Car Radio CD USB SD Bluetooth
|
|
|
|
Toronto 420 BT
1 011 202 420 / 1 011 202 421
1 011 202 320 / 1 011 202 321
San Francisco 320
Operating and installation instructions
Contents
Safety notes ...................................................... 4
Symbols used.............................................................. 4
Road safety .................................................................. 4
General safety notes................................................. 4
Declaration of conformity ...................................... 5
Scanning all tracks ..................................................12
Playing tracks in random order ..........................13
Repeatedly playing individual tracks or
directories ..................................................................13
Configuring the display.........................................13
Browse mode ............................................................14
Searching by track names
(not in iPod mode) ..................................................15
Cleaning notes.................................................. 5
Disposal notes................................................... 5
Scope of delivery .............................................. 5
Optional equipment
(not part of the scope of delivery)....................... 5
Bluetooth®
(Toronto 420 BT only)..................................... 15
Bluetooth® menu.....................................................15
Pairing and connecting a device .......................16
Telephone functions...............................................17
Bluetooth® streaming mode................................20
Phone book functions ...........................................20
Placing the device in operation....................... 5
Attaching/detaching the control panel ............ 5
Display language (only Toronto 420 BT)........... 6
Setting the reception area ..................................... 6
Switching on/off ........................................................ 6
Volume .......................................................................... 6
Display brightness..................................................... 7
Switching demo mode on/off............................... 7
Additional functions in
the Bluetooth® menu.............................................21
External audio sources................................... 23
Front AUX-IN socket................................................23
Traffic information............................................ 7
Sound settings................................................ 23
Calling and exiting the "AUDIO" menu............23
Making settings in the "AUDIO" menu.............24
Setting the 3-band equaliser...............................25
Radio mode....................................................... 7
RDS.................................................................................. 7
Changing to radio mode or selecting
a memory bank .......................................................... 8
User settings ................................................... 26
Tuning into a station ................................................ 8
Storing stations or calling stored stations........ 8
Scanning stations...................................................... 8
Storing stations automatically (Travelstore).... 9
PTY.................................................................................. 9
Configuring the display.........................................10
Calling the user menu and selecting
a menu.........................................................................26
Making settings in the "TUNER" menu ............27
Making settings in the "DISPLAY" menu.........28
Making settings in the "VOLUME" menu ........29
Making settings in the "CLOCK" menu ............30
Making settings in the "VARIOUS" menu........30
CD/MP3/WMA/iPod mode.............................. 10
Basic information.....................................................10
Changing to CD/MP3/WMA/iPod mode.........11
Inserting/ejecting a CD .........................................11
Connecting/removing a USB data carrier.......11
Inserting/removing the memory card.............12
Selecting tracks........................................................12
Fast searching...........................................................12
Interrupting playback ............................................12
Factory settings .............................................. 31
Useful information ......................................... 32
Warranty .....................................................................32
Service .........................................................................32
Technical data ................................................. 32
Installation instructions ................................ 33
3
Safety notes
Road safety
Safety notes
Observe the following notes about road safety:
The car sound system was manufactured accord-
ing to the state of the art and established safety
guidelines. Even so, dangers may occur if you do
not observe the safety notes in these instructions.
•
Use your device in such a way that you can
always safely control your vehicle. In case of
doubt, stop at a suitable location and operate
your device while the vehicle is standing.
These instructions contain important informa-
tion to easily and safely install and operate the car
sound system.
•
•
Remove or attach the control panel only
while the vehicle is standing.
Always listen at a moderate volume to pro-
tect your hearing and to be able to hear acous-
tic warning signals (e.g. police sirens). During
mute phases (e.g. when changing the audio
source), changing the volume is not audible.
Do not increase the volume during this mute
phase.
•
•
•
Read these instructions carefully and com-
pletely before using the car sound system.
Keep the instructions at a location so that they
are always accessible to all users.
Always pass on the car sound system to third
parties together with these instructions.
In addition, observe the instructions of the devices
used in conjunction with this car sound system.
General safety notes
Observe the following notes to protect yourself
against injuries:
Symbols used
These instructions employ the following symbols:
•
•
Do not modify or open the device. The device
contains a Class 1 laser that can cause injuries
to your eyes.
Do not increase the volume during mute
phases, e.g. when changing the audio source.
Changing the volume is not audible during a
mute phase. Do not increase the volume dur-
ing mute phases, e.g. when changing the audio
source.
DANGER!
Warns about injuries
CAUTION!
Warns about damaging the CD drive
DANGER!
Warns about high volume
Use as directed
This car sound system is intended for installation
and operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN slot.
Observe the performance limits in the technical
data. Repairs and installation, if necessary, should
be performed by a specialist.
The CE mark confirms the compliance
with EU directives.
u
•
Identifies a sequencing step
Identifies a listing
Installation instructions
You may only install the car sound system your-
self if you are experienced in installing car sound
systems and are very familiar with the electrical
system of the vehicle. For this purpose, observe
the installation instructions at the end of these
instructions.
4
Safety notes | Cleaning notes | Disposal notes | Scope of delivery | Placing the device in operation
Declaration of conformity
Optional equipment
(not part of the scope of delivery)
The Blaupunkt AudioVision GmbH & Co. KG de-
clares that the car sound system San Francisco
320 complies with the basic requirements and
the other relevant regulations of the directive
2004/108/EEC and the car sound system Toronto
420 BT complies with the basic requirements and
the other relevant regulations of the directive
1999/5/EC.
Use only accessories approved by Blaupunkt.
Information is available from your Blaupunkt
specialised dealer or on the Internet under
Placing the device in operation
The declaration of conformity can be found on the
Caution!
Transport securing screws
Before the startup of the car sound system, ensure
that the transport securing screws are removed
(see the chapter "Installation instructions").
Cleaning notes
Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care product may
contain ingredients that will damage the surface
of the car sound system.
Attaching/detaching the control
panel
•
Use only a dry or slightly moistened cloth for
cleaning the car sound system.
The car sound system is equipped with a detach-
able control panel (release panel) to protect your
equipment against theft. In the delivery state, the
control panel is in the supplied case. To start oper-
ating the radio after installation, you must first at-
tach the control panel (see the section "Attaching
the control panel" in this chapter).
•
If necessary, clean the contacts of the control
panel regularly using a soft cloth moistened
with cleaning alcohol.
Disposal notes
Do not dispose of your old unit in the house-
Always take the control panel with you when leav-
ing the vehicle. The car sound system is worthless
to a thief without this control panel.
hold trash!
Use the return and collection systems available to
dispose of the old device.
Caution
Scope of delivery
Damage to the control panel
Never drop the control panel.
The scope of delivery includes:
1
1
1
1
1
Car sound system
Transport the control panel so that it is protected
against impacts and the contacts cannot become
dirty.
Operating/installation instructions
Case for the control panel
Support frame
Do not expose the control panel to direct sunlight
or another heat source.
Antenna connection adapter
Avoid direct skin contact with the control panel's
electrical contacts.
Extended scope of delivery
(for 1 011 202 321 / 1 011 202 421 only):
1
1
1
Handheld remote control (incl. battery)
Connecting cable chamber A
Connecting cable chamber B
5
Placing the device in operation
Attaching the control panel
Switching on/off
u
Push the control panel into the bracket at the
right edge of the device.
Switching on/off with the On/Off button
u
For switch-on, press the On/Off button
3.
u
Push the control panel carefully into the left
bracket until it clicks into place.
The car sound system switches on.
u
To switch off the device, press and hold down
the On/Off button
onds.
Removing the control panel
3
for longer than 2 sec-
u
Press the
panel.
button
1
to unlock the control
The car sound system switches off.
The left side of the control panel detaches
from the device and is secured by the bracket
against falling out.
Note:
If you switch on the car sound system while
the vehicle ignition is switched off, it auto-
matically switches off after 1 hour to preserve
the vehicle battery.
u
u
Move the control panel slightly to the left until
it disengages from the right bracket.
Carefully remove the control panel from the
left bracket.
Switching on/off via vehicle ignition
The car sound system will switch off/on simulta-
neously with the ignition if the device is correctly
connected to the vehicle's ignition as shown in the
installation instructions and you did not switch
Note:
The car sound system automatically switches
off as soon as the control panel is removed.
the device off by pressing the On/Off button
3.
Display language
(only Toronto 420 BT)
For the Toronto 420 BT, you can define whether the
language for messages on the display is English or
German. The setting is performed in the user menu
(see the chapter "User settings", section "Mak-
ing settings in the "DISPLAY" menu", menu item
"LANGUAGE").
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (off) to
50 (maximum).
u
Turn the volume control
volume.
4
to change the
Note:
Setting the reception area
If a telephone or navigation system is con-
nected with the car sound system as de-
scribed in the installation instructions (pin
2 of chamber A), the car sound system is
muted in case of a telephone call or naviga-
tion announcement so that you can hear the
playback of the telephone or navigation sys-
tem undisturbed. During muting, the display
shows "TELEPHONE".
