ADDONICS TECHNOLOGIES
Model: AEMK35CB
Installation Guide
4. Mount the Desktop Card Drive reader on a 3.5”
Dual connector IDE
ribbon cable
Drive activity LED
drive bay. Using the screws provided, secure the
reader to the drive bay.
Types of Bus Slots
PCI
Eject Button
Desktop Card Drive reader
Cardbus and PCMCIA
devices slot
PCI Controller
PCI
1. Connect the other end of the dual connector IDE
ribbon cable to the IDE connector on the Desktop
Card Drive reader.
Note:
The AEMK35CB PCI controller connects to a PCI
bus slot.
Product Features
•
Kit includes Card Drive, PCI controller and
connecting cables
•
Card Drive Installs into standard 3.5" drive bay to
be accessible from the front of the computer, just
like a floppy drive!
•
•
Supports both 32-bit Cardbus and 16-bit PCMCIA
devices
Compatible with any CardBus/ PCMCIA device
such as Wireless Broadband cards, Wireless
modem, Panasonic P2 card, ATA Flash, sound
card, video capture card, Addonics family of
CardBus adapters
2. Connect one end of the dual connector IDE ribbon
cable to the IDE connector on the PCI controller.
•
•
•
•
Drive activity LED on Card drive
Simple plug and play, no drivers required
Compatible with Windows XP
RoHS Compliant
TECHNICAL SUPPORT
Email:
Internet:
Technical Support (8:30 am to 6:00 pm PST)
Phone:
Email:
408 433-3855
3. Plug-in the PCI controller on a PCI bus slot.
|