BEFOREYOU BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H375 Headset.
Earhook
motorola
H375
Speaker
Power Button
Microphone
Volume
Button
Call Button
s
Indicator
Light
Quick Start Guide
START BLUETOOTH
FEATURE
CHARGE
1
2
Your Headset's Battery
Your Phone
Charging
®
Port
Your phone's Bluetooth feature is off by
default.To use your headset, you must turn on
the Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
Plug the Motorola charger into the end of
the headset.
1
M
Press
(Menu) > Settings > Connection >
1
Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
The indicator light turns on when the
battery is charging. It may take up to 30
seconds for the light to turn on. When the
headset's battery is fully charged (about 3
hours), the indicator light is steadily lit in
blue.
2
3
4
5
Unplug the charger from the headset.
2
Press Select to turn on the Bluetooth
feature.The Bluetooth feature remains on
until you turn the feature off.
Note: Headset is not functional while charging.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
TROUBLESHOOTING
USING YOUR H375
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, first turn off the
other device, then turn your headset off and on.
The indicator light becomes steadily lit in blue
indicating the headset is now in pairing mode.
See
Features and
Functions Guide
on the reverse side
for information on
using your H375
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
TURNING HEADSET
ON AND OFF
Features and
Functions Guide
To turn your headset on, press and hold
the Power button until the indicator light
flashes.
To turn your headset off, press and hold
the Power button until the indicator light
flashes rapidly and then turns off.
Power Button
Indicator
Light
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H375.
WEARINGTHE HEADSET
CHANGING FOR USE
ON OTHER EAR
You can wear your H375 headset on your left or
right ear.The headset comes ready for the right
ear.To change the headset for the left ear:
Your H375 headset is supplied with both round-
and oval-shaped earbuds to provide personal
choice for maximum comfort.The earbud is fitted
onto the end of your headset’s earpiece speaker,
and placed onto your ear when using your
headset as shown.
Firmly lift and pull the
top of the earhook up
and off speaker stem
as shown.
1
Flip the headset over.
2
3
To wear your headset, flex the earhook and
loop it over your ear as shown.
Firmly attach the
earhook to the speaker
stem as shown.
CHANGINGVOLUME
European Union Directives Conformance
Statement
BUTTON ORIENTATION
Hereby, Motorola declares that
this product is in compliance with:
You can also change the orientation of the
volume buttons on your headset.
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
Turn the headset power off.
1
2
• All other relevant EU Directives.
Press and hold the Volume button you
want to assign as the "volume up" button
and the Power button to power on the
headset. The indicator light flashes three
times in blue.
Product
Approval
Number
Power Button
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
product Approval Number from your product’s label in
the “Search” bar on the web site.
Volume Buttons
MAKING CALLS
CHECKING BATTERY LEVEL
To check battery level while headset is powered on,
press and hold both volume buttons for 5 seconds
until you hear a beep.The indicator light displays the
following charge status for a few seconds.
Function
Action
Make a voice dial call
Tap the Call button
and speak the
name after the tone
Indicator Light
Charge Level
End a call
Tap the Call button
Tap the Call button
Red
Battery at less than
10% charge
Answer a call
Ignore a call
Purple
Blue
Battery at between
Press and hold either
Volume button until
incoming call stops
ringing
10% and 80% charge
Battery at more than
80% charge
Redial last call
Press and hold the
Call button for at least
2 seconds until you
hear a beep
CHARGING STATUS
With the Charger Plugged In
Indicator Light
Charge Status
Mute or unmute a call
Tap both Volume
buttons
Red
Charging (battery
level less than 10%
charge)
Note: Some features are phone/network dependent.
Purple
Blue
Charging (battery
level more than 10%
charge)
Note:Your H375 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which profile
your phone supports. See your phone's user's guide for more
information.
Charging complete
OPERATING STATUS
AUDIOTONES
With No Charger Plugged In
AudioTone
Headset Status
Powering on
Indicator Light
Off
Headset Status
Power off
Ascending tone
Descending tone
Powering off
Three blue flashes
Steady blue
Powering on/off
Pairing mode
Two ascending
tones
Pairing successful
Ring tone
Incoming call
Rapid blue/purple flashes Pairing/connect
successful
Two short tones when
pressing Volume button
Volume at minimum
or maximum
Quick blue flash
Slow blue flash
Incoming/outgoing call
High/low tones
repeated every 60 sec.
Low battery
Out of range
Connected call
Connected (on a call)/
Standby (not on a call)
No audio indications;
deteriorating quality
Slow red flash
Idle (not connected
to phone)
Three ascending tones
Slow purple flash
Quick red flash
Connected call muted
Low battery
Three descending tones Ended call
Two rapid ascending
tones
Mute enabled
Note: After 30 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
Two rapid descending
tones
Mute disabled
|