SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
DANGER:
This product utilizes a Class 1 laser to read compact discs. This
laser Compact Disc Player is equipped with safety switches to
avoid exposure when the CD door is open and the safety interlocks
are defeated. Invisible and hazardous laser radiation when open
and interlock failed or defeated. Avoid direct exposure to beam.
Please do not attempt to defeat or bypass the safety switches.
1
SAFETY PRECAUTIONS (CONTINUED)
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an unauthorized
change or modification is made.
INFORMATION:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
2
SAFETY PRECAUTIONS (CONTINUED)
SURGE PROTECTORS:
It is recommended to use a surge protector for AC connection.
Lightning and power surges ARE NOT covered under warranty for
this product.
• Do not open the CD compartment while the CD is rotating.
• Always keep the CD compartment closed when not in use.
• Keep all foreign objects out of the CD compartment.
• Place the unit on a stable surface.
• Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat-radiating
appliances such as electric heaters.
• On top of other stereo equipment that radiate too much heat.
• Places lacking ventilation or dusty places.
• Places subject to constant vibration.
• Humid or moist places.
3
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start
of your musical enjoyment. Now it’s time to consider how you can maximize the fun
and excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting
your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association’s Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise. This list of sound levels
is included for your protection.
4
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
We
WantYou
LISTENING
ForALifetime
EIA
EST. 1924
5
LOCATION OF CONTROLS
11
12
13
1
2
3
4
5
6
14
15
7
16
8
9
10
1. PROG (Program) Button
2. EQ/NAVI (Navigation) Button
3. Stop (I)/Power Off Button
10. Hold Switch
11. DC 4.5V Jack (Side of Unit)
+
–
4. Skip/Search/Tuning Up (
) Button
12. LINE OUT Jack (Side of Unit)
13. CD Compartment
14. CD Door OPEN Switch
15. Display
5. Play/Pause (
6. Skip/Search/Tuning Down (
Button
7. MODE/Radio On Button
8. VOLUME/Radio Preset –/+ Buttons
9. Headphones Jack
)/Power On Button
)
16. Battery Compartment (Under CD
Compartment Door)
6
INSTALLATION
This CD player requires either two (2) “AA” cell standard batteries (not
included) or the AC adapter (not included).
BATTERY INSTALLATION
The low battery indicator (
display when batteries are low (when using battery
power) and need replacing.
+
–
) will light in the
+
–
1. Open the battery compartment door under the
CD compartment Door by pushing the latch in
and and then lifting it. To prevent the
possibility of losing the cover, it cannot be
removed.
–
–
+
+
2. Insert two (2) “AA” cell batteries (not included) according to the polarity
diagram inside the battery compartment. Alkaline batteries are
recommended for the longest playing time.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated
next to the battery compartment. Reversed batteries may cause damage to the
device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture. (Follow battery manufacturer’s directions.)
7
INSTALLATION (CONTINUED)
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not included) to an AC
outlet having 120V, 60Hz AC only. Plug the small end into the DC 4.5V jack on the
side of the unit and connect the other end into the AC outlet. The batteries are
automatically disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from the wall
outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet hands.
Fully insert the plug without exposing any part of the blade.
+
–
DC 4.5V
Sound Through a Home Audio System
By using a home audio connection cable (not included), superb sound can be
heard through your home audio system. Before making any connections, turn off
the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the side of
the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the
amplifier’s PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away from the TV
or turn off the power to this unit.
HOLD SWITCH
Slide the HOLD switch until “HOLD” appears in the display and no buttons can be
pressed. After three seconds, “HOLD” will disappear in the display. If you press any
button, “HOLD” will appear in the display again to indicate the button is disabled.
This is useful when jogging/walking. Slide the HOLD switch to the off position to
cancel the Hold function.
8
OPERATION
TO LISTEN TO THE RADIO
1
2
1
2
Plug the headphones into the Headphones jack.
Press the MODE/Radio On button to enter
the FM Radio mode. Press the MODE button
repeatedly to select STEREO or MONO. If
FM reception is weak/noisy, select Mono, in
this case the reception will be monaural.
