USER’S GUIDE
COLOR MONITOR
Model No : 910TF
C T L
S/N : 9978626520
CONTENTS
INTRODUCTION
This manual explains how to correctly install, operate and get the
Introduction ............................................................................. 1
best performance from your monitor. Please read this user’s
guide carefully before installing your monitor, then keep it near
your monitor for quick reference.
Product Features ................................................................. 2
Setup ......................................................................................... 3
Connecting the Signal Cable and Power Cord..................... 3
Operation & Adjustment ...................................................... 4
Specifications ........................................................................... 9
Factory Preset Timings ........................................................... 9
Troubleshooting ..................................................................... 10
Description for D-sub Connector ......................................... 11
First, please check that the contents of the box corresponds with
the following checklist :
• Color monitor
• Power cord
• User’s Guide
• Warranty Handbook
• Registration Card
If any item is missing or damaged, please contact your dealer.
Please keep the box and packing materials so that you may
properly store or transport your monitor.
English - 1
SETUP
PRODUCT FEATURES
CONNECTING THE SIGNAL CABLE AND POWER
• The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of horizontal and vertical
screen size and position, geometry and screen color.
CORD
1. Turn off the computer and monitor.
• The monitor supports a safe working environment in strict
compliance with the MPR II standard for low emissions.
2. Connect the 15 pin D-sub connector to the output port of the
video card in your computer.
• The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitry makes setup and configuration fast
and effortless.
3. Tighten the screws of the connector.
4. Plug the power cord into the AC receptacle located on the back
of the monitor.
• The monitor features Advanced Color Controls for fine-
tuning to meet your own personal tastes or application
requirements. Use the on-screen controls to adjust the color
temperature, RGB gain value for the best possible screen
color and intensity.
5. Plug the other end of the power cord into the AC outlet.
• Press the menu button and activate the Self-Diagnosis menu
to determine whether your monitor is functioning normally,
not receiving a signal or is receiving a signal that is out of
scanning range.
• Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
• The “borderless” full-screen display capability works under
all graphic modes and provides a larger viewing area than
conventional monitors, giving you a better picture with more
workspace.
Signal Cable
Power Cord
• The monitor which has applied the DynaFlat CDT offers
creating sharper and cleaner images even at the outer most
edges of the screen.
If your power cord is PC-to-Monitor type, plug the other end of
the power cord into the AC receptacle in the computer.
English - 2
English - 3
OPERATION & ADJUSTMENT
Key Pro cess
Co n t ro l Pa n el
ENGL SH
DEUTSCH
ESPAÑOL
FRAN A S
C
TAL ANO
• Move cursor to the right window on the OSD
window.
• Increase the value of any selected function.
• Move cursor to the left window on the OSD
window.
• Decrease the value of any selected function.
• Launch OSD(On-Screen Display) MENU window.
MENU
• Move cursor to the high window on the OSD
window.
Start
• Increase the value of V.size or V.center.
• Move cursor to the low window on the OSD
window.
• Decrease the value of V.size or V.center.
Ho t Key
BRIGHTNESS
CONTRAST
When you choose the icon
OSD screen.
on the OSD window, you can exit the
•
English - 4
English - 5
OSD Fu n ct io n s
ICON
CONTROL
H. MOIRE
FUNCTION
ICON
CONTROL
FUNCTION
Adjust the horizontal picture moire
cancellation.
LANGUAGE
Select language for OSD (5 languages).
Adjust the vertical picture moire
cancellation.
V. MOIRE
FOCUS
Adjust the position of the display
horizontally(left or right) and vertically
(up or down).
H. CENTER &
V. CENTER
Adjust the focus image.
Choose different preset color temperatures
or set your own customized color
parameters.
Adjust the display width & height at the
same time.
COLOR TEMP
ZOOM
Adjust the left and right margins for more
convex or more concave margins.
Adjust the red gain.
RED GAIN
GREEN GAIN
BLUE GAIN
RED BIAS
PINCUSHION
TRAPEZOID
PIN BALANCE
Adjust the green gain.
Adjust the trapezoid of the screen by
moving the lines inward or outward.
Adjust the blue gain.
Adjust the red bias.
Adjust the green bias.
Adjust the blue bias.
Adjust the side balance when the sides of
the screen are bowed towards left or right.
PARALLELO
-GRAM
Adjust the parallelogram when the screen
is leaning left or right.
GREEN BIAS
BLUE BIAS
Adjust the pin S control when the sides of
the screen are in a S shape.
