Contents
Thank you for purchasing this Clarion product.
• Please fully read this owner’s manual before operating this equipment.
• Check the contents of the enclosed warranty card and store it in a safe place with this manual.
1. FEATURES ........................................................................................................................ 3
2. PRECAUTIONS ................................................................................................................. 4
Front Panel / Generalities.................................................................................................. 4
Remove the DCP .............................................................................................................. 5
Attach the DCP.................................................................................................................. 5
Storing the DCP in the DCP Case..................................................................................... 5
3. CONTROLS ....................................................................................................................... 6
Operational Panel.............................................................................................................. 6
Names of Buttons.............................................................................................................. 6
4. CAUTIONS ON HANDLING .............................................................................................. 7
Handling Discs .................................................................................................................. 7
5. OPERATIONS.................................................................................................................... 8
Basic Operations............................................................................................................... 8
System Setup.................................................................................................................... 9
Audio Setup....................................................................................................................... 9
Radio Operations ............................................................................................................ 10
Radio Data System Operations....................................................................................... 11
CD/MP3/WMA Operations .............................................................................................. 12
AUX Operations .............................................................................................................. 14
6. TROUBLE SHOOTING.................................................................................................... 15
7. ERROR DISPLAYS.......................................................................................................... 16
8. SPECIFICATIONS ........................................................................................................... 17
9. INSTALLATION / WIRE CONNECTION GUIDE ............................................................. 18
2
1. FEATURES
MP3/WMA compatible with ID3-TAG display
Front-panel auxiliary input & 2ch RCA output
"BEAT-EQ" with 3 Band Parametric Equalizer & "MAGNA BASS EX" dynamic bass
enhancement
Expanding Systems
Expanding audio features
2 Channel Amplifier
Portable Player
(Connect by AUX IN Jack)
Note:
The items listed outside of the frames are
the commercial products generally sold.
3
2. PRECAUTIONS
WARNING
For your safety, the driver should not operate the controls while driving.
Also, while driving, keep the volume to a level at which external sounds can be heard.
1. When the inside of the car is very
Front Panel / Generalities
cold and the player is used soon after
switching on the heater, moisture may
form on the disc or the optical parts of the
player and proper playback may not be
possible. If moisture forms on the disc,
wipe it off with a soft cloth. If moisture
forms on the optical parts of the player,
do not use the player for about one hour.
The condensation will disappear naturally
allowing normal operation.
For a longer service life, be sure to read the
following cautions.
•
Do not allow any liquids on the set from
drinks, umbrellas, etc. Doing so may
damage the internal circuitry.
•
•
Do not disassemble or modify the set in
any way. Doing so may result in damage.
Do not let cigarettes burn the display.
Doing so may damage or deform the
body.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the
sound to skip.
•
If a problem should occur, have the set
inspected at your store of purchase.
3. This unit uses a precision mechanism.
Even in the event that trouble arises,
never open the case, disassemble the
unit, or lubricate the rotating parts.
Cleaning the body
•
Use a soft, dry cloth and gently wipe off
the dirt.
•
For tough dirt, apply some neutral
detergent diluted in water to a soft cloth,
wipe off the dirt gently, then wipe again
with a dry cloth.
•
Do not use benzene, thinner, car cleaner,
etc., as these substances may damage
the body or cause the paint to peel. Also,
leaving rubber or plastic products in
contact with the body for long periods of
time may cause stains.
4
Remove the DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store
it in the DCP (DETACHABLE CONTROL
PANEL) case to prevent scratches.
We recommend taking the DCP with you
when leaving the car.
1. Press the [SRC / ] button (1 sec.) to turn
off the power.
2. Deeply push in [OPEN] button to unlock
the DCP.
3. Hold the side popped out, remove the
DCP.
Attach the DCP
1. Hold the DCP and ensure that the panel
faces towards you. Set the right side of the
DCP into the DCP bracket.
2. Press the left side of the DCP until it locks.
Storing the DCP in the DCP Case
Hold the DCP, as shown in the figure below,
and put it into the supplied DCP case.
•
CAUTION
The DCP can easily be damaged by
shocks. After removing it, be carefully not
to drop it or subject it to strong shocks.
Once the [OPEN] button is pressed and
DCP is unlocked, car vibrations can cause
the DCP to fall
DCP
•
•
The connector for the main unit and
DCP is extremely important. Be careful
not to damage it by pressing on it with
fingernails, screwdrivers, etc.