Press the Play/Pause (
to turn the unit on. If
)/Power On button ‚
CD is in the CD
a
compartment, press the Stop (I)/Power Off
button once to stop playback, otherwise
ƒ
continue to step 2.
3
4
1
2
To adjust the volume, press and hold the
VOLUME/Radio Preset –/+ buttons for one
second; “VOLUME” will appear in the display.
Press and release the Skip/Search/Tuning
‚ or
ƒ button to tune a station; Within three seconds, press the VOLUME/Radio
Preset –/+ buttons to adjust the volume. If you do
“Manual” will appear in the display. For
rapid search tuning, press and hold the
Skip/Search/Tuning
button for one second, then release; “Auto
Seek” will appear in the display.
not press the VOLUME/Preset –/+ for one second
first, “PRESET” will appear in the display. If you
then press the VOLUME/Radio Preset –/+ buttons,
the Memory Preset will increase or decrease, not
the volume.
‚ or
ƒ
CONTINUED ON THE NEXT PAGE
9
OPERATION (CONTINUED)
5
6
To change back to the CD mode, press To turn the radio off, press the Stop
(I)/Power Off button.
the Play/Pause (
)/Power On button.
ANTENNAS
FM – The headphones act as an antenna for FM. Extend the headphone wire
for best FM reception.
AUTO SCAN
Press and hold the Skip/Search/Tuning
or
button for approximately 1
second and the unit will automatically search for the next available station.
10
OPERATION (CONTINUED)
TO SET AND RECEIVE A STATION INTO MEMORY
1
2
Within five seconds, repeatedly press and
release the VOLUME/Radio Preset –/+
buttons to select a Memory Preset (up to 30
memories).
Tune a desired station as described in
the previous section. Press the PROG
button; the memory number will blink
and PROG indicator will appear.
3
4
Press the PROG button again to confirm.
To receive a Memory Preset, press the
VOLUME/Radio Preset –/+ buttons until the
desired preset appears in the display.
11
OPERATION (CONTINUED)
TO INSERT AND PLAY A CD
This CD player is designed to play all kinds of Audio Discs and MP3 CD ROMS, such as CD
recordables and rewritables. Do not try to play CDI, CDV, DVD or computer CDs in this unit.
1
2
Press the Play/Pause (
)/Power On button
to turn the unit on; the total tracks (and folders,
if using MP3) will appear in the display. Then,
the unit will automatically start playing the CD;
the current track and elapsed playing time (CD
information and folder will also appear, if using
MP3) will appear in the display.
Open the CD compartment lid by sliding the
CD Door OPEN switch. Gently press a disc,
label side up, onto the spindle until it locks in
place. Close the CD compartment lid.
3
4
Adjust the EQ/NAVI button to cycle through
the EQ settings: FLAT, CLASSIC, JAZZ,
ROCK and POP.
Adjust the volume as desired using the
VOLUME/Radio Preset –/+ buttons.
CONTINUED ON THE NEXT PAGE
12
OPERATION (CONTINUED)
5
When the disc is through playing, it will
stop. Press the Stop (I)/Power Off button
to stop the disc before it is finished. Press
the Stop (I)/Power Off button again to turn
the unit off.
CD PLAYBACK NOTES:
• See page 20 for more information on MP3’s.
• When recording (“burning”) CDs, make sure the session is “finalized”, or simply record
(“burn”) only one session. You can find more information in your recorder’s manual.
• This unit is capable of playing standard CDs or 3” singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “no disc” will appear
in the display.
• If a disc is not recorded properly, a disc error will occur.
• Playback will stop when you open the CD compartment, but it is not recommended to
open the compartment before the Stop (I)/Power Off button is pressed.
• If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.
• It may take 10 to 30 seconds for the player to read an MP3 CD and begin playback,
depending on the number of tracks burned on the CD.
• The EQ function is only available for CD playback.
13
OPERATION (CONTINUED)
TO PAUSE A CD
2
1
During CD playback, if you wish to pause
the disc momentarily, press the Play/Pause
Press the Play/Pause (
button again to release pause and resume
)/Power On
(
)/Power On button. Playback will stop playback. The sound returns and the
but the disc continues to spin and “PAUSE” elapsed time in the display stops flashing.
will appear and the elapsed time will flash
in the display.
