Name
Label Name
Comment
For operations, see the <Switching Display> page of the
instruction manual of your control unit.
What is displayed may partly depend on control units to be
connected.
<The control units released in 2004 and later, KDC-X579,
KDC-MPV525, KDC-MPV5025, KDC-MP425, KDC-MP225,
KDC-225MR, KDC-225, KDC-2025, KDC-X569, KDC-X469,
KDC-MP522, KDC-MPV622, KDC-MPV6022, KDC-4022,
KDC-422, KDC-MP222>
You cannot apply the same setting to Upper Part and Lower Part.
<KDC-X959, KDC-X659, KDC-MP819, KDC-719, KDC-X559>
Information (Upper Part Display)
Information
Band & Channel Number (KDC-X659/MP819/719/X559 only)
Channel Name
Song Title
Channel Name
Song Title
Artist Name
Artist Name
Composer name
Category Name
Band & Channel Number
Category Name
Label (KDC-X959 only)
Comment (KDC-X959 only)
If the text, including Channel name, etc. is selected when the
channel which does not have text, including Channel name, etc. is
played, band & channel number is displayed.
Information (Lower Part Display)
Artist Name
Song Title
<KDC-X679, KDC-MP6025, KDC-MP625>
Channel Name
Information (Upper Part Display)
Comment (KDC-X959 only)
Label (KDC-X959 only)
Channel Name
Song Title
Artist Name
You cannot apply the same setting to Upper Part and Lower Part.
Composer name
Category Name
Label Name
Comment
Band & Channel Number
— 8 —
Operations from Model-B or C Control Unit
<KDC-3025, KDC-325, KDC-3022, KDC-322,
KDC-MPV619, KDC-MPV7019>
When you have the model-B or C control unit categorized by
the <Which is your control unit?> (page 5), follow the operation
instructions given below.
Information
Band & Channel Number (KDC-MPV619/MPV7019 only)
Channel Name
Song Title
Artist Name
Sirius ID [ESN] display
You must have the Sirius ID number [ESN] for licensing with
Sirius Corp. Check the Sirius ID [ESN] of this unit as follows.
Category Name
Band & Channel Number (KDC-3025/325/3022/322 only)
<B models>
If the text, including Channel name, etc. is selected when the
channel which does not have text, including Channel name, etc. is
played, band & channel number is displayed.
1 Select the Sirius Satellite Radio Mode
Press the [SRC] button.
Select the "SIRIUS" display.
2 Check the Sirius ID [ESN] of this unit
Press the [DISP] button repeatedly until ESN mode is
displayed.
Direct Access Tuning
Entering the channel and tuning.
(Function of remote)
<C models>
1 Enter Direct Access Tuning mode
1 Select the Sirius Satellite Radio Mode
Press the [SRC] button.
Press the [DIRECT] button on the remote.
Select the "SIRIUS" display.
2 Enter the channel
Press the number buttons.
2 Change the switching display mode to "Display Type A" or
"Display Type B".
For display mode selection, see the <Switching Display
Mode> section of the instruction manual.
3 Do Channel Search
Press the [4] or [¢] button.
Canceling Direct Access Tuning
3 Press the [S.A] button to enter the display control mode.
Press the [DIRECT] button on the remote.
• If you make no button operation for 10 seconds, the Direct Access
Tuning mode is automatically canceled.
• You can set up to Channel number 223.
• You cannot search for a channel number which is not
broadcasting.
4 Check the Sirius ID [ESN] of this unit
Press the [4] or [¢] button to select the "ESN" display.
5 Press the [S.A] button.
Serial & Sirius ID [ESN]
It is especially important to retain the unit serial number and the
electronic Sirius Identification number for service activation and
potential future service changes.
• If you cannot receive any signal in the input Channel due to a bad
condition on radio wave or another problem, "Acquiring Signal"/
"ACQUIRING SIGNAL" appears.
— 9 —
Operations from Model-B or C Control Unit
• If there is no receivable Channel in Category, the Category
switches to the next.
• You cannot operate this unit until all the Category information is
Select Sirius Satellite Radio Mode
Listening to the satellite radio.
acquired.
Press the [SRC] button.
• Select category to switch to the first channel that contains that
category.
Select the "SIRIUS" display.
• You need to subscribe to SIRIUS to receive the service by Sirius
Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO
SUBSCRIBE"/ "CALL 888 539-SIRI" appears.
• It may take a little time to start receiving after you selected the
SIRIUS source.
• When you are using the control unit having the Sirius/Dab setting
in the menu system, select "SIRIUS"/"SIRI" in this menu.
Channel Preset Memory
Putting the channel in the memory.
1 Select the preset band
Press the [FM] button.
