AcousticsLimitedWarranty
Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of
THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER
Dealer it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you must have the
original receipt. Should service be necessary under this warranty for any reason due to manufacturing defect or
malfunction during the warranty period, Kicker will repair or replace (at its discretion) the defective merchandise with
equivalent merchandise at no charge. Warranty replacements may have cosmetic scratches and blemishes.
Discontinued products may be replaced with more current equivalent products.
This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the
original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as
provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or
implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties; therefore
these exclusions may not apply to you. This warranty gives you specific legal rights; however you may have other
rights that vary from state to state.
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE
Defective merchandise should be returned to your local Authorized Stillwater Designs (Kicker) Dealer for warranty
Designs directly. You can confirm that a dealer is authorized by asking to see a current authorized dealer window
decal.
X
If it becomes necessary for you to return defective merchandise directly to Stillwater Designs (Kicker), call the Kicker
Customer Service Department at (405) 624-8510 for a Return Merchandise Authorization (RMA) number. Package
only the defective items in a package that will prevent shipping damage, and return to:
Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075
The RMA number must be clearly marked on the outside of the package. Please return only defective components
(most likely the SPAIR). The return of functioning items increases your return freight charges. Non-defective items
will be returned freight-collect to you. For example, if a subwoofer is defective, only return the defective subwoofer,
not the entire enclosure.
Include a copy of the original receipt with the purchase date clearly visible, and a "proof-of-purchase" statement
listing the Customer's name, Dealer's name and invoice number, and product purchased. Warranty expiration on
items without proof-of-purchase will be determined from the type of sale and manufacturing date code. Freight must
be prepaid; items sent freight-collect, or COD, will be refused.
SOLOXSUBWOOFER
WHAT IS NOT COVERED?
This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover:
o Burnt voice coils
o Damage due to improper installation
o Subsequent damage to other components
S12X, S10X
o Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation
o Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be
considered abuse
o Any cost or expense related to the removal or reinstallation of product
o Speakers damaged due to amplifier clipping or distortion
o Items previously repaired or modified by any unauthorized repair facility
o Return shipping on non-defective items
o Products with tampered or missing barcode labels
o Products returned without a Return Merchandise Authorization (RMA) number
o Freight Damage
o The cost of shipping product to Kicker
o Service performed by anyone other than Kicker
HOW LONG WILL IT TAKE?
Kicker strives to maintain a goal of 24-hour service for all acoustics (subwoofers, midrange drivers, tweeters,
crossovers, etc) returns. Delays may be incurred if lack of replacement inventory or parts is encountered.
Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker Customer Service
Department at (405) 624-8510. Contact your International Kicker dealer or distributor concerning specific
proceduresforyourcountry'swarranty policies.
© 2007 Stillwater Designs
If you prefer an ultra-smooth bass response, you should loosely fill your SoloX enclosure with
poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill
cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil
will slightly decrease efficiency, but will deepen and extend the low frequency output.
VentedEnclosureApplications
The SoloX was designed for a vented enclosure. Throw out every experience you have ever had with a
vented speaker and prepare to be blown away! Our engineers have designed boxes that will intimidate
and irritate everyone within a 3 mile radius. These enclosures incorporate massive slot-loaded
(rectangular) ports with ultra low air velocity for ground pounding street bass that will make your “skin
bounce on your bones!”
For more advice on box building, refer to your Authorized Kicker Dealer, or click on the Support tab on
(405) 624-8583 for specific or unanswered questions.
These boxes are the enclosure of choice for outrageous street bass and high performance SPL
contests. If space is not a problem and you want to get the most from your SoloX, try one of these
ported designs. You will not be disappointed.
Figure 5
RemovalMountingAssembly
The ported Compact design increases bass efficiency and fits in many space-limited applications.
Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be
considerably higher than that of any sealed box. The SUV design is the one to do if you have the room.
Please follow these instruction to insure proper installation.
With assistance, remove the SoloX from
SoloX
the cardboard box. See Figure 5.
The SPL is the largest and most efficient enclosure design. The SPL delivers the sonic output needed to
win SPL contests and it produces bass notes in a “Livin’ Loud” manner. This design is intended for test
tones above 68Hz; playing music with frequencies below 68Hz will result in subwoofer damage.
Acorn
Head
Bolts
Then remove the eight (8) Acorn Head
Box
Bolts securing the SPAIR (Simple Pull
Apart Insertable Replacement cone
assembly) to the BAM (Basket And Motor
assembly) and to the wood “template”.
