Model
INSTRUCTION MANUAL
Contents
Warnings and Precautions ............................................................................... 2
Important Safety Instructions............................................................................ 3
In the Box ......................................................................................................... 4
Features ........................................................................................................... 4
Powering the Unit............................................................................................. 5
Playing a CD..................................................................................................... 5
Programming a CD........................................................................................... 5
Location of Controls.......................................................................................... 6
Control Definitions............................................................................................ 7
Service Information........................................................................................... 8
Important Safety Instructions
1. Read Instructions - All the safety and
operating instruction should be read before the
product is operated.
feature. If you are unable to insert the plug
receptacles as this can result in a risk of fire or
electric shock.
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarizes
plug.
19. Object and Liquid Entry - Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
ꢀ. Retain Instructions - The safety and
operating instruction should be retained for
future reference.
Alternate Warnings - This product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
3. Heed Warnings - All warning on the product
and in the operating instructions should be
adhered to.
ꢀ0. Servicing - Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel.
4. Follow instructions - All operating and use
instructions should be followed.
5. Cleaning - Unplug this product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Clean only with a
dry cloth.
ꢀ1. Damage Requiring Service - Unplug
this product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
13. Power-Cord Protection - Power supply cords
should be routed so that they are not likely to
be walked on or pinched by items placed upon
or against them, paying particular attention to
cords at plugs, convenience receptacles, and
point where they exit from the product.
6. Attachments - Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
a) When the power-supply cord or plug is
damaged,
7. Water and Moisture - Do not use this product
near water - for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet
basement, or near a swimming pool, and the
like. The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
apparatus.
b) If liquid has been spilled, or objects have
fallen into the product,
14. Protective Attachment Plug - The product
is equipped with an attachment plug having
overload protection. This is a safety feature.
See Instruction Manual for replacement or
resetting of protective device. If replacement
of the plug is required, be sure the service
technician has used a replacement plug
c) If the product has been exposed to rain or
water,
d) If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
8. Accessories - Do not place this product on
an unstable cart, stand tripod, bracket, or
table. The product may fall, causing serious
injury to a child or adult, and serious damage
to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use
a mounting accessory recommended by the
manufacturer.
specified by the manufacturer that has the
same overload protection as the original plug.
15. Outdoor Antenna Grounding - If an
outside antenna is connected to the receiver,
be sure the antenna system is grounded
so as to provide some protection against
voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and
supporting structure, grounding of the mast
and supporting structure, grounding of the
lead-in wire to an antenna-discharge unit, size
of grounding conductors, location of antenna-
discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
e) If the product has been dropped or
damaged in any way, and
f) When the product exhibits a distinct change
in performance - this indicates a need for
service.
ꢀꢀ. Replacement Parts - When replacement parts
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
9. A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
See figure:
See figure:
ꢀ3. Safety Check - Upon completion of any
service or repairs to this product, ask the
service technician to perform safety checks
to determine that the product is in proper
operating condition.
ꢀ4. Wall or Ceiling Mounting - The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
10. Ventilation - Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the product and to protect
it from overheating, and these openings must
not be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instruction have been adhered
to.
ꢀ5. Heat - The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat. Battery shall not
be exposed to excessive heat such as sunshine,
fire, or the like.
16. Lightning - For added protection for this
product during a lightning storm, or when it
is left unattended and unused for long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
ꢀ6. Main plug is used as disconnect device and
it should remain readily operable during
intended use. In order to disconnect the
apparatus from the mains completely, the
mains plug should be disconnected from the
mains socket outlet completely.
11. Power Sources - This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company. For products intended to operate
from battery power, or other sources, refer to
the operating instruction.
17. Power Lines - An outside antenna system
should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might be
fatal.
ꢀ7. Excessive sound pressure from earphones and
headphones can cause hearing loss.
1ꢀ. Grounding or Polarization - This product
may be equipped with a polarized alternating-
current line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a safety
18. Overloading - Do not overload wall outlets,
extension cords, or integral convenience
3
In the Box
• PC108B
• Earbuds (One Set)
• Documentation
Features
• CD / CD-R/RW Compact Disc Player
• LCD Display
- Low Battery Indicator
• Playback Features
- Repeat Play
- Programmable Tracks
- Song Skip/Search
- Digital Volume Control
- Automatic Bass Boost System
• Power
- Uses ꢀ x “AA” Batteries, (not included)
• Includes
- Stereo Earbuds
4
Powering the Unit
The unit requires ꢀ AA batteries, not included, or an AC adapter (1ꢀ0V / 60Hz), not
included, to power on.
Playing a CD
1. Slide the Open Switch over to open the CD door.
ꢀ. Load a CD into the unit.
3. After the CD door is closed, the CD should begin playing immediately. If the CD
does not begin playing, press the Play/Pause Button to begin playing a loaded
CD.
Programming a CD
1. Slide the Open Switch over to open the CD door.
ꢀ. Load a CD into the unit.
3. After the CD is loaded, press the Program Button.
4. Press the Skip/Search Buttons to adjust the track number.
5. Press the Program Button to set the selected track number as the first
programmed track. Repeat steps 4 and 5 for all subsequent CD tracks.
Up to 20 tracks can be programmed at one time.
6. Press the Play/Pause Button to begin playing the programmed CD tracks.
5
Location of Controls
4
N
OW
D
P
I
K
S
5
6
ONE
VOL PR OG.
AL
L
R AND. INTR O B B S
1
0249
7
8
ꢀ
3
9
10
PHONES
VOLUME
OPEN
DC IN 4.5V
11
6
Control Definitions
1
2
3
4
LCD Display
Use the LCD Display to view CD information and battery life.
Volume Buttons
Press the Volume Buttons to adjust the volume of audio output from the unit.
Headphone Jack
Use the Headphone Jack to connect a set of earbuds or headphones to the unit.
Skip/Search Buttons
Press the Skip/Search Buttons to skip from one track to the next or previous track.
Press and hold the Skip/Search Buttons to search through an individual track on a
loaded CD.
5
6
7
Play/Pause Button
Press the Play/Pause Button to play or pause a loaded CD.
Stop Button
Press the Stop Button to stop a loaded CD during play.
Program Button
Press the Program Button to program a loaded CD to play specified tracks in a
specific order.
8
9
Mode Button
Press the Mode Button to switch the unit’s play mode from Random, Repeat, Re-
peat All, and Intro modes.
Open Switch
Use the open switch to open the unit when loading or unloading a CD.
10 DC Power Input 4.5V (Requires an AC adapter, not included)
Use the DC Power Input to connect the unit to a standard AC outlet for power.
11 Battery Compartment (Requires 2 AA batteries, not included)
7
Service Information
Address ꢀ116 Carr Street, St. Louis MO, 63106
Phone
Fax
Email
1-314-6ꢀ1-ꢀ881
1-314-588-1805
Website www.gpx.com
To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel
ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol,
visit the Support section at
francés visite la sección de la ayu- ou le Français visitez la section de
©
ꢀ007 Digital Product International (DPI, Inc.) All trademarks appearing herein are the property of their respective owners. All products
subject to change without notice.
|