Display
B17-5 ECO/B19-5 ECO
Operating Manual
English
Do you have ...
... any technical questions or problems?
Please contact:
•
our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the
•
•
your sales partner
your sales office
The latest information about our products, useful tips, updates etc. is available
FUJITSU B17-5 ECO / B19-5 ECO
Operating Manual
1
3
7
14
23
Notes regarding the DIN EN ISO
13406-2 standard
25
26
VESA, DDC and DPMS are registered trademarks of the Video Electronics Standards Association.
Copyright © Fujitsu Technology Solutions GmbH 2009
All rights reserved, including rights of translation, reproduction by printing, copying
or similar methods, in part or in whole.
Offenders will be liable for damages.
All rights reserved, including rights created by patent grant or registration of a utility model or design.
Subject to availability and technical modifications.
No liability for content or printing errors.
Contents
Contents
Your LCD screen... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transporting the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Energy Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unpacking and checking the delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up an ergonomic video workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjusting the inclination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjusting the rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjusting portrait format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Removing monitor base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting cables to the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting cables to the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Switching the device on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Notes on power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing the monitor settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Changing the monitor settings with the buttons of the control panel . . . . . . . . . . . . . . . . . . . . . . 16
Changing the monitor settings using the OSD menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Notes regarding the DIN EN ISO 13406-2 standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Technical specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
VESA-DDC-compatible VGA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Preset operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Most frequent operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SUB D port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
DVI-D port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
A26361-K1317-Z220-1-7619, edition 2
Contents
A26361-K1317-Z220-1-7619, edition 2
Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
•
•
•
TFT display (Thin Film Transistor; active matrix)
minimal space requirements thanks to slim casing
optimum ergonomic characteristics (totally distortion-free, excellent picture
definition and colour purity right into the corners)
•
•
•
•
high degree of brightness and good contrast
high resolution (1280 x 1024)
presentation of up to 16.7 million colours (in conjunction with an appropriate display adapter)
automatic scanning of horizontal frequencies from 30 to 83 kHz and refresh rates
(vertical frequencies) from 55 to 76 Hz (absolutely flicker-free)
•
•
digital screen controller with microprocessor for storing 28 different display modes
freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
•
•
•
convenient operation via integrated OSD (On-Screen-display) menu
VESA-DDC compatibility
VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device for swivel arm and wall bracket
•
•
•
•
Plug&Play capability
power management for reducing power consumption when the computer is not in use
Compliance with the recommendations according to TCO
the monitor fulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
This operating manual contains important information you require to start up and run your LCD monitor.
A graphics card (display adapter) with VGA interface or a digital display adapter with
DVI interface is required to control the LCD monitor. The monitor processes the data
supplied to it by the display adapter. The display adapter or the associated driver software
is responsible for setting the modes (resolution and refresh rate).
When putting the monitor into operation for the first time, the screen display should be
optimally adapted to the display adapter used and adjusted in accordance with your
Target group
You don’t need to be an "expert" to perform the operations described here. However, please observe
the safety information given in the operating instructions for the computer and in this manual.
In the event of any problems occurring, please contact your sales outlet or our Help Desk.
A26361-K1317-Z220-1-7619, edition 2
1
Your LCD screen...
Further information
Details of how you set the resolution and refresh rate are provided in the documentation
for your display adapter and the associated driver software.
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended.
Because of the technology used (active matrix) an LCD monitor provides a totally
flicker-free picture even with a refresh rate of 60 Hz.
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►
Indicates an activity that must be performed
Indicates a result
ꢀ
This font
indicates data entered using the keyboard in a program dialogue or
command line, e.g. your password ((Name123) or a command used to
start a program (start.exe)
This font
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font
indicates
•
•
terms and texts used in a software interface, e.g.: Click on Save
names of programs or files, e.g. Windows or setup.exe.
"This font"
indicates
•
•
cross-references to another section, e.g. "Safety information"
cross-references to an external source, e.g. a web address: For more
information, go to"http://ts.fujitsu.com"
•
Names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety" Manual
Abc
F10
indicates a key on the keyboard, e.g:
This font
indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
2
A26361-K1317-Z220-1-7619, edition 2
Important notes
Important notes
INoteosrtantnotes
m
p
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety instructions
This device complies with the relevant safety regulations for data processing equipment,
including electronic office machines for use in an office environment. If you have any
questions, contact your sales outlet or our Help Desk.
•
The display surface of the device is sensitive to pressure and scratches. You should therefore
be careful with the display surface in order to avoid lasting damage (scratches).
•
If the device is brought into the installation site from a cold environment, condensation
can form. Before operating the device, wait until it is absolutely dry and has reached
approximately the same temperature as the installation site.
