Kyocera Cell Phone S2410 User Manual

Openwave is a trademark of Openwave Systems

Incorporated. eZiText is a registered trademark of

Zi Corporation. TransFlash is a trademark of

SanDisk Corporation. Bluetooth trademarks are

owned by Bluetooth SIG, Inc. and used by

Kyocera Wireless Corp. under license.

S2410 User Guide

This manual is based on the production version of

the Kyocera S2410 phone. Software changes may

have occurred after this printing. Kyocera reserves

the right to make changes in technical and product

specifications without prior notice. The products

and equipment described in this documentation are

manufactured under license from QUALCOMM

Incorporated under one or more of the following

U.S. patents:

All other trademarks are the property of

their respective owners.

4,901,307 5,109,390 5,267,262 5,416,797 5,506,865

5,544,196 5,657,420 5,101,501 5,267,261 5,414,796

5,504,773 5,535,239 5,600,754 5,778,338 5,228,054

5,337,338 5,710,784 5,056,109 5,568,483 5,659,569

5,490,165 5,511,073

Kyocera Wireless Corp.

82-K8216-1EN, Rev. 001

FCC Notice

The Kyocera Wireless Corp. (“KWC”) products

described in this manual may include copyrighted

KWC and third party software stored in

This device complies with part 15 of the FCC

rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation. To maintain

compliance with FCC RF exposure guidelines, if

you wear a handset on your body, use the Kyocera

Wireless Corp. (KWC) supplied and approved

accessory designed for this product. Using

semiconductor memories or other media. Laws in

the United States and other countries preserve for

KWC and third party software providers certain

exclusive rights for copyrighted software, such as

the exclusive rights to distribute or reproduce the

copyrighted software. Accordingly, any copyrighted

software contained in the KWC products may not

be modified, reverse engineered, distributed or

reproduced in any manner not permitted by law.

accessories that are not supplied or approved by

KWC may violate FCC RF exposure guidelines.

Furthermore, the purchase of the KWC products

shall not be deemed to grant—either directly or by

implication, estoppel, or otherwise—any license

under the copyrights, patents, or patent

applications of KWC or any third party software

provider, except for the normal, non-exclusive

royalty-free license to use that arises by operation

of law in the sale of a product.

Other accessories used with this device for

body-worn operations must not contain any

metallic components and must provide at least

15 mm separation distance including the

antenna and the user’s body.

THIS MODEL PHONE MEETS THE

GOVERNMENT’S REQUIREMENTS FOR

EXPOSURE TO RADIO WAVES.

Kyocera is a registered trademark of Kyocera

Corporation. Brick Attack and Race 21 are

trademarks of Kyocera Wireless Corp.

QUALCOMM is a registered trademark of

QUALCOMM Incorporated.

Your wireless phone is a radio transmitter and

receiver. It is designed and manufactured to not

exceed the emission limits for exposure to radio

frequency (RF) energy set by the Federal

While there may be differences between the

SAR levels of various phones and at various

positions, they all meet the government

requirement for safe exposure.

Communications Commission of the U.S.

Government. These limits are part of

The FCC has granted an Equipment

Authorization for this model phone with all

reported SAR levels evaluated as in compliance

with the FCC RF emission guidelines. SAR

information on this model phone is on file with the

FCC and can be found under the Display Grant

section www.fcc.gov/oet/ea after searching on the

FCC ID: OVF-K33BI04.

comprehensive guidelines and establish permitted

levels of RF energy for the general population. The

guidelines are based on standards that were

developed by independent scientific organizations

through periodic and thorough evaluation of

scientific studies. The standards include a

substantial safety margin designed to assure the

safety of all persons, regardless of age and health.

Additional information on SAR can be found

on the Cellular Telecommunications and

Internet Association (CTIA) web-site at

www.wow-com.com.

The exposure standard for wireless mobile phones

employs a unit of measurement known as the

Specific Absorption Rate, or SAR. The SAR limit set

by the FCC is 1.6 W/kg.*

* In the United States and Canada, the SAR limit for

mobile phones used by the public is 1.6 watts/kg

(W/kg) averaged over one gram of tissue. The

standard incorporates a substantial margin of

safety to give additional protection for the public

and to account for any variations in measurements.

Tests for SAR are conducted using standard

operating positions specified by the FCC with the

phone transmitting at its highest certified power

level in all tested frequency bands.

Although the SAR is determined at the highest

certified power level, the actual SAR level of the

phone while operating can be well below the

maximum value. This is because the phone is

designed to operate at multiple power levels so as

to use only the power required to reach the network.

In general, the closer you are to a wireless base

station antenna, the lower the power output.

Bluetooth Certification

For information about S2410 Bluetooth

Certification, visit the Bluetooth Qualification

Program Web site at qualweb.bluetooth.org.

Caution

The user is cautioned that changes or modifications

not expressly approved by the party responsible for

compliance could void the warranty and user’s

authority to operate the equipment.

Before a phone model is available for sale to the

public, it must be tested and certified by the FCC

that it does not exceed the limit established by the

government-adopted requirement for safe

exposure. The tests are performed in positions and

locations (e.g., at the ear and worn on the body) as

required by the FCC for each model.

Optimize your phone’s performance

Use the guidelines in this user guide to learn how to

optimize the performance and life of your phone

and battery.

Body-worn measurements differ among phone

models, depending upon availability of accessories

and FCC requirements.

User Guide

iii

Air Bags

Potentially unsafe areas

If you have an air bag, DO NOT place installed or

portable phone equipment or other objects over the

air bag or in the air bag deployment area. If

equipment is not properly installed, you and your

passengers risk serious injury.

Posted facilities—Turn your phone off in any

facility when posted notices require you to do so.

Aircraft—FCC regulations prohibit using your

phone on a plane that is in the air. Turn your

phone off or switch it to Airplane Mode before

boarding aircraft.

Medical devices

Vehicles—RF signals may affect improperly

installed or inadequately shielded electronic

systems in motor vehicles. Check with the

manufacturer of the device to determine if it is

adequately shielded from external RF energy.

Pacemakers—Warning to pacemaker wearers:

Wireless phones, when in the ‘on’ position, have

been shown to interfere with pacemakers. The

phone should be kept at least six (6) inches away

from the pacemaker to reduce risk.

Blasting areas—Turn off your phone where

blasting is in progress. Observe restrictions, and

follow any regulations or rules.

The Health Industry Manufacturers Association and

the wireless technology research community

recommend that you follow these guidelines to

minimize the potential for interference.

Potentially explosive atmospheres—Turn off your

phone when you are in any area with a potentially

explosive atmosphere. Obey all signs and

instructions. Sparks in such areas could cause an

explosion or fire, resulting in bodily injury or death.

Areas with a potentially explosive atmosphere are

often, but not always, clearly marked.

•

Always keep the phone at least six inches

(15 centimeters) away from your pacemaker

when the phone is turned on.

•

Do not carry your phone near your heart.

Use the ear opposite the pacemaker.

If you have any reason to suspect that

interference is taking place, turn off your

phone immediately.

They include:

•

fueling areas such as gas stations

below deck on boats

transfer or storage facilities for fuel or

chemicals

Hearing aids—Some digital wireless phones

may interfere with hearing aids. In the event of

such interference, you may want to consult your

service provider or call the customer service line

to discuss alternatives.

•

vehicles using liquefied petroleum gas, such as

propane or butane

areas where the air contains chemicals or

particles such as grain, dust, or metal powders

any other area where you would normally be

advised to turn off your vehicle engine

Other medical devices—If you use any other

personal medical device, consult the manufacturer

of the device to determine if it is adequately

shielded from external RF energy. Your physician

may be able to help you obtain this information.

Using phone with care

In health care facilities—Turn your phone off in

health care facilities when instructed. Hospitals and

health care facilities may be using equipment that is

sensitive to external RF energy.

Use only in normal position (to ear). Avoid dropping,

hitting, bending, or sitting on the phone.

•

NCRP Report 86 (National Council

on Radiation Protection and

Measurements, 1986)

ICNIRP (International Commission on

Non-Ionizing Radiation Protection, 1996)

Avoiding magnetic environments

Keep the phone away from magnets which can

cause improper functioning of the phone.

Keeping phone dry

Keep the phone dry. Damage can result if the

phone gets wet. Water damage is not covered

under warranty.

Your phone complies with the standards set by

these reports and the FCC guidelines.

E911 mandates

Resetting the phone

Where service is available, this handset complies

with the Phase I and Phase II E911 Mandates

issued by the FCC.

If the screen seems frozen and the keypad does not

respond to keypresses, reset the phone by

completing the following steps:

Hearing Aid Compatibility (HAC) with Mobile Phones

1. Remove the battery door.

Some mobile phones and hearing devices (hearing

aids and cochlear implants), when used together,

result in buzzing, humming, or whining noises

detected by the user. Some hearing devices are

more immune than others to this interference noise,

and phones also vary in the amount of interference

they generate.

2. Remove and replace the battery.

If the problem persists, return the phone to the

dealer for service.

Accessories

Use only Kyocera-approved accessories with

Kyocera phones. Use of any unauthorized

accessories may be dangerous and will invalidate

the phone warranty if said accessories cause

damage or a defect to the phone.

The wireless telephone industry has developed

ratings for some of their mobile phones, to assist

hearing device users in finding phones that may be

compatible with their hearing devices. Not all

phones have been rated.

Radio Frequency (RF) energy

Your telephone is a radio transmitter and receiver.

When it is on, it receives and sends out RF energy.

Your service provider’s network controls the power

of the RF signal. This power level can range from

0.006 to 0.6 watts. In August 1996, the U.S. Federal

Communications Commission (FCC) adopted RF

exposure guidelines withsafetylevels for hand-held

wireless phones. These guidelines are consistent

with the safety standards previously set by both

U.S. and international standards bodies in the

following reports:

Phones that are rated have the rating on their box

or a label on the box. The ratings are not

guarantees and results will vary depending on the

user’s hearing device and hearing loss. If your

hearing device happens to be vulnerable to

interference, you may not be able to use a rated

phone successfully. Trying out the phone with your

hearing device is the best way to evaluate it for your

personal needs.

M-Ratings—Phones rated M3 or M4 meet

FCC requirements and are likely to generate

less interference to hearing devices than phones

that are not labeled. M4 is the better/higher of the

two ratings.

•

ANSI C95.1 (American National Standards

Institute, 1992)

User Guide

T-Ratings—Phones rated T3 or T4 meet FCC

requirements and are likely to be more usable with

a hearing device’s telecoil (“T Switch” or

“Telephone Switch”) than unrated phones. T4 is the

better/higher of the two ratings. (Note that not all

hearing devices have telecoils in them.)

Hearing devices may also be measured for

immunity to this type of interference. Your hearing

device manufacturer or hearing health professional

may help you choose the proper rating for your

mobile phone. The more immune your hearing aid

is, the less likely you are to experience interference

noise from mobile phones.

For more information about hearing aid

compatibility, visit the FCC's Consumer &

Governmental Affairs Bureau Web site at

www.fcc.gov/cgb/dro.

Kyocera Wireless Corp.

www.kyocera-wireless.com

To purchase accessories, visit

www.kyocera-wireless.com/store

Table of Contents

Message groups . . . . . . . . . . . . . . . . . . . . . . . . . 23

Getting Started. . . . . . . . . . . . . . . . . . . . . . 1

Phone battery. . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Phone overview . . . . . . . . . . . . . . . . . . . . . . . . . .3

Main menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Basic navigation . . . . . . . . . . . . . . . . . . . . . . . . . .7

Guide conventions . . . . . . . . . . . . . . . . . . . . . . . .7

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . .24

View contacts directory . . . . . . . . . . . . . . . . . . . 24

Add contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Customize contacts . . . . . . . . . . . . . . . . . . . . . . 25

Contact groups. . . . . . . . . . . . . . . . . . . . . . . . . . 28

Search contacts . . . . . . . . . . . . . . . . . . . . . . . . . 29

Delete all contacts . . . . . . . . . . . . . . . . . . . . . . . 29

Contacts count . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Basic Functions . . . . . . . . . . . . . . . . . . . . . 8

Power up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Make phone calls. . . . . . . . . . . . . . . . . . . . . . . . .8

Answer phone calls . . . . . . . . . . . . . . . . . . . . . . .8

End phone calls . . . . . . . . . . . . . . . . . . . . . . . . . .9

Verify your phone number . . . . . . . . . . . . . . . . . .9

Activate voice dialing . . . . . . . . . . . . . . . . . . . . . .9

Browser. . . . . . . . . . . . . . . . . . . . . . . . . . .30

Launch browser. . . . . . . . . . . . . . . . . . . . . . . . . 30

Use browser options . . . . . . . . . . . . . . . . . . . . . 30

Search for a Web site . . . . . . . . . . . . . . . . . . . . . 31

Use a bookmark . . . . . . . . . . . . . . . . . . . . . . . . 31

Check browser alerts . . . . . . . . . . . . . . . . . . . . . 31

Set Web alert . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Call Features . . . . . . . . . . . . . . . . . . . . . . 10

Volume control . . . . . . . . . . . . . . . . . . . . . . . . .10

Hold call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . .10

1-Touch dialing . . . . . . . . . . . . . . . . . . . . . . . . .10

Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Roaming calls . . . . . . . . . . . . . . . . . . . . . . . . . .11

