Montageanleitung und Handhabungshinweise
Parallelwippe
Art.-Nr. 08311-400
D
GB
F
NL
E
I
PL
GB
Assembly Instructions
Read these instructions carefully before assembling the product or using it for
the first time. They contain important information for your safety and for the
correct use and maintenance of this KETTLER product. Keep the instructions in
a safe place for information or for ordering spare parts.
4
GB
Assembly Instructions
How to handle
■ Make sure that usage does not commence until the apparatus has been properly assem-
bled and subsequently controlled by an adult.
■ Instruct children on the proper handling of the apparatus and advise them of possible dangers.
■ Remember that the children's natural play instinct and temper may lead to unforeseeable
situations excluding a responsibility of the manufacturers.
■ Although dangers to children during proper use of the apparatus are highly unlikely, all
play on the apparatus should be monitored by an adult.
■ For cleaning and caring the swing only use environmentally friendly and no aggressive or
corroding agents.
■ Regularly grease the moving parts with some drops of oil.
Instructions for Assembly
■ Ensure that you have received all the parts required (see check list) and that they are un-
damaged. Should you have any cause for complaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully and carry out the opera-
tions in the order shown by the diagrams. The correct sequence is given in capital letters.
■ The fastening material required for each assembly step is shown in the diagram inset. Use the
fastening material exactly as instructed. The required tools are supplied with the equipment.
■ The equipment must be assembled with due care by an adult person. If in doubt call upon
the help of a second person, if possible technically talented.
■ Please note that there is always a danger of injury when working with tools or doing man-
ual work. Therefore please be careful when assembling this machine.
■ Ensure that your working area is free of possible sources of danger, for example don’t leave
any tools lying around. Always dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if children play with plastic bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tight-
en nuts completely against resistance (locking device). Then check that all screw connec-
tions have been tightened firmly. Attention: once locknuts have been unscrewed they no
longer function correctly (the locking device is destroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
■ Waste Disposal: KETTLER products are recyclable. At the end of its useful life please dis-
pose of this article correctly and safely (local refuse sites).
List of spare parts
When ordering spare parts, always state the full article number, spare-partnumber, the quan-
tity required and the S/N of the product (see spare parts drawing).
Example order: Art. no. 08311-400 / spare-part no. 10100016 / 2 pieces / S/N......
6
GB
Assembly Instructions
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts,
washers etc.) is required, this should be clearly stated on the order by adding the words „with
fastening material“.
Please keep original packaging of this article, so that it may be used for transport at a later date,
if necessary. Goods may only be returned after prior arrangement and in (internal) packaging,
which is safe for transportation, in the original box if possible. It is important to provide a detai-
led defect description / damage report!
GB
KETTLER GB Ltd.
KETTLER House, Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL
USA
KETTLER International Inc.
1355 London Bridge Road · Virginia Beach, VA 23453
Checkliste (Packungsinhalt)
GB Checklist (contents of packaging)
E
I
Lista de control (contenido del paquete)
Lista di controllo (contenuto del pacco)
F
Liste de vérification (contenu de
l’emballage)
PL Lista kontrolna (zawartość opakowania)
NL
Checklijst (verpakkingsinhoud)
1x
1x
2x
2x
2x
2x
3x
1x
2x
2x
1x
1x
21
2x
4x
2x
1x
2x
6x
6x
8x
4x
4x
6x
4x
✓
M8x55
ø10x90
M8x50
M6x16
ø10x55
M8x110
4x
4x
9x
M5x52
M8x75
Messhilfe für Verschraubungsmaterial
GB
F
E
I
Measuring help for screw connections
Gabarit pour système de serrage
Meethulp voor schroefmateriaal
Ayuda para la medición de los tornillos
Misure per i materiali di avvitamento
Wzornik do połączeń śrubowych
NL
PL
22
1
A
C
E
4x
2x
D
B
B
D
F
ø10x55
F
E
M8x110
4x
2x
A
ø10x90
M8x75
2
3
C
A
B
B
A
4x
6x
M5x52
M6x16
23
4
A
C
B
A1x
C1x
M8x50
M8x55
5
1x
M8x50
24
6
*
30cm
Beton
*
concrete
béton
ø20cm
beton
54cm
*
*
*
ø8mm
Gehört nicht zum Lieferumfang.
Not included.
*
Ne fait pas partie du domaine de livraison.
Is niet in de levering ingesloten.
No forma parte del volumen de entrega.
Non in dotazione alla fornitura.
Nie należy do zakresu dostawy.
25
Handhabungshinweise
GB
E
I
Handling
Instrucciones de manejo
Avvertenze per il maneggio
Wskazówki obsługowe
F
Indications relatives à la manipulation
Bedieningsinstrukties
NL
PL
M8x55
bis 6 Jahre
until age of 6
moins de 6 ans
onder 6 jaar
de hasta 6 años
max. 6 anni
do 6 lat
6 Jahre – 50 kg (ca. 14 Jahre)
6 years – 50 kg (ca. 14 years)
6 ans – 50 kg (ca. 14 ans)
6 jaar – 50 kg (ca. 14 jaar)
6 años – 50 kg (ca. 14 años)
6 anni – 50 kg (ca. 14 anni)
6 lat – 50 kg (ca. 14 lat)
26
Sicherheitsbereich
GB
E
I
Safety Zone
Zona de seguridad
Sattore di sicurezza
Strefa bezpieczna
F
Zone de sécurité
Veiligheidszon
NL
PL
2m
Ersatzteilzeichnung und –liste
Spare parts drawing and list
Designación y lista de las piezas de
recambio
GB
F
E
Dessin et liste des pièces de rechange
Reserveonderdeeltekening en -lijst
Disegno ed elenco dei pezzi di ricambio
I
NL
Rysunek i lista części zamiennych
PL
Teil Bezeichnung
Nr.
Stück
Ersatzteil-Nr.
für 08311-400
1a Parallelrohr (kpl. mit Radnabenb. ø10,5mm und Distanzrohren) rot/weiß 1
94210632
94210629
10116013
97201444
94211187
10100006
94312052
1b Parallelrohr (kpl. mit Radnabenbuchsen ø10,5mm und Distanzrohren) rot
1
12
2
2
3
4
5
6
Radnabenbuchse ø10,5mm
Distanzrohr ø10x0,9x90mm
Griffbügel
2
Stopfen für ø18mm
Fuß
4
3
27
7
5
4
2
3
8
9
11
10
15
1
14
13
12
6
Typenschild – Seriennummer
HEINZ KETTLER GmbH & Co. KG
D-59469 Ense-Parsit
Type label – Serial number
Art.-Nr. 08718-000
Serien-Nr.: 1-334 O - 1801 0001
geprüft nach DIN EN 71-1, -2, -3
Plaque signalétique – Numèro de serie
Typeplaatje – Seriennummer
Placa identificativa – Número de serie
Targhetta tecnica – Numero di serie
Tabliczka identyfikacyjna – Numer serii
Made in Germany
Teil Bezeichnung
Nr.
Stück
Ersatzteil-Nr.
für 08311-400
7
8
9
Blassitz
2
2
2
2
1
1
2
1
4
1
70120239
94210644
25536142
70130245
94211179
94210641
70130250
70130255
97200548
94280177
Sitzträger (kpl. mit Druckfeder, Federfuß und Bef.-Mat.)
Druckfeder
10 Federfuß
11 Gabelbock
12 Fußflansch
13 Lagerbuchse
14 Gleitring
15 Distanzrohr ø10x0,9x55mm
16 Schraubenbeutel
|