Feb 2011
VE258H/VE258Q Series
LED Monitor
User Guide
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extention cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
•
•
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
•
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
iv
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the LED. Never spray cleaner directly on the screen, as it may drip
inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the fluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when
trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1.
2.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
vi
1.1
Welcome!
Thank you for purchasing the ASUS® VE258H/VE258Q Series LED monitor!
The latest widescreen LED monitor from ASUS provides a crisper, broader, and
brighter display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the VE258H/VE258Q Series brings you!
1.2
Package contents
Check your VE258H/VE258Q Series LED monitor package for the following items:
LED monitor
Monitor base
Quick start guide
Warranty card
1 x Power cord
1 x VGA cable
1 x DVI cable
1 x Audio cable
1 x DisplayPort cable (optional for VE258Q)
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LED Monitor VE258H/VE258Q Series
1-1
1.3
Assembling the monitor base
To assemble the monitor base:
1.
2.
Attach the base to the arm and fix with the screw to join them tightly. You can
easily tighten the screw by fingers.
Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2
1
Make sure to screw the base to the arm tightly.
1.4
Connect cables
To connect cables:
Connect the cables you need based on chapter 1.5.2, page1-5.
1-2
Chapter 1: Product Introduction
1.5
Monitor introduction
1.5.1
Front of the LED monitor
1
2
3
4
5
6
1.
Button:
•
Automatically adjust the image to its optimized position, clock, and
phase by long pressing this button for 2-4 seconds (for VGA mode only).
•
•
Use this hot key to switch from six video preset modes (Scenery Mode,
Standard Mode, Theater Mode, Game Mode, Night View Mode, and
sRGB Mode) with SPLENDID™ Video Intelligence Technology.
Exit the OSD menu or go back to the previous menu as the OSD menu
is active.
2.
Button:
•
Press this button to decrease the value of the function selected or move
to the next function.
•
This is also a hot key for Volume adjustment.
3.
MENU Button:
•
•
Press this button to enter the OSD menu.
Press this button to enter/select the icon (function) highlighted while the
OSD is activated.
4.
Button:
•
•
Press this button to increase the value of the function selected or move
right/up to the next function.
This is also a hot key for Brightness adjustment.
ASUS LED Monitor VE258H/VE258Q Series
1-3
5.
6.
Input Select Button:
•
Use this hot key to switch from VGA, DVI, HDMI and DisplayPort input
signal (only available for model VE258Q).
Press
(Input Select button) to display HDMI signals after you
connect HDMI cable with the monitor.
Power Button/Power Indicator:
•
•
Press this button to turn the monitor on/off.
The color definition of the power indicator is as the below table.
Status
Blue
Description
ON
Amber
OFF
Standby mode
OFF
1-4
Chapter 1: Product Introduction
1.5.2
Rear of the LED monitor
Screw Holes
for VESA
Wall Mount
7
1
2
3
4
5
6
1
2
3
4
5
6
7
AC-IN port
DisplayPort (only available for model VE258Q)
HDMI-IN port
DVI port
VGA port
Audio Line-in port
Earphone-out port
ASUS LED Monitor VE258H/VE258Q Series
1-5
2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VE258H/VE258Q Series LED monitor is specially
designed for VESA wall mount.
To detach the arm/stand:
1.
2.
3.
Disconnect power and signal cables. Carefully put the front of the monitor
face down on a clean table.
Use a screwdriver to remove the two screws that secure the stand to the
monitor.
Detach the stand from the monitor.
•
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the stand of the monitor while removing the screws.
•
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load 16.4
kg (Screw size: 4 x 12 mm).
2-1
Chapter 2: Setup
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
•
•
Hold the stand to prevent the monitor from falling while changing its angle.
You can adjust the monitor’s angle from -5˚ to 20˚.
-5 ~ 20
ASUS LED Monitor VE258H/VE258Q Series
2-2
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
VE258
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Sound
Input Select
System Setup
Night View Mode
sRGB
Move
Menu
Exit
1.
2.
Press the MENU button to activate the OSD menu.
Press and to navigate through the functions. Highlight and activate
the desired function by pressing the MENU button. If the function selected
has a sub-menu, press and again to navigate through the sub-menu
functions. Highlight and activate the desired sub-menu function by pressing
the MENU button.
3.
4.
Press and to change the settings of the selected function.
To exit the OSD menu, press the
adjust any other function.
button. Repeat step 2 and step 3 to
3-1
Chapter 3: General Instruction
3.1.2
OSD Function Introduction
1.
Splendid
This function contains six sub-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to maintain
your setting or return to the preset mode.
