MODEL SC21CD5444UQH-4PK
SC21CD5444 / SHS-4QM Combo Pack
Connection: There are 3 connection methods for using the equipment provided with
your Combo pack:
Scenario #1: Connect the cameras to the System, not using the SHS Switcher
1 x SC21 Observation
System
STEP 1:
Connect the Cameras to the Observation System :
• Connect the Adaptor Cables to the Cameras
• Connect the Cameras to the CH1~4 DIN Inputs on the
back of the System.
NOTE:
You do not need the switcher in
this scenario.
4 x SHS-4QM Cameras with Adaptor Cables
MODEL SC21CD5444UQH-4PK
SC21CD5444 / SHS-4QM Combo Pack
Scenario #3: Connect the 4 Cameras to the Switcher, and connect the switcher to the
System. Purchase 3 additional Cameras for the other open Ports on the System.
1 x SC21 Observation
System
STEP 1:
• Connect the Cameras to the Switcher. Connect the adaptor to the switcher and plug into a wall outlet
STEP 2:
• Connect the switcher to the System on one of the BNC ports.
NOTE: You will need to purchase a separate BNC Adaptor to put the Switcher on the System
STEP 3:
•Set the Switcher to SEQUENCE Mode, so all 4 cameras will be displayed on One channel of the System.
Turn your system into a 16-camera Switching DVR (4 cameras per
channel) by purchasing 3 additional SG7221B-4PK at
|