This car sound system is designed for operation in
different regions with different frequency ranges
and station technologies. The factory default of
the reception area is "EUROPE". In addition, the
reception areas "USA", "SOUTH AMERICA" and
"THAILAND" are available.
Note:
If you operate the car sound system outside of
Europe, you may first have to set a suitable re-
ception area in the user menu (see the chapter
"User settings", section "Making settings in the
"TUNER" menu", menu item "TUNER AREA").
Muting the car sound system (Mute)
Briefly press the On/Off button
u
3
to mute
the car sound system or to reactivate the pre-
vious volume.
While it is muted, the display shows "MUTE".
6
Placing the device in operation | Traffic information | Radio mode
for traffic announcements (see the chapter
"User settings", section "Making settings in
the "VOLUME" menu", menu item "TRAFFIC
VOL").
Display brightness
You can manually switch the display brightness
between daytime mode and night-time mode or
switch automatically with the driving lights of the
vehicle.
•
To cancel a switched-through traffic an-
nouncement, press the SRC button
@.
Note:
The manual or automatic switching of the
display brightness is selected in the user
menu (see the chapter "User settings",
section "Making settings in the "DISPLAY"
menu", menu item "DIMMER").
Radio mode
RDS
Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme in
the reception area "EUROPE" that allows the follow-
ing additional functions:
u
Press the DIS button
A
for approx. 2 seconds
to start scanning.
•
•
The station name is shown on the display.
Switching demo mode on/off
The car sound system recognises traffic an-
nouncements and news broadcasts and can
automatically switch them through in other
operating modes (e.g. in CD mode).
Alternate frequency: If RDS is activated, the car
sound system automatically selects the best
receivable frequency for the station that is cur-
rently set.
Regional: At certain times, some radio stations
divide their programme into regional pro-
grammes providing different content. If the
REGIONAL function is activated, the car sound
system changes only to those alternate frequen-
cies on which the same regional programme is
being broadcast.
The demo mode shows the functions of the car
sound system as scrolling text on the display. By
pressing any button, the demo mode is interrupt-
ed and you can operate the device.
•
•
The demo mode can be switched on and off in the
user menu (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu", menu
item "DEMO MODE").
Traffic information
In the reception area "EUROPE", an FM station can
identify traffic reports by means of an RDS signal.
If priority for traffic reports is switched on, a traf-
fic report is automatically switched through, even
if the car sound system is currently not in radio
mode.
The functions RDS and REGIONAL are activated
and deactivated in the user menu (see the chap-
ter "User settings", section "Making settings
in the "TUNER" menu", menu items "RDS" and
"REGIONAL").
If priority is switched on, the display shows the
traffic jam symbol (
). "TRAFFIC" is displayed
during a switched-through traffic announcement.
The priority is activated and deactivated in the
user menu (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu", menu
item "TRAFFICINFO").
Note:
If you adjust a different reception area than
"EUROPE", RDS is automatically switched off.
The station name continues to be shown on
the display. If you want to use radio stations
with RDS features in your region, switch on
RDS in the user menu.
Notes:
•
The volume is increased for the duration
of the switched-through traffic announce-
ment. You can adjust the minimum volume
7
Radio mode
Tuning into stations manually
Changing to radio mode or selecting
a memory bank
The following memory banks are available in the
different reception areas:
u
Press the rotary button
manual station tuning.
7
once to activate
The display briefly shows "SEARCH MANUAL".
u
Turn the rotary control
quency in increments.
7
to change the fre-
Region
Memory banks
EUROPE
USA
SOUTH AMERICA
THAILAND
FM1, FM2, FMT, MW, LW
FM1, FM2, FMT, AM, AMT
FM1, FM2, FMT, AM, AMT
FM1, FM2, FMT, AM, AMT
Note:
The manual station tuning is automatically
exited approx. 15 seconds after the last fre-
quency change, and the station seek tuning is
started by turning the rotary control
7.
u
Press the SRC button
desired memory bank is displayed.
@
repeatedly until the
Storing stations or calling stored
stations
u
u
u
Notes:
•
Up to 5 stations can be stored in each
memory bank.
Select the desired memory bank.
If necessary, set the desired station.
•
You can disable certain memory banks
that you do not want to use (see chapter
"User settings", section "Making settings
in the "TUNER" menu", menu item "BAND
SELECTION"). Deactivated memory banks
are skipped during the source selection
Press the station button 1 - 5
>
for approx.
2 seconds to store the current station under
the button.
- or -
u
Briefly press the station button 1 - 5
up the stored station.
>
to call
with the SRC button
@.
Tuning into a station
Scanning stations
With the scan function, you can scan either every
receivable station or every stored station of the
current waveband.
There are various ways of tuning into a station:
Starting station seek tuning
u
Turn rotary control
clockwise or clockwise to start station seek
tuning.
7
one notch counter-
Note:
You can adjust the scan time for each station
(see the chapter "User settings", section "Mak-
ing settings in the "VARIOUS" menu", menu
item "SCAN TIME").
The display briefly shows "SEARCH AUTO".
The radio tunes into the next receivable sta-
tion.
Scanning all receivable stations of the
waveband
Notes:
•
For the reception area "EUROPE": In the FM
waveband, only traffic information stations
are tuned into if the priority for traffic infor-
u
Press the MENU button
onds to start scanning.
2
for approx. 2 sec-
mation (
) is switched on.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
•
The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SENSITIVITY").
u
Briefly press the MENU button
2
to con-
tinue listening to the station that is currently
being scanned.
8
Radio mode
Scanning all stored stations of the waveband
PTY
u
Press the rotary control
7
for approx. 2 sec-
In the reception areas "EUROPE" and "USA", an FM
station can transmit its current programme type,
e.g. CULTURE, POP, JAZZ, ROCK, SPORT or SCIENCE.
Hence, the PTY function allows a targeted search
for broadcasts of a certain programme type, e.g.
for rock or sports broadcasts. Note that PTY is not
supported by all stations.
onds to start the scanning.
During the scan, the display alternately dis-
plays the current frequency as well as memo-
ry bank and location or station name.
u
Briefly press the rotary control
7
to continue
listening to the station that is currently being
scanned.
Note:
The PTY function is only available if it has been
activated (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu",
menu item "PTY").
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations offering the strongest
reception in the region in one memory bank. Any
previously stored stations in this memory bank are
deleted in the process.
Selecting a programme type
To select a programme type. read the section
"Making settings in the "TUNER" menu", menu
item "PTY TYPES" in the chapter "User settings".
With Travelstore, you can store 5 FM stations in
the FMT memory bank in all reception areas. In
the reception areas "USA", "SOUTH AMERICA" and
"THAILAND", you can also store 5 AM stations in
the AMT memory bank.
Note:
In the reception area "EUROPE", you can adjust
the language in which the programme types
are displayed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "PTY LANGUAGE").
u
Select a memory bank of the desired wave-
band, e.g. FM1 or AM.
Searching for stations
Prerequisite: PTY function is switched on.
u
Press the SRC button
onds.
@
for approx. 2 sec-
u
u
Press the rotary control
The display briefly shows "SEARCH PTY".
Turn rotary control one notch counter-
7
twice.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
7
clockwise or clockwise to start the PTY seek
tuning.
Notes:
During the seek tuning, "SEARCH" and the
currently selected programme type are
shown on the display.
•
For the reception area "EUROPE": If the
priority for traffic information is switched
on (
), only traffic information stations
As soon as a station with the desired pro-
gramme type is found, it remains being tuned
into.
are stored.
•
If the FMT or AMT memory bank is deac-
tivated (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "BAND SELECTION"), it
is automatically reactivated if you initiate
the Travelstore function.
Notes:
•
If no station with the selected programme
type is found, "NO PTY" is briefly displayed
and 2 beeps can be heard. The radio will
then retune to the station that it played
last.
9
Radio mode | CD/MP3/WMA/iPod mode
•
If the tuned radio station or another sta-
tion on the broadcasting network broad-
casts your selected programme type at a
later point in time, the car sound system
will automatically switch from the cur-
rently tuned station or from the current
audio source (e.g. CD) to the station whose
programme type matches the one you se-
lected. Note that this function is not sup-
ported by all stations.
characters reduces the number of tracks
and folders that the car sound system can
recognise)
–
No umlauts or special characters
•
CD formats: audio CD (CDDA), CD-R/RW,
Ø: 12 cm
CD data formats: ISO 9669 Level 1 and 2, Joliet
CD burn speed: Max. 16x (recommended)
USB format/file system: Mass storage device/
FAT16/32
•
•
•
•
•
Memory card file system: FAT16/32
File extension of audio files:
Configuring the display
u
Press the DIS button
A
to toggle between
–
–
.MP3 for MP3 files
.WMA for WMA files
these displays:
Display
Meaning
•
WMA files only without Digital Rights Manage-
ment (DRM) and created with Windows Media
Player version 8 or later
MP3 ID3 tags: Version 1 and 2
Bitrate for creating audio files:
ABCDEF
Station name
Memory bank/memory
location/frequency
FM1 P1 89.90
FM1 P1 08:40
•
•
Memory bank/memory
location/time
–
–
MP3: 32 to 320 kbps
WMA: 32 to 192 kbps
•
Maximum number of files and directories: Up
to 30,000 files/500 directories depending on
the data structure
CD/MP3/WMA/iPod mode
Basic information
iPod mode
CD/MP3/WMA mode
You can connect numerous iPod and iPhone mod-
els to the car sound system via the USB port in the
front of the device and the USB port at the rear
and control the audio playback from the car sound
system.
