Kramer Electronics, Ltd.
USER MANUAL
Models:
RC-2C, Wall Plate / RS-232 / IR Controller
RC-2, Wall Plate / RS-232 Controller
Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range
of problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better! Our 1,000-plus different models
Congratulations on purchasing your Kramer RC-2C Wall Plate / RS-232/ IR
Controller and/or the RC-2 Wall Plate / RS-232 Controller which are available
in European (80mm and 86mm versions) and American versions.
The package includes the following items:
•
RC-2C Wall Plate / RS-232/ IR Controller or RC-2 Wall Plate / RS-232
Controller
•
•
Power supply (12V DC input)
This user manual2
2
Getting Started
We recommend that you:
•
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•
•
Review the contents of this user manual
Use Kramer high performance high resolution cables3
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:
Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories
and Rack Adapters; GROUP 11: Sierra Products
2 Download up-to-date Kramer user manuals from the Internet at: http://www.kramerelectronics.com
1
Overview
3
Overview
OUT port (for the RC-2C only) and two backlit and label capable buttons. It
sends an RS-232 command—with the push of a button—to a device (such as a
projector, display or switcher) via serial control protocols.
Each button can be assigned with a trigger containing up to four actions for
RC-2 and up to eight actions for RC-2C.
To achieve the best performance avoid interference from neighboring electrical
appliances and position your Kramer RC-2C/RC-2 away from moisture,
excessive sunlight and dust.
1 Available as a 1 Gang wall plate for the USA or a 1 Gang wall plate for Europe (in two sizes: 8.6cm and 8cm)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
2
Your RC-2C/RC-2
4
Your RC-2C/RC-2
Belgium and Germany, one for England and Europe (except Belgium and
Germany), and one for the United States:
Destination: England and Europe
Destination: Belgium and Germany
Destination: United States
Rear Panel Labels
for the RC-2C Only
RC-2C
Figure 1: RC-2/RC-2C for Europe and the United States
1 The RC-2C front panel has the same appearance as the RC-2 panel
3
Your RC-2C/RC-2
Figure 2: RC-2C Rear Panel
Table 1: Features and Functions of the RC-2C
Function
#
Feature
1
RC-2C Front Panel
PROGRAM ENABLE Switch
GND PIN
Front panel, including two control buttons
For technical support use only
2
3
Connect to an IR emitter cable
IR OUT PIN
4
5
+12V PIN
Connects (-) to the Ground
GND PIN
Connects (+) to the connector for powering the unit
RS-232 Terminal Block
Connector
Connect to the RS-232 connector on the A/V equipment or a
KRAMER: SIMPLE CREATIVE TECHNOLOGY
4
Your RC-2C/RC-2
Figure 3: RC-2 Rear Panel
Table 2: Features and Functions of the RC-2
#
Feature
Function
1
RC-2 Front Panel
PROGRAM ENABLE Switch
GND PIN
Front panel, including two control buttons
For technical support use only
Connects (-) to the Ground
2
3
+12V PIN
Connects (+) to the connector for powering the unit
4
RS-232 Terminal Block
Connector
Connect to the RS-232 connector on the A/V equipment or a PC
5
Your RC-2C/RC-2
4.1 The RS-232 PINOUT
RS-232 PINOUT
5
4
3
GND
9
8
7
6
Rx
Tx
2
1
Figure 4: RS-232 PINOUT Connection
Table 3: RS-232 PINOUT Connection
Connect this PIN on the
To this PIN on the
Terminal Block Connector:
9-pin D-sub Connector
Tx
PIN 2
PIN 3
PIN 5
Rx
GND
4.2 Connecting the IR-OUT (for the RC-2C Only)
to IR OUT, the black side connects to the Ground, and the LED Emitter Shell is
affixed to the IR sensor window with the adhesive layer.