Model:
S10X
VentedCompact (MinimumEnclosureVolume)
VentedSPL (MaximumEnclosureVolume)
3
3
2.25 ft (63.7L) + port displacement, Fb=44Hz
6 ft (170L) + port displacement, Fb=68Hz
2
2
2
2
Port: 42 in (271cm ) area x 19.75” (50.2cm) long
Port: 250 in (1613cm ) area x 9” (22.9cm) long
Place the SPAIR in a safe and clean location. See Figure 6.
Power Handling = 1400W Peak
Power Handling = 2500W Peak above 68Hz
Install
Gap Cap
3
3
S12X
3 ft (85.0L) + port displacement, Fb=40Hz
6 ft (170L) + port displacement, Fb=68Hz
Figure 6
2
2
2
2
Port: 45 in (290cm ) area x 18.75” (47.6cm) long
Port: 250 in (1613cm ) area x 9” (22.9cm) long
SPAIR
Power Handling = 1400W Peak
Power Handling = 2500W Peak above 68Hz
Install the Gap Cap around the BAM’s pole-piece to protect the
motor assembly from debris during the installation. Metal
shavings would be nearly impossible to remove from the gap.
Please protect your purchase, use the Gap Cap. See Figure 7.
BAM
Model:
S10X
VentedSUV (TheOneToDo)
3
4.91 ft (139L) + port displacement, Fb=45Hz
Pro Tip: You are one ZX Mono-Amplifier
and a few cables away from a slamm’in
system! The Kicker ZX line of mono-
amplifiers make it easy to upgrade to
rock-solid bass.
2
2
Port: 60 in (387cm ) area x 8.75” (22.2cm) long
Remove
Locator Hole
Machine
Screws
10-24
Power Handling = 1500W Peak
(on the Back
Side of the
SPAIR)
3
Locator Pin
S12X
6 ft (170L) + port displacement, Fb=45Hz
Figure 7
2
2
Please ask your dealer about the Kicker
ZX Amplifier upgrades.
Port: 60 in (387cm ) area x 6” (15.2cm) long
With the Gap Cap installed, remove the four (4) 10-24 Phillips Head
Machine Screws that lock the BAM to the wood “template”.
See Figure 8.
Power Handling = 2000W Peak
BoxBuildingNotes
Wood Template
Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the
wood “template” inside your SoloX’s shipping carton to mark the mounting hole, then cut directly on the
line. These designs need internal bracing. Add 4 x 4” (10x10cm) triangular bracing between each of the
larger unsupported panels.
BAM
SPLAT
SPLAT
Figure 8
The SPLAT (Speaker Precise Location
Alignment Tool) and wood “template” will
now come free from the BAM.
See Figure 9.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the
vented enclosures the displacement of the port must be calculated and added to the internal volume of
the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for
example the SoloX12 vented compact design’s external port dimensions (45 in2 port area could be a
15 x 3” port by 18.75” long) are, using 3/4” (1.9cm) MDF:
[15” x (3” + 1.5” total MDF thickness) x 18.75”] x (1 ft3 / 1728 in3 ) = .732 ft3, and add this number to
the internal volume of the enclosure, SoloX12’s 3 ft3 + .732 ft3 = 3.732 ft3. See Figure 4. Due to the
necessary length of these ports, you may want to fold the port along the bottom and back walls. It will
be impractical to use round ports for these designs.
Wood Template
Place the wood “template” on the enclosure
baffle and mark the holes for mounting
hardware and for the woofer cutout.
See Figure 10.
Figure 9
Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,
seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest
dimension of the rectangular port as the minimum amount of space between the port opening and any
solid surface to insure unrestricted airflow.
Figure 10
Enclosure Baffle
SoloX Subwoofer and SPAIR - Covered by one or more of the following patents: U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386,
D449,293, D355,193; Taiwan Pat. #162,154; Other U.S. and foreign patents pending.
SOLOXSUBWOOFER
4
5
Wood Template
Figure 19
RemovalMountingAssembly (Continued)
Please follow these instruction to insure proper installation.
Fit the SPAIR to the BAM with the
10-24 Acorn Head Bolts. We have
enclosed four (4) extra Acorn Head
Bolts. See Figure 18.
Use a jigsaw or router to cut the woofer cutout. Use a 5/16 or
11/32” (8 - 8.8mm) drill bit for the mounting holes. See Figure 11.
Note: The following steps require the assistance of
another person.
Hand tighten the 10-24 Acorn Head
Bolts in the order shown in Figure 19.
Then use a wrench or socket driver to
securely fasten the bolts. This will
ensure a proper fit and alignment.
Figure 11
Figure 12
Enclosure Baffle
SPLAT
Figure 18
Insert the SPLAT into the cutout (inside the enclosure) and move it into
position. See Figure 12.