PIN S Co n t ro l
PIN W Co n t ro l
Adjust the pin W control when the sides
of the screen are in a W shape.
H. SIZE &
V. SIZE
Adjust the width (horizontal size) and the
height (vertical size) of the display.
Adjust the rotation when the screen is
tilted left or right.
ROTATION
DEGAUSS
H. LINEARITY Adjust the horizontal linearity.
Degaussing keeps the monitor free from
unwanted magnetism that can result in
color impurity.
Adjust the vertical linearity.
V. LINEARITY
English - 6
English - 7
SPECIFICATIONS
ICON
CONTROL
STATUS
FUNCTION
CDT Size
19-inch DynaFlat
18-inch
Display horizontal & vertical frequency
and polarity.
Diagonal visible image area
Dot Pitch
0.25 mm
YES : VESA DPMS operation.
NO : NO DPMS operation.
Synchronization
Horizontal 30 - 95 KHz
POWER SAVER
TEST PATTERN
RECALL
Vertical
50 - 160 Hz
Plug and Play
DDC1/2B/CI
Display a RGB Color Bar to determine
whether the screen color is expressed
normally or not.
Power Saving
Power Source
EPA, VESA DPMS, Nutek Compliant
100-240 Vac, 50/60Hz (Free Voltage)
120 W
Power Consumption
Reset the screen to the Factory Preset
Display Settings.
Dimension-W x H x D
(set with stand)
466 x 475.5 x 465mm
Weight-unpacked (lbs/Kg)
Operating Temperature
56.2/25.5
Self Dia g n o sis
10 ~ 40°C /50 ~ 104°F
When the monitor doesn’t display, if you press any key, Self
Diagnosis screen is displayed. Self Diagnosis function checks if
the status of the monitor is No Signal or Out of range.
The specifications are subject to change without notice.
*
No Signal screen is displayed when the
D-Sub signal connector is not connected
or the status of the monitor is on DPMS
mode.
FACTORY PRESET TIMINGS
Resolution
Mode
H.Freq (KHz) V.Freq(Hz)
Remark
(dots
X
lines)
VGA 480
640
720
X
480
400
31.5
31.3
46.9
53.7
60.0
68.7
80.0
91.1
37.5
93.8
60
70
75
85
75
85
75
85
75
75
Non-interlaced
Non-interlaced
Non-interlaced
Non-interlaced
Non-interlaced
Non-interlaced
Non-interlaced
Non-interlaced
Non-interlaced
Non-interlaced
Out of Range screen is displayed when
the applied frequency is under or over
normal range.
VGA 400
X
X
X
X
X
X
X
X
X
VESA 46K
800
600
VESA SVGA 85
VESA 60K
800
600
Normal range
H : 30 - 95 KHz
V : 50 - 160 Hz
1024
1024
1280
1280
640
768
VESA 1024/85
VESA 1280/75
VESA 1280/85
VESA 75
768
1024
1024
480
VESA 1600/75
1600
1200
English - 8
English - 9
DESCRIPTION FOR D-SUB CONNECTOR
TROUBLESHOOTING
Symptom
Check
Signal
Pin
No picture.
Check if power switch and computer power switch
are in the on position.
Red
Green
1
2
Blue
GND
GND
3
4
5
Check if the signal cable is correctly connected to
the video card.
GND-Red
GND-Green
GND-Blue
6
7
8
9
Check if the pins of D subconnector are not bent.
Check if the computer is in the power- saving mode.
+5Vdc
GND-H.Sync
GND-V.Sync
Bi-directional Data(SDA)
Horizontal Sync
Vertical Sync(VCLK)
Data Clock(SCL)
10
11
12
13
14
15
POWER LED is not Check if power switch is in the on position.
lit.
Check if the power cord is correctly connected.
Image is unstable.
Check if the signal cable is suitable to the video card.
Image is not
centered, too small
or too large.
Adjust H&V Size or H&V Center to get the proper
image.
1
6
Picture bounces or a Keep the devices that may cause electrical
10
15
wave pattern is
present in the
picture.
interference away from the monitor.
See the FCC information at the front cover of the
manual.
GND=Ground
*
Color looks blotchy. Operate Degauss once.
Picture is blurred.
Adjust Contrast and Brightness.
Operate Degauss once.
Edges of available
area on the screen
are not straight.
Adjust Geometry Control (Pincushion, Trapezoid..).
English - 10
English - 11
|