KH 526
ᕡ
ᕢ
ᕣ
ᕤ
ᕥ
ᕦ
KH 526
Content
Page
Introduction
Proper use
Technical data
Description
Before start-up
Safety
4
4
4
4
4
5
6
Operation
Installing the mixing unit
Food processing
Selecting the suitable speed level.
Utilizing the whole range of applications
6
6
6
7
Useful tips
Cleaning
8
8
Rinsing out the installed mixing unit
Thorough cleaning of the cutters
After Cleaning
8
8
9
Disposal
9
9
9
Warranty and Service
Importer
Keep this manual for future reference and pass it on with the equipment to any
future users.
- 3 -
ꢀ
KH 526
Blender KH 526
Introduction
Technical data
Rated voltage:
220-240 V ~
50 Hz
Estmeemed Customer,
Rated output:
KB time:
600 Watt
2 Minutes
Our products are designed to fulfil the
highest requirements of quality, functio-
nality, and design. We hope that you will
enjoy using your new “BIFINETT“ appli-
ance.
Capacity of the
mixing unit:
Max. capacity:
C.O. Time:
1.75 l
1.5 l
2 Minutes
C.O. Time
The C.O. Time (Continuous Operation)
details how long an appliance may be
used without the motor overheating
and being damaged. When the given
C.O. Time has been reached, the applian-
ce must be switched off until the motor
has cooled itself down.
Proper use
The appliance is suitable for mixing, pu-
reeing, kneading/ stirring and emulsify-
ing various types of foodstuffs. This ap-
pliance can be used even to cut and
crush ice.
You will find the exact procedures and
corresponding output levels in the sec-
tion entitled “Food processing”.
Cores, large seeds and stems/ stalks must
be removed before feeding the food-
stuffs into the appliance.
Only original attachments and accesso-
ries, as described , may be used.
Any other usage or changes count as
contrary to instructions and harbour
great danger of accidents. The manufac-
turer takes no responsibility for dama-
ge(s) arising out of usage that is contrary
to the instructions laid down.
Description
ᕡ Measuring cup
ᕢ Lid
ᕣ Mixing unit
ᕤ Cutting blade
ᕥ Mounted motor unit
ᕦ Switch
Before start-up
˼ Carefully clean all the component
parts before using the blender for the
first time. (see section: Cleaning).
˼ Connect the appliance to the power
source.
Not for commercial use.
- 4 -
ꢀ
KH 526
Safety
• Do not expose the appliance to the
rain and never use it in a humid or
wet environment. Make sure that the
cable never gets damp or wet while
the appliance is in use.
ƽ Important safety instructions
The following safety instructions must
always be adhered to when using elec-
trical appliances:
These directions will help you avoid
severe injuries and/or heavy damage(s),
and enable you to achieve better results
and/or output.
In order to avoid the danger of fire
and/or injuries:
• Never leave the appliance unattended
whilst in use.
Please read the following information
regarding safety measures and appropri-
ate usage carefully. Open the page with
the illustrations before you begin
reading and make yourself familiar with
all the functions of the appliance.
Preserve these directions carefully and
pass them on, if and when necessary, to
others too.
• Caution! Keep children away from the
connecting cable and the appliance.
Children frequently underestimate
the danger from electrical appliances.
Ensure a safe location for the
appliance.
• Ensure that the power plug is quickly
reachable in case of danger, and also
that there is no danger of tripping
over the cable.
To avoid life-threatening electric shocks:
• In order to avoid injuries, make sure
that all the component parts are pro-
perly connected and installed.
• Ensure that the lid is properly secured
before switching on the appliance.
• Never use the appliance with an emp-
ty mixing unit.
• The voltage of the power source must
match the stipulations given on the
plate with the details of the model
affixed to the appliance. Appliances
requiring 220-240 V.
• Never immerse the mounted motor
unit in water. Wipe it instead with a
damp cloth to clean it.