•
When installing and operating the device, please observe the notes on environmental
•
•
To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear.
The device automatically sets itself to the correct voltage within the range from 100 V to 240 V.
Make sure that the local mains voltage is neither higher nor lower than this range.
•
•
Ensure that the power socket on the device and the mains outlet are freely accessible.
The ON/OFF switch does not disconnect the monitor from the mains voltage. To disconnect
fully from the mains supply, disconnect the power plug from the socket.
•
•
•
The device is equipped with a power cable that complies with safety standards.
Use the supplied power cable only.
Lay the cables in such a way that they do not create a hazard (danger of tripping)
and cannot be damaged. When connecting the device, observe the relevant
•
•
No data transfer cables should be connected or disconnected during a thunderstorm.
Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get
inside the device (danger of electric shock, short circuit).
•
•
The device is not waterproof! Never immerse the device in water and protect
it from spray water (rain, sea water).
In emergencies (e.g. damaged casing, elements or cables, penetration of
liquids or foreign matter), switch off the device, disconnect the power plug and
contact your sales outlet or our Help Desk.
•
•
Repairs to the device must only be performed by qualified technicians. Unauthorised opening
and incorrect repair may greatly endanger the user (electric shock, fire risk).
Only use the screen resolution settings and refresh rates specified in Chapter
are in any doubt, contact your sales outlet or our Help Desk.
•
•
Use a screen saver with moving images and activate the power management for
your monitor to prevent still images from "burning in".
If you operate the device with the swivel arm or wall bracket, it must not be turned by 180°.
A26361-K1317-Z220-1-7619, edition 2
3
Important notes
•
The device must only be operated in landscape mode (0°) and portrait mode (90°). The
control buttons are located in the middle of the bottom of the monitor in landscape mode
(0°) and at the left-hand side of the monitor in portrait mode (90°).
•
•
Store this manual close to the device. If you pass the device on to third
parties, you should pass this manual on with it.
We recommend that you place your device on a durable, non-slip surface. In view
of the many different finishes and varnishes used on furniture, it is possible that the
feet of the device may mark the surface they stand on.
•
To ensure sufficient ventilation, the air supply and air outlet openings of
the monitor must never be blocked.
Power cable
Use the supplied power cable only.
Use the following guidelines if it is necessary to replace the original cable set.
•
•
The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.
The cable has to be HAR-certified or VDE-certified. The mark HAR or
VDE will appear on the outer sheath.
•
For devices which are mounted on a desk or table, type SVT or SJT cable sets may be
used. For devices which sit on the floor, only SJT type cable sets may be used.
•
•
The cable set must be selected according to the rated current for your device.
If necessary, replace the original power cable with a regular grounded 3-core mains lead.
Transporting the device
DTR
r
e
a
vt
n
riacsneps,o
p
rtortiaotnion
a
t
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Cleaning the device
Switch off the device and unplug the power plug.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the device.
The display surface of the device is sensitive to pressure and scratches. Clean
it only using a soft, slightly moistened cloth.
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that
has been moistened in mild domestic detergent and then carefully wrung out.
4
A26361-K1317-Z220-1-7619, edition 2
Important notes
CE marking
The shipped version of this device complies with the requirements of EEC
directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC
"Low voltage directive".
Energy Star
EnergyStar
The Fujitsu LCD colour monitor is equipped with a power
management system which reduces the power draw in OFF
mode to less than 1 W. As a result, the LCD monitor satisfies
the requirements of the U.S. Environmental Protection Agency
(EPA).
The EPA estimates that computer equipment uses approximately 5 % of all business
electricity and that this is growing rapidly. If all desktop PCs and peripherals were to enter
a low-power mode when not in use, the overall electricity saving could amount to $ 2 billion
annually. These savings could also prevent the emission of 20 million tons of carbon dioxide
into the atmosphere - equivalent to the discharge from 5 million cars.
As an Energy Star Partner, Fujitsu Technology Solutions GmbH has determined that this
product meets the Energy Star guidelines for energy efficiency.
A26361-K1317-Z220-1-7619, edition 2
5
Important notes
Disposal and recycling
This device has been manufactured as far as possible from materials which can be recycled or
disposed of in such a way that the environment is not damaged. The device may be taken back after
use to be reused or recycled, provided that it is returned in a condition that befits its intended use.
Any components not reclaimed will be disposed of in an environmentally acceptable manner.
The device must be disposed of in accordance with local regulations for disposal of special
waste. The screen background lighting contains mercury. You must observe the applicable
handling and disposal safety regulations for fluorescent tubes.