A Note on PowerHandlingCapacity SoloX subwoofers will handle massive amounts of power in any of the
recommended enclosures, minimum or maximum. The smaller enclosures are best for use in limited-space
applications. The larger recommended enclosures will yield more bass at the resonate frequency of the enclosure.
The listed Power Handling capacities assume that both voice coils are in use with the appropriate sub-sonic/resonate
frequency filter. Always connect both coils in a dual voice-coil speaker.
Enclosure Baffle
Use masking tape to temporarily
hold the SPLAT in place inside
the enclosure. This will be
necessary for securing the BAM.
SPLAT
Masking
Tape
Inside the
Enclosure
This tape can be removed after
Enclosure
Baffle
Inside the
Enclosure
the corner fastening
InternationalWarranty
Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty
policies.
hardware has been installed.
See Figure 13.
Figure 13
Enclosure Baffle
BAM
SPLAT
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing!
Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an
undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is too
loud and may permanently damage your hearing. Please use common sense when controlling volume.
Machine
Screws
10-24
With the help of an assistant, insert the BAM and start
fastening the corner hardware. Remove the masking tape.
Tighten the Phillips Head Machine Screws to secure the
BAM to the enclosure
baffle. See Figure 14.
Figure 15
GARANTÍA INTERNACIONAL
VersiónEspañol
SPAIR
Connect
Speaker
Cable
Comuníquese con su concesionario o distribuidor Kicker internacional para obtener infor ación sobre procedimientos
específicos relacionados con las normas de garantía de su país.
Enclosure
Baffle
Wires
Figure 14
ADVERTENCIA: Los excitadores Kicker son capaces de producir niveles de sonido que pueden dañar
permanentemente el oído. Subir el volumen del sistema hasta un nivel que produzca distorsión es más dañino para el
oído que escuchar un sistema sin distorsión al mismo volumen. El dolor es siempre una indicación de que el sonido es
muy fuerte y que puede dañar permanentemente el oído. Sea precavido cuando controle el volumen.
Pull the speaker cable wires (used to connect the subwoofer to the
amplifier) through the BAM and connect them to the SPAIR’s
Binding Posts. The Locator Pin and Locator Hole will properly align
INTERNATIONALE GARANTIE
DeutscheVersion
Nehmen Sie mit Ihren internationalen Kicker-Fachhändler oder Vertrieb Kontakt auf, um Details über die
Garantieleistungen in Ihrem Land zu erfahren.
the SPAIR to the BAM.
Remove
Gap Cap
Locator Hole
Locator Pin
See Figure 15.
BAM
SPAIR
WARNUNG: KICKER-Treiber können einen Schallpegel erzeugen, der zu permanenten Gehörschäden führen kann!
Wenn Sie ein System auf einen Pegel stellen, der hörbare Verzerrungen erzeugt, schadet das Ihren Ohren mehr, als ein
nicht verzerrtes System auf dem gleichen Lautstärkepegel. Die Schmerzschwelle ist immer eine Anzeige dafür, dass
der Schallpegel zu laut ist und zu permanenten Gehörschäden führen kann. Seien Sie bei der Lautstärkeeinstellung
bitte vernünftig!
Enclosure
Baffle
Remove the Gap Cap before
inserting the SPAIR.
See Figure 16.
Enclosure
Baffle
GARANTIE INTERNATIONALE
VersionFrançaise
SPAIR
Pour connaître les procédures propres à la politique de garantie de votre pays, contactez votre revendeur ou
distributeur International Kicker.
Locator
Hole
AVERTISSEMENT: Les haut-parleurs Kicker ont la capacité de produire des niveaux sonores pouvant endommager
l'ouïe de façon irréversible ! L'augmentation du volume d'un système jusqu'à un niveau présentant une distorsion
audible endommage davantage l'ouïe que l'écoute d'un système sans distorsion au même volume. Le seuil de la
douleur est toujours le signe que le niveau sonore est trop élevé et risque d'endommager l'ouïe de façon irréversible.
Réglez le volume en faisant prevue de bon sens !
Carefully insert the SPAIR back into
the BAM; do not damage the voice
BAM
coil. The Locator Pin on the BAM and
the Locator Hole in the SPAIR must
line up. The ARCTIC (Aluminum Rapid
Figure 16
Enclosure
Baffle
Cooling Thermal Induction Centering)
Cap, located on the top of the extended pole piece of the SPAIR, will
help to center the SPAIR as you lower it into the BAM. When properly
aligned these assemblies easily slide together. See Figure 17.
Locator Pin
BAM
Figure 17
P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • (405) 624-8510
03062007+07SOLOX
SOLOXSUBWOOFER
6
7
|