• To avoid the risk of electric shock, ar-
range for a damaged power cable or
plug to be exhanged as soon as possi-
ble by authorised specialists or
Customer Services.
• Arrange for appliances that are dama-
ged or do not function properly to be
inspected and repaired by Customer
Services as soon as possible.
• Never remove the lid while the appli-
ance is in use.
• Danger of injury! The cutting blade is
very sharp. Handle it with extreme
caution.
• Do not touch any rotating parts.
• Turn the appliance off after use and
pull out the power plug. Only when
the motor has come to a complete
stop may the appliance be disassem-
bled.
• Never use the appliance:
- if individual components, the con-
necting cable or the power plug are
damaged,
- 5 -
ꢀ
KH 526
- in case of malfunctioning of the
appliance, or if it has been otherwise
damaged or has fallen down.
• Allow hot liquids to cool to a luke-
warm temperature (approx. 30-40°C)
before you pour them into the mixing
unit. You thus avoid the risk of burns.
• Give the appliance for examination
and/or repair only to an authorized
service outlet.
• The use of attachments and accesso-
ries that are not recommended or
sold by the manufacturer can cause fi-
re, electric shocks and/or injuries.
Operation
Installing the mixing unit
˼ Make sure that the appliance is
switched off (Switch in the “Off”
position).
A safe approach:
˼ Place the mixing unit on the mounted
motor unit and press it down till it is
securely engaged. If the mixing unit is
not properly positioned, the applian-
ce does not allow itself to be swit-
ched on.
• In case of danger, immediately pull
out the power plug from the power
point.
• Never use the appliance for purposes
other than those for which it was de-
signed.
• Always stay attentive! Always pay at-
tention to what you are doing and act
rationally. Never use the appliance
when you are distracted or don’t feel
well.
• Make sure that the appliance is cor-
rectly and completely assembled befo-
re you use it.
• The appliance may be used only after
it has been assembled as per the in-
structions, and when the cover is firm-
ly fitted on and closed.
Food processing
˼ Fill the mixing unit with the food-
stuffs, which are to be processed.
˼ Place the lid on the mixing unit and
close it firmly. Ensure that the protru-
sion on the lid lies over the pourer on
the mixing unit. To firmly secure the
measuring cap, place it in the lid
opening and turn it in a clockwise
direction.
˼ Turn on the motor.
• Each time you have finished using the
appliance, make sure that the switch
is in the “Off” position.
Note: This appliance works only when
the mixing unit is attached to the
motor unit.
• Remove the detachable parts only
when the motor has come completely
to rest.
Selecting the suitable speed level.
• Level 1-3
• Detach the power plug and cable
from the appliance when it is not in
use, when you detach parts or before
cleaning the appliance.
for light usage with liquids
• Level 3-5
for a firmer consistency – for the
mixing of liquids and solid foods.
• Do not use the appliance in the open.
- 6 -
ꢀ
KH 526
• Position “Ice Crush/Clean”
for use in short, powerful bursts.
(The switch does not stay in the
“Ice Crush” position. Hold the switch
down in the “Ice Crush” position or
turn it repeatedly to the “Ice Crush”
position.)
Application:
Kneading and
stirring (1)
pancake dough
(2) yoghurt,
beverages and
desserts
Level:
(1) 5
After using the appliance turn the
switch to the “Off” position and pull out
the power plug.
In order to remove the mixing unit, pull
it straight up. It does not need to be
turned.
(2) 4-5
max. quantity:
Time:
(1) 1.3kg
(2) 650 g
(1) 1 Min.
(2) 1.5 - 2 Min.
Notice: After every use check the cutters
Application:
Emulsifying
for their funtionality.
Level:
5
Utilizing the whole range of
applications
max. quantity:
2 eggs
30g-400g oil
1-2 Min.