This car sound system can be used to play audio
CDs (CDDA) and CD-R/RWs with audio, MP3 or
WMA files as well as MP3 or WMA files on USB data
carriers and SD(HC)/MMC memory cards.
Notes:
Notes:
•
To ensure proper functioning, use only CDs
with the Compact-Disc logo.
•
Blaupunkt cannot guarantee the flawless
function of all iPod and iPhone models.
•
Blaupunkt cannot guarantee the flawless
function of copy-protected CDs and all
CD blanks, USB data carriers and memory
cards available on the market.
•
If an iPhone and iPod are connected at the
same time, the devices are charged via the
USB ports. If two iPhones are connected at
the same time, charging is not possible.
Note the following information when preparing
an MP3/WMA data carrier:
Use a suitable adapter cable to connect your iPod
or iPhone with the USB port of the car sound sys-
tem.
•
Naming of tracks and directories:
–
Max. 32 characters without the file exten-
sion ".mp3" or ".wma" (the use of more
10
CD/MP3/WMA/iPod mode
Note:
Changing to CD/MP3/WMA/iPod
mode
You must not hinder or assist the drive as it
automatically draws in the CD.
u
Press the SRC button
@
repeatedly until the
u
Insert the CD with its printed side up into the
CD tray
desired audio source is displayed:
5
until you feel a slight resistance.
•
•
•
"CD": Inserted CD.
The drive automatically draws in the CD and
checks its data. Afterwards, the playback
starts in CD or MP3 mode.
"SD(HC)": Inserted memory card
"USB FRONT" or "USB REAR": USB data
carrier connected to the front or rear.
Note:
•
•
"IPOD FRONT" or "IPOD REAR": iPod con-
nected to the front or rear
If the inserted CD cannot be played back, "CD
ERROR" is briefly displayed and the CD is au-
tomatically ejected after approx. 2 seconds.
"AUX": Connected external audio source.
Notes:
Ejecting a CD
Note:
•
•
•
The respective audio source can be select-
ed only if a corresponding CD is inserted or
a corresponding device is connected.
You must not hinder or assist the drive as it
ejects the CD.
A connected iPod is initially selected un-
der "USB" and, as soon as the iPod is recog-
nised, under "IPOD".
u
Press the
CD.
button
8
to eject an inserted
Notes:
If the car sound system first has to read
the data of a connected device or data car-
rier before the playback, the display shows
"READING". The duration of the reading
depends on the data volume and design
of the device or data carrier. If the device
or data carrier is defective or the trans-
ferred data cannot be played back, a corre-
sponding message appears on the display
(e.g. "CD ERROR").
•
If a CD is ejected and not removed, the
drive will automatically draw it back in
again after approx. 10 seconds.
•
You can also eject CDs while the car sound
system is switched off or whilst another au-
dio source is activated.
Connecting/removing a USB data
carrier
Inserting/ejecting a CD
Note:
You can connect USB data carriers to the USB
port at the front of the device as well as the
rear USB port.
Inserting a CD
Risk of severe damage to the CD
drive!
Connecting a USB data carrier
Noncircular contoured CDs (shape CDs)
and CDs with a diameter of 8 cm (mini CDs) must
not be used.
u
Switch off the car sound system so that the
data carrier will be correctly registered.
u
First, pull the protective cap of the USB port
We accept no responsibility for any damage to the
CD drive that may occur as a result of the use of
unsuitable CDs.
:
to the front until it moves out of the port
and fold it to the right to connect a data car-
rier to the USB port at the front of the device.
u
u
Connect the USB data carrier.
Turn on the car sound system.
11
CD/MP3/WMA/iPod mode
If the USB data carrier is initially selected as
audio source, the data are read first.
Selecting tracks
u
Turn rotary control
7
one notch counter-
Notes:
clockwise or clockwise to change to the pre-
vious/next track.
•
If the connected USB data carrier cannot
be seen, "USB ERROR" is briefly displayed.
Notes:
•
The time required for reading in the data
depends on the design and size of the USB
data carrier.
•
If you turn rotary control
7
several
notches counter-clockwise or clockwise,
you jump forward or reverse by the corre-
sponding number of tracks.
Removing a USB data carrier
•
If the current track plays longer than 3
seconds and you turn rotary control
u
Switch off the car sound system so that the
data carrier will be correctly unregistered.
7
by
one notch counter-clockwise or clockwise,
the tracks starts playing again.
u
u
Disconnect the USB data carrier.
After you pulled off the data carrier from the
USB port at the front of the device, close the Fast searching
protective cap of the USB port
:.
u
Press the rotary control
7
once.
The display briefly shows "CUE/REVIEW".
Inserting/removing the memory card
u
Turn the rotary control
7
until the desired
Inserting the memory card
position has been reached.
u
u
Detach the control panel.
Note:
Insert the memory card with its labelled side
up and its contacts first into the card slot
until it clicks into place.
If you press the rotary control
display briefly shows "TRACK SELECT". By
turning the rotary control
different track.
7
twice, the
B
7, you select a
u
Attach the control panel.
After switch-on, the device automatically
selects the inserted memory card as audio
source. The data of the memory card are be-
ing read. Afterwards, the playback starts in
MP3 mode.
Interrupting playback
u
Press the 3 button
>
to interrupt the
playback ("PAUSE") or to continue it.
Scanning all tracks
The scan function scans all available tracks.
Notes:
•
If the inserted memory card cannot be
played, "SD ERROR" is briefly displayed.
u
Press the rotary control
7
for approx. 2 sec-
onds to start the scan, or briefly to continue
•
The time required for reading the card
depends on the design and size of the
memory card.
playing the currently scanned track.
During the scan, the display alternately dis-
plays "SCAN" and the current track number
or file name.
Removing the memory card
u
u
u
u
Detach the control panel.
Note:
Push on the memory card until it disengages.
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").
Pull the memory card out of the card slot
Attach the control panel.
B.
12
CD/MP3/WMA/iPod mode
Playing tracks in random order
Configuring the display
u
Press the 5 MIX button
>
to change among
u
Press the DIS button
A
once or several times
the playback modes:
to toggle between these displays:
Opera- Display
tion
Meaning
Opera- Display / icon
tion
Meaning
CD/
Track num-
ber and play-
ing time
MIX ALL
iPod
Mixing tracks
TRACK 01 00:15
Mixing tracks of
the current folder
MIX FOLDER
Track
number and
duration
MP3/
WMA
TRACK 01 03:37
TRACK 01 08:40
CD
Mixing tracks of
the data carrier
MIX ALL
Track
number and
time
Gen.
MIX OFF
Regular playback
If the MIX function is switched on, the icon
MIX (mix all tracks) or MIX (mix tracks of
current folder) is shown on the display.
ABCDEF /
ABCDEF /
ABCDEF /
ABCDEF /
ABCDEF /
PLAY TIME 00:15
File name ²
Track name ¹
Artist ¹
Repeatedly playing individual tracks
or directories
Album ¹
MP3/
WMA/
iPod
Genre ³
u
Press the 4 RPT button
the playback modes:
>
to change among
Playing time
Track dura-
tion
Opera- Display
tion
Meaning
TOTAL TIME 03:37
ALL INFO /
All informa-
tion as scroll-
ing text
CD/
iPod
Repeating
tracks
REPEAT TRACK
REPEAT TRACK
REPEAT FOLDER
REPEAT OFF
Repeating
tracks
¹ Track name, artist and album name must be
stored as ID3 tag to be able to display them.
² The file name is displayed only in MP3/WMA
mode.
³ The genre information is available only on
iPod mode.
MP3/
WMA
Repeating
folders
Regular
playback
Gen.
If the REPEAT function is switched on, the icon
Note:
(repeat tracks) or
(repeat
With every track change, the file name is
briefly shown in MP3/WMA mode and the
track name in iPod mode before the display
switches to the defined display.
folders) is shown on the display.
13
CD/MP3/WMA/iPod mode
Browse mode in iPod mode
Browse mode
In Browse mode, you can directly search for and
select a certain track on the MP3/WMA data carrier
or iPod without interrupting the current playback.
In iPod mode, you can select and play the tracks
via the categories "ARTISTS", "ALBUMS", "GENRES"
or "PLAYLISTS".
u
Press the 2 ID3 button
Browse mode in the iPod mode.
>
to call up the
Browse mode in MP3/WMA mode
In MP3/WMA mode, you can select and play a
track from a directory of the data carrier.
The display shows the
first category, "ARTISTS", is displayed.
icon. The
u
Briefly press the 1 LIST button
the browse mode in MP3/WMA mode.
>
to call up
Notes:
•
Press the 2 ID3 button
>
for approx.
