User manual
Bluetooth Headset
English
1. Check phone compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Charge Jabra BT250v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Read the glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. “Pair” to your Bluetooth™ phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. Turning on/off call alert vibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. Turning headset on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. Choosing wearing preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8. Making a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9. Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10. Answering a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11. Call-waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4
5
6
6
7
8
8
9
9
9
12. Resetting the headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
13. Tips for Nokia Bluetooth phones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
14. Enhanced features (for Bluetooth phones with hands-free profiles) . . . . . . . 10
15. Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
16. Need more help?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
17. Storage of headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
18. Certification and safety approvals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
19. Warranty and parts replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
20. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PART NUMBER 82-00383
2
3
5. Unplug the AC adaptor from the charging cradle.
Jabra BT250v Overview
6. Remove the headset from the charging cradle. You are now ready to “pair” Jabra
BT250v to your mobile phone. If the headset has already been paired to your phone,
then you can begin using it.
1
2
1
2
3
4
5
Blue Indicator Light
Multi-Function Button
Volume Control Button
Charging Cradle
WARNING: Do not attempt to charge Jabra BT250v with anything other than the AC
adaptor provided. Using another AC adaptor may damage or destroy the headset.
4
5
1
™
MiniGel
3
4
3
6
4
2
STOP: BEFORE USING YOUR HEADSET
5
Check phone compatibility
Fig. 1
1
1
The Jabra BT250v is compatible with most Bluetooth (see Glossary) phones that are
IMPORTANT: The blue indicator light will be on while charging and will turn off
when charging is complete. Removing the headset from the charging cradle while it’s
charging will put the headset into standby mode and stop the charging sequence.
compliant with Bluetooth version 1.1 or higher specification and support the headset
2
and/or hands-free profile(s) . Ensure that your phone has Bluetooth capability by either
IMPORTANT: Jabra BT250v cannot be used while charging.
Jabra also provides Bluetooth headsets for most non-Bluetooth phones.
Read the glossary
3
Charge Jabra BT250v
2
Read the glossary at the end of this document to familiarize yourself with important
terms used in this User Manual.
Jabra BT250v uses a rechargeable battery that must be charged fully before you use the
headset for the first time.
Once Jabra BT250v is fully charged, continue with these instructions.
1. Fully insert the headset into the charging cradle.
2. Plug the Jabra BT250v AC adaptor into the headset’s charging cradle.
3. Plug the AC adaptor into the electrical outlet.
4. Charge your headset until the blue light on Jabra BT250v turns off. The unit will be
fully charged in approximately 2 hours.
4
5
1. To turn off the vibrate feature, hold the volume-down button while you turn the
headset on.
“Pair” to your Bluetooth phone
4
2. If you wish to re-activate the vibrate feature, hold the volume-up button while you
turn the headset on.
3
Pairing will create a unique and encrypted wireless link between
two Bluetooth enabled devices such as your Bluetooth phone and Jabra BT250v.
1. Ensure the headset is off (see Turning
BASIC OPERATIONS
headset on/off section).
2. Press and hold until you see a solid
blue light (approximately 8 seconds), then
release* (see Fig. 2).
Turning headset on/off
6
What you do
What you hear
What you see
3. Set your Bluetooth phone to “discover”
the headset by following your phone’s
instruction guide. Typically, the steps
involve going to a “setup”, “connect”, or
“Bluetooth” menu on your phone and
then selecting the option to “discover” a
Bluetooth device.
Turning
headset on
Press and hold for 3 to
5 seconds until you see a
burst of flashes on the blue
indicator light, then release
Ascending
(low-to-high)
tones
The blue indicator
light will flash while
the power is on (see
Status indicators
table below)
Fig. 2
Turning
headset off
Press and hold for 3 to
5 seconds until you see a
burst of flashes on the blue
indicator light, then release
Descending
(high-to-low)
tones
The blue indicator
light will stop
flashing
4. Your phone will find the “Jabra BT250v”
headset and ask if you want to pair with it.
Confirm this by pressing “yes” or “ok”.
Fig. 3
4
5. Enter passkey or PIN = 0000 (4 zeros), then press “yes” or “ok”.
Status indicators
What you see
IMPORTANT: If pairing was successful, the blue indicator light will briefly flash rapidly
before going back to flashing every 3 seconds. If unsuccessful, the light remains solid,
and you’ll need to reattempt pairing (see steps 3–5 above).
What you hear
Status
5
Flashes every
second
Quick series of 2 tones
– low to high pitch (when
active mode starts)
Active Mode
Call in progress
Up to 7 hours of talk-time*
•
* If you have a Bluetooth phone that supports the hands-free Bluetooth profile,
see Enhanced features section for alternative pairing instructions. Phone-
specific pairing instructions can be found online at www.jabra.com/fscs
•
6
Flashes every
3 seconds
Quick series of 2 tones
– high to low pitch (when
standby mode starts)
Standby Mode
Waiting for call
Up to 200 hours of
standby time*
•
•
Turning on/off call alert vibrate
3 flashes every
second
3 beeps every 30 seconds
3 beeps every 5 minutes
Low Battery (in active mode)
5
3 – 5 minutes of talk time left
•
The Jabra 250v has a unique call alert feature that vibrates to inform you that you are
receiving a call. The vibrate function is enabled when you first turn on the Jabra 250v.