2 Select the channel to put in the memory
Selecting the Preset Band
Press the [FM] button.
Each time the button is pressed the preset band switches
between the SR1/Si1,SR2/Si2 and SR3/Si3.
Press the [4] or [¢] button.
3 Put the channel in the memory
Press the [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the memory on each [1]
— [6] button.
Only the channel number is stored. Category information is not
stored.
Tuning
Selecting the channel.
Press the [4] or [¢] button.
Preset Tuning
Calling up the channels in the memory.
1 Select the preset band
Category Select
The Category that includes the channel received switches to the
next.
Press the [FM] button.
2 Call up the channel
Press the [1] — [6] button.
Press the [AM] button.
— 10 —
Information (Lower Part Display)
Switching Seek Mode
Sets the seeking mode.
Channel Number & Channel Name
Song Title & Artist Name
See the <Menu System> page of the Instruction Manual of
your control unit, and select the seek mode menu item.
The seek mode is switched each time the [4] or [¢]
button is pressed.
You cannot apply the same setting to Upper Part and Lower Part.
<KDC-V7017, KDC-716S, KRC-535, KRC-435, KDC-519,
KDC-X459, KDC-419, KDC-5019, KDC-4019, KDC-319>
Display
Operation
"AUTO1"
Search in order of the channels in the Preset
memory.
Normal manual seeking control.
Information
Channel Number & Channel Name /
Channel Name
"MANUAL"
Song Title & Artist Name
Category Name
ESN
Channel Number
Switching Display
When you are listening to the Sirius satellite radio, you can
switch over the display information as follows.
For operations, see the <Switching Display> page of the
instruction manual of your control unit.
What is displayed may partly depend on control units to be
connected.
<C models, KDC-X917, KDC-X817, KDC-9017, KDC-X717>
Information (Upper Part Display)
Channel Number & Channel Name
Song Title & Artist Name
Category Name
ESN
Channel Number
— 11 —
Operations from Model-D Control Unit
When you have the model-D control unit categorized by the
<Which is your control unit?> (page 5), follow the operation
instructions given below.
Selecting the Preset Band
Press the [FM] button.
Each time the button is pressed the preset band switches
between the SR1, SR2, SR3 and SR4.
Sirius ID [ESN] display
You must have the Sirius ID number [ESN] for licensing with
Sirius Corp. Check the Sirius ID [ESN] of this unit as follows.
Tuning
Selecting the channel.
Press the [4] or [¢] button.
1 Select the Sirius Satellite Radio Mode
Press the [SRC] button.
Select the "SIRIUS" display.
2 Check the Sirius ID [ESN] of this unit
See the <Menu System> page of the instruction manual of
your control unit, and select the ESN menu item.
The Sirius ID [ESN] will be displayed.
Preset Tuning
Calling up the channels in the memory.
Serial & Sirius ID [ESN]
It is especially important to retain the unit serial number and the
electronic Sirius Identification number for service activation and
potential future service changes.
1 Select the preset band
Press the [FM] button.
2 Call up the channel
Press the [1] — [4] button.
The channels are called up as shown below.
Press button
Call up number
Select Sirius Satellite Radio Mode
Listening to the satellite radio.
j
j
[1/5]
[2/6]
[3]
No.1
No.2
No.3
No.4
No.5
No.6
Press the [SRC] button.
Select the "SIRIUS" display.
[4]
• You need to subscribe to SIRIUS to receive the service by Sirius
Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO
SUBSCRIBE" appears.
Each time the button is pressed, the called up channel switches
cyclically.
• It may take a little time to start receiving after you selected the
SIRIUS source.
• If the signal receiving fails, "Acquiring Signal" appears.
— 12 —
Channel Preset Memory
Channel Scan
Putting the channel in the memory.
Every receivable Channel is checked for 10 seconds.
1 Select a scan item from the menu item list.
1 Select the preset band
Press the [FM] button.
2 Start Channel Scan
Press the [4] or [¢] button for at least 1 second.
The channel scan will start.
2 Enter Memory mode
Press the [P.M] button for at least 1 second.
"Preset Memory" is displayed.
3 Release it when the channel you want to listen to is received
Press the [4] or [¢] button for at least 1 second, or press
the [MENU] button to release the menu mode.
3 Select the channel to put in the memory
Press the [4] or [¢] button.
4 Select the preset number
Press the [FM] or [AM] button.
5 Put the channel in the memory
Press the [P.M] button for at least 2 seconds.
The preset number display blinks 1 time.
Switching Seek Mode
6 Repeating steps 3 to 5 and putting the desired channel in the
Sets the seeking mode.
memory.
Press the [AUTO] button.
Each time the button is pressed the Seek mode switches as
shown below.
On each band, 1 channel can be put in the memory on each [1]
— [6].