DCP case
Note:
If the DCP is dirty, wipe off the dirt with a soft,
dry cloth only.
5
3. CONTROLS
Operational Panel
[MENU] [PS/AS]
Disc Slot
[
]
E
TA
[
,
]
[OPEN]
[BAND]
[VOLUME]
[SOUND]
[1~6]
AUX Jack
[D]
[TA]
[SRC/
]
Names of Buttons
[SRC / ] Button
[VOLUME] Knob
• Power / Toggle the audio source
• Adjust volume level / Confirm (press)
[BAND] Button
[TA] Button
• Select tuner band
• Traffic announcement
[MENU] Button
[1~6] Buttons
• MP3/WMA mode – Search function.
• CD mode – No function.
• RADIO mode – PTY select
• AUX mode – No function.
• [1] Button: Scan play / Preset station 1.
• [2] Button: Repeat play / Preset station 2.
• [3] Button: Random play / Preset station 3.
• [4] Button: Play / Pause / Top play (long
press) / Preset station 4.
[
] Button
• [5] Button: Previous folder / Preset station 5.
10 tracks down (long press)
• Press to eject disc.
• [6] Button: Next folder / Preset station 6.
10 tracks up (long press)
[
,
] Buttons
• Previous / next track
• Search (Long press)
[D] Button
• Display switch
[Open] Button
• System setup (long press)
• Unlock the front panel.
[PS / AS] Button
• Scan play / Preset scan
• Auto memory store (long press)
[SOUND] Button
• Sound effect setting
6
4. CAUTIONS ON HANDLING
Handling Discs
Handling
Storage
•
New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound may
skip. Use a ball-point pen or the like to
remove any roughness from the edge of
the disc.
•
•
•
Do not expose discs to direct sunlight or
any heat source.
Do not expose discs to excess humidity or
dust.
Do not expose discs to direct heat from
heaters.
Cleaning
Ball-point pen
Roughness
•
•
•
To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the
center of the disc to the circumference.
Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean discs.
After using special disc cleaner, let the disc
dry off well before playing it.
On Discs
•
•
Never stick labels on the surface of the disc
or mark the surface with a pencil or pen.
Never play a disc with any cellophane tape
or other glue on it or with peeling off marks.
If you try to play such a disc, you may not
be able to get it back out of the player or it
may damage the player.
Do not use discs that have large
scratches, are misshapen, cracked, etc.
Use of such discs may cause
•
Never turn off the power and remove the
unit from the car with a disc loaded.
CAUTION
For your safety, the driver should not insert
or eject a disc while driving.
•
•
•
misoperation or damage.
To remove a disc from its storage case,
press down on the center of the case and
lift the disc out, holding it carefully by the
edges.
Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
7
5. OPERATIONS
Basic Operations
Note:
Volume adjustment
• Refer to the diagrams in “3. CONTROLS”
when reading this chapter.
Turn the [VOLUME] knob on the front panel.
The adjustable range of volume is 0 to 40.
CAUTION
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume
raised to the maximum level may harm
your hearings.
While driving, keep the volume level at
which external sounds can be heard.
Be careful about adjusting the volume.
Playing source selection
Press [SRC / ] button on the front panel
repeatedly to choose desired playing source.
Power on / off
Notes:
•
•
Start the engine before using this unit.
Be careful about using this unit for a long
time without running the engine. If you
drain the car’s battery too far, you may not
be able to start the engine and this can
reduce the service life of the battery.
Notes:
•
Playing source selection means selecting
work mode, such as DISC mode, RADIO
mode and AUX mode.
Display system time
1. Start the engine. The power button / knob
illumination on the unit will light up.
Press the [D] button on the front panel to
switch the display information between RDS
information, system time and playing source.
Engine ON
position
RESET
Note:
2. Press the [SRC / ] button on the front
panel to turn on the power under standby
mode. The unit goes back to the last
status after power on.
*
When the [RESET] button is pressed,
frequencies of radio stations, titles, etc.
stored in memory are cleared.
3. Press and hold the [SRC / ] button on
the front panel to turn off the power.
CT (Clock Time) display
• The displayed clock data is based on the
CT (clock time) data in the RDS signal.
RESET
8
System Setup
At all mode, press and hold [D] button to
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
TAG information by press [BAND] button.
enter system setup. Press [
,
] buttons
to select options, rotate the [VOLUME] knob
to adjust.