If you turn on the headset in the usual way without touching the volume button, the
vibrate function will remain enabled.
3 flashes every
3 seconds
Low Battery (in standby mode)
3 – 5 minutes of talk time left
•
*
Depending on phone type and usage.
6
7
IMPORTANT: Do not hold the button down for more than 3 to 5 seconds when
turning the headset on or else it may go into pairing mode, and the blue indicator light
will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat
process for turning the headset on.
Ending a call
9
Press and release once
OR
End call from phone’s keypad
•
•
Choosing wearing preference
7
Answering a call
10
Jabra BT250v is ready to wear on the right ear. If
you prefer the left, gently rotate the MiniGel 180°.
After you hear the ring tone, press and release once
OR
Answer the call with your phone’s keypad. You may then need to transfer the call to
the headset by pressing and releasing once (depending on your phone)
•
•
For optimal performance, wear Jabra BT250v and
your Bluetooth phone on the same side of your
body. In general, you will get better performance
when there are no obstructions (including parts of
your body) between the headset and the phone.
Call-waiting*
11
(Recommended) Use standard method from your phone’s keypad which typically
involves pressing the “send” button
OR
•
Fig. 4
Press and release once to answer the incoming call and toggle between calls
(some phones do not support this headset feature)
•
Making a call
8
IMPORTANT: Do not hold the button down too long when making, ending, or
answering a call. This should only be a quick tap, so you don’t put the headset into
pairing mode by accident.
If Jabra BT250v is off, turn it on now (see Turning headset on/off section).
Using phone’s keypad
1. Dial number on keypad.
2. Press phone’s “send” key.
*
See Enhanced features section for alternative call-waiting instructions for
phones that support the hands-free profile.
Using voice-activated dialing (after you’ve set up voice tags on your phone)
1. Press and release once. You’ll hear 1 short beep while doing this.
2. You’ll then hear the voice-activation tone; say the name of the person you wish to call.
NOTE: Record voice tag from headset for better reception.
8
9
“Pairing” to a Bluetooth phone with hands-free profile:
TIPS AND SOLUTIONS
1. Ensure headset is off (see Turning
headset on/off section).
Resetting the headset
12
2. Press and hold plus the volume up
button until you see a solid blue light
(approximately 8 seconds), then release
(see Fig. 5).
If the headset is not responding or the blue light will not turn on or off after
pairing, you may need to RESET your headset.
1. Fully insert the headset into the charging cradle.
3. Set your Bluetooth phone to “discover”
the headset by following your phone’s
instruction guide. Typically, the steps
involve going to a “setup”, “connect”, or
“Bluetooth” menu on your phone and
then selecting the option to “discover”
a Bluetooth device*.
2. Plug the Jabra BT250v AC adaptor into the headset’s charging cradle.
3. Plug the AC adaptor into the electrical outlet.
Fig. 5
4. Leave the headset in the charging cradle for about 3 seconds, then remove the
headset (see Fig. 1).
5. Unplug the AC adaptor from the charging cradle.
4. Your phone will find the “Jabra BT250v”
headset and ask if you want to pair with
it. Confirm this by pressing “yes” or “ok”.
Tips for Nokia Bluetooth phones
13
(Such as Nokia 6310 and 8910 series)
5. Enter passkey or PIN = 0000 (4 zeros),
Please ensure that the headset is allowed by the phone to connect without
authorization. To do this, you must adjust your phone’s settings.
Fig. 6
then press “yes” or “ok”.
Set the following menu options:
*
Phone-specific pairing instructions and the most current list of phones with
hands-free profile can be found online at www.jabra.com/fscs
Menu > Bluetooth > View Paired Devices > select your headset, press “Options”
•
> Request conn. authorization? — No
IMPORTANT: If pairing was successful, the blue indicator light will briefly flash rapidly
before going back to flashing every 3 seconds. If unsuccessful, the light remains solid,
and you’ll need to reattempt pairing (see steps 3–5 above).
Enhanced features (for Bluetooth phones with hands-free profiles)
14
Enhanced features are available for phones that support the hands-free Bluetooth
profile such as Nokia 3600, 3650, 6310, 6310i, 8910, 8910i, Sony Ericsson
T610, T616, T618, Siemens S55 and S56. Check your phone’s instruction guide
or contact the phone manufacturer if you are not sure if your phone supports the
hands-free Bluetooth profile.
You can enable these enhanced features by using the following alternative
pairing sequence.
10
11
Once you’re done pairing, the following new headset features will be available:
5. Will my Jabra BT250v interfere with my car’s electronics, radio,
or computer?
Last number redial (when not on a call)
While the headset is on, press and hold until you hear 2 short beeps,
•
Jabra BT250v produces significantly less power than a typical mobile phone. It also
only emits signals that are in compliance with the international Bluetooth standard.