Emergency services . . . . . . . . . . . . . . . . . . . . . .11

Airplane mode . . . . . . . . . . . . . . . . . . . . . . . . . .12

Downloads . . . . . . . . . . . . . . . . . . . . . . . .32

How does BREW work? . . . . . . . . . . . . . . . . . . . 32

Download an application . . . . . . . . . . . . . . . . . . 32

Open an application. . . . . . . . . . . . . . . . . . . . . . 33

View application details . . . . . . . . . . . . . . . . . . . 33

Remove an application. . . . . . . . . . . . . . . . . . . . 33

Disable an application . . . . . . . . . . . . . . . . . . . . 33

Check available memory . . . . . . . . . . . . . . . . . . 33

Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . 13

Text entry modes . . . . . . . . . . . . . . . . . . . . . . . .13

Text entry quick reference . . . . . . . . . . . . . . . . .15

10 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Voice memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Tip calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

World clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Recent Calls . . . . . . . . . . . . . . . . . . . . . . . 16

Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Kilobyte counter. . . . . . . . . . . . . . . . . . . . . . . . .17

Messaging . . . . . . . . . . . . . . . . . . . . . . . . 18

Text messages . . . . . . . . . . . . . . . . . . . . . . . . . .18

Erase messages . . . . . . . . . . . . . . . . . . . . . . . . .20

Work with messages. . . . . . . . . . . . . . . . . . . . . .20

Message settings. . . . . . . . . . . . . . . . . . . . . . . . .22

User Guide

vii

11 Media Gallery . . . . . . . . . . . . . . . . . . . . . . 39

Access folders. . . . . . . . . . . . . . . . . . . . . . . . . . 39

Browse images . . . . . . . . . . . . . . . . . . . . . . . . . 39

Browse sounds . . . . . . . . . . . . . . . . . . . . . . . . . 40

Delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Playback tools. . . . . . . . . . . . . . . . . . . . . . . . . . 40

12 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Menu options . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Convenience . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Voice features . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

13 Voice Commands. . . . . . . . . . . . . . . . . . . 55

Voice dial list . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Voice commands. . . . . . . . . . . . . . . . . . . . . . . . 55

Voice command settings . . . . . . . . . . . . . . . . . . 57

14 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 58

Customer support . . . . . . . . . . . . . . . . . . . . . . . 58

Qualified service . . . . . . . . . . . . . . . . . . . . . . . . 58

Phone accessories. . . . . . . . . . . . . . . . . . . . . . . 58

Become a product evaluator . . . . . . . . . . . . . . . 58

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

viii

Getting Started

Charge the battery

You must have at least a partial charge in the

battery to make or receive calls.

Phone battery

Install the battery

To install the battery:

To charge the battery:

1. Hold the phone

1. Connect the AC adapter

to the microUSB jack on

the side of the phone.

face down.

2. Find notch directly

below the back cover. It

is square. Using your

thumbnail, lift the cover

to remove.

2. Plug the adapter into a

wall outlet.

The battery icon in the

upper-right corner of the screen tells you whether

the phone is:

3. Place the battery in the

battery casing with the

metal contacts facing

toward the top of the

phone. The metal

•

Charging (the icon is animated)

Partially charged

Fully charged

You can safely recharge the battery at any time,

even if it has a partial charge.

contacts of the battery

must make contact with

the metal contacts of

the battery casing.

Warning: The battery will not charge if you use

the phone while it is connected to an AC adapter.

4. Replace the battery

door by lining up the

Note: Before removing the battery, make sure the

phone is powered off.

notches with the

openings at the top and on each side of the

battery casing.

5. Snap the cover into place.

User Guide

•

Replace the battery only with another qualified

battery. Use of an unqualified battery may

present a risk of fire, explosion, leakage, or

other hazard. If you are unsure about whether

a replacement battery is compatible, contact

customer support.

Promptly dispose of used batteries in

accordance with local regulations and

recycle if possible. Do not dispose as

household waste.

Supervise all battery usage by children.

Avoid dropping the phone or battery. If

the phone or battery is dropped, especially

on a hard surface, an internal short-circuit

can occur and pose a safety hazard. If you

suspect battery damage, take it to a service

center for inspection.

Battery care

General safety guidelines

•

Do not disassemble or open the battery.

Do not crush, bend, deform, puncture, or

shred the battery.

•

Do not attempt to insert foreign objects into

the battery.

Do not immerse the battery or expose it to

water or other liquids. Even if a battery

appears to dry out and operate normally,

internal parts can slowly corrode and pose a

safety hazard.

•

Always keep the battery between 15 °C and

25 °C (59 °F and 77 °F). Do not expose the

battery to extremes of temperature (heat or

cold), fire, or other hazards such as a cooking

surface, iron, or radiator.

•

Improper battery use may result in a fire,

explosion, or other hazard.

•

Never use any damaged battery.

Only use the battery for its intended phone.

Only use the battery with a qualified charger.

Use of an unqualified battery charger

may present a risk of fire, explosion,

leakage, or other hazard. If you are

unsure about whether a charger is

qualified, contact customer support.

Do not short-circuit the battery or

allow metallic conductive objects—such

as keys, coins, or jewelry—to contact

the battery’s terminals.

Common causes of battery drain

•

Playing games or using the Web.

Taking pictures with the flash on.

Keeping backlighting on.

Operating in digital mode when far away from

a base station or cell site.

Using data cables or accessories.

Operating when no service is available, or

service is available intermittently.

High earpiece and ringer volume settings.

Repeating sound, vibration, or lighted alerts.

•

Phone battery

Phone overview

Get to know your phone

The phone is shown here in the open position.

1. Earpiece speaker.

2. Home screen.

3. Left softkey accesses menus and functions on the left side of

the screen.

4. Navigation key scrolls through lists and text entry fields and

accesses shortcuts from the home screen.

5. Speakerphone key activates the speakerphone and answers

incoming calls.

6. Send key starts or answers a call. Press once to activate

voice command, twice to display the All Calls list, and three

times to redial the last number dialed. Press and hold to

access voice shortcuts.

7. Keypad for entering numbers, letters, or symbols.

8. * Shift key changes the text mode in text entry.

9. Right softkey accesses menus and functions on the right side

of the screen.

10. OK key selects a menu item or option.

11. Back key erases characters in text entry and returns you to

the previous screen when navigating through menus.

12. End key turns the phone on and off, ends a call or browser

session, and returns you to the home screen.

13. # Space key enters a space during text entry. Press and hold

to activate or deactivate Silent mode.

14. 0 Next key cycles through word choices during text entry.

15. Microphone.

User Guide

The phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent

accidental key presses.

1. Jack for a hands-free headset (sold separately).

2. Volume key raises or lowers ringer volume.

3. External screen displays time and phone status.

4. Jack for A/C power adapter (included) and for microUSB cable

(sold separately).

Warning: Inserting an accessory into the incorrect jack will

damage the phone.

Common keys

The following keys are pressed frequently when you use your phone. Throughout this user guide, these

keys will be referred as follows:

Send key (also referred to as the Talk key)

End key (also referred to as the Power key)

Back key

Navigation key

OK key

Left softkey

Right softkey

Speakerphone key

Phone overview

Screen icons

These icons may appear on your phone’s screen:

Bluetooth wireless technology is disabled (Off).

The phone is operating in IS95 digital mode.

The phone is roaming outside of its home

service area.

The phone is operating in IS2000 (1X)

digital mode.

New text message.

The phone is receiving a signal. You can

make and receive calls. Fewer bars indicate

a weaker signal.

New voice message.

The phone is in airplane mode.

A call is in progress.

New voice and text message.

The phone is set to light up instead of ring.

The phone has a high speed data connection.

The phone is set to vibrate or to vibrate and

then ring.

The phone is not receiving a signal. You cannot

make or receive calls.

The speaker phone is turned on.

Content is DRM protected.

Position location is set to your service provider

and to emergency services.

Data service is available and active on

your phone. Check with your service

provider for availability.

Position location is set to emergency

services only.

The phone is set to auto answer.

(blinking) The phone is sending data.

(blinking) The phone is receiving data.

The phone is in privacy mode or is accessing a

secure Web site.

Data service is available, but the phone is

dormant.

The alarm clock is set.

Bluetooth wireless technology is enabled (On).

The battery is fully charged. The more black

bars, the greater the charge.

User Guide

Main menu

The contents of the main menu are as follows:

Recent Calls

All

Incoming

Outgoing

Missed

Settings

Bluetooth

Convenience

Display

Tools

Voice Memo

Scheduler

Alarm Clock

Tip Calculator

Calculator

Timer

Sounds

Data

Voice Features

Accessories

Network

Erase Call List

Call Timer

Kilobyte Counter

Stopwatch

World Clock

Security

Contacts

View All

Add New

Groups

Speed Dial List

Voice Dial List

Erase Contacts

Contacts Count

Messaging

New Text Msg

Voicemail

Browser

Launches the Browser

Downloads

Accesses your downloaded content

Inbox

Browser Alerts

Sent Msgs

Outbox

Saved Msgs

Drafts

Msg Settings

Message Groups

Erase Msg

Phone Info

Build Info

Icon Keys

Media Gallery

Images

Sounds

Delete All

Note: The menu items on your phone can change depending on the services provided by your service provider.

Check with your service provider.

Main menu

Basic navigation

Pressing your phone keys accesses the various

menus and other features of your phone. Some of

the basic keys that are used frequently are:

Guide conventions

In this guide, the following conventions are used

when describing phone features.

Select means to press the left softkey, right

softkey or OK key to select an item seen on the

display. For example, “Select Menu” tells you to

physically press the left softkey to choose Menu

from the display.

•

Left softkey: Selects items that appear on the

lower left of the display. At the home screen,

you can select Menu.

Right softkey: Selects items that appear on

the lower right of the display. At the home

screen, you can select Contacts.

Navigation key: Scrolls through menus and

options. You can access the following

shortcuts from the home screen.

Press means to press a phone key. For

example, “Press the Send key to make a

phone call” tells you to physically press the

Send key on your phone.

Scroll means to use the Navigation key to move

through a list on the display. For example, “Scroll

through your Contacts list to choose a contact”

means to physically press the Navigation key up

or down to scroll through the list on the display.

–

Scroll left launches the browser.

Scroll right launches Voice Memo.

Scroll up displays the Custom menu.

Scroll down displays Recent Calls.

•

OK key: Selects a menu item.

Back key: Returns to the previous menu level.

End key: Returns to the home screen.

> (greater than symbol) tells you to select

an option from a menu or list. For example,

“Menu > Settings” means to:

1. Press the left soft key to select Menu.

2. Scroll to the Settings option.

3. Press the OK key to select Settings.

User Guide

Basic Functions

This section explains basic functionality of your

phone. For more detailed explanations of your

phone’s features, please refer to later chapters.

Call using a contact

1. Select Contacts to open your Contacts list.

2. Highlight a contact and press the Send key.

Power up

Call using voice commands

To turn your phone on, press and hold the End

You can use voice commands to call a contact

from your voice dial list or to dial a phone

number. For more information, see “Voice

Commands” on page 55.

key and wait until the phone display lights up.

To turn your phone off, press the hold the End

key until the phone plays a musical chime

and turns off.

Redial a number

Make phone calls

1. Press the Send key to open your call history.

Make sure you are in an area where a signal can

be received. Look for the signal strength icon on

the home screen. The more bars you see in this

symbol, the stronger the signal. If there are no

bars, move to where the signal strength is better.

2. Highlight a phone number or contact and

press the Send key.

Tip: To redial the last number called, received or

missed, press the Send key twice.

When the phone has been idle for a time, it

changes to power save mode. When you see

“Power Save” on your phone’s screen, press

any key to return to normal operating mode.

Answer phone calls

When a call comes in, the phone rings, vibrates,

or lights up. The phone number of the caller also

appears if it is not restricted. If the number is

stored in your contacts directory, the contact’s

name appears. There are several ways you can

answer a phone call.

There are several ways you can make a

phone call.

Call using a number

1. Enter a phone number.

2. Press the Send key.

Answer using earpiece

Press the Send key.

Power up

Answer using speakerphone

Press the Speakerphone key.

Answer using flip

You can set the phone to answer immediately

when you open the flip. This feature does not

apply to incoming data calls. For more

information, see “Open to answer” on page 46.

End phone calls

To end a phone call press the End key.

Verify your phone number

To verify your phone number, select Menu >

Phone Info > Build Info.

Activate voice dialing

1. Press and hold the Send key.

2. Follow the prompts.

For more information, see “Voice Commands” on

page 55.

User Guide

Call Features

This chapter describes call features such as

volume, holding calls, speed dialing and

other features.

Hold call

The Hold Call feature allows you to place

incoming calls on hold until you are ready to

answer them. See “Hold calls” on page 44.

Volume control

There are several ways to control the volume

of your phone.

Speed dialing

The Speed Dial feature allows you to assign a one-

or two-digit shortcut to a contact. Before you can

use speed dialing you must save a phone number

as a contact and assign a speed dial location to it.

See “Customize a number” on page 25.

Adjust volume during a call

To adjust the earpiece volume during a call,

press the Volume Up or Volume Down key.

To call a contact that has a speed dial location.

Use the speakerphone

1. Enter the one- or two-digit speed

Your phone has a built-in speakerphone. To turn

on the speakerphone, press the Speakerphone

key. The speakerphone icon appears on the

home screen when the speakerphone is on. To

turn off the speakerphone, press the

dial location.

2. Press the Send key.

1-Touch dialing

The 1-Touch Dialing feature is the fastest way to

speed dial a contact that has a speed dial location.