AF: ON/OFF
DIMMER: ON/OFF
Rotate the [VOLUME] knob to choose AF ON
or OFF.
Rotate the [VOLUME] knob to choose
DIMMER ON or OFF.
•
ON: LCD dimmer is active when small light
of vehicle is turned ON.
• OFF: LCD always maximum brightness
REG: ON/OFF
Rotate the [VOLUME] knob to choose REG
ON or OFF.
regardless of the vehicle small light.
DX/LO (RADIO mode)
REAR/S-W
Rotate the [VOLUME] knob to choose radio
local or distant at RADIO mode.
Rotate the [VOLUME] knob to choose REAR
or S-WOOFER (SUB-WOOFER).
•
LO: Only stations with strong signal can
be received.
DX: Stations with strong and weak signals
TEL-SW
•
Rotate the [VOLUME] knob to choose MUTE,
can be received.
ON or OFF.
•
MUTE:
AUX SENS (AUX mode)
The sound from this unit is muted during
telephone calls.
Rotate the [VOLUME] knob to choose AUX
Input sensitivity LOW, MID or HIGH at AUX
mode.
•
OFF:
This unit continues normal operation even
when the cellular phone is used.
SCRN SVR: ON/OFF
•
ON:
Rotate the [VOLUME] knob to choose SCRN
SVR (screen saver) ON or OFF.
You can listen to your telephone calls from
the speakers connected to this unit.
*When listening to your calls on your car
speakers, you can adjust the volume by
turning the [VOLUME] knob.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: TRACK-
>FOLDER->FILE->ALBUM->TITLE-
>ARTIST->TRACK->...
BEEP: ON/OFF
Rotate the [VOLUME] knob to choose button
beep sound ON or OFF.
Audio Setup
Press the [SOUND] button to enter sound
effect setting mode. First press shows current
EQ. Rotate the [VOLUME] knob to changes
BEAT EQ in this order:
it including: BAS-G -> BAS-F -> BAS-Q
-> MID-G -> MID-F -> MID-Q -> TRE-G ->
TRE-F, rotate the [VOLUME] knob to select a
value.
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
BAS-G / MID-G / TRE-G: (-7)- (+7)
BAS-F: 60 / 80 / 100 / 200
BAS-Q: 1.0 / 1.25 / 1.5 / 2.0
Rotate the [VOLUME] knob to changes
CUSTOM, and press the [VOLUME] knob,
MID-F: 500 / 1K / 1.5K / 2.5K
MID-Q: 0.5 / 0.75 / 1.00 / 1.25
TRE-F: 10.0K / 12.5K / 15.0K / 17.5K
the press [
] or [
] button to select
9
Audio Setup
Press the [SOUND] button, then press [
,
BALANCE:LEFT 1-7->CENTER->RIGHT 1-7
FADER:FRONT 1-7->CENTER->REAR 1-7
M-BEX: ON/OFF
LPF: THROUGH/80/120/160
SUBW VOL: (-6)-(+6)
] buttons to select USER preset including:
BALANCE -> FADER -> M-B EX -> LPF(low
pass filter) -> S-W VOL (Subwoofer Volume),
rotate the [VOLUME] knob to select a value.
Radio Operations
Select tuner as playing source
Auto store
Press [SRC / ] button once or more to
enter RADIO mode.
Only stations with sufficient signal strength
will be detected and stored in the memory.
Press and hold the [PS/AS] button (1 sec.) to
start automatic station search.
To stop auto store, press other buttons
having radio functions.
Select one radio band
Press the [BAND] button on the panel to
select one radio band among FM1, FM2,
FM3, MW and LW.
Notes:
1. After auto store, the previous stored
stations will be overwritten.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
2. The unit has 5 bands, such as FM1,
FM2, FM3, MW, LW. FM3 and MW, LW
can store by AS function. Each bands
can store 6 stations, CZ101E/CZ101ER/
CZ101EG can store 30 stations in total.
Press the [
] / [
] buttons on the
panel to tune in a higher / lower station.
Auto tuning
Manual store
Press and hold the [
] / [
] buttons
on the panel to seek a higher / lower station.
To stop searching, repeat the operation
above or press other buttons having radio
functions.
When one expected radio station has been
detected, press and hold number button 1-6
to store it in the memory.
