6.5” In-Ceiling Speaker
R-1650-CSM
Perfect for use in bathrooms, closets,
hallways or anywhere else multiple
speakers would be impractical, the
R-1650-CSM delivers powerful and
dynamic performances to some of the
most difficult installation locations.
• Single speaker accepts two-channel input
• Separate tweeters for each channel to preserve stereo effect
• Paintable to match ceiling
• Packaged individually
The R-1650-CSM employs a 6.5-inch
polymer-cone woofer and a large motor
structure for high sensitivity and strong
bass output. Dual voice coils sum the low
frequencies from a stereo input to mono.
Upper frequencies are handled individu-
ally for the two channels by a coaxially
mounted dual-tweeter array, preserving
the stereo effect.
S p e c i f i c a t i o n S
frequency response
power handling
sensitivity
50Hz-20kHz +/- 3dB
35 watts (140 watts peak)
87dB @ 2.83V/1 meter
8 ohms compatible
nominal impedance
drive components
Two-way system using dual 1”
(2.5cm) polymer dome, tweeter and
one 6.5” (16.5cm) poly woofer
The speaker’s mounting system makes
installation a breeze, while its paintable
aluminum grille provides added rust
protection in moisture-prone areas such
as bathrooms, kitchens and saunas.
dimensions
cutout dimensions
installation kit
weight
9.5” (24.1cm)
8.3” (21cm)
IK-650-C (sold separately)
5.3 lbs (2.4 kg)
While the R-1650-C will fit into our latest
IK-650-C installation kit, it can also be
used in conjunction with the ME-650-C
fire-rated enclosure.
accessories
ME-650-C fire-rated enclosure
(sold separately)
2006
built from
1-800-KLIPSCH
All specifications are subject to change without notice. ©2007
|