See “1-Touch dialing” on page 44.

Speakerphone key again.

Note: If you press the Speakerphone key during

an incoming call, you will answer the call.

Silence an incoming call

To silence the phone without answering the call

press a Volume key or select Ignore.

To silence the phone and answer the call,

press a Volume key or select Silence, then

press the Send key.

Volume control

Set voicemail alert

Voicemail

You can set the phone to beep or vibrate every five

minutes to remind you that you have voicemail.

For more information, see “Alerts” on page 22.

Configure your voicemail

Before your phone can receive voicemail

messages, you must set up a password and record

a personal greeting with your service provider.

Roaming calls

Set roaming alert

You can set phone to alert you when you roam

outside of your home service area. See “Roaming

service alert” on page 52.

When you have set up your voicemail, all

unanswered calls to your phone are automatically

transferred to voicemail, even if your phone is in

use or turned off.

1. Press and hold the 1 key.

2. Follow the system prompts to create a

Set roam ringer

password and record a greeting.

You can set a ringer to indicate when an incoming

call will be subject to roaming charges. See

“Roam ringer” on page 48.

Check your voicemail

When a voice message is received, your screen

displays a notification along with a voicemail

message icon at the top of your screen. The

symbol flashes if the message is urgent. If you

see a notification:

Set call guard

You can set the phone to warn you before you

answer or place a call while roaming. See “Roam

call alert” on page 53.

1. Select Call, which initiates a call to your

voicemail number.

Emergency services

Call emergency service

2. Follow the system prompts to retrieve

the message.

You can call an emergency code, even if your

phone is locked or your account is restricted.

When you call, your phone enters Emergency

mode. This enables the emergency service

exclusive access to your phone to call you back, if

necessary. To make or receive regular calls after

dialing the code, you must exit this mode.

Note: To clear the screen without checking

messages, select Ignore.

If you see only the voicemail message icon:

1. Press and hold the 1 key.

2. Follow the system prompts to retrieve

the message.

User Guide

To place dial an emergency code:

1. Enter your 3-digit emergency code.

2. Press the Send key.

Note: Regardless of your 3-digit emergency code

(911, 111, 999, 000, etc.), your phone operates

as described.

Exit emergency services

When you have completed the emergency call:

1. Select Exit.

2. Select Exit again to confirm your choice.

Note: To determine who has access to your

location, see “Location” on page 52.

Airplane mode

While in an airplane, you can set your phone to

Airplane mode where your phone does not emit

RF signals. See “Airplane mode” on page 43.

Airplane mode

Text Entry

You can enter letters, numbers, and symbols in

contacts, text messages, and your banner.

Note: The mode you start in depends on the task

you are doing. For example, when entering a

phone number, you’re in numbers only mode.

When entering a name for a contact, you’re in

normal alpha mode.

Text entry modes

The current text entry mode (and capitalization

setting, when applicable) are indicated by icons.

Enter numbers

The text entry screen has the following features:

•

To enter a number while in numbers only

1. Characters

remaining that

you can type.

mode, press a number key once.

•

To enter a number while in normal alpha or

Rapid mode, press and hold a number key

until the number appears on the screen.

Allowed length of

messages can

vary depending

on your service.

Enter words letter by letter

1. Press a key once for the first letter, twice for

the second letter, and so on. If your phone is

set to Spanish, accented letters are available.

2. Text entry fields.

3. Current capitalization setting.

4. Current text entry mode.

There are five text entry modes:

2. Wait for the cursor to move right and enter

the next letter.

Note: To enter a space, press # Space key.

ABC (case change)

123 (numbers only)

Abc (normal alpha)

Rapid

Enter words quickly

Add Symbol

When you press a series of keys using Rapid

mode, your phone checks its dictionary of

common words and guesses at the word you are

trying to spell.

1. For each letter of the word you want, press

the key once. For example, to enter the word

“any” press the 2 > 6 > 9 keys.

User Guide

2. If the word doesn’t match what you

want, press 0 Next key to look at other

word matches.

Change modes

Sometimes you need to change modes. For

example, to enter numbers in an email address

while in normal alpha mode, you must change to

numbers only mode, enter the numbers, and then

change back to normal alpha mode to complete

the address.

3. When you see the word you want, press

the # Space key.

Enter symbols

While entering text in normal alpha mode, you

can enter symbols by pressing the 1 key until you

see the symbol you want. Using this method, you

have access to the following symbols:

To change text entry modes, press and hold

* Shift key until the icon for the mode you want

appears at the top of the screen. You can also

select Options then select a different mode.

‘

]

Capitalization

To access the full set of symbols:

You can change capitalization at any time while

entering text. Simply press the * Shift key to

choose upper or lower case while in normal

alpha mode.

1. From the text entry screen select Options >

Add Symbol.

2. Scroll up or down to view the list of symbols.

3. Press the number key corresponding to the

symbol to enter it.

Change default text entry mode

You can change the default text entry mode when

creating a text message. For more information,

see “Default text” on page 23.

Text entry modes

Text entry quick reference

This table gives instructions for entering letters, numbers, and symbols.

To..

Do this...

Enter a letter

Use normal alpha mode and press a key until you see the letter your want. For

more options, see “Text entry modes” on page 13.

Enter a number

Enter a symbol

Use numbers only mode and press a key. For more options, see “Text entry

modes” on page 13.

In Abc mode, press the 1 key until you find the symbol you want. For more

options, see “Text entry modes” on page 13.

Enter a space

Press the # Space key.

Erase a character

Press the Back key.

Erase all characters

Move cursor right or left

Move cursor up or down

Change text entry modes

Capitalize any letter

Lowercase any letter

Initial caps

Press and hold the Back key.

Scroll left or right.

Scroll up or down.

Press and hold the * Shift key.

In normal alpha mode, press the * Shift key. Choose uppercase.

In normal alpha mode, press the * Shift key. Choose lowercase.

In normal alpha mode, press the * Shift key. Choose sentence case.

Select soft options on screen Press the appropriate left or right softkey.

User Guide

Recent Calls

–

Erase Record deletes the call from the

call list.

Call lists

Details on the calls you made, received, or missed

are stored in the Recent Calls list and are

identified by the following icons:

Note: If the phone number is classified as

“secret,” you must enter your four-digit lock code

to view or edit it.

Incoming call

Deal with a missed call

Outgoing call

When you have missed a call, “Missed Call”

appears on your screen. You can do one of

the following:

Missed call (flashing)

•

To clear the screen, select OK.

To view the call details, select Calls and

press the OK key.

To return the call, select Calls and press

the Send key.

View recent calls

1. Select Menu > Recent Calls and one of

•

the following:

–

All to view all calls made or received.

Incoming to view calls answered.

Outgoing to view calls made.

Missed to view calls received, but

not answered.

Erase call lists

You can erase your phone’s call lists.

1. Select Menu > Recent Calls >

Erase Call List > All, Incoming,

Outgoing, Missed, or Data Call.

–

Data to view data calls.

2. Highlight a recent call.

2. Select Yes.

3. Press the Send key to call the number, select

Details to view the call details, or select

Options and one of the following:

–

Save creates a new contact.

Send Text Msg sends a text message to

the number.

Call lists

Call timers

Kilobyte counter

Select Menu > Recent Calls > Kilobyte Counter

to track all the data you have sent and received

since you last reset this counter. To reset this

counter to zero, select Options > Reset.

View call timers

Select Menu > Recent Calls > Call Timer and

one of the following:

•

All tracks all calls you have made and

received. This timer cannot be reset.

Recent tracks all calls you have made and

received since you last reset this timer. To

reset this timer to zero, select Reset.

Home tracks all calls you have made and

received in your home network since you last

reset this timer. To reset this timer to zero,

select Reset.

•

Roam tracks all roaming calls you have made

and received since you last reset this timer. To

reset this timer to zero, select Reset.

Incoming tracks all incoming calls you have

received since you last reset this timer. To

reset this timer to zero, select Reset.

Outgoing tracks all incoming calls you have

made since you last reset this timer. To reset

this timer to zero, select Reset.

Time your calls

Your phone can alert with a short beep ten

seconds before each minute passes during a call.

For more information, see “Minute alert” on

page 46.

User Guide

Messaging

This chapter describes how to send, receive, and

erase messages from your phone. For information

on voicemail messages, see “Voicemail” on

page 11.

Attach Preset Text and other extras

During text entry, you can attach items such as

prewritten text (Preset Text) or symbols.

1. From the text entry screen, select Options

Note: The features and menus described in this

chapter may vary depending on services available

in your area. Check with your service provider for

details and possible usage charges.

and one of the following:

–

Insert QuickText inserts prewritten text

from a list.

Add Symbol inserts a symbol. Press

the corresponding number to select

a symbol.

Text messages

You can only send text messages to phones

that are capable of receiving them or to

email addresses.

2. Complete your message.

3. Select Send.

Use text message options

When you create a text message, you have several

options to help you.

Create a text message

1. Select Menu > Messaging > New Text Msg.

2. Enter a recipient’s phone number or

email address:

1. From the message entry screen, select

–

Select Options > Recent List,

Recent Calls, Contacts or Groups to

access your stored contacts.

Enter a new address manually.

See “Text Entry” on page 13.

Options and one of the following:

–

Add Address allows you to add

another recipient.

–

Save Message saves the messages in your

Drafts folder. The prevents the message

from being deleted if you activate the

Auto Erase feature.

You can message up to ten recipients at

once. Use comma or spaces to separate

addresses. If you select stored contacts, this

is done automatically. Scroll down to move

to the next field when done.

–

Save QuickText saves the message you

composed as a prewritten message.

3. Enter the message.

4. Select Send.

Text messages

–

Msg Settings > Msg Receipt alerts

you when a recipient has received

your message.

Msg Settings > Set Priority labels the

message as urgent.

Msg Settings > Callback Number

includes the callback number with

the message.

Msg Settings > Send Later schedules a

time to send the message.

Note: If you receive a new message while you are

reading a message, the one you are reading will

be replaced by the new one. The older message is

in the Inbox.

–

Message icons

If you see the message icon, select Menu >

Messaging > Inbox. Scroll to a message and

select View to open it.

–

View a text message

The options available when viewing a text message

may vary. Check with your service provider.

Msg Settings > Validity Period sets

a defined expiration time limit for

a message.

1. Select Menu > Messaging > Inbox.

2. After setting options, select Close.

3. Complete your message.

4. Select Send.

2. Scroll to a message and select View. If

the message is long, scroll down to view

entire message.

3. Select Reply to create a response message or

Retrieve a text message

Options and one of the following:

When a text message is received, your phone

displays a notification and the message icon

appears at the top of your screen. The message

icon flashes if the message is urgent. Urgent

messages are also marked in the Inbox.

–

Erase deletes the message.

Forward forwards the message.

Reply with Copy replies to the message

with a copy of the original attached.

Save Message saves the message to the

Saved Messages folder.

Save as Quick Text saves the message

text as Quick Text, which can be

inserted into other messages.

Graphics are not saved.

–

Message notifications

If you see a message notification, select Inbox to

view messages. Scroll to a message and select

View to open it. To clear a message notification,

select Ignore.

User Guide

–

Lock Msg / Unlock Msg protects the

message from being accidentally deleted.

Sender displays the sender information.

Work with messages

Here are some tips about messaging with

your phone.

Note: If a graphic is too large or incorrectly

formatted and is not received with the message,

an icon will appear.

Unable to send messages

You may not be able to send or receive messages

if your phone’s memory is nearly full, or if digital

service is not available at the time. To free up

memory, erase old messages. See “Erase

messages” on page 20.

Erase messages

It is a good idea to erase old messages to free up

memory in your phone. You can erase messages

and pages as you send or read them, erase them

one at a time, or erase them all at once.

Appended messages

If you go over the character limit for a single

message, the phone may automatically append an

empty segment to your message to make space.

Erase a single message

1. Select Menu > Messaging > Inbox,

Sent Msgs, Outbox, Saved Msgs or Drafts.

Important: Your service provider will charge

you for each message segment.

2. Scroll to the message you wish to erase.

When you start a message, the maximum

character limit appears once you are in the

message entry field. This number counts down as

you enter characters, until it reaches 0.

3. Select Options > Erase.

4. You will see a notification. Select Yes to erase

the message.

Note: You can erase a scheduled message

from the Outbox, but you cannot cancel

delivery of the message.

If you continue to enter text after this counter

reaches 0, a message segment may be appended.

When you reach the message size limit, you are

prompted to edit the message or alerted that the

message is being appended.

Erase all messages

1. Select Menu > Messaging > Erase Msg >

Inbox, Outbox, Sent Msgs, Saved Msgs,

Drafts or All. To erase messages from all

folders, select All.

Note: Not available on all phones. Check with

your service provider.

2. You will see a notification. Select Yes to

erase the messages.

Erase messages

Incoming calls while creating

messages

If you receive a call while composing a message,

you will receive a notification. You can do

the following:

The scheduled message will be sent at

the scheduled time. You cannot cancel

delivery of the message.

The message was sent. You cannot

cancel delivery of the message.

•

Select Ignore to not answer the call. You will

return to the message screen.

The message has been received.

•

Press the Send key to answer the call. The

message is saved to the Drafts folder.

The message has been sent to more

than one recipient.

Complete messages in Drafts folder

To continue composing a message in the

Drafts folder:

View failed or pending messages

Failed or pending messages are stored in your

Outbox. To view messages in the Outbox, select

Menu > Messaging > Outbox.