7 Exit Memory mode
Display
Operation
Press the [P.M] button.
"Channel"
"Preset"
Normal manual seeking control.
Search in order of the channels in the Preset
memory.
• Only the channel number is stored. Category information is not
stored.
• You can set up to 6 memories even on a control unit with 8 preset
buttons.
This function cannot be used in the category and channel search
mode.
— 13 —
Operations from Model-D Control Unit
Information (Lower Part Display)
Category and Channel Search
Select the category and channel you wish to listen to.
Artist Name
Song Title
Channel Name
1 Enter category and channel search mode
Press the [2/6] button for at least 1 second.
You cannot apply the same setting to Upper Part and Lower Part.
2 Select the category
Press the [FM] or [AM] button.
3 Select the channel
Press the [4] or [¢] button.
Canceling category and channel search mode
Press the [2/6] button.
Direct Access Tuning
Entering the channel and tuning.
(Function of remote)
• You cannot operate this unit until all the Category information is
acquired.
• Entering and canceling the category and channel search mode
with remote
1 Enter Direct Access Tuning mode
Press the [38] button on the remote.
Press the [DIRECT] button on the remote.
2 Enter the channel
Press the number buttons.
3 Do Channel Search
Press the [4] or [¢] button.
Canceling Direct Access Tuning
Switching Display
When you are listening to the Sirius satellite radio, you can
switch over the display information as follows.
Press the [DIRECT] button on the remote.
• If you make no button operation for 10 seconds, the Direct Access
Tuning mode is automatically canceled.
• You can set up to Channel number 223.
• You cannot search for a channel number which is not
broadcasting.
For operations, see the <Switching Display> page of the
instruction manual of your control unit.
What is displayed may partly depend on control units to be
connected.
• If you cannot receive any signal in the input Channel due to a bad
condition on radio wave or another problem, "Acquiring Signal"
appears.
Information (Upper Part Display)
Band & Channel Number
Channel Name
Song Title
Artist Name
Category Name
— 14 —
Accessories
Installation Procedure
1. To prevent short circuits, remove the key from the ignition and
disconnect the - terminal of the battery.
2. Install the Sirius antenna and connect the antenna wire to the
Sirius satellite radio tuner.
3. Connect the Sirius satellite radio tuner and the control unit using
the provided Sirius connection wire.
4. Make the proper input and output wire connections for each unit.
5. Install the unit in your car.
1
4
5
2
3
6. Reconnect the - terminal of the battery.
7. Press the reset button on the control unit.
2CAUTION
2CAUTION
• Do not connect the Sirius control wire while the control unit is turned ON.
• Be sure to press the reset button on the control unit after installation.
• If your car is not prepared for this special connection-system, consult your
Kenwood dealer.
• Make sure that all wire connections are securely made by inserting jacks
until they lock completely.
The use of any accessories except for those provided might result in damage
to the unit. Make sure only to use the accessories shipped with the unit, as
shown above.
• Do not let unconnected wires or terminals touch metal on the car or
anything else conducting electricity. To prevent short circuits, also do not
remove the caps on the ends of the unconnected wires or the terminals.
• Insulate unconnected wires with vinyl tape or other similar material.
• Take care so that the antenna wire and other connection wires are not
caught by mobile parts. Otherwise wire disconnection or other trouble may
result.
• Do not apply too much force on the antenna wire, other connection wires
and connectors by bending a wire, etc. Otherwise wire disconnection or
other trouble may result.
• After the unit is installed, check whether the brake lamps, indicators, wipers,
etc. on the car are working properly.
— 15 —
Connecting Wires to Terminals
■ If you want to connect the Control unit
To KENWOOD disc changer/
Sirius control input
Control unit
Sirius antenna
(Separated-sale product)
Sirius Satellite
Radio tuner
Sirius connection wire
(Accessory1)
To control unit
(Front side)
(Rear side)
When the control unit is connected, you
cannot use this "TO CONTROLLER" input
terminal.
KENWOOD disc changer control input
To connect the Disc changer, consult your
Disc changer manual.
Disc changer
When you use Controller unit (optional accessory), refer to <If you
want to connect the Controller> of the next page and connect
Controller unit.
— 16 —
■ If you want to connect the Controller
Car Audio unit
Audio input
Audio output
(Left: White, Right: Red)
Sirius Satellite
Radio tuner
Controller unit (optional accessory) input
Power cable input
(optional accessory)
Sirius antenna
(Separated-sale product)
(Front side)
(Rear side)
When the controller unit is connected,
you cannot use this "TO SLAVE UNIT"
input terminal.
■ If you want to connect KCA-S210A
Control unit
]“N”
Sirius Satellite Radio tuner
TO
HEAD UNIT
Connect the KTC-SR903 to the terminal
labelled TO CHANGER 2.