FORWARD/REVERSE SKIP TRACK
1
2
During playback, press and release the
During playback, press and release the
Skip/Search
the player to the beginning of the next track.
Press the Skip/Search button
repeatedly to advance the player to higher
number tracks.
button once to advance
Skip/Search
player back to the beginning of the currently
playing track. Press the Skip/Search
button repeatedly to move the player back
to lower numbered tracks.
button once to move the
14
OPERATION (CONTINUED)
HIGH-SPEED MUSIC SEARCH
During playback, depress and hold either
the Skip/Search ‚ or ƒ button to
move the player forward or backward within
track to locate specific musical
1
1
2
a
a
passage. The player will move forward or
backward at high speed as long as the
buttons are depressed. When you release
the Skip/Search
‚ or
ƒ button,
normal playback will resume.
REPEAT PLAYBACK OF ONE TRACK
1
2
2
3
To repeat a single track, press the MODE The specific track you selected will be
1
repeated continuously. To cancel Repeat
playback, press the MODE button until the
Mode indicator disappears.
button ‚ once while playing a CD; “
”
will appear in the display. Press the
Skip/Search ƒ or „ button to
select the specific track that you wish to
repeat.
15
OPERATION (CONTINUED)
REPEAT PLAYBACK OF ALL TRACKS
1
2
To repeat all the tracks on the CD, press All tracks on the disc will be repeated
continuously. To cancel Repeat playback,
press the MODE button until the Mode
indicator disappears.
the MODE button twice (three times if
playing an MP3) while playing a CD;
ALL
“
” will appear in the display.
REPEAT PLAYBACK OF A FOLDER/ALBUM (MP3 w/folders only)
2
1
To repeat all files in a folder/album (MP3 All files in the selected folder/album will be
CD only), press the MODE button twice repeated continuously. To cancel Repeat
ALBUM
playback, press the MODE button until the
Mode indicator disappears. See page 20 for
more info on MP3 format.
while playing a CD; “
the display.
” will appear in
16
OPERATION (CONTINUED)
INTRO PLAYBACK (Will play the first 10 seconds of each track)
1
2
1
2
Press the MODE button ‚ three times
(four times if playing an MP3) while playing
a CD; “INTRO” will blink in the display.
The first 10 seconds of all tracks on the disc
will be played in sequence. To cancel Intro
playback, press the MODE button until the
Mode indicator disappears.
Press the Skip/Search
ƒ button;
“INTRO” will light solid in the display.
TO RANDOMLY PLAY BACK A CD
1
2
To randomly playback the tracks on CD, The unit will play all the tracks in random
press the MODE button four times (five order. When all the tracks have been played,
times if playing an MP3) while playing a the unit will stop. To cancel Random
CD; “RAND” will blink in the display.
playback, press the MODE button until the
Mode indicator disappears.
17
OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 64 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be played.
1
2
1
2
3
If using an MP3, select the desired
While in the Stop mode, press the PROG
button. The track number will blink and “P-
01” will appear in the display. (If using an
MP3, the folder number will blink.)
folder using the Skip/Search
ƒ button. Press the PROG button „ to
confirm.
‚ or
3
4
1
2
Select a track to be programmed using
Press the PROG button to memorize
the track.
the Skip/Search
‚ or
ƒ button.
CONTINUED ON THE NEXT PAGE
18
OPERATION (CONTINUED)
5
6
1
2
Repeat steps 2 through 4 to program
additional tracks up to a maximum of 64
tracks.
Press the Play/Pause
button to begin program playback; “PROG”
will appear in the display.
(
)/Power On
NOTES ON PROGRAM PLAYBACK
•
•
•
•
Press the Stop (I)/Power Off button while in the Program mode or change the CD to
clear the memory.
The program memory will be saved, even if the power is turned off or if the CD door is
opened without changing the CD.
You can review the program by pressing the PROG button repeatedly while in the Stop
mode.