Time:
Application:
Mixing:
All kinds of
liquids, (1)
beverages, (2)
Application:
Cutting and crus-
hing ice
Level
Ice Crush
Level:
max. quantity:
1-3
max. quantity:
180g ice cubes
(= approx. 7 cu-
bes)
(1) 1.5 litres
(2) 1.25 litres
40-60 seconds
Time:
Time:
as required
Directions:
Application:
Pureeing:
Feed the ice cubes into the mixing
unit whilst the motor is off; secure the
cover and then switch the motor on.
Vegetables, fruit,
gravies, baby
food
Level:
5
max. quantity:
Time:
1.3 kg
1.5 - 2 Min.
- 7 -
ꢀ
KH 526
Useful tips
With stubborn/dried on soiling the mix
container can be cleaned in the dishwas-
her. The mix container is suitable for
dishwashers
˼ In order to get the best results while
pureeing solid ingredients, gradually
feed only small portions into the
mixing unit instead of filling it at
once with a large quantity.
Thorough cleaning of the cutters
˼ When you want to process solid
foods, cut them into small pieces
(2-3 cm).
˼ While mixing with solid foods, begin
with a small quantity of liquid.
Gradually add more liquid through
the cover opening to the mixed mass.
˼ Always place your hand only on top
of the mixer while using it.
˼ NEVER pour hot fluids into the appli-
ance. This could cause irreparable
damage to the appliance.
˼ For the kneading of solid or semi-
solid foods we recommend that the
appliance be used in the Ice
Should the cutters not be clean despite
having been in the dishwasher, you can
dismantle the mixing unit and clean the
cutters individually.
˼ Ensure that the mixing unit is comple-
tely empty before removing the cut-
ters. Take care in the handling of the
cutters.
Make sure that the appliance is swit-
ched off and that the power plug is
removed from the power socket. First
remove the mixing unit from the moun-
ting on the motor unit.
Crush/Clean mode in order to prevent
the cutting blade from seizing.
Ạ
ạ
Cleaning
Rinsing out the installed mixing unit
˼ Empty the mixing unit and fill it with
water. Place it on the motor unit and
turn the switch repeatedly to the Ice
Crush/Clean position. Empty the
mixing unit and rinse it out till it is
clean. Possible residues on the walls
of the mixing unit can be removed
with a dishwashing brush.
Ả
Important: In most cases, the mixing unit
is now already hygienically clean.
- 8 -
ꢀ
KH 526
Warning: Risk of injury! Due to the
sharp cutting blades and the glass
mixing unit proceed with great care.
Disposal
Do not dispose of the device in
˼ Remove the measuring cap from the
lid opening and place the mixing unit
on the lid, so that the underside is
facing upwards.
˼ Insert the tenons Ạ of the measuring
cap in the slots of the locking ring ạ
on the underside of the mixing unit.
˼ Turn the measuring cap counter-
clockwise, so that the locking ring ạ
can be removed.
normal domestic waste.
Dispose of the device over a registered
waste disposal firm or through your
communal waste disposal facility.
Observe the currently valid regulations.
In case of doubt, consult your waste
disposal facility.
Dispose of the packaging materi-
als in an environmentally respon-
sible manner.
˼ Remove the locking ring ạ.
˼ With great care remove the cutters
and the sealing washer Ả.
Danger of Injuries: Clean the cutters very
Warranty and Service
carefully. They are very sharp.
The warranty conditions and service cen-
tre address can be found in the enclosed
warranty slip.
After Cleaning
˼ Replace the sealing washer Ả, the
cutters and the locking ring ạ into
their positions.
˼ Insert the tenons Ạ on the measuring
cap into the slots of the locking ring
ạ on the underside of the mixing
unit.
˼ Turn the measuring cap clockwise, so
that the locking ring ạ once again
sits firmly on the mixing unit.
˼ The mixing unit can now be upturned
and the measuring cap placed onto
the lid.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
Subject to technical changes.
- 9 -
ꢀ
|