Therefore, you should not expect any interference with standard consumer-grade
electronics equipment.
release immediately
Rejecting an incoming call (when not on a call)
When your phone rings, press and hold until you hear 2 short beeps,
•
6. Can other Bluetooth phone users hear my conversation?
When you pair your headset to your Bluetooth phone, you are creating a private
link between only these two Bluetooth devices. The wireless Bluetooth technology
used in your headset is not easily monitored by third parties because Bluetooth
wireless signals are significantly lower in radio frequency power than those
produced by a typical mobile phone.
release immediately
Call-waiting (swapping between 2 calls)
When your phone notifies you of another incoming call while you’re on a call,
•
press and hold until you hear 2 short beeps, release immediately
Putting a call on hold
While you’re on a call, press and hold until you hear 2 short beeps, release
•
7. What material is the headset made of?
immediately. Repeat to retrieve the call
The MiniGel is made of PVC (polyvinyl chloride), a form of plastic. The headset itself
is primarily made of thermoplastic polyurethane, which is a soft plastic. The face
of the headset, where the buttons are located, is made of polycarbonate, a very
strong, hard plastic. Neither the MiniGel nor the headset contains latex.
Frequently asked questions
15
8. How do I take care of Jabra BT250v?
1. How far away from my phone will my Jabra BT250v work?
To clean the headset, use a clean, soft cloth that is slightly damp
To clean the MiniGel, remove it from the headset by gently lifting and pulling it
off the speaker housing. Then, wash it in warm, soapy water
•
The operating range is typically up to 33 feet (10 metres).
•
2. Will Jabra BT250v work with my cordless phone at home?
Jabra BT250v is not designed for use with cordless phones.
3. Will Jabra BT250v work with laptops, PCs, and PDAs?
Need more help?
16
Jabra BT250v will work with devices that are compliant with Bluetooth version 1.1
or higher specifications and support the headset and/or hands-free profile(s).
4. Will anything cause interference with my conversation when I’m using my
Jabra BT250v?
2. E-mail and telephone support: See back inside cover for customer service support
telephone numbers and e-mail.
Appliances such as cordless phones and wireless networking equipment may
cause interference with your conversation, usually adding a crackling noise. To
reduce any interference, keep the headset away from other devices that use or
produce radio waves.
Storage of headset
17
1. Always store the Jabra BT250v with power off and safely protected.
2. Avoid storage at high temperatures (above 60°C / 134°F) – such as in a hot vehicle
or in direct sunlight. (Storage at high temperatures can degrade performance and
reduce battery life).
3. Do not expose the headset or any of its supplied parts to rain or other liquids.
12
13
Certification and safety approvals
Warranty and parts replacement
19
18
Jabra (GN Netcom) warrants this product against all defects in material and
workmanship for a period of two years from the date of original purchase. The
conditions of this warranty and our responsibilities under this warranty are as follows:
This product is CE marked according to the provisions of the R & TTE Directive
(99/5/EC).
Hereby, GN Netcom, declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The warranty is limited to the original purchaser
•
•
A copy of your receipt or other proof of purchase is required. Without proof of
purchase, your warranty is defined as beginning on the date of manufacture as
labelled on the product
Please note that this product uses radio frequency bands not harmonised within
EU. Within the EU this product is intended to be used in Austria, Belgium,
Denmark, Finland, France, Germany, Greece, Ireland. Italy, Luxembourg, The
Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in
Iceland, Norway and Switzerland.
The warranty is void if the serial number, date code label or product label is
removed, or if the product has been subject to physical abuse, improper installation,
modification, or repair by unauthorized third parties
•
The responsibility of Jabra (GN Netcom) products shall be limited to the repair or
replacement of the product at its sole discretion
Users are not permitted to make changes or modify the device in any way.
Changes or modifications not expressly approved by Jabra (GN Netcom) will void
the user’s authority to operate the equipment.
•
Any implied warranty on Jabra (GN Netcom) products is limited to two years from the
date of purchase on all parts, including any cords and connectors
•
Bluetooth
Specifically exempt from any warranty are limited-life consumable components
subject to normal wear and tear, such as microphone windscreens, ear cushions,
decorative finishes, batteries, and other accessories
•
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by GN Netcom is under license. Other trademarks and trade
names are those of their respective owners.
Jabra (GN Netcom) is not liable for any incidental or consequential damages arising
from the use or misuse of any Jabra (GN Netcom) product
•
This warranty gives you specific rights and you may have other rights which vary
from area to area
•
Unless otherwise instructed in the User Manual, the user may not, under any
•
circumstances, attempt to perform service, adjustments or repairs on this unit,
whether in or out of warranty. It must be returned to the purchase point, factory or
authorized service agency for all such work
Jabra (GN Netcom) will not assume any responsibility for any loss or damage incurred
in shipping. Any repair work on Jabra (GN Netcom) products by unauthorized third
parties voids any warranty
•
14
15
|