Notes
• The indicator sections of
WARNING
roughly shows the
remaining battery power. One section does not always
indicate one-fourth of the battery power.
3-252-374-21 (1)
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
• Depending on operating conditions, the indicator
sections of
may increase or decrease.
Do not install the appliance in a confined space, such as
a bookcase or built-in cabinet.
Notes on using the dry batteries
• Be sure to remove the AC power adaptor.
• When the batteries are depleted, replace both batteries
with new ones.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, tablecloths, curtains, etc. And
don’t place lighted candles on the apparatus.
Portable CD Player
To use the AC power adaptor (C)
To prevent fire or shock hazard, do not place objects filled
with liquids, such as vases, on the apparatus.
Operating Instructions
1
Connect the AC power adaptor (not supplied) to an
AC outlet.
CAUTION
The use of optical instruments with this product will
increase eye hazard.
Playing a CD
Certain countries may regulate disposal of the battery used
to power this product. Please consult with your local
authority.
To insert a CD
1
Slide OPEN to open the lid (A).
2
Fit the CD to the pivot, then close the lid (D).
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN
• DO NOT STARE INTO BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENT
Notes
XP-EV501R/EV501C
• This CD player can play discs recorded in the Compact
Disc Digital Audio (Audio CD) format.
Sony Corporation ©2003 Printed in China
•
This CD player can play CD-Rs/CD-RWs recorded in the
Compact Disc Digital Audio (Audio CD) format, but
playback capability may vary depending on the quality of
the disc and the condition of the recording device.
The validity of the CE marking is restricted to only those
countries where it is legally enforced, mainly in the
countries EEA (European Economic Area).
Owner’s Record
• This product is designed to play back discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
The illustrations below show the model XP-EV501R.
CD player (front)
The model number and the serial number are located at the
rear of the CD player. Record these numbers in the spaces
provided below. Refer to them whenever you call upon
your Aiwa dealer regarding this product.
Strap holes
Display
1P-MODE/
Model No. _____________________________________
Serial No. ______________________________________
3r/t
(skip/search)
2SOUND
For the customers in the USA
4ca* (play/
pause)/ENTER
To operate the CD player
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Button/Switch
Function/Operation
1 P-MODE/
(play mode/repeat)
Press repeatedly until the play
mode you want appears in the
display.
A
5s(stop)/OFF/
CHARGE
OPEN
No indication: Normal play
“1”: Single play
“SHUF”: Shuffle play
“PGM”: PGM (program) play
To repeat the play mode you
selected, press and hold until
DC IN 4.5 V
(external power
input) jack
“
” appears. To cancel it, press
\ (headphones)
jack
and hold again until “
disappears.
”
7VOL +*/–
6HOLD
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
– Consult the dealer or an experienced radio/TV
technician for help.
2 SOUND
Use to emphasize the bass-boosted
sound. Press repeatedly to select
*The button has a tactile dot.
or
enhances more than
.*1
.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
CD player (rear/inside)
3 r/t
(B SKIP/F SKIP)
(skip/search)
Press r or t once to find
the beginning of the current/next
track. Press r or t
repeatedly to find the beginning of
the previous/succeeding tracks.
Press and hold r or t to go
backward/forward quickly.
B
Power Sources
To use the batteries (B)
Use only the following batteries for your CD player:
4 ca(play/pause)/ Press to start playing. Press again
ENTER
to pause playing.
To play from the first track, press
for 2 seconds or more while the
CD player is stopped.
Press to enter the selected track
for the PGM play.
Dry batteries
• LR6 (size AA) alkaline batteries (not supplied)
Open the battery
compartment lid.
Insert the ( end first (for both
batteries).
Rechargeable batteries
Charge the rechargeable batteries before using them for
the first time.
• Commercially-available size AA Ni-MH rechargeable
batteries of 1.2 V DC, 700 mAh
5 s(stop)/OFF/
CHARGE(s)
Press to stop playing. Press also to
start charging.
8E•A•S•S
6 HOLD
Use to lock the controls on your
CD player or remote control to
prevent accidental button presses.
HOLD on the CD player works
only for the player, while HOLD
on the remote control works only
for the remote control.
Remote control (XP-EV501R only)
Display
To insert the batteries
1
Open the battery compartment lid on the rear of your CD
player.
3tF SKIP
4ca
Sound mode
Play mode
2
Insert two batteries by matching the ) to the diagram
in the battery compartment and close the lid until it
clicks into place.
7VOL
2SOUND
7 VOL+/–
Press (slide for the remote control)
to adjust the volume.
3
When using the rechargeable batteries, connect AC
power adaptor (not supplied) to the DC IN 4.5V jack
of your CD player and an AC outlet, then press s/
OFF/CHARGE to start charging.
The CD player charges the batteries. The “CHG”
indicator turns on in the display and the indicator
8 E•A•S•S*2
Set to ON to protect against sound
skipping.*3
CHG
Track number
Playing time
*1 If the sound is distorted when using the SOUND function,
turn down the volume.
6HOLD
Headphones
jack
*2 E•A•S•S = Electronic Anti-Shock System
*3 Sound may skip:
5s
Remaining battery power
sections of
light up in succession. When the
– if the CD player receives stronger continuous shock than
expected,
– if a dirty or scratched CD is played or
– when using poor-quality CD-Rs/CD-RWs or if there is a
problem with the recording device or application software.
batteries are completely charged, the “CHG” and
indicators get turned off.
If you press s/OFF/CHARGE after the charge has
3rB SKIP
Note
already been completed, the
indicator flashes
and “Full” appears in the display.
Use only the supplied remote control. You cannot operate this
CD player with the remote control supplied with other CD
players.
To remove the CD
4
Disconnect the AC power adaptor.
Remove the CD while pressing the pivot (E).
Battery life* (approx. hours)
(When the CD player is used on a flat and stable place.)
Playing time varies depending on how the CD player is used.
(Continue to the reverse side)
C
D
Label side up
E•A•S•S
ON
to an AC outlet
OFF
Two Sony alkaline
batteries LR6 (SG)
(produced in Japan)
50
40
DC IN
4.5 V
AC power
adaptor (not
supplied)
*
Measured value by the standard of JEITA (Japan
Electronics and Information Technology Industries
Association).
E
To check the remaining power of the
batteries
You can check it in the display.
\
Replace the batteries when “
” flashes.
Lo batt*
* Beep sounds only when the CD player is set to sounds beep.
See “To turn off the operation beep sound” on the reverse
side.
Headphones
|