1. Select Menu > Messaging > Drafts.

2. Select the message you wish to complete.

3. Select Edit.

Your list of failed or pending messages will

appear with the following symbols.

4. Complete your message.

5. Select Send.

The message is pending and will be

sent when possible. You can cancel

delivery of the message.

View sent messages

To view messages in the Sent Messages folder,

select Menu > Messaging > Sent Msgs.

The message cannot be sent because

service is not available. An alert

appears on your phone if the message

cannot be sent.

Your list of sent messages will appear with the

following symbols.

User Guide

Edit Quick Text

Message settings

Your phone comes with prewritten (Quick Text)

messages, such as “Please call me,” which you

can insert into the body of a text message. You

can edit these messages or create new ones. Your

phone stores up to 40 Preset Text messages, with

up to 100 characters per message.

Message settings configure your phone for voice,

text, multimedia messages.

Alerts

Choose your alerts for voicemail, pages,

or messages.

1. Select Menu > Messaging > Msg Settings >

Edit Quick Text and do one of the following:

1. Select Menu > Messaging > Msg Settings >

Alerts > Msg Alert, Page Alert, or

Voice Alert.

–

Scroll to a Preset Text message and

select Edit.

2. Select an alert.

–

Select New Msg to create a new Preset

Text message.

Note: If you select an alert with an & Remind, the

phone notifies you once when a new message is

received and then notify you again every five

minutes. To stop a reminder alert, select Ignore.

2. Enter or edit the text.

3. Select Save.

Note: You can also save a message you have

written or received as Preset Text.

Signature

The signature you create is included at the end of

all outgoing messages and is counted as

characters in your messages; however, it does not

appear in the message creation screen.

Callback number

Set a callback number to let recipients know a

number where they can call you back.

1. Enter number in the text field.

1. Select Menu > Messaging >

2. Select OK to save the number.

Msg Settings > Signature.

2. Enter your signature in the text field.

Save to sent

You can save your outgoing messages.

3. Select OK to save the signature.

Note: The characters in the signature

are included in the total character count of

the message.

Select Menu > Messaging > Msg Settings >

Save to Sent and one of the following:

•

Disabled does not save outgoing messages.

Enabled saves all outgoing messages to the

Sent folder.

Message settings

Auto-erase

Voicemail number

You can set your phone to erase message

automatically when memory is needed for

incoming messages.

Set the number your phone calls to

retrieve voicemail. Often your voicemail

number is automatically programmed by

your service provider.

Select Menu > Messaging > Msg Settings >

Auto-Erase and one of the following:

1. Select Menu > Messaging > Msg Settings >

Voicemail Number.

•

Disabled erases no messages.

Inbox Msgs erases old messages in your

Inbox when memory is needed.

2. Select Edit.

3. Enter the voicemail number. Use Options >

•

Sent Msgs erases old messages in your Sent

folder when memory is needed.

Both erases old messages in both your Inbox

and Sent folder when memory is needed.

Time Pause or Hard Pause to enter pauses.

4. Select Save.

Erase recent list

Clears recent list of message recipients from

your phone. Select Menu > Messaging >

Msg Settings > Erase Recent List > Yes.

Default text

You can change the entry mode entry mode when

creating a text message. This setting applies only

to the message body screen, not the “To” screen.

Message groups

Select Menu > Messaging > Msg Settings >

Default Text and one of the following:

You can create groups for messaging. Select

Menu > Messaging > Message Groups to access

your groups. For more information, see “Contact

groups” on page 28.

•

Normal Alpha enters text letter by letter.

Rapid mode enters text with word

recognition.

Text message receipts

Request a notification when a recipient has

received a text or multimedia message.

Select Menu > Messaging > Msg Settings >

Text Msg Receipt and one of the following:

•

Don’t Request to not request a notification.

Request to request a notification.

User Guide

Contacts

Use your phone’s contacts directory to store

information about a person or company. Each

contact entry can have up to six phone numbers,

two email addresses, two Web addresses, two

street addresses, and a space for notes.

Add contacts

Add contact from home screen

To add a contact to your contacts directory:

1. From the home screen, enter a phone

number to save (include the area code).

2. Select Save > Save New Contact.

3. Enter a name for the contact. For more

information, see “Text Entry” on page 13.

4. Enter additional phone numbers, email

addresses, Web addresses and note, if

needed. Scroll up or down to move through

the contact fields.

View contacts directory

To view existing contacts in your phone, select

Menu > Contacts > View All. Your contacts

directory is listed alphabetically.

Tip: You can also select Contacts from the home

screen to view the directory.

Highlight a contact and do one of the following:

5. When you are done entering information,

select Save.

•

Press the Send key to call the

highlighted contact.

•

Press the OK key to view the highlighted

contact’s details.

Select New to add a new contact.

Select Options and choose one of

the following:

Add contact from contacts menu

To add a contact to your contacts directory:

1. Select Menu > Contacts > Add New.

2. Enter a name for the contact. When you

are done scroll down to the next field.

For more information, see “Text Entry” on

page 13.

3. Enter a primary number for the contact.

4. Enter additional phone numbers, email

addresses, Web addresses and note, if

needed. Scroll up or down to move through

the contact fields.

•

–

Call the contact.

Send Text Msg sends a text message.

View Contact views contact details.

Edit Contact edits the contact.

Erase Contact deletes the contact.

Send as vCard sends contact as a vCard.

Send All sends all contacts to a Bluetooth

device or a connected printer.

Contacts Menu accesses the

contact menu.

5. When you are done entering information,

select Save.

–

View contacts directory

Add code or extension

Customize a name

When you save the phone number of an

automated service, you may include a pause to

stop dialing. For example, a pause where you

would wait to dial an extension.

To customize the name of an existing contact.

1. Select Contacts.

2. At the contacts directory, select a contact.

3. At the contact details screen, scroll to the

contact name.

1. From the home screen, enter a

phone number.

4. Select Options and one of the following:

2. Select Options and a type of pause:

–

Ringer assigns a specific ringer to

the contact.

Msg Tone assigns a specific message

tone to the contact.

Picture assigns a specific picture to

the contact.

Erase Contact deletes the contact. This

will erase the entire contact.

Send as vCard sends the contact as

a vCard.

–

Time Pause causes the phone to stop

dialing for two seconds.

–

Hard Pause causes the phone to stop

dialing until you select Release while

making the call.

3. Enter the remaining numbers and

select Save > Save New Contact.

4. Complete the contact and select Save.

Customize contacts

Customize a number

To customize the number of an existing contact.

1. Select Contacts.

2. At the contacts directory, select a contact.

3. At the contact details screen, scroll

to a number.

Edit contact details

To edit details of an existing contact.

1. Select Contacts.

2. At the contacts directory, select a contact.

3. At the contact details screen, select Edit.

4. Select Options and one of the following:

–

Call the contact.

4. Edit or add phone numbers, email

addresses, Web addresses and notes.

Scroll up or down to move through the

contact fields.

Send Text Msg sends a text message.

Prepend displays the contact details

screen for you to change the number

(adding an area code) or other data

of the contact.

5. When you are done entering information,

select Save.

User Guide

–

Add Speed Dial adds the number to your

speed dial list.

View Number displays the number.

Erase Number deletes number from

the contact.

Secret / Not Secret makes the

number secret. It will not appear on

the screen until the lock code is

entered. Secret numbers can be

called without a lock code.

Primary Number makes this number the

primary number for the contact.

Send as vCard sends the contact as

a vCard.

–

Erase Address deletes email address

from the contact.

–

Secret / Not Secret makes the email

address secret. It will not appear on the

screen until the lock code is entered.

Send as vCard sends the contact as

a vCard.

–

Customize a Web address

To customize the Web address of an

existing contact.

–

1. Select Contacts.

2. At the contacts directory, select a contact.

3. At the contact details screen, scroll to a

Add To Group adds the number to the

business, personal or custom group.

Web address.

4. Select Options and one of the following:

–

Launch Web launches the Web browser

and goes to Web address.

View Web displays the Web address.

Erase Web deletes Web address from

the contact.

Customize an email address

To customize the email address of an

existing contact.

–

1. Select Contacts.

2. At the contacts directory, select a contact.

–

Send as vCard sends the contact as

a vCard.

3. At the contact details screen, scroll to a

contact email address.

Customize a street address

4. Select Options and one of the following:

To customize the street address of an

existing contact.

–

Send Text Msg sends a text message.

View Address displays the

1. Select Contacts.

email address.

–

Add To Group adds the email address to

the business, personal or custom group.

2. At the contacts directory, select a contact.

Customize contacts

3. At the contact details screen, scroll to a

4. Select Options > Ringer > Assign Ringer

and a ringer from the list. Scroll to play

the ringers.

street address.

4. Select Options and one of the following:

–

View Address displays the

street address.

Erase Address deletes street address

from the contact.

Send as vCard sends the contact as

a vCard.

Assign picture to a contact

To assign a picture to a contact.

1. Select Contacts.

2. At the contacts directory, select a contact.

3. At the contact details screen, scroll to the

contact name.

Customize a note

4. Select Options > Picture >

Assign Picture > Saved Images or

Caller IDs.

To customize the note of an existing contact.

1. Select Contacts.

2. At the contacts directory, select a contact.

3. At the contact details screen, scroll to a note.

4. Select Options and one of the following:

5. Scroll to an image and select Assign.

Assign number type

–

View Note displays the note.

Erase Note deletes the note from

the contact.

When you assign a number type, an icon is placed

in front of the contact number to specify the type

of number it is.

–

Secret / Not Secret makes the note

secret. It will not appear on the screen

until the lock code is entered.

Send as vCard sends the contact as

a vCard.

1. Select Contacts.

2. At the contacts directory, select a contact.

3. At the contact details screen, select Edit.

4. Press down twice to scroll to the number

type dropdown and press the OK key.

Assign ringer to a contact

To assign a ringer to a contact.

1. Select Contacts.

5. Select General, Work, Home, Mobile,

Pager or Fax. The appropriate icon will

appear next to the number in your

phone lists.

2. At the contacts directory, select a contact.

6. Select Save.

3. At the contact details screen, scroll to the

contact name.

User Guide

Send a vCard

Use a group

To send contact information as a message:

1. Select Menu > Contacts > Groups.

2. At the groups list, scroll to a group.

3. Select Options and one of the following:

1. Select Contacts.

2. At the contacts directory, select a contact.

–

View displays the group details.

Edit adds or removes members.

Erase deletes the group.

Send Text Msg sends a text message.

Send as vCard sends the group as

a vCard.

3. Select Options > Send as vCard and one of

the following:

–

via Bluetooth

To Printer

4. Complete the appropriate task to send

contact information.

–

Create Msg Group creates a

message group

Contact groups

You can assign your contacts to groups.

Your phone comes with two default groups,

Business and Personal. You can also create

your own groups.

Customize a group

1. Select Menu > Contacts > Groups.

2. At the groups list, select a group.

3. Select Options and one of the following:

Create a group

1. Select Menu > Contacts > Groups.

–

Mark None unchecks any checked

contacts in the group.

2. Select New.

–

Ringer assigns a ringer to the group.

Msg Tone assigns a message tone to

the group.

Picture assigns a picture to the group.

Erase deletes the group.

3. Enter a name for the group, then select Next.

4. Select contacts from the list provided. A

check mark appears next to each selection

you make. You can also remove checkmarks.

–

5. When you have chosen your contacts,

Edit edits the group.

select Done.

Your new group appears the next time you view

your groups.

Contact groups

Voice search

Search contacts

You can use voice commands to find a contact in

your voice dial list. For more information, see

“Find contacts” on page 57.

To find a phone number or contact, you can

search the contacts directory, check the Frequent

List, or use Fast Find.

Contacts directory

To search your contacts directory, select Menu >

Contacts and one of the following:

Delete all contacts

You can delete all your contacts.

Select Menu > Contacts > Erase Contacts

and one of the following:

•

View All lists the entire contacts directory.

Groups lists existing groups.

Speed Dial List or Voice Dial List shows

contacts on the specified list.

•

Contacts Only deletes all contacts from

the phone.

•

Groups Only deletes groups you have

created from the phone. This does not

delete the contacts.

You can also use the Contacts shortcut from

the home screen to view the contacts directory.

To quickly get down the list, enter the first letter

of the contact. You will skip to that letter of

the alphabet.

•

Erase All deletes both contacts and groups

from the phone.

Note: Deleted information can not be recovered.

Frequent list

Contacts count

With Frequent List enabled, you can see 15 of

your most frequently called contacts. For more

information, see “Frequent list” on page 45

Check how many contacts you have stored.

Select Menu > Contacts > Contacts Count.

Fast find

With Fast Find enabled, you can press one or two

keys to view close matches of the number. For

more information, see “Fast find” on page 45.

User Guide

Browser

You can use your phone to browse the Internet if

you have obtained phone Internet services from

your service provider and if over-the-air Internet

access is available in your area.

5. When you have finished using the browser,

press the End key to exit.

Use browser options

You can configure your browser.

Note: You cannot receive incoming calls while

you are using the browser.

During an active browser session, select Options

and one of the following:

Launch browser

•

Display Mode selects how the Web page is

display. Normal Screen configures the

content to fit on the screen. Wide Screen does

not fit the content to the screen.

1. Select Menu > Browser. A message

about airtime fees appears every time you

start the browser. For more information

about how airtime is charged, contact

your service provider.