Set the PROTOCOL selection
O
N
OFF ON
AUX
PROTOCOL
SWITCH
AUX
IN
SWITCH
TO
H/U
TO
CHANGER 1
TO
CHANGER 2
switch to "N" position.
KCA-S210A
Please keep the total extension of
the control cable from the control
unit to the disc changer to 13 m or
less. Control cable lengths in
excess of 13 m will cease to
function properly.
Disc changer
— 17 —
Mounting the Sirius Satellite radio tuner Unit
■ Installation using the self-tapping screws
2CAUTION
• Install the Sirius satellite radio tuner unit in a well-ventilated location and do
not place objects on top of it.
Accessory4 (Ø5 × 20 mm)
Accessory2
• When installing to the car, the unit should be securely fastened at a location
that will not interfere with driving.
• When making a hole in the chassis, check that the gas tank, break pipe, wire
harness, or other part is not located on the other side, and be careful not to
cause scratches.
Accessory3
(M4 × 8 mm)
• When attaching the mounting fittings (Accessory2) to the Sirius satellite
radio tuner unit, use only the supplied mounting screws (Accessory3) (M4 x
8 mm). Use of screws other than those supplied may result in internal
damage or insecure mounting and is very dangerous.
Carpet
Board etc.
thickness: 20 mm or more
■ Installation using the velcro tapes
Accessory5
Carpet
2CAUTION
Please do not install the unit near the dashboard, the rear tray, or other
important components. Doing so could lead to injury or accident should the
unit come off due to a shock and strike a person or an important component.
Tapping screws should be used for mounting. (Attachment with velcro strips,
although easy, can come off with a shock.)
— 18 —
Troubleshooting Guide
If you use this for the first time, it may be difficult to
receive signals in the beginning. In such a case, leave
the SIRIUS source ON for 3 minutes and turn it OFF
and ON.
? No broadcast can be received.
✔
The Sirius antenna is not connected.
☞ Connect it properly by referring to <Connecting Wires to
Terminals>.
✔
No subscription is established.
☞ Subscribe to SIRIUS.
What might appear to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
The following messages are displayed when certain
problems are occurring in your system. Take the
recommended actions.
? The Sirius mode cannot be selected.
✔
✔
✔
The Sirius connection wire is not connected.
☞ Use the Sirius connection wire to connect the control unit and the
Sirius satellite radio tuner.
ANTENNA ERROR / ANT ERR / ANT ERROR:
Antenna is not connected correctly.
➪ Make sure the antenna is connected correctly and then
turn OFF/ON of the SIRIUS source or Control unit.
The PROTOCOL selection switch of the changer switching unit "KCA-
S210A" is not set properly.
☞ Set the PROTOCOL selection switch to "N" position.
TUNER ERROR / TUNE ERR :
The changer switching unit "KCA-S210A" is not connected properly.
☞ Connect the KTC-SR903 to the terminal labelled TO CHANGER 2.
See the section on <Connecting Wires to Terminals>.
Broadcast cannot be received due to an error in this unit.
➪ Turn OFF/ON of the SIRIUS source or Control unit, or
press the reset button of Control unit.
? Nothing happens when the buttons are pressed.
ESN ERROR / ESN ERR :
✔
The computer chip in the unit is not functioning normally.
ESN (Electronic Serial Number) is not registered in this unit.
➪ Consult your nearest service center.
☞ Press the reset button on the Control/Controller unit .
? No sound can be heard, or the volume is low.
✔
The input/output wires or wiring harness are connected incorrectly.
☞ Reconnect the input/output wires and/or the wiring harness
correctly. See the section on <Connecting Wires to Terminals>.
— 19 —
Specifications
Specifications subject to change without notice.
Sirius tuner section
Frequency range (Overall) .....................2320 MHz – 2332.5 MHz
Frequency range (TDM Channel#1(fc)) ..................2322.293 MHz
Frequency range (COFDM Channel(fc)) ...................2326.25 MHz
Frequency range (TDM Channel#2(fc)) ..................2330.207 MHz
Usable sensitivity (TDM Channel) ............... - 83 dBm – - 55 dBm
Usable sensitivity (COFDM Channel)........... - 80 dBm – + 4 dBm
General
Audio Sampling...................................................................48kHz
Operating voltage .............................14.4 V (11 – 16 V allowable)
Current consumption........................................................500 mA
Operating Environment .......................................-20 °C – +70 °C
Installation size (W × H × D) .................188.0 × 29.0 × 145.0 mm
7-3/8 × 1-1/8 × 5-11/16 in.
Weight: ..............................................................1.543 lbs (700 g)
— 20 —
|