The display shows the
icon. The
2 seconds to directly call up the "PLAYLISTS"
first or current folder on the data carrier and
category.
the
icon are displayed.
•
•
The browse mode remains switched on for
5 minutes without confirming a selection.
Notes:
•
The first folder is displayed only if the
browse mode has been called for the first
time after inserting or connecting the data
carrier. Afterwards, the current folder is
displayed whenever the browse mode is
called.
You can exit the browse mode at any time
by pressing the 2 ID3 button
>.
u
u
Turn the rotary control
category "ALBUMS"
or "PLAYLISTS"
7
to select the
,
"GENRES"
.
Press the rotary control
available folders of the category.
7
to display the
•
•
The browse mode remains switched on for
5 minutes without confirming a selection.
The first folder of the selected category is
shown on the display (e.g. "JAZZ" in the
"GENRES" category).
You can exit the browse mode at any time
by pressing the 1 LIST button
>.
u
u
Turn the rotary control
ent folder.
7
to select a differ-
Note:
To return to the list of categories, turn the
Press the rotary control
tracks of the selected folder.
7
to display the
rotary control
7
until the "<<<" option is
selected and press the rotary control
7.
The first track of the folder and the icon are
shown on the display.
u
u
Turn the rotary control
ent folder.
7
to select a differ-
Note:
Press the rotary control
available tracks of the folder.
7
to display the
To return to the folder list, turn the rotary con-
trol
7
until the "<<<" option is selected and
The first track of the folder is shown on the
display.
press the rotary control
7.
u
u
Turn the rotary control
ent track.
7
to select a differ-
Note:
To return to the folder list, turn the rotary con-
Press the rotary control
7
to play the track.
trol
7
until the "<<<" option is selected and
The playback starts. You are exiting the
browse mode.
press the rotary control
7.
u
Turn the rotary control
ent track.
7
to select a differ-
14
CD/MP3/WMA/iPod mode | Bluetooth®
u
Press the rotary control
7
to play the track.
Bluetooth®
(Toronto 420 BT only)
The playback starts. You are exiting the
browse mode.
You can connect theToronto 420 BT via Bluetooth®
with other Bluetooth®-ready devices, such as cell
phones or MP3 players. This allows you to use the
car sound system with its integrated microphone
as hands-free system for connected cell phones
and control the audio output of other Bluetooth®
devices and play them back via the loudspeakers
of the car sound system (Bluetooth® streaming).
Searching by track names
(not in iPod mode)
On MP3/WMA data carriers, you can find a track
based on its file name and start the playback.
u
Press the 1 LIST button
>
for approx. 2 sec-
onds to start the search function.
Note:
You can now enter a file name with up to
16 characters:
You can also connect an external microphone
for hands-free calling (see the chapter "Instal-
lation instructions").
Notes:
•
You do not have to enter the complete file
name. You can enter only the first charac-
ters of the file name and select the desired
track from the list of tracks found.
Bluetooth® technology is a wireless connection of
short range. For this reason, Bluetooth® devices
must be located near the car sound system (in the
vehicle) to establish and maintain a connection.
To establish a Bluetooth® connection, you must
first pair the car sound system and the Bluetooth®
device. When you pair the devices, a Bluetooth®
connection is subsequently established automati-
cally. This connection remains in effect as long as
the Bluetooth® device is within range. If the con-
nection is interrupted, e.g. because you moved
the cell phone outside the range, the connection
is automatically re-established as soon as you are
back within range.
•
You can exit the search function at any
time by briefly pressing the 1 LIST button
>.
u
u
u
Turn the rotary control
7
to select a charac-
ter for the respective position.
Press the rotary control
position.
7
>
to go to the next
for approx. 2 sec-
Press the 1 LIST button
onds to start the search.
You can connect only one cell phone and stream-
ing device with the car sound system at a time.
If you connect a new device with the car sound
system, the connection to a currently connected
device may automatically be interrupted. How-
ever, the car sound system leaves up to 5 different
Bluetooth® devices paired, and you can quickly
and easily connect any of these devices with the
car sound system again.
All tracks corresponding to the file name en-
tered are listed.
u
u
If necessary, turn the rotary control
select a track.
7
to
Press the rotary control
back.
7
to start the play-
Bluetooth® menu
In the Bluetooth® menu, you find all the functions
for pairing, connecting and managing Bluetooth®
devices.
15
Bluetooth®
Calling the Bluetooth® menu
Pairing and connecting a cell phone
Note:
u
u
u
u
u
u
Briefly press the MENU
2
button to open
until the "BLUE-
the user menu.
If a connection with a cell phone currently ex-
ists, this connection is automatically discon-
nected if you pair and connect another cell
phone.
Turn the rotary control
TOOTH" menu item is selected.
7
Press the rotary control
tooth® menu.
7
to open the Blue-
u
u
In the Bluetooth® menu, select the "PAIRING"
menu item.
Turn the rotary control
menu item is selected.
7
until the desired
Press the rotary control
7
to open the menu.
Perform the setting (see the following sec-
tions).
The "MOBILE PHONE" menu item is selected.
u
Press the rotary control
phone.
7
to register a cell
Briefly press the MENU button
menu.
2
to exit the
The display shows "PAIRING" and the Blue-
tooth® symbol is flashing. The car sound
system can now be recognised by a Blue-
tooth® cell phone for approx. 2 minutes and
connected.
Notes:
•
•
•
The Bluetooth® menu is automatically ex-
ited approx. 60 seconds after the last but-
ton activation and you are returned to the
display of the current audio source.
u
u
Search the car sound system from your cell
phone (Bluetooth® name: "BP 420 BT").
To go back to the next higher-level menu,
turn the rotary control
7
until the "<<<"
As soon as the car sound system is located
by the cell phone and is to be connected, the
display briefly shows "ENTER PIN" and the cur-
rently stored PIN (by default "1234").
option is selected and press the rotary con-
trol
If
7.
a
Bluetooth® process is running (e.g.
re-establishing the connection to the last
connected device), the functions of the
Bluetooth® menu are blocked. If you at-
tempt to open the Bluetooth® menu dur-
ing this time, "LINK BUSY" briefly appears
on the display. If you want to cancel the
Bluetooth® process and open the Blue-
Establish the connection from your cell
phone. Enter the PIN displayed by the car
sound system.
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the cell phone are paired and con-
nected.
tooth® menu, press the
button
<.
Notes:
If no connection can be established, the dis-
play briefly shows "CONNECT FAILED".
Pairing and connecting a device
Note:
You can pair up to 5 Bluetooth® devices with
this car sound system. Before you can pair a
sixth device, you must first unpair one of the
5 already paired devices (see ch. "Additional
functions in the Bluetooth® menu", section
"Managing paired devices").
If you should attempt to pair a sixth Blue-
tooth® device, "PHONE LIST FULL – PLEASE
DELETE ENTRIES FROM LIST" is displayed.
Pairing and connecting a Bluetooth®
streaming device
Note:
If a connection with a streaming device cur-
rently exists, this connection is automatically
disconnected if you pair and connect another
streaming device.
16
Bluetooth®
u
u
In the Bluetooth® menu, select the "PAIRING"
menu item.
Notes:
•
If no connection can be established, the
display briefly shows "CONNECT FAILED".
Press the rotary control
7
to open the menu.
•
After switch-on, the car sound system
automatically attempts to reconnect the
device connected last. If the connection
attempt fails, the display briefly shows
"CONNECTION LOST". If necessary, attempt
to re-establish the connection from the
streaming device.
The "MOBILE PHONE" menu item is selected.
u
u
Turn the rotary control
"STREAMING" menu item.
7
7
to select the
to register
Press the rotary control
streaming device.
a
The display shows the currently stored
PIN (default "1234"). If required, enter the
PIN of the streaming device:
Telephone functions
u
u
Turn the rotary control
7
to select a digit for
Answering/rejecting an incoming phone call
the respective position.
With an incoming call, the display alternately
shows "INCOMING CALL" and the number of the
caller. The current audio source is muted and a
ring tone is played via the loudspeakers of the car
sound system.
Press the rotary control
position.
7
to go to the next
Notes:
•
To return to the previous position for the
PIN entry, turn the rotary control until
the "<<<" option is selected, and press the
rotary control
Note:
7
If the number of the caller is not being trans-
mitted, the display shows "PRIVATE NUM-
BER" instead of the number. If the number
of the caller is stored together with a name,
the name of the entry and the number are
displayed (see the section "Storing a phone
number in the car sound system" in this chap-
ter).
7
.
•
Not all streaming devices require the entry
of a PIN on the car sound system. For some
streaming devices, you have to enter the
PIN of the car sound system instead. For
these devices, press only the rotary control
7
repeatedly until you reach beyond the
last position, thereby confirming the cur-
rent PIN, and then enter this PIN on the
streaming device.
u
u
Press the
button
=
to answer the call.
"CALL" and the duration of the ongoing call
are displayed.
The display shows "PAIRING" and the Blue-
tooth® symbol is flashing. The car sound sys-
tem can now be recognised by the streaming
device for approx. 2 minutes and connected.
Press the
to end the current call.