If you have any questions regarding disposal, please contact your local sales office, our Help Desk, or:
Germany
Belgium
Switzerland
Fujitsu Technology
Solutions GmbH
RECUPEL
Boulevard Reyers, 80
B-1030 Brussels
Tel.: +32 2 / 706 86 16
Fax: +32 2 / 706 86 13
E-mail: [email protected]
SWICOSchweizerischer
Wirtschaftsverband der
Informations-, Kommunikations-
und Organisationstechnik
(Swiss Trade Association for
Information, Communications
and Organisational
Technology). For a list of
SWICO disposal sites, see:
Remarketing and Recycling
D-33106 Paderborn
Germany
Tel.: +49 5251 / 81 80 10
Fax: +49 5251 / 81 80 15
Asia
USA
Taiwan:
Environmental
Protection Administration
Executive, Yuan, R.O.C.
Fujitsu America Inc.
1250E. Arques Avenue
Sunnyvale, CA 94085
U.S.A.
Contact: Bernd Henning
Phone No.: (408) 329-6737
Fax No.: (408) 746-8299
6
A26361-K1317-Z220-1-7619, edition 2
Getting started
Getting started
Unpacking and checking the delivery
The display surface of the device is sensitive to pressure and scratches.
Always hold the device by the casing!
The complete device package includes:
•
•
•
•
•
•
•
•
one monitor
one data cable (D-SUB)
one data cable (DVI-D)
one audio cable
one power cable
one CD with software and documentation
one Warranty Booklet
one "Safety" manual
►
►
►
►
Unpack all the individual parts.
Check the contents of the package for any visible damage caused during transport.
Check whether the delivery conforms to the details in the delivery note.
Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Do not discard the original packing material of the devices. You may need the
packaging in the future if you need to transport your device.
Setting up the device
To ensure sufficient ventilation, the air inlet and outlet openings of
the device must be kept clear.
A26361-K1317-Z220-1-7619, edition 2
7
Getting started
►
Position the monitor so that the eye distance
to the screen (1) is around 50 cm.
1
50 cm
►
Position the monitor for optimum viewing
(1). The monitor should under no
circumstances fall outside the permissible
viewing space (2).
1
0
65
30
30
60
2
65
2
Depending on the situation, it may be advisable to use a swivel arm or wall
bracket (VESA FPMPMI), which are available from specialist dealers. For
this purpose the monitor base must be removed beforehand as described
A26361-K1317-Z220-1-7619, edition 2
9
Getting started
Adjusting the height
The height of the monitor can be adjusted by approximately 120 mm.
►
Grasp the monitor with both hands on the right and left edge of the casing
and move it upward or downward.
Adjusting the inclination
►
Hold the monitor with both hands on the left and right sides of the casing
and move it to the desired angle.
Adjusting the rotation
The monitor can be horizontally rotated by ± 45° from its centre position.
►
Grasp the monitor with both hands on the right and left edge of the casing
and turn it to the desired position.
Adjusting portrait format
The monitor can be rotated from horizontal format (landscape mode) into
vertical format (portrait mode).
►
Grasp the monitor with both hands on the right and left edge of the casing, move it into
the highest position and turn it clockwise until it is in the portrait position.
For you to be able to display the screen contents in portrait mode, your graphics card
will also need to support this function or you will need to use special software.
In the OSD menu you have the option of switching the OSD manually
To reset the monitor to landscape mode, the monitor should be turned anti-clockwise.
The OSD display can be reset again in the OSD menu.
10
A26361-K1317-Z220-1-7619, edition 2
Getting started
Removing monitor base
Before you can use a swivel arm or a wall bracket, you must remove the monitor base.
The display surface is susceptible to scratching!
►
Switch off the monitor and pull the power
plug out of the power socket.
►
►
►
Lay the monitor on its face on a soft surface.
Remove all cables.
To remove the monitor base, undo the
screws on the monitor base.
You can now mount a swivel arm or a wall
bracket in accordance with VESA FPMPMI
using a hole spacing of 100 mm.
ꢀ
For instructions on how to mount the
swivel arm or wall bracket, please
see the documentation for the swivel
arm or wall bracket.
For instructions on how to mount the swivel arm or wall bracket, please see
the documentation for the swivel arm or wall bracket.
A26361-K1317-Z220-1-7619, edition 2
11
Getting started
Connecting the device
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
►
►
Switch off the monitor and the computer.
Disconnect the power plug from the computer.
Connecting cables to the monitor
The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI
connectors for connection to the monitor and to the computer.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
1
1
= Security slot for "Kensington Lock"
►
Select the data cable which is suitable for your computer.
12
A26361-K1317-Z220-1-7619, edition 2
Getting started
0
-
ECO / BASIC
1
2
3
4
5
1
2
3
= Green standby mode switch
= Power connector
4
5
= DVI-D socket (DVI)
= D-SUB socket (VGA)
= AUDIO-IN socket
►
Connect one of the connectors of the data cable to the D-SUB socket or DVI-D socket of
the monitor and secure the plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only one signal source is connected.