Note:
Recall the stored stations
When a station is received, searching stops
and the station is played.
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station in
memory.
Local seeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press and
hold the [D] button on the front panel, then
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
press [
] button repeatedly until LO or
DX displays on the screen, and rotate the
[VOLUME] knob to select Local or Distant
mode.
Note:
•
Be careful not to press and hold the
[PS/AS] button for 1 second or longer,
otherwise the auto store function will begin
and the unit starts storing stations.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.
10
Radio Data System Operations
Radio Data System
Note:
This function can be used when a regional
broadcast of the same network is received.
This unit has a built-in “Radio Data System”
decoder system that supports broadcast
stations transmitting “Radio Data System”
data.
When using the “Radio Data System”
function, always set the radio to FM mode.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so
you can listen to it. Traffic programme (TP)
automatic tuning is also available.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
* The factory default setting is ON.
1. Set to system setup by long pressing [D]
button.
*
This function can only be used when
“TP” appears in the display. When “TP”
appears, this means that the “Radio Data
System” broadcast station being received
has traffic announcement programmes.
2. Press the [
] or [
] button to select
“AF”.
Setting the TA standby mode
3. Rotate the [VOLUME] knob to select ON
or OFF.
• AF ON:
“AF” indicator appears in the display and
AF function turns on.
If you press the [TA] button, “TA” lights in
the display and the unit is set into the TA
standby mode until a traffic announcement
is broadcast. When a traffic announcement
broadcast starts, “TRAF INF” appears in the
display. If you press the [TA] button while
a traffic announcement broadcast is being
received, the traffic announcement broadcast
reception is cancelled and the unit goes into
the TA standby mode.
• AF OFF:
“AF” indicator disappears in the display
and AF function turns off.
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for
that region is received.
Cancelling the TA standby mode
As “TA” lits in the display, press the [TA]
button. The “TA” in the display goes off and
the TA standby mode is cancelled.
* The factory default setting is ON.
PTY (Programme Type)
Notes:
This function enables you to listen to a
broadcast of the selected programme type
even if the unit is on a function mode other
than radio.
•
This function is disabled when a national
station such as BBC R2 is being received.
The REG function ON/OFF setting is valid
when the AF function is ON.
•
*
Some countries do not yet have PTY
broadcast.
1. Set to system setup by long pressing [D]
button.
*
In the TA standby mode, a TP station has
priority over a PTY broadcast station.
2. Press the [
] or [
] button to select
“REG”.
3. Rotate the [VOLUME] knob to select ON
or OFF.
Selecting PTY
Press [MENU] button, then rotate the
[VOLUME] knob to select PTY type,
press the [VOLUME] knob, the unit begin
searching.
Manually tuning a regional station
in the same network
This function is valid when the AF function is
ON and the REG function is OFF.
11
CD/MP3/WMA Operations
byte alphabetical letters and numerals
(including an extension).
3. Do not affix a name to a file inside a folder
having the same name.
This unit can play back MP3/WMA
files
Notes:
• If you play a WMA file with active DRM
(Digital Rights Management), no audio is
output.
Folder structure
A disc with a folder having more than 8
hierarchical levels will be impossible.
To disable DRM
(Digital Rights Management)
Number of files or folders
1. Up to 999 files can be recognized per
folder.
Up to 999 files can be played.
2. Tracks are played in the order that they
were recorded onto a disc. (Tracks
may not always be played in the order
displayed on the PC.)
When using Windows Media Player 9/10/11,
click on Tool -> Options -> Copy music tab,
then under Copy settings, unclick the Check
box for Copy protect music. Then, reconstruct
files.
Personally constructed WMA files are used
at your own responsibility.
3. Some noise may occur depending on
the type of encoder software used while
recording.
Precautions when creating MP3/
WMA file
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps / VBR
Eject function
Just pressing the [
] button, ejects the disc.
2. WMA: Bit rate 8 kbps-320 kbps
Notes:
•
If you force a CD into before auto
File extensions
reloading, this can damage the CD.
If a CD (12 cm) is left ejected for 15
seconds, the CD is automatically reloaded
(Auto reload).
1. Always add a file extension “.MP3”,
“.WMA” to MP3, WMA file by using single
byte letters. If you add a file extension
other than specified or forget to add the
file extension, the file cannot be played.
2. Files without MP3/WMA data will not play.
The files will be played soundlessly if you
attempt to play files without MP3/WMA
data.