<
button to reject the call or
The display shows "CALL END".
Notes:
u
Searchthecarsoundsystemfromyourstream-
ing device (Bluetooth® name: "BP 420 BT") and
establish the connection. Enter the PIN of the
car sound system, if necessary.
•
During the call, you can adjust the volume
with the volume control or mute the
device with a short press of the On/Off
button
4
3
.
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the streaming device are paired and
connected.
•
You can adjust the volume for the call play-
back in the user menu (see the chapter
"User settings", section "Making settings in
the "VOLUME" menu", menu item "HANDS-
FREE VOL").
17
Bluetooth®
Making a call
u
u
Turn the rotary control
ent entry.
7
to select a differ-
u
In the Bluetooth® menu, select the "DIAL NEW
NUMBER" menu item.
Press the rotary control
ton to call the number.
7 or the but-
=
u
Press the rotary control
menu.
7
to open the entry
"CALLING" and the dialed number are alter-
nately shown on the display.
You can now enter a phone number with up
to 20 digits:
Note:
u
u
Turn the rotary control
7
to select a digit for
You can also call an entry in the phone book
via speed dial (see the section "Speed dial for
phone book entries" in this chapter).
the respective position.
Press the rotary control
position.
7
to go to the next
Making a call with voice dial
Note:
Note:
To return to the previous position in the en-
try menu, turn the rotary control until the
"<<<" option is selected, and press the rotary
control
This function is only available if the connected
cell phone supports voice dial.
7
u
u
In the Bluetooth® menu, select the "VOICE
DIAL" menu item.
7
.
u
Press the
entered.
button
=
to call the number
Press the rotary control
7
or the
but-
ton to activate voice recognition.
=
"CALLING" and the dialed number are alter-
nately shown on the display.
The car sound system is muted and the dis-
play shows "SPEAK NOW".
As soon as your calling party answers the call,
the display shows "CALL" and the time of the
current phone call.
u
Say the name of the desired calling partner.
Notes:
Upon ending the call, the display briefly
shows "CALL END".
•
If no Bluetooth® connection is established
when voice recognition is activated,
the display briefly shows "VOICE DIAL
FAILED – NO BT CONNECTION".
Calling an entry in the phone book
Note:
•
If the spoken name is not being recognised
or the time for the voice recognition has
already expired, the display briefly shows
"DIAL FAILED".
This function is available only if the phone
book of the connected cell phone was trans-
ferred to the car sound system (see the chap-
ter "Phone book functions").
•
•
You can cancel the voice recognition by
u
u
In the Bluetooth® menu, select the "PHONE-
BOOK" menu item.
pressing the
button
<.
Please note that the duration of the voice
recognition is limited and depending on
the respective cell phone.
Press the rotary control
book.
7
to open the phone
The display shows the first phone book entry.
•
You can also activate the voice recognition
via speed dial (see the section "Speed dial
for voice dial" in this chapter).
Note:
If the phone book has not yet been trans-
ferred, the display briefly shows "PHONE-
BOOK NOT AVAILABLE".
18
Bluetooth®
Storing a phone number in the car sound
system
Speed dial for any phone number or for the
number dialed last or a stored number
You can store phone numbers in the car sound
system and make calls using the speed dial (see
the following section).
With speed dial, you can make a call without first
having to select the corresponding function in the
Bluetooth® menu.
A phone number is stored for the currently con-
nected telephone and is available only for this tel-
ephone. The car sound system can store up to five
numbers for up to five paired devices.
To call the number dialed last,
u
press the
button
=.
The display shows the number dialed last.
Note:
u
Enter the phone number as described in the
section "Making a call".
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIRING"
menu item is selected.
u
Press the desired memory button 1 - 5
>
for
approx. 2 seconds to store only the number.
u
Press the
button
=
to call the number.
- or -
"CALLING" and the dialed number are alter-
nately shown on the display.
u
Press the rotary control
7
for approx. 2 sec-
onds to enter a name for the entry.
To call a stored number,
You can now enter a name with up to 15 char-
acters:
u
u
press the
button
=.
Press a memory button 1 - 5
number stored.
>
to call the
u
u
Turn the rotary control
7
to select a charac-
ter for the respective position.
Note:
Press the rotary control
position.
7
to go to the next
If no number is stored under the selected
memory button, the display briefly shows
"NO NUMBER".
Note:
To return to the previous position in the en-
try menu, turn the rotary control until the
"<<<" option is selected, and press the rotary
control
Press the desired memory button
u
Press the
button
=
to call the number.
7
"CALLING" and the dialed number are alter-
nately shown on the display.
7.
To call any number,
u
u
u
press the
button
=.
1 - 5
>
for approx. 2 seconds to store the
number and name.
Press the On/Off button
3
to open the entry
menu and enter a number (enter the phone
number as described in the section "Making
a call").
The display briefly shows "NUMBER SAVED".
Afterwards, you are returned to the Blue-
tooth® menu and the "DIAL NEW NUMBER"
menu item.
u
Press the
button
=
to call the number.
Notes:
"CALLING" and the dialed number are alter-
nately shown on the display.
•
A number previously stored on the memo-
ry button is replaced.
•
If a telephone is unpaired, the numbers
stored for this telephone are automatically
deleted.
19
Bluetooth®
Speed dial for phone book entries
Bluetooth® streaming mode
Note:
Starting the Bluetooth® streaming mode
This function is only available
u
Press the SRC
@
button repeatedly until
•
if the phone book of the connected cell
phone was transferred to the car sound
system (see the chapter "Phone book func-
tions").
if the speed dial is set for phone book en-
tries (see the chapter "Additional functions
in the Bluetooth® menu", section "Setting
the button function for speed dial").
"BT-STREAM" appears on the display.
The playback starts.
Notes:
•
•
The Bluetooth® streaming mode can be se-
lected only if a suitable streaming device
is connected.
•
If the connection to the streaming device
is lost during playback, the display briefly
shows "CONNECTION LOST" and the car
sound system changes to the previous au-
dio source.
To select an entry of the phone book with the
speed dial and call it,
u
press the
onds.
button
=
for approx. 2 sec-
The display shows the first phone book entry.
Selecting tracks
Turn rotary control
u
u
If necessary, select another entry as described
in the section "Calling an entry in the phone
book".
u
7
one notch counter-
clockwise or clockwise to change to the pre-
vious/next track.
Press the
button
=
to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
Interrupting playback
Press the 3 button
playback ("PAUSE") or to continue it.
u
>
to interrupt the
Speed dial for voice dial
Note:
Phone book functions
This function is only available
Transferring the phone book of the cell phone
to the car sound system
You can transfer the phone book of the connected
cell phone to the car sound system to call entries
of the phone book using the car sound system.
•
if the connected cell phone supports voice
dial.
if the speed dial is set for voice dial (see the
chapter "Additional functions in the Blue-
tooth® menu", section "Setting the button
function for speed dial").
•
Notes:
To activate the voice recognition with the speed
dial,
•
The car sound system accepts only entries
from the memory of the telephone and
not from the SIM card inserted in the tel-
ephone.
u
press the
onds.
button
=
for approx. 2 sec-
The car sound system is muted and the dis-
play shows "SPEAK NOW".
•
The transfer does not delete the phone
book from the cell phone.
u
Say the name of the desired calling partner.
The car sound system can store the phone books
of the paired telephones with a total of up to 960
entries. If several numbers are stored on the tel-
ephone for one contact (e.g. landline, cell phone
number, office number and similar), each number
is stored as a separate entry by the car sound sys-
tem.
20
Bluetooth®
Each entry consists of a name and a number, each
up to 20 characters on digits.
•
If you insert a CD during an ongoing trans-
fer, the playback does not start until the
transfer is completed.
Note:
Do not switch off the car sound system while
transferring the phone book. If you do or if the
power supply of the car sound system should
be interrupted for any reason, you have to re-
start the transfer.
Deleting the phone book of the cell phone
from the car sound system
You can delete the phone book of the connected
cell phone.
Note:
u
u
In the Bluetooth® menu, select the "DOWN-
LOAD P–BOOK" menu item.
The telephone remains connected.
u
u
In the Bluetooth® menu, select the "DELETE
P–BOOK" menu item.
Press the rotary control
The display shows "CONFIRM".
Press the rotary control again.
7.
Press the rotary control
The display shows "CONFIRM".
Press the rotary control again.
7.
u
7
"PHONEBOOK DOWNLOADING
WAIT" appears on the display.
–
PLEASE
u
7
After the download is complete, the display
briefly shows "DOWNLD COMPLETE".
Additional functions in the
Bluetooth® menu
Notes:
Changing the Bluetooth® PIN
•
To cancel the transfer, press the
ton
but-
The factory-set Bluetooth® PIN of the car sound
system is "1234"; e.g. it must be entered on the
cell phone when pairing a cell phone. This PIN can
be changed.
<
.
•
If the transfer of the phone book fails,
the display briefly shows "DOWNLOAD
FAILED".
u
In the Bluetooth® menu, select the "PIN EDIT"
menu item.