To add a track to the program memory, simply press the PROG button, and the display
will show the next available memory number, then continue as per the steps on the
previous page.
•
Press the Stop (I)/Power Off button to stop the program before it is finished (the
program memory will be kept).
•
•
Each file may be stored in the program memory as many times as desired (up to 64 files).
You can scroll through the program while it is playing using the Skip/Search
button.
or
19
OPERATION (CONTINUED)
RESUME
This unit has Auto resume, which will resume playback of the last
track listened to as well as the volume level last selected when the
unit is turned on (and the same CD is still in the CD compartment).
To cancel Auto Resume, you need to change the CD.
MP3 FAQs - Frequently Asked Questions
Please read before playing an MP3 CD.
Does the unit support packet write CD-RW?
Yes it can. You can add or delete MP3 files without
reformatting. It appears like a PC hard drive.
Can the unit read regular music CDs?
Yes, it can.
Does the unit have Electronic Skip Protection built-in?
Yes, it has an anti-shock buffer (45 seconds for standard CD and 120
seconds for MP3 CD). What that means for the everyday user is that
it can withstand road bumps, shaking, etc. There will be no skipping
when you jog, run on a treadmill or drive on a bumpy road.
20
OPERATION (CONTINUED)
Can I use the MP3 extension for non-audio data files?
No, this may result in serious malfunction and harmful noise
interference.
Does the unit support multi-session CDRs?
If the MP3 CD is not finalized, you can burn a new group of
MP3 files until the CD is full.
Does the unit support subdirectories (subfolders)?
Yes, the unit can read music files from subfolders.
What appears on the display when playing back MP3 CDs?
The album, title and artist (if set when MP3 was recorded).
21
OPERATION (CONTINUED)
SELECTING SONGS BY MP3 TITLE
You can search for a song by title as follows:
1
2
1
2
If the first letter of the title starts with a
letter above F, a number or a symbol, press
During MP3 playback, press and
hold the EQ/NAVI button for more than two
seconds; the File Search display will
appear.
and hold the Skip/Search
‚ or
ƒ
button until the desired letter range appears
in the display.
3
4
1
2
When the desired first letter appears, press
Select the first letter by pressing and
the Play/Pause (
)/Power On button to
releasing the Skip/Search
‚ or
select it. If there is a file that starts with that
letter, the name will appear in the display. If
not, “NO FILE” will appear in the display.
ƒ button.
CONTINUED ON THE NEXT PAGE
22
OPERATION (CONTINUED)
5
6
1
2
Repeat steps 2 through 4 until the desired
title appears in the display, or go to step 7.
If you make a mistake, simply press the
Stop (I)/Power Off button to delete the
last letter entered.
7
8
1
2
2
3
Press the MODE button ‚ to move the When the title appears, press the
cursor to the title.
Play/Pause (
)/Power On button ‚ to
start playback or press the Stop (I)/Power
If desired, press the Skip/Search
ƒ or
Off button ƒ to exit the File Search screen.
„ button to cycle through the titles
that start with the selected letter.
23
OPERATION (CONTINUED)
SEARCHING THROUGH MP3 FOLDERS
You can search the contents of the folders (if burned on CD) as follows:
1
2
1
2
During MP3 playback, press and hold
the EQ/NAVI button for more than two
seconds; the File Search display will
appear. Then, press the EQ/NAVI button
again.
Press the Skip/Search
‚ or
ƒ
button to cycle through the folders. The first
letter of the selected folder will blink and the
next folder will appear below it.
3
When the folder appears, press the
Play/Pause (
)/Power On button to start
playback of the tracks in the selected folder.
24
OPERATION (CONTINUED)
SINGLE SESSION
The following chart is an example of a Windows Explorer display
that will appear on your computer monitor for a single session
MP3 CD ROM with directories/albums. Check the added notes
to help you understand the MP3 CD unit display and the
playback sequence of directories/ albums and tracks on a single
session MP3 CD.