* When VBR files are played, the play time
display may differ the play location.
* When MP3/WMA files are played, a little
no sound part is caused between tunes.
•
Listening to a disc already loa
ded in the unit
Press the [SRC / ] button to select the CD/
MP3/WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
Logical format (File system)
Loading a CD
1. When writing MP3/WMA file on a CD-R
disc or CD-RW disc, please select
“ISO9660 level 1, 2 or Joliet or Romeo” or
Apple ISO as the writing software format.
Normal play may not be possible if the
disc is recorded on another format.
2. The folder name and file name can be
displayed as the title during MP3/WMA
play but the title must be within 32 single
Insert a CD into the center of the CD
SLOT with label facing up. The CD plays
automatically after loading.
Notes:
•
Never insert foreign objects into the CD
SLOT.
•
If the CD is not inserted easily, there may
be another CD in the mechanism or the
unit may require service.
12
CD/MP3/WMA Operations
Fast-forward/Fast-reverse
Fast-forward
•
•
Discs without the
or
mark and
TEXT
CD-ROMs cannot be played by this unit.
Some CD-R/CD-RW discs may not be
usable.
Press and hold the [
Fast-reverse
] button .
Press and hold the [
] button .
* For MP3/WMA discs, it takes some time
until the start of searching and between
tracks. In addition, some error may occur in
the play time.
Pausing play
1. Press the [ 4 ] button to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press the [ 4 ] button
again.
Folder Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
Displaying CD titles
This unit can display title data for MP3/WMA
disc.
When SCROLL is OFF, each time you press
the [BAND] button to change the title display.
1. Press the [ 5 ] or [ 6 ] button.
Press the [ 6 ] button to move the next
folder. Press the [ 5 ] button to move the
previous folder.
2. To select a track, press the [
button.
] or [
]
MP3/WMA disc
Track -> Folder -> File title -> Album -> Title
-> Artist -> Track ...
Search Function
Notes:
1. Press the [MENU] button to enter FOLD
SCH mode. Press the [VOLUME] button
to enter the folder list search mode.
2. Turn the [VOLUME] knob to select a folder.
3. Press the [VOLUME] button to enter the
file list search mode. And then the track
list appears in the display.
•
If MP3/WMA disc is not input TAG, “NO
TITLE” appears in the display.
Only ASCII characters can be displayed in
Tags.
•
Selecting a track
Track-up
1. Press the [
the beginning of the next track.
2. Each time you press the [
4. Turn the [VOLUME] knob to select a track.
5. Press the [VOLUME] knob to play.
] button to move ahead to
*
When play back MP3 / MWA file, this
function is performed in the current folder.
] button, the
track advances ahead to the beginning of
the next track.
3. For MP3/WMA disc, press and hold the
[6] button (1 sec.) to move ahead to +10
tracks.
Top function
The top function resets the CD player to the
first track of the disc. Press and hold the [ 4 ]
button (1 sec.) to play the first track (track No.
1) on the disc.
Track-down
*
In case of MP3/WMA, the first track of the
current folder will be played.
1. Press the [
] button to move back to
the beginning of the current track.
2. Press the [
] button twice to move back
to the beginning of the previous track.
3. For MP3/WMA disc, press and hold the [5]
button (1 sec.) to move back to -10 tracks.
13
CD/MP3/WMA Operations
MP3/WMA:
Other various play functions
1. Press the [ 2 ] button once or more until
“TRACK RPT” appears on the display to
perform repeat play, and “RPT” segment
lights on.
Scan play
This function allows you to locate and play
the first 10 seconds of all the tracks recorded
on a disc.
2. For MP3/WMA files, press [ 2 ] button
repeatedly until “FOLDER RPT” appears
on the display for folder repeat play.
3. Press [ 2 ] button repeatedly until “RPT
OFF” appears on the display to cancel
repeat playback, and “RPT” segment goes
off.
Press the [ 1 ] button to perform scan play.
Repeat play
This function allows you to play the current
track repeatedly or play a track currently
being played in the MP3/WMA folder
repeatedly.
CD:
Random play
1. Press the [ 2 ] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2. Press [ 2 ] button repeatedly until “RPT
OFF” appears on the LCD to cancel repeat
playback.
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [ 3 ] button to perform random play.
AUX Operations
Press [SRC / ] button on the panel to select
“AUX”.