VE258
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Sound
Input Select
System Setup
Night View Mode
sRGB
Move
Menu
Exit
•
•
•
•
•
•
Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™ Video Intelligence.
Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence.
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence.
Game Mode: This is the best choice for game playing with SPLENDID™
Video Intelligence.
Night View Mode: This is the best choice for playing dark-scene game or
watching movie with SPLENDID™ Video Intelligence.
sRGB: This is the best choice for viewing photos and graphics from PCs.
•
•
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and
ASCR functions are not user-configurable.
In the sRGB, the Saturation, Color Temp., Skin Tone, Sharpness, and
ASCR functions are not user-configurable.
ASUS LED Monitor VE258H/VE258Q Series
3-2
2.
Color
Select the image color you like from this function.
VE258
Splendid
Color
Brightness
Contrast
100
80
90
Image
Saturation
Color Temp.
Sound
User Mode
Natural
Input Select
System Setup
Skin Tone
Move
Menu
Exit
•
Brightness: The adjusting range is from 0 to 100. The
button is also a
hot key to activate this function.
•
•
•
Contrast: The adjusting range is from 0 to 100.
Saturation: The adjusting range is from 0 to 100.
Color Temp.: Contain three preset color modes (Cool, Normal, Warm)
and one User Mode.
•
Skin Tone: Contain three color modes including Reddish, Natural, and
Yellowish.
In the User Mode, colors of R (Red), G (Green), and B (Blue) are
userconfigurable; the adjusting range is from 0 ~ 100.
3-3
Chapter 3: General Instruction
3.
Image
You can adjust the image Sharpness, Trace Free, Aspect Control, Position
(VGA only), and Focus (VGA only) from this main function.
VE258
Splendid
Color
Sharpness
Trace Free
Aspect Control
ASCR
60
60
Image
Sound
Full
OFF
Position
Focus
Input Select
System Setup
Move
Menu
Exit
•
•
•
•
•
Sharpness: Adjust the picture sharpness. The adjusting range is from 0
to 100.
Trace Free: Speed up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or “Over Scan”
(only available for HDMI input).
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
Position: Adjust the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(only available for VGA input).
•
Focus: Reduce Horizontal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (only available for VGA input).
ASUS LED Monitor VE258H/VE258Q Series
3-4
4.
Sound(only available for model VE258Q)
Adjust the sound settings to your preference.
VE258
Splendid
Color
Volume
Mute
50
OFF
Image
Source
Line In
Sound
Input Select
System Setup
Move
Menu
Exit
•
Volume: Adjust the output volume level. The
button is also a hot key
to activate this function.
•
•
Mute: Mute the output volume.
Source: Adjust audio source to “Line In” or “HDMI” (only available for
HDMI input);
Adjust audio source to “Line In” or “DisplayPort” (only available for
DisplayPort input).
5.
Input Select
Select the input source from VGA, DVI, HDMI, or DisplayPort(only available
for model VE258Q).
VE258
Splendid
Color
VGA
DVI
Image
HDMI
Sound
DisplayPort
Input Select
System Setup
Move
Menu
Exit
3-5
Chapter 3: General Instruction
6.
System Setup
Adjusts the system configuration.
VE258
Splendid
Color
Splendid Demo Mode
Volume
OFF
50
Image
OSD Setup
Sound
Language
Information
All Reset
English
Input Select
System Setup
Move
Menu
Exit
•
•
Splendid Demo Mode: Activate the demo mode for the Splendid
function.
Volume: Adjust the Volume level of speakers (only available for model
VE258H).
•
•
OSD Setup: Adjust the horizontal position (H-Position), vertical position
(V-Position), OSD Timeout, DDD/CI, and Transparency of the OSD
screen.
Language: Select OSD language. The selections are English, French,
German, Spanish, Italian, Dutch, Russian, Traditional Chinese, Simplified
Chinese, and Japanese.
•
•
Information: Display the monitor information.
All Reset: Set to “Yes” to revert all settings to the factory default mode.
ASUS LED Monitor VE258H/VE258Q Series
3-6
3.2
Specifications
Model
VE258H
VE258Q
25.0”W (63.44cm)
1920x1080
250cd/m2
Panel Size
25.0”W (63.44m)
1920x1080
250cd/m2
Max. Resolution
Brightness (Typ.)
Intrinsic Contrast Ratio (Typ.)