•

Add to Bookmarks saves the current page as

a bookmark for easy access.

Bookmarks opens a list of your

2. Select OK to continue. If this is the first time

you have connected to the Internet, a

message informs you that security is not yet

enabled for your browser.

saved bookmarks.

Save Items on this Page allows you to save

content from the current page to your phone.

Search opens the browser search page.

Send URL sends the URL of the current page

with a text message.

3. Select Yes to enable security. When you are

connected, a browser home page appears. It

has a list of bookmarks and some browser

menu options at the bottom of the screen.

The lock icon appears in a secure session.

An underline and an arrow indicate that

there is more text. Scroll down to view more

text. Press the Back key to return to the

previous screen.

•

Go to URL... allows you to enter the URL of a

new page and go there.

•

History displays the pages you have visited.

Refresh reloads the current page.

Quit exits the browser.

More... gives you options for changing how

information is displayed.

4. To choose a site, scroll to the link and Press

the OK key.

Launch browser

–

Show URL displays the entire URL of the

current page.

Restart Browser relaunches the browser.

Clear IDs and Passwords clears

the browser cache of user names

and passwords.

Certificates... displays certificates used in

the current browser session.

Preferences allows you to change the

home page and other browser settings.

About displays information about your

browser session.

Check browser alerts

Alerts received from a Web site are sent to

your Browser Alerts folder. To check them,

do the following:

–

1. Select Menu > Messaging >

Browser Alerts. This action launches

the browser inbox.

–

2. Select OK to accept browser fees.

3. Select an alert and follow the prompts.

Set Web alert

You can set a prompt to confirm the start or

exit of the browser. For more information, see

“Web alert” on page 53.

Search for a Web site

How you search for a Web site depends on your

service provider. For more information, contact

your service provider.

Use a bookmark

1. Select Menu > Browser.

2. Select OK to accept browser fees.

3. From your Web home page, select

Options > Bookmarks. A list of

bookmarks appears.

4. Select a bookmark.

User Guide

Downloads

Your Kyocera phone has the added ability

to download and manage applications

through BREW.

Download an application

1. Select Menu > Downloads >

MobileShop > Catalog.

BREW brings you the full range of applications

and services you have come to expect from the

Internet: Email and instant messaging, real-time

navigation services, group chat, games, relevant

news, and much more.

When a connection is made, a list of

application types appears.

2. Select an application type. A list of

applications appears. Long titles scroll left as

you highlight them.

For more information about BREW

capabilities and application pricing, contact

your service provider.

3. Select an application. A list of usages

appears. There may be one or more

usages available. Prices are specified

for each usage.

How does BREW work?

4. Select a usage for the application. You are

You connect to the server, download applications,

and then manage them as you like. When you

choose an application, you have the option of

choosing a demo, various limited use options, or

the full version—all varying in price. If you

choose a demo, BREW lets you know when it has

expired. If you choose a priced version, the

amount is added to your phone bill. BREW also

lets you know if you’re running out of memory. At

that point, you can either disable an application

or remove it completely.

prompted to confirm your purchase.

5. Select Yes to confirm. The application

downloads to your phone. Download

times may vary.

To open the application now, select Yes. If you

select No, you return to the Games & Apps menu,

where you see a link to your new application.

Note: Your connection to the application server

automatically ends after 30 seconds, unless you

connect again to download more apps. If you

want to end the connection manually, press the

End key on your phone.

Once applications are loaded, you can update to

newer versions as they become available.

How does BREW work?

Open an application

Disable an application

Downloaded applications are stored under

the Games & Apps menu. Each application

comes with its own unique icon, to help you

identify it easily.

If you are running out of memory and would like

to download more applications, but do not want

to completely remove those you have paid for, you

can simply disable them. This means you have to

re-download an application in order to use it

again, but don’t have to pay for it again.

From the home screen, select Menu >

Downloads and the application.

1. Select Menu > Downloads > Settings >

Note: The Games & Apps icon always

remains at the top of this menu.

Manage Apps.

Downloaded applications are listed after.

2. Select an application.

3. Select Lock App. At the prompt, select Yes

View application details

to confirm.

You can get information about the size of

an application and how many uses it has left

before it runs out.

Note: The application is listed in the Games &

Apps menu. The icon looks like an empty box.

1. Select Menu > Downloads > Settings >

Check available memory

The amount of memory depends on the number

of applications you download.

Manage Apps.

2. Select an application to view its details.

Select Menu > Downloads > Settings >

Manage Apps > System Info.

Remove an application

If you remove an application, it is removed

completely from your phone. If you want to use it

again, you must pay for it again. If you want to free

up space on your phone, we recommend you

disable the application.

The amount of memory left is shown.

1. Select Menu > Downloads > Settings >

Manage Apps.

2. Select an application.

3. Select Remove. At the prompt, select Yes

to confirm.

User Guide

10 Tools

Your phone comes with tools and games. Some of

the games or tools described here may not be

available on your phone. If you receive and

incoming call while you are playing a game, the

game is paused and exited. You can return to play

once the call alert ends. Games do not remain

paused if the phone is turned off or loses power.

3. Select Play to play the memo or select

Options and one of the following:

–

Send creates a text message with the

memo attached.

–

Erase deletes the memo.

Assign assigns the memo as the

default ringer, contact ringer,

contact message tone, group ringer,

or group message tone.

Voice memo

The Voice Memo tool allows you to record and

play back audio memos.

–

Lock / Unlock prevents accidental

erasing of the memo.

–

Rename renames the memo.

Details displays the details of the file.

Erase All deletes all memos stored.

Record voice memos

To record new voice memos, do the following:

1. Select Menu > Tools > Voice Memo >

Record New.

Scheduler

2. Say your voice memo. Select Stop when you

The Scheduler allows you to schedule events and

set reminder alerts.

are done.

3. Select Save to save your memo.

Note: This feature only works if digital

If an incoming call is received while you are

recording a memo, the memo is saved and the

incoming call screen appears.

service is available.

Create an event

1. Select Menu > Tools > Scheduler >

Review voice memos

To play and use voice memos, do the following:

Add New Event.

2. Enter a name. Scroll down to move to the

1. Select Menu > Tools > Voice Memo >

next field when done.

Recorded Memos.

3. Choose an event type. Press the OK key and

2. At the file list, highlight a file.

select a choice from the list.

Voice memo

4. Modify the date, if needed. Press the OK key

10. Enable silent mode, if needed. Press the OK

key and select Off to leave on normal sounds

or During Event to place phone in silent

mode during the duration of the event.

to change the date.

–

Scroll left or right to move between

month, day and year fields.

Scroll up or down to change month, day

and year.

–

11. Make the event recurring, if need. Press the

OK key and select a choice from the list.

Press the OK key to save date and move to

12. Select Save to save the event.

the next field.

View events

You can view the events saved to the scheduler.

5. Modify the time, if needed. Press the OK key

to change the time.

–

Scroll left or right to move between hour,

minute and AM/PM fields.

Scroll up or down to change hour,

minute and AM/PM.

View by date

1. Select Menu > Tools > Scheduler and one

–

of the following:

–

View Month displays the current month.

Days with events are highlighted. Scroll

through the calendar. Press the OK key

to select a date.

Press the OK key to save time and move to

the next field.

6. Modify the duration of event, if needed. Press

the OK key to change the duration.

–

View Day displays the current date.

Scroll right or left to move to

another date.

Go to Date chooses a specific date.

Scroll left or right to move between

month, day and year fields. Scroll up or

down to change month, day and year.

Press the OK key to select the date.

–

Scroll left or right to move between hour

and minute fields.

–

Scroll up or down to change hour

and minute.

Press the OK key to save duration and move

to the next field.

7. Choose a priority. Press the OK key and

2. At the day view, do one of the following:

select a choice from the list.

–

Select an existing event to view the

event detail.

Scroll to a time and select Add New to

create a new event.

8. Choose a reminder time. Press the OK key

and select a choice from the list.

–

9. Choose a reminder sound. Press the OK key

and select a choice from the list.

User Guide

–

Select Options > Go to Today to go

the current date.

Select Options > Go to Date to go a

specific date.

Select Options > Erase Today’s Events

to delete all events for that date.

•

Erase deletes the event.

Send creates a message containing the event.

Copy creates an event with the existing event

information.

Scheduler settings

You can change the default settings of

your scheduler.

View by list

1. Select Menu > Tools > Scheduler >

Select Menu > Tools > Scheduler > Settings

and one the following:

View All Events.

2. At the event list, select one of the following:

•

Scheduler Hours changes the work day.

Auto Erase deletes events automatically.

Priority prioritizes new events.

Reminder assigns reminders for new events.

Reminder Sound assigns sound alerts for

new event reminders.

–

Scroll to an event and select View to

display the event detail.

Select Options > Sort by Time to sort

events by time.

Select Options > Sort by Type to sort

events by type.

Select Options > Sort by Priority to sort

events by priority.

Select Options > Erase All Events to

delete all events.

Select Options > Erase All Past Events

to delete all events that have already

occurred.

•

Silent Mode sets phone to silent mode for

new events.

Alarm clock

You can set up to four alerts with your phone’s

three alarm clocks and one quick alarm.

Note: The alert occurs only if the phone is on.

Note: This feature only works if digital service

is available.

Modify an event

You can modify existing events.

Set an alarm

1. Select Menu > Tools > Alarm Clock.

From the event detail screen, you can select OK to

return to the previous screen or Options and one

the following:

2. Scroll to one of the alarms and select Set.

•

Edit edits the event.

Alarm clock

3. Modify the time, if needed. Press the OK key

2. Enter the amount of your bill and

to change the time.

select Next.

–

Scroll left or right to move between hour,

minute and AM/PM fields.

3. Select the percentage amount to tip. The new

bill amount is shown.

–

Scroll up or down to change hour,

minute and AM/PM.

4. Select Done to return to menu or Split to

split the bill.

Press the OK key to save time and move to

the next field.

To split the bill enter number of guests and

select Next. The new bill amount with splits

is shown. Select Done to return to menu.

4. Choose a sound. Press the OK key and select

a choice from the list.

Calculator

The Calculator can perform basic

mathematical operations.

5. Make the alarm recurring, if needed. Press

the OK key and select a choice from the list.

6. Enter a note. Press the OK key.

1. Select Menu > Tools > Calculator.

2. Enter the first number.

7. Select Save to set the alarm.

When the alarm rings, select Stop to turn off the

alarm or Snooze to silence the for 10 minutes.

3. Select a mathematical operation:

–

Scroll left to multiply

Scroll right to divide

Scroll up to add

Tip: Opening the flip turns off the alarm.

Set the quick alarm

1. Select Menu > Tools > Alarm Clock.

Scroll down to subtract

2. Highlight the quick alarm and select Set.

The chosen operation is highlighted.

3. Choose a time. A notification shows the quick

4. Enter the second number. Press the OK

key to perform the operation. The result

is shown.

alarm is on.

When the quick alarm rings, select Off to turn off

the alarm or Reset to set the quick alarm again.

5. Select Exit to return to menu or Options and

one of the following:

Tip calculator

–

MS stores the currently displayed value in

memory.

The Tip Calculator helps you calculate how much

tip to include with a bill.

–

M+ adds displayed result to the value

stored in memory.

1. Select Menu > Tools > Tip Calculator.

User Guide

–

MR displays currently stored value on

the screen.

MC clears value currently stored

in memory.

–

Stop pauses counting.

Reset clears the stopwatch.

Press the Back key to return to the menu.

World clock

The world clock lets you check times in cities

around the world in relation to local time.

Timer

The Timer counts down for the specified time.

It beeps when that amount of time has elapsed.

Set world clock

1. Select Menu > Tools > Timer > Set.

1. Select Menu > Tools > World Clock.

2. Enter the time length.

The world clock menu is displayed. Your

local time and date is on the first line,

followed by your selected world city and that

city’s time and date.

–

Scroll left or right to move between

hours, minutes and seconds fields.

Scroll up or down to change hours,

minutes and seconds.

–

2. When you first access World Clock, scroll left

3. If needed, select Sound and one of the

or right to select a time zone.

sounds to change the sound.

The world clock menu is displayed again, with the

new time zone.

4. To work the timer, select the

following options:

–

Start begins the countdown.

Stop pauses the countdown.

Reset clears the timer.

Search world clock

From the world clock menu, you can search by

city or country.

When the countdown is complete select Off to

silence the alarm.

1. Select Menu > Tools > World Clock >

Options > Search City or Search Country.

2. In the search field, enter letter(s) to search

Stopwatch

by. Results are listed as you type.

The Stopwatch counts time for you.

3. Select a city or country from the list.

1. Select Menu > Tools > Stopwatch.

2. To work the stopwatch, select the

following options:

–

Start begins counting.

Timer

11 Media Gallery

Your phone stores images, sounds and videos and

can display those files on the phone’s screen.

3. Depending on which list you are in, the

displayed options change:

•

If you are viewing Saved Images, select

Access folders

To access the folders where your phone stores

media files, select Menu > Media Gallery and

one of the following:

View to view the image or select Options

and one of the following:

- Send sends the image via Bluetooth.

- Assign assigns the image as a Caller

ID, wallpaper, or screensaver.

•

Images contains image files that are

preloaded, downloaded, saved or created.

Sounds contains sound files that are

preloaded, downloaded, saved or created.

Delete All allows you to delete media files.

- Details displays details of the file.

- Erase All deletes all images stored.