•
•
If the transfer of the phone book exceeds
the storage capacity of the car sound sys-
tem, the display briefly shows "PHONE-
BOOK FULL". The phone book entries trans-
ferred so far remain stored.
u
Press the rotary control
menu.
7
to open the entry
You can now enter the PIN:
If you supplemented or changed entries
on your cell phone since the last transfer,
you can update the phone book on the car
sound system by transferring it again. If the
storage capacity of the car sound system
is exceeded in the process, first delete the
already transferred phone book (see the
next section) or unpair another cell phone,
if necessary, so that its phone book is also
deleted from the car sound system (see the
chapter "Additional functions in the Blue-
tooth® menu", section "Managing paired
devices").
u
u
Turn the rotary control
7
to select a digit for
the respective position.
Press the rotary control
position.
7
to go to the next
Note:
To return to the previous position in the
entry menu, turn the rotary control until
the "<<<" option is selected, and press the
rotary control
7
7
.
21
Bluetooth®
Managing paired devices
To unpair the displayed device,
u
press the
onds.
button
<
for approx. 2 sec-
In the Bluetooth® menu, you can manage the
paired Bluetooth® devices (cell phones and
streaming devices such as MP3 player).
In the device lists for cell phones and streaming
devices, the Bluetooth® names or addresses of the
paired devices are displayed. You can do the fol-
lowing:
The display briefly shows "DELETED" and you
are returned to the Bluetooth® menu.
Note:
If a telephone is unpaired, the numbers stored
for this telephone and a phone book trans-
ferred from this cell phone are automatically
deleted.
•
Disconnecting the connection to the currently
connected Bluetooth® device
•
Establishing a connection to one of the paired
Bluetooth® devices
To unpair all the cell phones or streaming devices,
u
u
select the "DELETE ALL" menu item.
Press the rotary control
The display shows "CONFIRM".
Press the rotary control or the
ton again.
The display briefly shows "EMPTY LIST".
•
Unpairing Bluetooth® devices
7
.
u
In the Bluetooth® menu, select the menu item
"PHONE LIST" or "STREAMING LIST".
u
Press the rotary control
7
to open the menu.
u
7
but-
=
The first device on the list is displayed.
Note:
If no device is paired, "EMPTY LIST" is briefly
displayed.
Setting the button function for speed dial
You can select whether the long press of the
u
Turn the rotary control
7
to select a different
button
=
voice dial.
opens the phone book or activates
device or the "DELETE ALL" option.
You have the following options:
To connect the displayed device,
u
In the Bluetooth® menu, select the "SOFTKEY"
menu item.
u
press the
button
=.
Next to "SOFTKEY", the current "P–BOOK" set-
ting for phone book or "VOICE" for voice dial
is displayed.
As soon as the device is connected, "CON-
NECTED" is briefly displayed and you are re-
turned to the Bluetooth® menu.
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
Note:
Turn the rotary control
tween the settings.
If no connection can be established, the
display briefly shows "CONNECT FAILED". If
the device is already connected, the display
briefly shows "CONNECT EXIST".
Press the rotary control
setting.
To disconnect the connection to the displayed
device,
u
press the
button
<.
The display briefly shows "DISCONNECTED"
and you are returned to the Bluetooth® menu.
Note:
If the device was not connected, the display
briefly shows "NO CONNECTION".
22
External audio sources | Sound settings
External audio sources
Front AUX-IN socket
Danger!
Sound settings
The following sound settings can be changed in
the "AUDIO" menu:
•
•
Adjusting bass and treble
Setting the left/right volume distribution
(Balance) or front/rear (Fader)
Increased risk of injury from
connector.
•
Adjusting the increase of bass at low volume
(Loudness)
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries. The
use of straight plugs or adapters leads to an in-
creased risk of injury.
•
•
Selecting a sound profile (Sound Preset)
Setting level and frequency of the preamplifier
output (Sub-Out)
For this reason, we recommend using angled
jack plugs, e.g. the Blaupunkt accessories cable
(7 607 001 535).
•
•
Setting the 3-band equaliser
Adjusting the time delay for switching in an
external amplifier
As soon as an external audio source, such as a
portable MP3 player is connected to the front
Calling and exiting the "AUDIO"
menu
AUX-IN socket
;, it can be selected with the SRC
u
u
u
u
Briefly press the MENU button
2
to open
button . "AUX" then appears on the display.
@
the user menu.
Notes:
Turn the rotary control
menu item is selected.
7
until the "AUDIO"
to open the
7 until the desired
•
You can enter an individual name for the
AUX source that is shown on the display in
AUX mode (see the chapter "User settings",
section "Making settings in the "VARIOUS"
menu", menu item "AUX EDIT").
Press the rotary control
"AUDIO" menu.
7
Turn the rotary control
menu item is selected.
•
You can play back an AUX source at the
same time with one of the internal audio
sources of the car sound system. Hence,
you can play back the announcements of
a navigation device connected to the front
u
u
Perform the setting (see the next section).
Briefly press the MENU button
2
to exit the
menu.
AUX-IN socket
;
via the loudspeakers of
Notes:
the car sound system while listening to
the radio or a CD at the same time. In ad-
dition, you can adjust the volume levels of
both audio sources to each other. For more
details, please read the section "Making
settings in the "VARIOUS" menu", menu
items "AUX MIX" and "AUX MIX GAIN" in
the chapter "User settings".
•
The menu is automatically exited approx.
60 seconds after the last button activation
and you are returned to the display of the
current audio source.
•
To go back to the next higher-level menu,
turn the rotary control
7
until the "<<<"
option is selected and press the rotary con-
trol
7
.
23
Sound settings
LOUDNESS
Making settings in the "AUDIO" menu
Increase of bass at low volume. Settings: ON, OFF.
BASS
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
Bass level. Settings: –7 to +7.
u
u
u
Press the rotary control
setting.
7
to change the
Turn the rotary control
tween the settings.
Turn the rotary control
level is set.
7
until the desired
Press the rotary control
setting.
Press the rotary control
setting.
7
to confirm the
to change the
PRESET EQ (sound profile)
Selecting equalizer presettings. Settings: PRESET
EQ POP, PRESET EQ ROCK, PRESET EQ CLAS (clas-
sic), PRESET EQ OFF (sound profile off; no preset-
ting).
TREBLE
Treble. Settings: –7 to +7.
u
u
u
Press the rotary control
setting.
7
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
Turn the rotary control
level is set.
7
until the desired
to confirm the
Turn the rotary control
tween the settings.
Press the rotary control
setting.
7
Press the rotary control
setting.
BALANCE
SUB-OUT
Left/right volume distribution. Settings: L9 (left)
to R9 (right).
Setting the level and frequency of the preampli-
fier output.
u
u
u
Press the rotary control
setting.
7
to change the
until the desired
to confirm the
u
u
Press the rotary control
Turn the rotary control
tween the following menu items:
7
to open the menu.
Turn the rotary control
7
7
to change be-
volume distribution is set.
Press the rotary control
setting.
7
–
FREQUENCY
(settings: 80/120/160 Hz)
–
GAIN
FADER
(settings: 0 to +7)
Front/rear volume distribution. Settings: R9 (rear)
to F9 (front).
u
u
u
Press the rotary control
setting for the selected menu item.
7
to change the
u
u
u
Press the rotary control
setting.
7
to change the
until the desired
to confirm the
Turn the rotary control
frequency.
7
to set the level or
to confirm the
Turn the rotary control
volume distribution is set.
7
Press the rotary control
setting.
7
Press the rotary control
setting.
7
24
Sound settings
AMP DELAY
EQUALIZER
Setting the delay with which a connect amplifier
is switched in. Settings: 0.5/1.0/1.5/2.0/2.5 seconds
Switching the equalizer on or off. Settings: ON,
OFF.
and OFF (no delay)
.
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
u
u
u
Press the rotary control
7
to change the
until the desired
to confirm the
setting.
Turn the rotary control
tween the settings.
Turn the rotary control
delay is set.
7
Press the rotary control
setting.
Press the rotary control
setting.
7
EQ TREBLE
Adjusting treble frequency and level of the equal-
izer.
Setting the 3-band equaliser
The radio features a 3-band equaliser. For each of
the three treble, middle and bass bands, you can
select a frequency as well as adjust the level. In ad-
dition, you can adjust the quality factor for bass
and middle.
u
u
Press the rotary control
Turn the rotary control
tween the following menu items:
7
to open the menu.
7
to change be-
–
FREQUENCY
(settings: 10/12.5/15/17.5 kHz)
The equaliser also provides an adjustable increase
of the bass at low volume (X-bass).
–
GAIN
(settings: –7 to +7)
Opening the "EQUALIZER" menu
u
u
u
Press the rotary control
7
to change the
u
In the "AUDIO" menu, select the "EQUALIZER"
menu item.
setting for the selected menu item.
Turn the rotary control
frequency.
7
to set the level or
to confirm the
u
u
Press the rotary control
Turn the rotary control
tween the following menu items:
7
to open the menu.
7
to change be-
Press the rotary control
setting.