AUX is just for audio content with 3.5mm
Jack connector plugged into audio-in socket
on the front panel.
AUX Input sensitivity setting
1. Press and hold the [D] button (1 sec.).
2. Turn the [VOLUME] knob to select “AUX
SENS”.
3. If the output level of connected external
audio player is “HIGH”, rotate [VOLUME]
knob and choose “LOW”. And if the output
level is “LOW”, choose “HIGH”.
14
6. TROUBLE SHOOTING
GENERAL
Problem
Cause
Unit fuse blown.
Measure
Replace with new fuse of correct rating.
Replace with new fuse of correct rating.
Unit can not
power on.
Car battery fuse blown.
Turn off the power and remove the DCP.
Press the [RESET] button with a thin rod.
Unit can not
power on.
Note:
Nothing happens
when buttons are
pressed.
When the [RESET] button is pressed, turn
The microprocessor has
off the ACC power.*
malfunctioned due to noise, etc.
Display is not
accurate.
* When the [RESET] button is pressed,
frequencies of radio stations, titles, etc.
stored in memory are cleared.
Improper audio output
connection.
Check wiring and correct.
Volume set too low.
Increase volume level.
Replace speakers.
No/low audio
Speakers damaged.
output.
Adjust the channel balance to center
position.
Heavily biased volume balance.
Speaker wiring is in contact with
Insulate all speaker wiring connections.
Use a standard disc.
metal part of car.
Non-standard disc used.
Speaker power rating does not
Poor sound
quality or
Replace speakers.
match unit.
distortion.
Wrong connections.
Check wiring and correct.
Check wiring and correct.
Speaker is shorted.
Tel-Mute
MUTE wire is grounded.
Check the MUTE wiring and correct.
malfunction.
Unit resets itself
when engine
is off.
Incorrect connection between
ACC and Battery.
Check wiring and correct.
15
DISC Player
Problem
Cause
Measure
Eject the disc before loading the new
one.
Another disc is already loaded.
Disc cannot be
loaded.
There is an object install inside
the unit.
Remove the object inside the unit.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Sound skips or is
noisy.
Compact disc is heavily scratched Replace with a compact disc with no
or warped.
scratches.
Sound is bad
Condensation may form on the
when power is first internal lens when the car is
Let dry for about 1 hour with power on.
turned on.
parked in a humid place.
7. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display
Cause
Measure
Disc is inserted incorrectly.
Eject the disc then reload it properly.
ERROR 3
The disc format is not supported.
Try another disc.
ERROR 5
This is a failure of deck’s mechanism. Consult your store of purchase.
If an error display other than the ones described above appears, press the [RESET] button. If
the problem persists, turn off the power and consult your store of purchase.
*
When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
16
8. SPECIFICATIONS
FM Tuner
General
Frequency range: 87.5-108.0MHz
Usable sensitivity: 8dBμ
Power supply voltage:
14.4VDC (10.8 to 15.6V allowable),
negative ground
Pre-Amp output voltage:
2.0V (CD play mode: 1kHz, 0dB, 10k load)
Fuse: 15A
Frequency response: 30Hz-15kHz
Stereo separation: 30dB(1kHz)
Signal/noise ratio: >55dB
Dimensions of the Main Unit:
188mm Width × 58mm Height × 190mm Depth
Weight of the Main Unit: 1.30kg
MW Tuner
Frequency range: 531-1602kHz
Usable sensitivity (S/N=20dB): 30dBμ
LW Tuner
Frequency range: 153-279kHz
Usable sensitivity (S/N=20dB): 30dBμ
CD Player
System: Disc digital audio system
Frequency response: 20Hz-20kHz
Signal/noise ratio: >94dB
Total harmonic distortion: Less than 0.1% (1kHz)
Channel separation: >60dB
Notes:
•
Specifications and design are subject
to change without notice for further
improvement.