•

If you are viewing Wallpapers or

Screensavers, select View to view the image

or select Options and one of the following:

Browse images

- Set Default assigns the image as the

phone’s wallpaper or screensaver.

To browse the images folder:

1. Select Menu > Media Gallery > Images and

- Details displays details of the file.

one of the following:

- Erase All deletes all images stored.

–

Saved Images displays images available.

Wallpapers displays wallpaper available.

Screensavers displays

•

If you are viewing Caller IDs, select View

to view the image or select Options and one

of the following:

screensavers available.

- Assign assigns the image as a

Caller ID.

–

Caller IDs displays the IDs you have

assigned to pictures and images.

- Details displays details of the file.

2. At the file list, scroll to an image.

User Guide

- Record New records a new

voice memo.

Browse sounds

To browse the Sounds folder:

- Erase deletes the memo.

- Assign assigns the sound as the

default ringer, contact ringer,

contact message tone, group ringer,

or group message tone.

- Lock / Unlock prevents accidental

erasing of the memo.

- Rename renames the sound.

- Details displays details of the file.

- Erase All deletes all sounds stored.

1. Select Menu > Media Gallery > Sounds and

one of the following:

–

Saved Sounds displays sounds available.

Ringers displays ringers available.

Voice Memos contains voice memos you

have made.

2. At the file list, scroll to a file.

3. Depending on which list you are in, the

displayed options change:

•

If you are in the Saved Sounds list, select

Send to send the file via Bluetooth or select

Options and one of the following:

- Assign assigns the sound as the default

ringer, contact ringer, contact

Delete all files

You can delete your unlocked media files.

Select Menu > Media Gallery > Delete All

and one of the following:

message tone, group ringer, or group

message tone.

- Details displays details of the file.

- Erase All deletes all sounds stored.

•

Images Only deletes all images from

the phone.

Sounds Only deletes all sounds from

the phone.

Delete All deletes all media files from

the phone.

•

If you are in the Ringers menu, select

Assign to assign the ringer as the default

ringer, contact ringer, contact message tone,

group ringer, or group message tone; or

select Options and one of the following:

- Details displays details of the file.

Note: Deleted information can not be recovered.

Playback tools

When you playback voice memos, use the

Navigation key to select the playback tools

displayed on the screen.

- Erase All deletes all sounds stored.

•

If you are in the Voice Memos list, select

Play to play the memo, or select Options

and one of the following:

- Send allows you to send the file

via Bluetooth.

Browse sounds

12 Settings

Menu options

The contents of the Settings menu are as follows:

Bluetooth

On/Off

My Devices

Settings

Display

Voice Features

Automatic Add

Expert Mode

Display Results

Digit Lengths

Voice Answer

Voice Wake-Up

Voice Training

Network

Data Calls

Set Wallpaper

Set Screensaver

Themes

Main Menu View

My Banner

Backlighting

Brightness

Contrast

Privacy Alert

Voice Privacy

Roam/Svc Alert

Roam Option

Set Phone Line

Location

Convenience

Airplane Mode

Auto-Hyphen

1-Touch Dialing

Hold Call

Fast Find

Frequent List

Minute Alert

Web Alert

Roam Call Alert

Accessories

Headset Sounds

Auto-Answer

TTY Device

Time/Date Format

Language

Security

Lock Phone

Sounds

Missed Call Alert

Open to Answer

Any Key Answer

Ringers

Ringer Mode

Volume

Flip Sounds

Pwr On/Off

Keypad

Com Port Speed

Hearing Aid

Limit Calls

ICE Numbers

Erase Contacts

New Lock Code

Note: Some features are not available on all phones. Check with your service provider.

User Guide

Pairing

Bluetooth

You must first “pair” your phone with the

Bluetooth device to allow your phone to

communicate with it. Refer to the instructions

for setting up Bluetooth (below) in conjunction

with the user guide provided with your

Bluetooth device.

The Bluetooth wireless technology on

your phone enables wireless connectivity

with accessories such as portable or

installed hands-free car kits, headsets,

handsets, computers, PC cards and adapters,

PDAs, and speakers. Not available on all phones.

For details check with your service provider. You

must use a Bluetooth device (compatible with

Class 2 Bluetooth wireless technology,

1. Select Menu > Settings > Bluetooth >

On/Off > On Visible or On Invisible.

2. Prepare the Bluetooth device or accessory

for pairing as described in the other device’s

user guide.

version 1.2) in order to use this phone wirelessly.

Bluetooth accessories are noted with a symbol.

3. Select Menu > Settings > Bluetooth >

Turn Bluetooth on

You must turn on your phone’s Bluetooth feature

to use it with Bluetooth devices.

My Devices > Find New.

4. Your phone will search and detect visible

Bluetooth devices in the vicinity.

Select Menu > Settings > Bluetooth > On/Off

and one of the following:

5. At the device list, highlight a device

and select Add.

•

On Visible allows other devices to find

your phone.

When pairing is initiated from another

Bluetooth device, you will be prompted to

accept or reject the pairing.

On Invisible hides your phone for all devices

except those listed in your My Devices.

Off prohibits your phone from being used

with any Bluetooth wireless technology device.

To prolong battery life, it is recommended to

turn Bluetooth off when you are not using it.

6. If necessary, enter the password provided

in the Bluetooth device’s user guide and

select OK.

Your phone waits for the device’s response.

If the password is accepted the device is

added to My Devices.

When you turn Bluetooth on the first time, you

will be prompted to do a device search. You can

immediately pair with a device.

Bluetooth

–

Delete removes the device from

your phone if you are no longer going

to use it.

Services displays a description of the

device (such as Headset, Handsfree,

Object Push, and Serial Port).

Security sets connection options

(Always Ask or Always Connect).

Using Bluetooth

Before you can use the Bluetooth functions of

your phone, you must set your phone to be

ready to communicate with a device. This is

called “connecting.”

Connect to a device

To connect your phone to an audio

Bluetooth device:

1. Select Menu > Settings > Bluetooth >

My Devices.

2. At the device list, highlight a device and

select Connect.

Bluetooth settings

You have settings for how your phone interacts

with Bluetooth devices. Select Menu > Settings >

Bluetooth > Settings and one of the following:

•

My Name changes the name of your phone to

identify to other devices it is paired with.

Visible Duration sets the time your phone

remains visible to other devices.

Services shows the list of the Bluetooth

protocol supported by your phone.

OBEX Authentication enables or disables

OBEX authentication.

A notification appears confirming the connection.

You can now use the device with your phone.

Disconnect from a device

To disconnect your phone from an audio

Bluetooth device:

1. Select Menu > Settings > Bluetooth >

My Devices.

2. At the device list, highlight a device and

select Disconnect.

Convenience

Your phone has several settings that may make

your phone more convenient to use.

Device list options

You can change or review the information about

each device you paired with your phone.

1. Select Menu > Settings > Bluetooth >

My Devices.

2. At the device list, highlight a device, select

Options and one of the following:

Airplane mode

While in an airplane, it is normally required that

you turn off your mobile phone because it emits

RF signals that interfere with air traffic control. In

Airplane mode, however, your phone will not emit

RF signals.

–

Rename renames the device.

User Guide

You cannot make or receive calls, send text

messages, use the browser, or Bluetooth, but you

can play games, use the Scheduler, set the clock,

and make emergency calls to designated

emergency numbers. Please check with

uniformed personnel before operating your

phone in Airplane mode. To set your phone to

Airplane mode, select Menu > Settings >

Convenience > Airplane Mode > Enabled >

OK. If you turn on Airplane mode, you can also

set the time and date manually.

Press the OK key to save time and move to

the next field.

4. Select Done.

Auto-hyphen

Auto-hyphenation, when enabled, automatically

inserts hyphens into your phone numbers to be

consistent with the U.S. dialing plan. For example,

1-222-333-4444. To turn on, select Menu >

Settings > My Phone > Auto-Hyphen >

Enabled.

Set date and time

1-Touch dialing

While in Airplane Mode, your phone does not

keep time automatically. You can set the time

and date manually.

1. Select Menu > Settings > Convenience >

Set Time/Date.

The 1-Touch Dialing feature is the fastest way

to call a speed dial location. To call a contact

with speed dial, press and hold the speed

dialing location.

Note: If it is a two-digit location, press the first

digit briefly, then press and hold the second digit.

2. At the Date field, modify the date. Press the

OK key to change the date.

To use 1-Touch dialing, you must enable 1-Touch

dialing on your phone and have a speed dial

location assigned to a contact. To enable 1-touch

dialing, select Menu > Settings > My Phone >

1-Touch Dialing > Enabled.

–

Scroll left or right to move between

month, day and year fields.

Scroll up or down to change month, day

and year.

–

Press the OK key to save date and move to

the next field.

Hold calls

3. At the Time field, modify the time. Press the

OK key to change the time.

The Hold Call feature allows you to place

incoming calls on hold until you are ready to

answer them.

–

Scroll left or right to move between hour,

minute and AM/PM fields.

Note: The Hold Call feature will not work if the

Open to Answer feature is enabled. See “Open to

answer” on page 46.

–

Scroll up or down to change hour,

minute and AM/PM.

Convenience

Enable hold call feature

Change the hold message

1. Select Menu > Settings > Convenience >

Hold Call > Enabled.

Hold Call > Re-Record Msg.

If you have not recorded a hold message, you

will be prompted to record one, such as

“Please hold. I’ll answer in a minute.”

2. Select Record to record the message,

as prompted.

3. Select OK to record the message a second

2. Select Record to record the message,

time, as prompted.

as prompted.

The new hold message is now activated.

3. Select OK to record the message a second

Fast find

time, as prompted.

With Fast Find enabled, you can press one or two

keys to view close matches of the number you are

looking for.

The hold message is now activated. The next time

a call comes in, you will have the option of

placing it on hold.

1. From the home screen, press the keys

corresponding to the letters of the name you

want to find. A matching contact or speed

dial entry appears.

Place a call on hold

You can place a call on hold once you have

enabled this feature.

Note: If you are already on a call and you receive

another call, you cannot place the incoming call

on hold. It will go to voicemail.

2. Scroll to the contact you want and press the

Send key to call the number.

To enable Fast Find, select Menu > Settings >

Convenience > Fast Find > Enabled.

When a call comes in, do the following:

1. Select Options > Hold Call. The caller will

be placed on hold and will hear your

recorded hold message.

Frequent list

From the home screen, select Contacts. The last

15 of your most frequently called contacts appear

when the Frequent List is enabled. Scroll past the

double line to view the entire contacts directory.

2. Select Answer to speak to the caller on hold

or End Call to hang up without speaking.

To enable Frequent List, select Menu >

Settings > Convenience > Frequent List >

Enabled.

User Guide

Minute alert

Display

Your phone can alert with a short beep ten

seconds before each minute passes during a call.

Select Menu > Settings > Convenience >

Minute Alert > Enabled.

Wallpaper

You can select a wallpaper for your phone’s

home screen.Select Menu > Settings >

Display > Set Wallpaper and one of the

following options:

Missed call alert

•

Saved Images selects from saved images.

Wallpapers selects a preloaded wallpaper.

None turns off wallpaper.

Choose your alert missed calls.

1. Select Menu > Messaging > Msg Settings >

Alerts > Missed Call Alert.

2. Select an alert.

Screensaver

Note: If you select an alert with an & Remind, the

phone notifies you once when a new message is

received and then notify you again every five

minutes. To stop a reminder alert, select Ignore.

Screensavers appear on the home screen when

the flip is open or closed. A screensaver activates

10 seconds after the last keypress. Incoming calls

and alerts override the screensavers.

Select Menu > Settings > Display >

Set Screensaver and one of the following options:

Open to answer

Open to answer allows you to answer a call by

opening the flip. Select Menu > Settings >

Convenience > Open to Answer > Enabled.

•

Saved Images selects from saved images.

Screensavers selects a preloaded

screensaver.

Any key answer

•

None turns off screensaver.

Set your phone to answer a call when press any

key. Select Menu > Settings > Convenience >

Any Key Answer > Enabled.

Themes

You can select a color theme for the display

background of your phone.

1. Select Menu > Settings > Display >

Themes.

2. Select a color theme. As you scroll down the

list you will preview the themes.

Display

•

7 seconds (default), 10 seconds,

15 seconds, or 30 seconds turns

backlighting on for the set time after

your last keypress.

Always Bright leaves backlighting on

whenever the phone is open.

Main menu view

Display menus in various formats. Select Menu >

Settings > Display > Main Menu View and one

of the following:

•

Grid displays icons of each menu item, with

its name at the bottom of the screen.

List displays a list of each menu item.

•

Brightness

Change the brightness of the display.

The next time you select Menu from the home

screen, you see the menu style you selected.

1. Select Menu > Settings > Display >

Brightness.

My banner

2. Scroll to change the brightness.

The banner is the personal label for your phone.

It appears on the home screen above the time and

date. To change your banner:

3. Press the OK key to save.

Contrast

Change the brightness of the display.

1. Select Menu > Settings > Display >

My Banner.

1. Select Menu > Settings > Display >

2. Select Edit and press the Back key to clear

Contrast.

the current banner.

2. Scroll to change the brightness.

3. Enter your new text and select Save.

3. Press the OK key to save.

Backlighting

Time and date format

Your screen lights up while you are in a call or

when you press a key on the keypad. The

backlight automatically turns off when the phone

is inactive. You can set the length of time the

bright backlighting remains on. Select Menu >

Settings > Display > Backlighting and one of

the following:

Your phone can display different time and date

formats. Select Menu > Settings > Display >

Time/Date Format and a format.