Viewing Angle (CR=10)
Display Colors
1000:1
1000:1
160°(V) /170°(H)
16.7 M(6bit Hi FRC)
2ms (Gray to Gray)
2W x 2 stereo
Yes
160°(V) /170°(H)
16.7 M(6bit Hi FRC)
2ms (Gray to Gray)
2W x 2 stereo
Yes
Response Time
Satellite Speaker
Earphone Output
Sound from HDMI
HDMI input
Yes
Yes
Yes
Yes
DVI input
DVI with HDCP
Yes
DVI with HDCP
Yes
D-Sub input
DisplayPort input
Audio Line-in
-
Yes
Yes
Yes
Power ON Consumption
Tilt
55W
55W
-5° ~ +20°
-5° ~ +20°
VESA Wall Mounting
Phys. Dimension (WxHxD)
Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
Yes (100mm x 100mm)
595x423x219mm
667x527x142mm
5.0 kg
Yes (100mm x 100mm)
595x423x219mm
667x527x142mm
5.0 kg
7.5 kg
7.5 kg
AC 100~240V(Built-in)
AC 100~240V(Built-in)
*Specifications are subject to change without notice.
3-7
Chapter 3: General Instruction
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
Press the
ON mode.
Check if the power cord is properly connected to the
monitor and the power outlet.
The power LED lights amber and
there is no screen image
•
•
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly
•
•
Press the
button for two seconds to
automatically adjust the image.
Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
•
Perform Reset via OSD.
Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
No sound or sound is low
•
Press the
button for two seconds to
automatically adjust the image (for VGA mode only).
Adjust the Phase and Clock settings via OSD.
•
•
Ensure that the audio cable is properly connected to
the monitor and the computer.
•
•
Adjust the volume settings of both your monitor and
computer.
Ensure that the computer sound card driver is
properly installed and activated.
ASUS LED Monitor VE258H/VE258Q Series
3-8
3.4
Supported Timing List
PC Supported Primary Timing
Resolution
640x480
640x480
640x480
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1152x864
1280x960
Refresh Rate
60Hz
Horizontal Frequency
31.469kHz
37.861kHz
37.5kHz
72Hz
75Hz
56Hz
35.156kHz
37.879kHz
48.077kHz
46.875kHz
48.363kHz
56.476kHz
60.023kHz
67.5kHz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60kHz
1280x1024
1280x1024
1440x900
1440x900
1680x1050
1920x1080
60Hz
75Hz
60Hz
75Hz
60Hz
60Hz
63.981kHz
79.976kHz
55.935kHz
70.635kHz
65.29kHz
67.5kHz
IBM Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
Resolution
640x350
Refresh Rate
70Hz
Horizontal Frequency
31.469kHz
720x400
70Hz
31.469kHz
MAC Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
Resolution
640x480
Refresh Rate
67Hz
Horizontal Frequency
35kHz
832x624
75Hz
49.725kHz
VESA Modes, User Available Timing
Resolution
1280x720(RB)
1280x720
Refresh Rate
Horizontal Frequency
44.444kHz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
75Hz
60Hz
75Hz
60Hz
60Hz
44.772kHz
56.456kHz
47.396kHz
49.306kHz
49.702kHz
1280x720
1280x768(RB)
1280x800(RB)
1280x800
1280x800
1440x900(RB)
1440x900
62.795kHz
55.469kHz
70.635kHz
64.674kHz
66.587kHz
1680x1050(RB)
1920x1080
ASUS LED Monitor VE258H/VE258Q Series
3-9
HDMI Supported Primary Timing
VESA Modes, Factory Preset Timing
Resolution
720(1440)x480i
720(1440)x480i
640x480P
720x480P
720x480P
Refresh Rate
59.94 / 60Hz
59.94 / 60Hz
59.94 / 60Hz
59.94 / 60Hz
59.94 / 60Hz
50Hz
Horizontal Frequency
15.734 / 15.75kHz
15.734 / 15.75kHz
31.469 / 31.5kHz
31.469 / 31.5kHz
31.469 / 31.5kHz
15.625kHz
1440x576i
1440x576i, 50Hz
720x576P, 50Hz
720x576P, 50Hz
1280x720P, 50Hz
1280x720P
50Hz
50Hz
50Hz
50Hz
15.625kHz
31.25kHz
31.25kHz
37.5kHz
44.955 /45kHz
28.125kHz
59.94 / 60Hz
50Hz
1920x1080i
1920x1080i
59.94 / 60Hz
33.716 / 33.75kHz
HDMI Supported Optional Timing
Resolution
1440x480P
1440x480P
1440x576P
1440x576P
1920x1080P
1920x1080P
Refresh Rate
Horizontal Frequency
31.469 / 31.5kHz
31.469 / 31.5kHz
31.25kHz
59.94 / 60Hz
59.94 / 60Hz
50Hz
50Hz
50Hz
59.94 /60Hz
31.25kHz
56.25kHz
67.433 / 67.5kHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
3-10
Chapter 3: General Instruction
|