MP3/WMA mode
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO9660 level 1,2
Joliet or Romeo file system
Audio Amplifier
Maximum power output:
180W (45W x 4)
Speaker impedance: 4 (4 to 8 allowable)
Input
Audio input sensitivity:
High: 320mV (at 1V output)
Mid: 650mV (at 1V output)
Low: 1.3V (at 1V output)
(input impedance 10 k or greater)
Aux-in level: ≤2V
17
9. INSTALLATION / WIRE
CONNECTION GUIDE
CONTENTS
1) Before Starting ...................................................................... 18
2) Package Contents................................................................. 18
3) General Cautions .................................................................. 18
4) Cautions on Installation......................................................... 19
5) Installing the Source Unit ...................................................... 19
6) Removing the Source Unit .................................................... 21
7) Wiring and Connections........................................................ 22
8) Connecting the Accessories.................................................. 23
1) Before Starting
1. This set is exclusively for use in cars with a
negative ground 12 V power supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery “terminal”
before starting. This is to prevent short circuits
during installation. (Figure 1)
Car battery
Figure 1
2) Package Contents
Source unit .......................................... 1
Front panel .......................................... 1
Trim ring .............................................. 1
Mounting bracket................................. 1
Special screw (M4x42) ........................ 1
Screws M5x6 mm................................ 4
Rubber cap.......................................... 1
L-key.................................................... 2
Wire connector .................................... 1
DCP case ............................................ 1
Owner’s manual................................... 1
Warranty card...................................... 1
Special screw (Front panel lock) ......... 1
3) General Cautions
1. Do not open the case. There are no
user serviceable parts inside. If you
drop anything into the unit during
installation, consult your dealer or an
authorized Clarion service center.
2. Use a soft, dry cloth to clean the case.
Never use a rough cloth, thinner,
benzine, or alcohol etc. For tough dirt,
apply a little cold or warm water to a
soft cloth and wipe off the dirt gently.
18
4) Cautions on Installation
1. Prepare all articles necessary for
installing the source unit before
starting.
your car dealer beforehand.
4. Use the enclosed screws for
installation.
2. Install the unit within 30° of the
horizontal plane. (Figure 2)
Using other screws can cause
damage.
3. If you have to do any work on the car
body, such as drilling holes, consult
(Figure 3)
Chassis
Chassis
Damage
Max 30˚
Max. 6 mm (M5 screw)
Figure 3
Figure 2
5) Installing the Source Unit
1. Place the mounting bracket into the instrument panel, use a screwdriver to bend
each stopper of the mounting bracket inward, then secure the stopper.
2. Wire as shown in Section 7) .
3. Insert the source unit into the mounting bracket until it locks.
4. Take care of the top and bottom of the trim ring and mount it so that all the hooks
are locked.
Notes:
1. Some car models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
2. Fasten the front stopper securely to prevent the source unit from coming loose.
• Console opening dimensions
(182 mm)
Hole
19
positive pole first and then the negative
pole.
7. DO NOT block the cooling fan exit to
ensure sufficient heating dissipation of this
unit, or it may result in damage to this unit.
Notes of installation
1. Before installation, please make sure
proper connections are conducted and
the unit operates normally. Improper
connection may result in damage to the
unit.
2. Use only accessories designed and
manufactured for this unit and other
unauthorized accessories may result in
damage to the unit.
3. Before installation, please fasten all power
cables.
4. DO NOT install the unit in the place where
close to hot area to prevent damage to
electrical components such as the laser
head.
Unit Installation
Method A
1. Insert mounting bracket into dash board,
choose appropriate mounting tab according
to the gap width, bending the mounting
tab outwards with a screwdriver to fix the
mounting bracket in place.
2. Screw in 1 piece of M4×42 to the hole of
the unit back and put on a rubber cap over
the screw. (see picture below)
5. Install the unit horizontally. Installing the
unit more than 30 degree vertically may
result in worse performance.
3. Slide the unit into the bracket until you hear
a click sound.
6. To prevent electric spark, connect the
Screwdriver
Dashboard
Rubber Cap
Special Screw
Mounting Bracket
20
Method B
6) Removing the Source Unit
Disassemble trim ring
1. Push the trim ring to right and pull out the
right part.
M5x6
2. Push the trim ring to left and pull out the
left part.
Dashboard
Mounting Frame
1. Insert this unit directly to the opening of
the dashboard.
2. Place M5×6 cylindrical screw through the
holes of the mounting frame located inside
the opening to holes of the unit and fasten
the screws to left & right.
Disassemble the unit
1. Switch off the power.
2. Remove the panel.
3. Remove the trim ring.
4. Insert the removal keys straight back until
they lock, then pull the unit out.
Trim Ring Installation
Attach the trim ring around the front panel.