Language

Your phone can display alternative languages.

Select Menu > Settings > Display > Language

and a language.

•

Always Dim turns backlighting off.

User Guide

•

Vibrate Only vibrates for the duration of the

incoming call or other alerts.

Vibe then Ring vibrates for the first 10

seconds and then rings for the remainder of

the incoming call alert.

Sounds

Your phone has several settings that control the

sound. You can pick from a variety of ringers as

well as control the volume.

•

Lights Only lights up for the duration of the

incoming call or other alerts.

Ringers

You can change the ringer for your phone. You

can also assign ringers for different tasks.

You can also press and hold the # Space key to go

back forth from Vibrate Only mode to Normal

Sounds mode.

Ringer types

Your phone has multiple ringers you can choose

to use for all incoming calls.

1. Select Menu > Settings > Sounds >

Ringers > Ringer Type.

2. Select a ringer. As you scroll down the list

you will hear the ringers.

Note: The phone will ring when it is attached to

an external power source (such as a charger),

even if all sounds have been silenced.

Volume

Control the volume of your phone’s features.

Volume controls

Roam ringer

Control the volume of the phone’s ringer,

speakerphone, earpiece and keypad.

1. Select Menu > Settings > Sounds >

Volume > Ringer Volume,

Spkrphone Volume, Earpiece Volume,

or Key Volume.

2. Scroll right to increase the volume or left to

decrease the volume.

Your phone can alert you to roaming calls with a

specific ringer. Select Menu > Settings >

Sounds > Ringers > Roam Ringer > Enabled.

Ringer mode

Your phone is set to make sounds when you

receive calls, press keys, navigate through menus,

and receive alerts (such as new messages). You

can silence all sounds and set the phone to vibrate

or light up when you receive calls and alerts.

Select Menu > Settings > Sounds >

3. Press the OK key to save.

Smart volume

To automatically adjust the volume during a call,

based on surrounding noise levels, select Menu >

Settings > Sounds > Volume > Smart Sound >

Enabled.

Ringer Mode and one of the following:

•

Normal Sounds rings for the incoming

call or alert (in effect, returns phone to a

non-silent mode).

Sounds

Flip sounds

Assign specific sounds for when your phone flip

opens or closes.

Voice features

Following features allow you to customize the

voice commands.

1. Select Menu > Settings > Sounds >

Automatic add

Flip Sounds > Flip Open or Flip Close.

You can set the phone to automatically add a

contact to your voice dial list when you create

a new contact. Select Menu > Settings >

Voice Features > Automatic Add > Enabled.

2. Select a sound. As you scroll down the list

you will hear the sounds.

Power on/off sound

You can set your phone to play a sound when

powering on and off.

Expert mode

When expert mode is enabled, instead of

speaking a command following the initial

voice prompts, you can speak the command

after you hear a tone. Select Menu > Settings >

Voice Features > Expert Mode and one of

the following:

1. Select Menu > Settings > Sounds >

Pwr On/Off Sound.

2. Select Enabled to activate the power on/off

sounds or Disabled to deactivate the power

on/off sounds.

•

Normal sets phone to default voice prompts.

Expert sets phone to sound tones instead of

voice prompts.

Keypad

Control the keypad tones of the phone.

Key sound

Display results

To choose the sounds the keys make when

pressed, select Menu > Settings > Sounds >

Keypad > Key Sound > Tone, Click or Off.

You can set the phone to display up to three

recognition contacts when calling or searching

for a contact with voice commands. Select

Menu > Settings > Voice Features >

Key length

Display Results > Single Best or Three Best.

To control the length of the keypad tones, select

Menu > Settings > Sounds > Keypad >

Key Length > Normal or Long.

User Guide

Digit lengths

Voice wake-up

You can set the number of digits used for a phone

number in your voice dial list.

You can set your phone to make a call using

a headset.

Select Menu > Settings > Voice Features >

Digit Lengths and one of the following:

Enable voice wake-up

Select Menu > Settings > Voice Features >

Voice Wake-Up > With Accessory.

•

North American allows 7, 10, and 1 +

10 digits in a phone number.

Permit All allows 4-14 digits in a

phone number.

Use voice wake-up

To wake up the phone:

•

1. Say “Wake Up” and listen for a tone.

Voice answer

You can set your phone to answer a call

automatically when using a headset.

2. Say “Wake Up” again until you hear

two tones.

If the phone does not recognize your Wake Up

command, see “Voice training” on page 50.

Enable voice answer

Select Menu > Settings > Voice Features >

Voice Answer > With Accessory. To use the voice

answer feature, you must disable the Auto-Answer

feature (see “Auto-answer” on page 51) and set

the phone to normal sounds (see “Ringer mode”

on page 48).

Voice training

If your phone is having trouble recognizing

your voice, you can train by speaking

number commands.

1. Select Menu > Settings > Voice Features >

Voice Training.

Use voice answer

2. Read the message and select OK.

3. Select Train Numbers.

When you receive an incoming call, the phone

prompts you with a voice recording. If the caller

is recognized as a contact entry in your phone,

then the phone prompts “Incoming call from

(Name), answer?” Say “Yes” or press any key

except the End key to answer. Say “No” and press

the End key to silence the alert. Remain silent.

The voice alert repeats twice and the phone rings

once, then returns to the home screen.

4. Read the message and select OK.

5. Follow the prompts displayed on the

screen. Speak each number until training

is complete.

To untrain your phone select Menu > Settings >

Voice Features > Voice Training > OK >

Untrain Numbers.

Voice features

Com port speed

Accessories

This section describes settings that affect

accessories you use with your phone.

This sets the speed of the communications port

for data and TTY transmission. Select Menu >

Settings > Accessories > Com Port Speed >

19.2 kbps, 115.2 kbps, 230.4 kbps, or Other.

Headset sounds

When a headset is attached to your phone, the

ringer can be played through the headset or

phone speaker. Select Menu > Settings >

Accessories > Headset Sounds and one of

the following:

Hearing aid

You can use your phone with a T-coil hearing aid

device. Select Menu > Settings > Accessories >

Hearing Aid > OK > Enabled.

•

Out of phone rings from the phone speaker.

Out of headset rings from the headset.

Note: Enable hearing aid feature only when using

the phone with a T-coil hearing aid device.

Auto-answer

Network

When a headset is attached to your phone, the

phone can be set to answer automatically. To turn

auto answer on, Select Menu > Settings >

Accessories > Auto-Answer > After 5 Seconds.

It will automatically answer after 5 seconds.

Data calls

Your phone may be able to receive certain data,

depending on the system sending the information.

You cannot receive voice calls while the phone is

in data mode. To receive data, you must connect

the phone to a laptop or PC and switch the phone

from voice mode to data mode.

TTY device

You can connect the phone to a teletype (TTY)

device for the hearing impaired.

Note: Enable TTY only when using the phone with

a TTY device.

Note: To purchase a cable, visit

www.kyocera-wireless.com/store.

1. Connect the TTY device to the phone.

2. Select Menu > Settings > Accessories >

TTY Device.

3. At the notification, select OK.

4. Select TTY On to connect or TTY Off to

not connect.

To enable data mode, select Menu > Settings >

Network > Data Calls and of the following:

•

Voice Only turns data mode off.

Data, next call sets the phone to data

mode for the next incoming call or the

next ten minutes.

•

Data, until off sets the phone to data mode

until the phone is turned off.

Tip: You can also enable TTY when you enter

##889 with your keypad and select TTY.

User Guide

Privacy alert

Roam option

You set your phone to alert you when

enhanced digital CDMA privacy is lost or

regained. Select Menu > Settings > Network >

Privacy Alert > Enabled.

You can restrict your phone from making a call

when roaming. Select Menu > Settings >

Network > Roam Option > Automatic

(allows roaming) or No Roaming

(disallows roaming).

Voice privacy

Set phone line

Set your phone to use enhanced digital CDMA

privacy. Select Menu > Settings > Network >

Voice Privacy > Enhanced.

Your phone can have two service accounts, or

phone lines, associated with it. Each phone line

has its own phone number. Select Menu >

Settings > Network > Set Phone Line and a

phone line. When you are using one line, you

cannot receive calls from the other. It would be as

if the phone were “off” for that number.

Roaming service alert

Use this setting if you want the phone to alert

you when you roam outside of your home

service area. Select Menu > Settings >

Network > Roam/Svc Alert and one of

the following:

Your voicemail, however, will still take messages.

All contacts and settings are shared for both lines.

•

Disabled turns roaming service alert off.

When no svc alerts you with three tones

decreasing in pitch when service is lost and

three tones increasing in pitch when service is

acquired again.

On roam change alerts you with two

decreasing tones when roaming service is

acquired and three increasing tones when

home area service is acquired again.

On any change alerts you with three

increasing tones if there is a change in

roaming service or three decreasing tones if

the phone loses service.

Note: You must first establish a second phone

line with your service provider. Once established,

a second phone number becomes available in the

menu for selection.

Location

•

This setting allows you to share your location

information with network services other than

emergency services (for example, 911, 111, 999

and 000) in markets where service has been

implemented. This feature works only when your

phone is in digital mode. You do have the option

of turning off the locator to emergency services.

Select Menu > Settings > Network > Location

and one of the following:

Network

•

911 Only (default) shares your position

information only with emergency services

when you call your 3-digit emergency code.

Location On shares your position

information, in addition to

Security

This section describes all the features involved in

securing your phone and preventing access to

personal information. All security features are

shielded by a four-digit lock code.

emergency services.

Lock phone

Web alert

You can set an alert to confirm the start or exit of

the browser. Select Menu > Settings >

When your phone is locked, you can call only

emergency numbers or your service provider’s

customer service number. You can still receive

incoming calls.

Network > Web Alert and one of the following:

•

At Start prompts when you start a session.

At End prompts when you end a session.

Both prompts when you start and end

a session.

1. Select Menu > Settings > Security.

2. Enter your four-digit lock code.

3. Select Lock Phone and one of the following:

–

Never leaves the phone always unlocked.

On power up locks the phone every time

you turn it on.

•

No Prompts for no prompts.

Roam call alert

–

Now locks the phone immediately.

You can set the phone to warn you before you

answer or place a call while roaming. Select

Menu > Settings > Network >

Do the following to unlock the phone:

1. From the home screen, select Unlock.

2. Enter your four-digit lock code.

Roam Call Alert > Call Prompt.

The phone emits a distinctive ring to indicate

when you are roaming during a call. To accept or

place a call while roaming, you must press 1.

Limit calls

You can limit the calls that can be made from

your phone to emergency numbers, your

contacts, and your service provider’s numbers.

Note: Call prompt is disabled when the phone is

in Emergency Mode.

1. Select Menu > Settings > Security.

2. Enter your four-digit lock code.

User Guide

3. Select Limit Calls and one of the following:

3. Select Erase Contacts and one of

the following:

–

No Limit does not limit calls.

Limit Outgoing limits outgoing calls.

Incoming calls can be answered.

Limit All limits both incoming and

outgoing calls.

–

No exits without erasing contacts.

Yes erases all contacts. A confirmation

prompt appears to verify your decision.

–

4. Select Yes to confirm.

ICE numbers

New lock code

The ICE (in case of emergency) numbers

feature allows you to specify three personal

phone numbers that can be called when the

phone is locked.

Change your lock code from the default provided

by the service provider. The lock code is typically

0000 or the last 4 digits of your phone number.

1. Select Menu > Settings > Security.

2. Enter your four-digit lock code.

3. Select New Lock Code.

1. Select Menu > Settings > Security.

2. Enter your four-digit lock code.

3. Select ICE Numbers.

4. A confirmation prompt appears. Select Yes.

5. Enter a new four-digit code.

6. Re-enter your new lock code.

The lock is now changed.

4. Select an Unassigned slot.

5. Enter the number and select Done.

You can view these numbers only when they’re

being entered for the first time.

To make a call to an ICE number from a locked

phone, you must dial the number (including area

code) exactly as it was stored in ICE numbers.

Erase contacts

You can erase all entries from your

Contacts directory.

1. Select Menu > Settings > Security.

2. Enter your four-digit lock code.

Security

13 Voice Commands

Voice commands allow you to call a contact, dial

a phone number, access menus, or find contact

information from your voice dial list.

Remove contacts

To remove a contact from your voice dial list:

1. Select Menu > Contacts > Voice Dial List.

Note: You cannot use voice recognition to end

a call; you must press the End key when the flip

is open.

2. At the contact list, highlight a check marked

contact and press the OK key. No check

mark appears next to a name when voice

dialing is inactive. Uncheck each name you

wish removed from voice dialing.

Voice dial list

To call or find a contact using voice dial you

must add the contact to your voice dial list.

The contact name must not have more than

three words or components in a contact name

for voice dialing recognition.

3. Select Save.

Voice commands

Start voice commands

1. From the home screen, press the Send key to

initiate voice commands. The phone

prompts, “Say a command”.

Add contacts

To add a contact to your voice dial list:

1. Select Menu > Contacts > Voice Dial List.

2. Say one of the following commands and

2. At the contact list, highlight a contact

and press the OK key. A check mark

appears next to a name when voice

dialing is active. Check each name you

wish use with voice dialing.

following the voice prompts.

–

“Contact <name>” call to a contact on

your voice dial list.