7
–
–
–
–
–
EQUALIZER
EQ TREBLE
EQ MIDDLE
EQ BASS
EQ MIDDLE
Adjusting centre frequency and level of the equal-
izer.
u
u
Press the rotary control
Turn the rotary control
tween the following menu items:
7
to open the menu.
EQ X-BASS
7
to change be-
Note:
The submenus in the "EQUALIZER" menu are
not automatically exited after the last key has
been activated. After the setting, press the
–
–
–
FREQUENCY
(settings: 0.5/1.0/1.5/2.5 kHz)
MENU button
2
to exit the menu.
GAIN
(settings: –7 to +7)
Q-FACTOR
(settings: 0.5/0.75/1.0/1.25)
u
Press the rotary control
7
to change the
setting for the selected menu item.
25
Sound settings | User settings
u
u
Turn the rotary control
frequency or Q-factor.
7
to set the level,
to confirm the
User settings
Press the rotary control
setting.
7
Calling the user menu and selecting
a menu
u
Briefly press the MENU
the user menu.
2
button to open
EQ BASS
Adjusting bass frequency and level of the equal-
izer.
In the user menu, the user settings can be found in
the following menus:
u
u
Press the rotary control
Turn the rotary control
tween the following menu items:
7
to open the menu.
•
•
•
•
•
•
•
TUNER
7
to change be-
AUDIO (see chapter "Sound settings")
DISPLAY
VOLUME
CLOCK
–
–
–
FREQUENCY
(settings: 80/100/200 Hz)
GAIN
(settings: –7 to +7)
Q-FACTOR
(settings: 1.0/1.25/1.5/2.0)
VARIOUS
BLUETOOTH (Toronto 420 BT only, see the
chapter "Bluetooth®")
u
u
u
Press the rotary control
7
to change the
u
u
u
u
u
Turn the rotary control
menu is selected.
7
until the desired
setting for the selected menu item.
Turn the rotary control
frequency or Q-factor.
7
to set the level,
to confirm the
Press the rotary control
selected menu.
7
to open the
Press the rotary control
setting.
7
Turn the rotary control
menu item is selected.
7
until the desired
Perform the setting (see the following
sections).
EQ X-BASS
Adjusting the frequency and level for the increase
of bass at low volume.
Briefly press the MENU button
menu.
2
to exit the
u
u
Press the rotary control
Turn the rotary control
tween the following menu items:
7
to open the menu.
Notes:
7
to change be-
•
The menu is automatically exited approx.
60 seconds after the last button activation
and you are returned to the display of the
current audio source.
–
FREQUENCY
(settings: 60/80/100 Hz)
–
GAIN
(settings: 0 to +3)
•
To go back to the next higher-level menu,
turn the rotary control
7
until the "<<<"
u
u
u
Press the rotary control
setting for the selected menu item.
7
to change the
option is selected and press the rotary con-
trol
7
.
Turn the rotary control
frequency.
7
to set the level or
to confirm the
Press the rotary control
setting.
7
26
User settings
Notes:
Making settings in the "TUNER"
menu
•
In the factory default, all AM memory
banks are deactivated.
TRAFFICINFO (traffic information)
(only for reception area EUROPE)
Only possible in FM radio mode: Switching prior-
ity for traffic announcements on or off. Settings:
ON, OFF.
•
If a memory bank is deactivated, the sta-
tions stored in this memory bank are re-
tained.
REGIONAL
(only for reception area EUROPE)
Only possible in FM radio mode: Switching
REGIONAL function on or off. Settings: ON, OFF.
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
Turn the rotary control
tween the settings.
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
Press the rotary control
setting.
Turn the rotary control
tween the settings.
If priority is switched on for traffic information, the
Press the rotary control
setting.
display shows the icon
.
BAND SELECTION
Activating or deactivating memory banks.
SENSITIVITY
Setting the sensitivity of station seek tuning. Set-
tings: LO (–; low), HI (+; high).
Memory banks that can be deactivated:
Region
Memory banks
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
EUROPE
USA
SOUTH AMERICA
THAILAND
FM2, FMT, MW, LW
FM2, FMT, AM, AMT
FM2, FMT, AM, AMT
FM2, FMT, AM, AMT
Turn the rotary control
tween the settings.
Press the rotary control
setting.
Settings in each case: ON, OFF.
RDS
u
u
Press the rotary control
7
to open the menu.
until the desired
Switching the RDS function on or off. Settings: ON,
OFF.
Turn the rotary control
memory bank is set.
7
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
u
u
Press the rotary control
setting.
7
to change the
Turn the rotary control
tween the settings.
Turn the rotary control
7
to toggle between
the settings ON (activate memory bank) and
Press the rotary control
setting.
OFF (deactivate memory bank).
u
Press the rotary control
setting.
7
to confirm the
Note:
If the reception area "USA", "SOUTH AMERICA"
or "THAILAND" is selected, RDS is automati-
cally switched off. The station name continues
to be shown on the display.
Deactivated memory banks are skipped during
the source selection with the SRC button
@
.
27
User settings
PTY
TUNER AREA (reception area)
Switching the PTY function on or off. Settings: ON,
OFF.
Select the reception area for the radio reception.
Settings: EUROPE, USA, SOUTH AMERICA, THAI-
LAND.
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
u
u
Press the rotary control
7
to open the menu.
Turn the rotary control
tween the settings.
Turn the rotary control
tween the reception areas.
7
to change be-
Press the rotary control
setting.
u
Press the rotary control
tion area.
7
to select a recep-
The display shows "PLEASE CONFIRM".
PTY TYPES
u
Press the rotary control
selected reception area.
7
to confirm the
Only possible with activated PTY function: Select
a programme type.
Note:
Making settings in the "DISPLAY"
menu
As soon as a programme type has been select-
ed, this programme type is shown as menu
item in the menu instead of "PTY TYPES".
DIMMER
u
u
u
Press the rotary control
setting.
7
to change the
Select automatic or manual switching of the dis-
play brightness for day or night. Settings: AUTO
(display brightness is automatically switched by
switching the driving lights on or off), MANUAL
(display brightness can be switched manually).
Turn the rotary control
tween the available programme types.
7
to change be-
Press the rotary control
selected programme type.
7
to confirm the
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
PTY LANGUAGE
(only for reception area EUROPE)
Only possible with activated PTY function: Select a
language for the display of the programme types.
Settings: ENGLISH, DEUTSCH (German), FRANCAIS
(French).
Turn the rotary control
tween the settings.
Press the rotary control
setting.
Automatic switching of the display brightness is
possible only If your car sound system is installed as
described in the installation instructions and your
vehicle features the corresponding connection.
u
u
Press the rotary control
7
to open the menu.
Press the rotary control
tween the languages.
7
to change be-
SCROLLING
u
u
Turn the rotary control
guage.
7
to select a lan-
Select the display of scrolling text (e.g. when dis-
playing MP3 file names with more than 15 charac-
ters) either as single display or continued display.
Settings: 1X (single display), ON (continued display).
Press the rotary control
lected language.
7
to confirm the se-
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
Turn the rotary control
tween the settings.
Press the rotary control
setting.
28
User settings
LANGUAGE
(only for Toronto 420 BT)
TRAFFIC VOL (traffic information volume)
(reception area EUROPE only)
Select the language for the display. Settings:
ENGLISH, DEUTSCH (German).
Setting the minimum volume for traffic announce-
ments. Settings: 1 – 50.
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
u
Press the rotary control
setting.
7
to change the
Turn the rotary control
tween the settings.
u
u
Turn the rotary control
7
to set the volume.
to confirm the
Press the rotary control
setting.
7
Press the rotary control
setting.
HANDSFREE VOL
(for Toronto 420 BT only and with connected
cell phone)
Adjusting the level for handsfree volume. Settings:
–5 to +5.
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: ON VOL-
UME (power-on volume; 1 – 50) or LAST VOLUME
(volume set last before switching off the car sound
system).
u
u
u
Press the rotary control
7
7
7
to change the
to set the level
to confirm the
setting.
Turn the rotary control
adjustment.
Press the rotary control
setting.
Danger!
High volume
BEEP (button beep)
Switching the confirmation beep on or off.
Settings: ON, OFF.
The power-on volume can be unex-
pectedly high if the LAST VOLUME setting is se-
lected and a high volume was set the last time the
radio was switched off.
Note:
Always set the device to a moderate volume.
When storing radio stations,
a
confirma-
tion beep sounds even if the OFF setting is
selected.
u
u
Press the rotary control
Turn the rotary control
the menu items "LAST VOLUME" and "ON
VOLUME" (power-on volume).
7
7
to open the menu.
to switch between
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
Turn the rotary control
tween the settings.
Upon selecting "LAST VOLUME":
u
Press the rotary control
setting.
7
to confirm the
to change the
Press the rotary control
setting.
Upon selecting "ON VOLUME":
u
Press the rotary control
setting.
7
u
u
Turn the rotary control
7
to set the volume.
to confirm the
Press the rotary control
setting.
7
29
User settings
Making settings in the "CLOCK" menu Making settings in the "VARIOUS"
menu
PERM CLOCK
Switch the permanent display of the time on or off.
Settings: ON, OFF.