5. Disconnect all the wires.
21
7) Wiring and Connections
White
Red
Black
Black
Rear audio output (Left) /
Subwoofer output 1
Rear audio output (Right) /
Subwoofer output 2
Black
Black
Steering wheel
control terminal
2 Channel Amplifier
Fuse 15A
Antenna
(Black)
C
B
1
3
5
7
A
2
4
6
8
1
2
4
6
8
3
5
7
Refer to next page
22
A
1
3
5
7
Rear right -
Front right -
Front left +
Rear left +
16
14
12
10
8
6
4
2
2
4
6
8
AMP Remote
ACC +
Ground
C
B
Rear right +
Front right +
Front left -
Rear left -
Illumination
Phone Mute
15
13
11
9
7
5
1
3
5
7
2
4
6
8
3
1
Battery +
Function
Location
Connector A
Connector B
Phone Mute / Brown
Rear right (+) / Purple
Rear right (-) / Purple with black stripe
Front right (+) / Gray
Battery 12V(+) / Yellow
Remote On / Blue with white stripe
Illumination / Orange with white stripe
ACC+ / Red
Front right (-) / Gray with black stripe
Front left (+) / White
Front left (-) / White with black stripe
Rear left (+) / Green
Ground / Black
Rear left (-) / Green with black stripe
Yellow
Red
Yellow
Red
For VW and Audi: Change wiring like above.
8) Connecting the Accessories
• Connecting to the external amplifier
External amplifiers can be connected to the 2 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
23
English:
Español:
Declaration of conformity
Declaración de conformidad
We Clarion declares that this model CZ101E is
following the provision of Directive 1999/5/EC with
the essential requirements and the other relevant
regulations.
Clarion declara que este modelo CZ101E cumple
con los requisitos esenciales y otras disposiciones
aplicables descritos en la Directiva 1999/5/CE.
Svenska:
Français:
Intyg om överensstämmelse
Déclaration de conformité
Härmed intygar Clarion att denna modell CZ101E
uppfyller kraven i direktiv 1999/5/EG gällande
väsentliga egenskaper och övriga relevanta
bestämmelser.
Nous, Clarion, déclarons que ce modèle CZ101E
est conforme aux exigences essentielles et aux
autres dispositions pertinentes de la directive
1999/5/CE.
Polski:
Deutsch:
Deklaracja zgodności
Konformitätserklärung
Firma Clarion niniejszym oświadcza, że model
CZ101E jest zgodny z istotnymi wymogami oraz
innymi odpowiednimi postanowieniami Dyrektywy
1999/5/WE
Wir, Clarion, erklären, dass dieses Modell CZ101E
den Bestimmungen der Richtlinie 1999/5/EG im
Hinblick auf die grundlegenden Anforderungen und
andere relevante Bestimmungen entspricht.
Ελληνικά:
Italiano:
Δήλωση συμμόρφωσης
Dichiarazione di conformità
Εμείς στην Clarion δηλώνουμε ότι αυτό το μοντέλο
CZ101E τηρεί τις διατάξεις της Οδηγίας 1999/5/ΕΚ
σχετικά με τις ουσιώδεις απαιτήσεις και τους άλλους
σχετικούς κανονισμούς.
Clarion dichiara che il presente modello CZ101E
è conforme ai requisiti essenziali e alle altre
disposizioni pertinenti stabiliti dalla direttiva 1999/5/
CE.
Italy
Dichiarazione di conformità:
Nederlands:
Io mandatario nell’ UE: Clarion Europe S.A.S.
Z.I. du Pré à Varois, Route de Pompey, 54670
Custines, Francia Dichiaro che il prodotto
CZ101E è conforme al DM 28-08-1995
ottemperando alle prescrizioni dei DM
25-06-1985 e DM 27-08-1987.
Conformiteitsverklaring
Clarion verklaart dat het model CZ101E in
overeenstemming is met de essentiële eisen en
andere relevante voorschriften van de bepalingen
van Richtlijn 1999/5/EC.
Ministerial authorization FI DM 27-08-1987 nº of
protocol: 0053639 date 13/07/2010
Clarion Europe S.A.S.
Z.I. du Pré à Varois, Route de Pompey, 54670 Custines, FRANCE (Γαλλία)
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2010: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Gedruckt in China
Stampato in Cina / Gedrukt in China / Impreso en China
Tryckt i Kina / Wydrukowano w Chinach / Εκtυpώθηκe stην Κίνa
PN: 127075002837
|