“Dial Number <number>” call by

speaking the digits of the phone number.

“<shortcut name>” sends you to a

menu item.

3. Select Save.

“Find Contact” allows you to find a

contact from your voice dial list.

User Guide

Call a contact

Call a number

1. If you haven’t already done so, add the

person you wish to call to the voice dial list.

See “Voice dial list” on page 55.

1. From the home screen, press the Send key.

The phone prompts, “Say a command”.

2. Say “Dial Number” and then speak the digits

of the number you want to call. If you pause,

the phone prompts you, “Did you say

2. From the home screen, press the Send key.

The phone prompts, “Say a command”.

<number>” or “Say a number” if it does not

recognize the name. Say “Yes” to make the

call, “No” to cancel the phone call.

3. Say “Contact” and then name of the person

you want to call.

The phone prompts, “Please repeat” or “Say

a name” if it does not recognize the name. If

the name you spoke matches a contact in the

Voice Dial List, the phone prompts: “Name,

correct?” Say “Yes” to make the call, “No” to

select a similar name, or “Cancel” to cancel

the phone call.

3. Press the End key to end the call.

Use shortcuts

1. From the home screen, press the Send key.

The phone prompts, “Say a command”.

2. Say the name of the menu item you want to

access or say “Shortcut” to view a list of

menu items. The phone prompts, “Say one of

the shortcuts”.

If the phone finds multiple voice tags that

sound like the name you said, the phone will

list the names, you will be asked to verify

which name you want to call. Say “Yes” when

you hear the correct name. Say “No” when

you hear an incorrect name.

3. Say the name of the menu item you want

to access.

Tip: Press and hold the Send key to access the

voice shortcuts list quickly.

4. Press the End key to end the call.

Voice commands

Find contacts

You can use voice commands to find contacts

listed in your voice dial list.

1. From the home screen, press the Send key.

The phone prompts, “Say a commands”.

2. Say “Find Contacts”. The phone prompts,

“Say a name”.

The phone prompts, “Please repeat” or “Say

a name” if it does not recognize the name. If

the name you spoke matches a contact in the

Voice Dial List, the phone prompts: “Name,

correct?” Say “Yes” to make the call, “No” to

select a similar name, or “Cancel” to cancel

the search.

Voice command settings

You can control settings for your phone’s voice

recognition feature. For more information, see:

•

“Automatic add” on page 49

“Expert mode” on page 49

“Display results” on page 49

“Digit lengths” on page 50

“Voice training” on page 50

User Guide

14 Getting Help

•

The name of your service provider.

The actual error message or problem you

are experiencing.

The steps you took to reproduce the problem.

The phone’s mobile equipment

identifier (MEID).

Customer support

Your service provider’s customer support

department may be accessible directly from your

phone when you dial a number, such as *611

(check with your service provider). They can

answer questions about your phone, phone bill,

call coverage area, and specific features available

to you, such as call forwarding or voicemail.

•

Note: To locate the MEID, select Menu >

Phone Info > Build Info and scroll down to

MEID for the 14-digit number. If your phone

uses an electronic service number (ESN),

ESN replaces MEID.

For questions about the phone features, refer to

the materials provided with your phone, or visit

www.kyocera-wireless.com.

For additional questions, you may contact the

Kyocera Wireless Corp. Customer Care Center in

any of the following ways:

Qualified service

If the problem with your phone persists, return

the phone with all accessories and packaging to

the dealer for qualified service.

•

Web site: www.kyocera-wireless.com.

Email: [email protected].

Phone: 1-800-349-4478 (U.S. and Canada) or

1-858-882-1401.

Phone accessories

To shop for phone accessories, visit

www.kyocera-wireless.com/store. You may

also call us at 800-349-4188 (U.S.A. only)

or 858-882-1410.

•

Customer support phone numbers are also

available in the following countries:

–

India: 1-600-121214 or 0124-284-5000

Puerto Rico: 1-866-664-6443

Before requesting support, please try to

reproduce and isolate the problem. When you

contact the Customer Care Center, be ready to

provide the following information:

Become a product evaluator

To participate in the testing and evaluation of

Kyocera Wireless Corp. products, including

cellular or PCS phones,

visit beta.kyocera-wireless.com.

Customer support

Index

Numerics

1-touch dialing, 44

disabling, 33

downloading, 32

opening, 33

calculator, 37

calendar, See scheduler

call history, See recent calls

call lists

removing, 33

accessories, 58

headsets, 51

settings, 51

auto-erase, 23

auto-hyphenation, 44

erasing, 16

viewing, 16

T-coil hearing aid, 51

call logs, see recent calls

call timers, 17

callback number, 22

text message, 19

callers IDs, 39

calls

TTY device, 51

activating Bluetooth, 42

adding

back key, 7

backlight, 47

backlight duration, 47

banner, 47

Bluetooth devices, 42

codes, 25

contacts, 24

battery

caring, 2

answering, 8

extensions, 25

voice dial list, 49, 55

airplane mode, 43

set date/time, 44

alarm clock, 36

alerts

charging, 1

call lists, 16

installing, 1

data, 51

recharging, 1

Bluetooth, 42

adding devices, 42

connecting, 43

disconnecting, 43

pairing, 42

emergency, 11

ending, 9

fax, 51

holding, 44

browser, 31, 53

limiting, 53

messages, 22

making, 8

minute, 46

phone name, 43

settings, 43

turning on, 42

bookmarks, 31

BREW, 32

roaming, 11

pages, 22

silencing, 10

privacy, 52

voice commands, 56

capitalization, 14

CDMA privacy, 52

changing modes, text entry, 14

color

roaming calls, 53

roaming service, 52

vibrating, 48

brightness, 47

browser, 30

alerts, 31, 53

launching, 30

options, 30

voicemail, 22

answering calls, 8

any key, 46

themes, 46

com port speed, 51

connecting Bluetooth devices, 43

contacts, 24

any key answer, 46

appended messages, 20

applications

searching, 31

adding, 24

details, 33

User Guide

dialing

1-touch, 44

speed, 10

voice list, 55

directory, contacts, 24

disconnecting, devices, 43

display

adding to a group, 26

assign message tone, 25

assign number type, 27

assign picture, 25, 27

assign ringer, 25, 27

calling numbers, 25

customizing, 25

delete all, 29

all contacts, 29

all media files, 40

contacts, 54

multimedia messages, 20

text messages, 20

evaluation, product, 58

banner, 47

fast find, 45

faxes, 51

brightness, 47

color themes, 46

contrast, 47

directory, 24

editing, 24, 25

email addresses, 26

erase, 25

erasing, 24, 26, 54

fast find, 45

frequent list, 45

groups, 28

memory, 29

notes, 27

primary number, 26

searching, 29

secret, 26, 27

send as vCard, 24, 25, 28

sending text message, 25

speed dial list, 26

street addresses, 26

viewing all, 24

voice search, 57

web addresses, 26

flip

answering calls, 46

sounds, 49

folders

language, 47

main menu, 47

screensavers, 46

settings, 46

draft, 21

images, 39

inbox, 19

media gallery, 39

outbox, 21

sent, 21

time/date format, 47

wallpapers, 46

download applications, 32

downloading

applications, 32

games, 32

drafts folder, 21

sounds, 40

frequent list, 45

gallery, media, 39

games, 34

downloading, 32

groups, 28

earpiece, 8

volume, 48

editing contacts, 25

email addresses, 26

emergency

calls, 11

numbers, 54

end key, 7

entering

assign message tone, 28

assign picture, 28

assign ringer, 28

creating, 28

erase, 28

sending text message, 28

using, 28

contrast, 47

convenience settings, 43

conventions, using this guide, 7

countdown timer, 38

customer support, 58

customizing contacts, 25

letters, 13

numbers, 13

symbols, 14

text, 15

data

headsets

auto answer, 51

erasing

calls, 51

media files

delete all, 40

media gallery, 39

memory, 33

menus

sounds, 51

voice answer, 50

voice wake-up, 50

basic, 7

key, 7

shortcuts, 7

network

help, getting, 58

hold calls, 44

location information, 52

set phone line, 52

main, 6

main view, 47

settings, 41

messages

network settings, 51

icons, 5

notes, contacts, 27

text message, 19

notifications

images

browsing, 39

saved, 39

inbox, 19

alerts, 22

appended, 20

auto-erase incoming, 23

callback number, 22

completing, 21

failed, 21

incoming calls, 21

pending, 21

preset text, 22

saved, 22

sent, 21

settings, 22

text messages, 19

ok key, 7

open to answer, 46

outbox, 21

outgoing calls, 16

incoming calls, 16

Internet, 30

keypad

key tone length, 49

sounds, 49

volume, 48

pages alerts, 22

pairing, 42

phone

keys

answering calls, 8

Bluetooth name, 43

codes, 25

extensions, 25

icons, 5

keys, 7

frequently used, 4, 7

tone length, 49

tones, 49

signature, 22

text entry mode, 23

text messages, 18

unable to send, 20

minute alerts, 46

language, 47

left softkey, 7

lights only alerts, 48

limiting calls, 53

location information, 52

lock code, 54

locking

making calls, 8

overview, 3

missed calls, 16

deal with, 16

modes

setting line, 52

turning on and off, 8

pictures

assigning, 39

playback tools, 40

power

on and off sounds, 49

prepend, 25

preset text, 22

airplane, 43

expert, voice, 49

ringers, 48

text entry, 13

multimedia messages

erasing, 20

phone, 53

text messages, 20

main menu, 6, 47

making calls, 8

navigation

User Guide

primary number, 26

privacy alerts, 52

fast find, 45

erasing, 40

flip closed, 49

flip open, 49

keypad, 49

frequent list, 45

voice commands, 57

world clock, 38

quick alarm, 37

security

locking, 40

emergency numbers, 54

erasing contacts, 54

limiting calls, 53

lock code, 54

locking phone, 53

settings, 53

playback tools, 40

power on and off, 49

ringers, 48

saved, 40

settings, 48

silence all, 48

volume, 48

rapid entry, 13

receipt request

multimedia messages, 23

text message, 19

text messages, 23

recent calls, 16

erase all, 23

redialing, 8

replying

text messages, 19

sent folder, 21, 22

set priority

text message, 19

settings

accessories, 51

speakerphone, 9, 10

volume, 48

speed

dialing, 10

restrict roaming, 52

right softkey, 7

ringers, 40, 48

mode, 48

alarm clock, 36

Bluetooth, 43

convenience, 43

date and time, 44

display, 46

menu, 41

messages, 22

network, 51

quick alarm, 37

scheduler, 36

security, 53

sounds, 48

voice commands, 49, 57

world clock, 38

stopwatch, 38

support, customer, 58

symbols, 14

roam, 48

T-coil hearing aid, 51

teletype, 51

text entry, 13

silent mode, 48

type, 48

volume, 48

capitalization, 14

changing modes, 14

current mode, 13

default mode, 23

letters, 13

roaming

call alerts, 53

restrict, 52

service alerts, 52

numbers, 13

scheduler, 34

creating events, 34

modifying events, 36

settings, 36

viewing events, 35

screensavers, 39, 46

searching

quick reference, 15

rapid entry, 13

text entry mode, changing, 23

text messages

shortcuts

navigation key, 7

signature, 22

silent mode, 48

smart sound, 48

sounds

callback number, 19

creating, 18

erasing, 20

forwarding, 19

browsing, 40

contacts directory, 29

voice

icon, 19

wallpapers, 39, 46

web

answer, 50

dial list, 55

memos, 40

privacy, 52

training, 50

wake-up, 50

locking, 20

notification, 19

options, 18

preset text, 18

replying, 19

request receipt, 19, 23

retrieving, 19

saving, 19

send later, 19

sender information, 20

set priority, 19

validity period, 19

viewing, 19

addresses, 26

alerts, 53

browser, 30

web addresses, contacts, 26

world clock, 38

searching, 38

voice commands, 55

calling contacts, 56

calling numbers, 56

display results, 49

expert mode, 49

find contacts, 57

settings, 49

shortcuts, 56

training, 50

time calls, 46

timer, 38

tip calculator, 37

tools, 34

voice dialing

activating, 9

adding contacts, 55

automated lists, 49

digit lengths, 50

removing contacts, 55

voice memos, 34

erasing, 34

alarm clock, 36

calculator, 37

scheduler, 34

stopwatch, 38

timer, 38

tip calculator, 37

voice memo, 34

world clock, 38

TTY device, 51

turning on and off, 8

locking, 34

playing, 34

recording, 34

voicemail, 11

alerts, 22

number, 23

using

volume, 48

groups, 28

adjusting, 10

earpiece, 48

validity period

text message, 19

vibrating call alerts, 48

viewing contacts, 24

keypad, 48

ringers, 48

smart sound, 48

speakerphone, 48

User Guide

Kyocera Wireless Corp.

www.kyocera-wirele s s .com

82-K8216-1EN, Rev. 001

KVH Industries Satellite TV System LF User Manual
Lenoxx Electronics Telephone PH 5562 User Manual
Link electronic DVR PCR 8200 User Manual
Linksys Network Router WRT54GX4 User Manual
Magnavox Cassette Player VRX562AT99 User Manual
Makita Flat Panel Television 43901D User Manual
Mars Air Systems Air Compressor L 2254 User Manual
Martin Audio Portable Speaker C115 C115T User Manual
Meade Telescope 114 EQ ASB User Manual
M Systems Flash Disk Pioneers Computer Accessories 91 SR 005 10 7L User Manual