DEMO MODE
Switching the demo mode on or off. Settings:
ON, OFF.
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
Turn the rotary control
tween the settings.
Turn the rotary control
tween the settings.
Press the rotary control
setting.
Press the rotary control
setting.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 15 seconds af-
ter the button is pressed last, the time is displayed
again.
In demo mode, the features of the radio are shown
as scrolling text on the display.
MIX AUX
Switching the combined playback of the AUX
source with another audio source on or off.
Settings: ON, OFF.
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
Turn the rotary control
tween the settings.
Turn the rotary control
tween the settings.
Press the rotary control
setting.
Press the rotary control
setting.
With the AUX MIX ON setting, an audio source
connected to the front AUX-IN socket is played
back simultaneously with the respective active
internal audio source of the car sound system
(e.g. radio or CD).
;
SET
Setting the time.
u
u
u
u
Press the rotary control
7
to change the
setting.
AUX MIX GAIN (AUX MIX Level)
Turn the rotary control
the hours.
7
clockwise to set
Adjusting the level of the AUX source with com-
bined playback of the AUX source and another
audio source (AUX MIX ON). Settings: –5 to +5.
Turn the rotary control
to set the minutes.
7
counter-clockwise
to confirm the
u
u
u
Press the rotary control
7
7
7
to change the
to set the level
to confirm the
Press the rotary control
time set.
7
setting.
Turn the rotary control
adjustment.
Note:
When you set the time in 12-hour mode
(HOUR MODE 12), an "AM" is displayed before
the time for the time before noon or a "PM" for
the time after noon.
Press the rotary control
setting.
This setting allows raising or lowering the level of
the AUX source to adjust it to the level of the other
active audio source.
30
User settings | Factory settings
AUX EDIT
The car sound system switches off and is
reset to the factory settings. If a CD has been
inserted in the CD drive, the car sound system
automatically switches on again.
Entry of an individual 15-digit name for the AUX
source. Possible characters: space, 0 – 9, A – Z.
u
u
Press the rotary control
7
to open the menu.
Press the rotary control
setting.
7
to change the
Factory settings
Important factory settings in the user menu:
For each of the 15 characters:
u
Turn the rotary control
ter.
7
to set the charac-
Menu item
TUNER AREA
FM1 / FM2 / FMT
MW* / LW*
AM** / AMT**
RDS
Factory setting
EUROPE
ON
u
Press the rotary control
setting.
7
to confirm the
You automatically change to the next character
and finally return to the menu.
OFF
OFF
The name entered is shown on the display as soon
as you select the AUX source.
ON
REGIONAL*
TRAFFICINFO*
SENSITIVITY
PTY
OFF
SCAN TIME
Setting the scan time in seconds. Settings:
4/8/12/16/60 SEC.
OFF
HI
u
u
u
Press the rotary control
setting.
7
7
7
to change the
to change be-
to confirm the
OFF
Turn the rotary control
tween the settings.
ON VOLUME
TRAFFIC VOL*
BEEP
LAST VOLUME
20
Press the rotary control
setting.
ON
SCAN TIME
DIMMER
8 SEC
MANUAL
24
VERSION
Displaying the version of the CPU and software
of the radio.
HOUR MODE
CLOCK SET
u
u
Press the rotary control
Turn the rotary control
the display of the version number of CPU (P)
and software (E).
7
to open the menu.
to toggle between
00:00
7
*
Only in reception area "EUROPE"
** Only in reception areas "USA", "SOUTH AMERICA"
and "THAILAND"
NORMSET
In the user menu, you can restore the original
factory settings of the car sound system (see the
chapter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "NORMSET").
Restoring the original factory settings of the car
sound system.
u
Press the rotary control
7.
The display shows "PLEASE CONFIRM".
u
Press the rotary control
the resetting.
7
again to confirm
31
Useful information | Technical data
Wavebands in South America:
Useful information
FM:
87.5 – 107.9 MHz
530 – 1,710 kHz
Warranty
AM (MW):
We provide a manufacturer's warranty for prod-
ucts bought within the European Union. For de-
vices purchased outside the European Union, the
warranty terms issued by our respective responsi-
ble domestic agency are valid. The warranty terms
FM frequency response: 30 – 15,000 Hz
CD
Frequency range:
20 – 20,000 Hz
2 V
Pre-amp out
4 channels:
Service
In some countries, Blaupunkt offers a repair and
pick-up service.
Input sensitivity
Front AUX-IN:
300 mV / 10 kΩ
Information about the availability of this service in
Dimensions and weight
W x H x D:
178 x 50 x 160 mm
approx. 1.70 kg
If you want to take advantage of this service, you
may request a pick-up service for your car sound
system via the Internet.
Weight:
Technical data
Voltage supply
Operating voltage:
10.5 – 14.4 V
< 10 A
Current consumption
In operation:
10 sec. after switch-off: < 3.5 mA
Amplifier
Output power:
4 x 22 watts sine at
14.4 V at 4 ohms.
4 x 50 watts max. power
Tuner
Wavebands in Europe/Thailand:
FM:
87.5 – 108 MHz
AM (MW):
LW (Europe only):
531 – 1,602 kHz
153 – 279 kHz
Wavebands in the US:
FM:
87.7 – 107.9 MHz
530 – 1,710 kHz
AM (MW):
Subject to changes
32
Installation instructions
Installation instructions
Safety instructions
Supplied mounting hardware
1 011 202 320 / 1 011 202 420:
When carrying out installation work and
making connections please observe the following
safety instructions:
•
Disconnect the negative terminal of the bat-
tery! When doing so, please observe the vehi-
cle manufacturer’s safety instructions.
•
•
•
Make sure you do not damage vehicle compo-
nents when drilling any holes.
The cross sections of the positive and negative
cables must not be less than 1.5 mm².
Do not connect the vehicle’s plug connec-
tors to the radio!
You can obtain the adapter cable required
for your vehicle type from any BLAUPUNKT
dealer.
1 011 202 321 / 1 011 202 421:
•
Depending on the model, your vehicle may
differ from the description provided here. We
accept no responsibility for any damages due
to incorrect installation or connection or for
any consequential damages.
If the information provided here is not suita-
ble for your specific installation requirements,
please contact your Blaupunkt dealer, your ve-
hicle manufacturer or our telephone hotline.
When installing an amplifier, you must first con-
nect the device earth connections before con-
necting the plugs for the line-out jacks.
Earth connection of external devices may not
be connected to earth of car sound system
(housing).
33
Installation instructions
1.
Available as an optional accessory
12V
7 607 621 …
2.
Installation kits
7 608 … …
3.
0° - 30°
+/– 10°
+/– 10°
34
Installation instructions
4.
6. Removal
1.
Antenna
Antenna
connection
2.
3.
1.
2.
Preamp Out (4x)
Rear USB
Microphone In
(Bluetooth®, Toronto 420 BT only)
5.
182
165
53
1-20
7.
12V
35
Installation instructions
C-1 C-2 C-3
1
4
7
10
13 16
19
15 18
14 17 20
3
6
9
12
C
B
A
2
5
8
11
Aut. antenna / Amplifier +12V
Remote Control +12V
*
1
3
4
5
6
7
2
8
10 Ampere
1
3
4
5
6
7
8
max. 150 mA
2
A
B
1
2
3
4
5
6
7
8
Sub Out GND
Radio Mute
Sub Out
1
2
3
4
5
6
7
8
Speaker out RR+
Speaker out RR–
Speaker out RF+
Speaker out RF–
Speaker out LF+
Speaker out LF–
Speaker out LR+
Speaker out LR–
Permanent +12V
Aut. antenna +12V *
Illumination
Kl.15/Ignition
Ground
C1
NC
NC
NC
NC
NC
NC
C2
C3
NC
NC
NC
NC
NC
NC
NC
NC
1
2
3
4
5
6
7
8
Telephone AF +
Telephone AF –
Radio Mute
13
14
15
16
17
18
19
20
9
10
11
12
Remote Control +12V *
Remote Control IN
Remote Control GND
36
Installation instructions
Relais
+12V
Sub Out GND Sub Out
7
5
3
4
1
Kl. 15 +12V
8
6
2
Radio Mute
4 Ohm
4 Ohm
4 Ohm
4 Ohm
+12V
12V
Subject to changes!
37
Supported iPod/ iPhone devices
Our product can support below listed iPod/ iPhone generations:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPod
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone respectively, and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards.
Please note that the use of this accessory with iPod, iPhone may affect wireless performance.
iPhone, iPod are trademarks of Apple Inc., registered in the U.S. and other countries.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such
technology outside of this product is prohibited without a license from Microsoft.
©
2012 All rights reserved by Blaupunkt. This material may be reproduced, copied or distributed for
personal use only.
38
Please keep the filled-in radio pass in a safe place!
39
Passport
Name:
......................................................................................................................
1 011 202 _ _ _
Type:
......................................................................................................................
Serial no.:
BP ...............................................................................................................
Blaupunkt AudioVision GmbH & Co. KG
Robert-Bosch-Straße 200
D-31139 Hildesheim
01/12
|