Figure 5: IR Emitter Wiring
1 Using the Kramer 3.5mm to IR Emitter Control Cable (C-A35/IRE-10)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
6
Installing the Configuration Software
5
6
Installing the Configuration Software
Download the K-Config configuration software from our Web site and install it
Configuring the RC-2C/RC-2 Buttons
Before you configure the RC-2C/RC-2 buttons:
1. Connect the power to the RC-2C/RC-2 and connect the RS-232 terminal
block connector on the RC-2C/RC-2 unit to the 9-pin D-sub COM port
2. Open the K-Config program.
The main K-Config window appears.
3. Follow the instructions in the K-Config guide to configure the
RC-2C/RC-2 buttons.
7
Technical Specifications
Table 4 defines the technical specifications:
PORTS:
1 RS-232 on a terminal block connector
IR OUT on a terminal block connector (for RC-2C only)
POWER SOURCE:
DIMENSIONS:
12V DC/500mA adapter, 40mA
For the USA:
6.9cm x 1.6cm x 11.4cm (2.72" x 0.63" x 4.49", W, D, H)
For Europe:
8.6cm x 1.6cm x 8.6cm (3.39" x 0.63" x 3.39", W, D, H), the “86mm version” or
8cm x 1.6cm x 8cm (3.15" x 0.63" x 3.15", W, D, H), the “80mm version”
WEIGHT:
0.3kg (0.67lbs.) approx
ACCESSORIES:
OPTIONS:
K-Config software
RS-232 9-pin D-sub port to 3-pin terminal block connector cable (C-D9F/3PM-0.6)
1 Download up-to-date Kramer user manuals and guides from the Internet at this URL: http://www.kramerelectronics.com
2 Specifications are subject to change without notice
7
LIMITED WARRANTY
Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the
following terms.
HOW LONGIS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by thewarranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
IF TAMPERED sticker has been torn, reattached, removed or otherwise interfered with.
3. Damage, deterioration ormalfunctionresultingfrom:
i) Accident, misuse, abuse, neglect, fire, water, lightning orotheractsofnature
ii) Product modification, orfailureto followinstructions supplied with theproduct
iii) Repairorattemptedrepairby anyonenot authorized byKramer
iv) Anyshipment oftheproduct(claims must bepresentedtothe carrier)
v) Removalorinstallationoftheproduct
vi) Anyothercause, whichdoes not relateto aproduct defect
vii) Cartons, equipment enclosures, cables or accessoriesusedinconjunctionwiththeproduct
WHAT WE WILLPAY FOR AND WHAT WE WILLNOT PAY FOR
Wewill pay laborand material expensesforcovered items.Wewill notpayforthefollowing:
1. Removal orinstallationscharges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsibility oftheKramerdealerfromwhomtheproduct was purchased.
3. Shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATION OFIMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
EXCLUSION OFDAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall
not beliable for:
1. Damage to otherproperty caused by defects inthis product, damages basedupon inconvenience, loss ofuseof theproduct, loss
oftime, commercialloss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations andexclusions maynot applytoyou.
Thiswarranty gives youspecificlegalrights, andyou may alsohaveotherrights, which varyfromplacetoplace.
NOTE:Allproducts returned to Kramerforservicemust havepriorapproval.Thismay be obtained fromyourdealer.
Thisequipment has been testedtodeterminecompliancewith therequirements of:
EN-50081:
"Electromagneticcompatibility(EMC);
genericemissionstandard.
Part 1: Residential, commercial and lightindustry"
"Electromagneticcompatibility(EMC)genericimmunitystandard.
Part 1: Residential, commercialand lightindustryenvironment".
FCC* Rules and Regulations:
EN-50082:
CFR-47:
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
CAUTION!
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
UsethesuppliedDCpowersupply to feed power to themachine.
Pleaseuserecommended interconnection cablestoconnect themachineto other components.
* FCCand CEapproved using STPcable(fortwisted pairproducts)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
8
For the latest information on our products and a list of Kramer
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
2900- 000546
3
P/N:
Rev:
Kramer Electronics, Ltd.
E-mail: [email protected]
P/N: 2900-000546 REV 3
|