(E) CD-ROM drive
Directory 01
Skipped
Blur01.mp3
Blur02.mp3
Blur.jpg
Lyric.doc
Directory 02
Directory 04
Girl09.mp3
Girl10.mp3
Spice05.mp3
Spice06.mp3
Directory 03
2men07.mp3
Directory 05
Boyz11.mp3
Boyz12.mp3
Skipped
Directory 06
Bread13.mp3
Abba01.wav
Abba02.wav
Directory 07
Marx14.mp3
Twain15.mp3
25
OPERATION (CONTINUED)
MULTI SESSION
The computer user does not need to finalize the CDR disc as music
is burned on the CD. Because of this, the music can be downloaded
at different times until the whole CD is full.
NOTES ON THE CHART (PREVIOUS PAGE):
• The arrow pathway shows the sequence of MP3 directory
and file playback.
• This example has a total of 7 MP3 directories.
• Based on this layout, the first file will be “Blur01.mp3” and the last
file will be “Twain15.mp3”.
• “Skipped” denotes a directory which contains non-audio files only,
e.g. jpg, wav, etc. These cannot be detected nor played on this
player. When an album contains mixed format files, the non-MP3
files will be skipped.
26
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the compact disc carefully. Handle the compact compact disc only by its
edges. Never allow your fingers to come in contact with the shiny, unprinted side
of the compact compact disc.
•
•
Do not attach adhesive tape, stickers, etc. to the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never
use detergents or abrasive cleaners to clean the compact disc. If necessary,
use a CD cleaning kit.
•
•
If a compact disc skips or gets stuck on a section of the compact disc, it is
probably dirty or damaged (scratched).
When cleaning the compact disc, wipe in straight lines from the center of the
compact disc to the outer edge of the compact disc. Never wipe in circular
motions.
Z
27
CARE AND MAINTENANCE (CONTINUED)
•
•
Compact discs should be stored in their cases after each use to avoid
damage.
Do not expose compact discs to direct sunlight, high humidity, high
temperatures, or dust, etc. Prolonged exposure or extreme temperatures
can warp the compact disc.
•
Do not stick or write anything on either side of the compact disc. Sharp
writing instruments, or the ink may damage the surface.
Cleaning the unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power
source when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as
other furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
28
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before calling for service.
SYMPTOM
Unit will not
CAUSE
SOLUTION
Dead batteries, or not Replace batteries, and install
turn on.
installed properly.
AC adapter
not connected.
CD compartment
not closed.
properly.
Check AC adapter
connection.
Disc will not play.
Close CD compartment.
Disc inserted
incorrectly.
Dirty or defective
disc.
Reinsert disc correctly.
Try another disc.
Moisture
condensation
on disc.
Wipe disc with soft
cloth.
Erratic CD playback.
Dirty or defective
disc.
Clean or replace disc.
No sound from
headphones.
Headphone
plug not inserted
correctly.
Reinsert headphone
plug correctly.
VOLUME control
set to minimum.
Weak batteries.
Defective disc.
Station not tuned.
Increase volume.
Replace batteries.
Try another disc.
Retune station and extend
headphone wire.
FM distorted.
29
SPECIFICATIONS
Power requirement DC...................................................2 x AA (LR6) Alkaline batteries
Power requirement AC..........................................DC IN 4.5V Adapter, Center Positive
Disc Diameter..........................................................................................4.72” (120mm)
.................................................................................................3.15” (80mm) Single CD
Optical Source ..............................................................................Semiconductor Laser
D/A Conversion ......................................................1-bit DAC eight times oversampling
MPEG Rate..................................................................................................32-384Kbps
Sampling Frequency........................................................8/11.025/12KHz for MPEG2.5
.......................................................................................16/22.05/24KHz for MPEG2
.........................................................................................32/44.1/48KHz for MPEG1
MP3 Playback .....................................................................ISO9660 format compatible
Output level .................................................................Line Output 0.7Vms (47K ohms)
....................................................................................Headphone 14mW (16 ohms)
Frequency Range (FM) ............................................................................87.5–108MHz
Check the CD burner/recorder’s documentation to see if it complies with these
specifications.
Specifications are subject to change without notice.
30
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,
PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR TO MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL
AT 1-800-321-6993.
31
|