►
Insert one plug of the audio line in the AUDIO IN socket on the monitor
and make sure it is properly engaged.
►
►
Plug the power cable supplied into the power connector of the monitor.
Secure the cover over the connections.
A lock (Kensington Lock) can be mounted in the security slot to protect the monitor
from theft. A Kensington Lock is not included with the monitor at delivery.
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the
operating manual for your computer.
►
Connect the data cable to the (active) monitor port on the computer and secure
the plug-in connection by tightening the safety screws.
►
►
►
Insert the other plug of the audio cable in the audio output of the computer.
Plug the power connector of the monitor into a properly grounded mains outlet.
Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is active as standard.
A26361-K1317-Z220-1-7619, edition 2
13
Operation
Operation
Switching the device on and off
2
1
1
= Power supply indicator
2
= ON/OFF switch
Press the buttons from the bottom up.
The colour of the LED indicator changes as follows:
LED indicator
Status
blue
green
Monitor and computer are switched on (normal mode).
Monitor and computer are switched on (ECO mode).
orange
The monitor is not receiving a video signal or is in energy-saving mode.
does not light up
The monitor is switched off (or is in green standby mode - power
consumption in standby and off mode ≤ 0.1W )
Front
Rear
1
2
3
1 = power indicator
2 = ON/OFF switch
3 = green standby mode switch
14
A26361-K1317-Z220-1-7619, edition 2
Operation
In switch position "0" (ECO), green standby mode is activated, in which the monitor
consumes ≤ 0.1 W. If the monitor cannot be switched on and remains dark, the switch
must be set to "-" (BASIC). The monitor then consumes < 1 W in standby mode.
►
Switch the device on using the ON/OFF switch.
Only switch on the computer after you have switched on the monitor.
Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function. Here the monitor does not distinguish between the individual energy-saving
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of
immediately switching into the mode with the highest energy-saving effect.
Stage
Operation
Normal
Power saving mode
ECO
Green Standby
Mode
Compatible
Power supply
indicator
Lights up blue
Lights up green
unlit
Lights up orange
Monitor
Max. brightness
typ. 200 cd/m2
B17-5 : < 17 W
Unlit
Unlit
Power consumption B17-5 : < 24 W
(typical)
reduced to
≤ 0.1 W
reduced to
< 1 W
B19-5 : < 28 W
B19-5 : < 19 W
If your computer detects inactivity (no input), it sends an appropriate signal to the monitor to reduce
the power consumption (energy-saving mode). The power indicator of the monitor changes colour to
indicate the status change. ECO and Green Standby Mode are the preset factory defaults.
Once an input is made at the computer the screen contents are restored.
For detailed information on how energy-saving mode operates, please refer to
the operating manual or technical manual of the computer.
A26361-K1317-Z220-1-7619, edition 2
15
Operation
Changing the monitor settings
When putting the monitor into operation for the first time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. With the OSD menu not
activated, you can make the following settings directly:
EXIT / AUTO
SELECT/ MENU
ECO
INPUT
1
2
3
1
2
= Buttons for the OSD menu (On-Screen
Display)
3
= ON/OFF switch
= Power supply indicator
Performing auto-adjustment of the monitor
EXIT / AUTO
►
Press the
button for about 1 second.
The Auto Processing message appears
ꢀ
Picture quality and position are set to optimum values for your system.
Selecting input signal (D-SUB/DVI-D)
INPUT
button to open the Input select setting window.
►
►
Press the Back /
INPUT
Press the Forwards / ECO button or the Back /
desired monitor connection (VGA or DVI).
button to select the
This setting window can also be called when the OSD menu is locked.
16
A26361-K1317-Z220-1-7619, edition 2
Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
►
Press the Forwards / ECO button to switch the ECO operating mode on or off.
The message ECO on / off is displayed.
ꢀ
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
6500K
temperature
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
SELECT/MENU
button pressed for a few seconds while you
►
Press and keep the
switch on the monitor with the ON/OFF switch.
The message OSD locked / unlocked is displayed.
ꢀ
Proceed in the same way to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
INPUT
►
Press the Forwards / ECO button and the Back /
time and keep them pressed for a few seconds.
button at the same
The message Power button locked / unlocked is displayed.
ꢀ
Proceed in the same way to release the locked ON/OFF switch again.
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
A26361-K1317-Z220-1-7619, edition 2
17
Operation
The OSD menu is available in various languages. The English menu names are
used in the following description (default setting). You can select another language
using the OSD Language function in the OSD Setup menu.
SELECT/MENU
Press the
activate the OSD menu.
►
button to
The main menu appears, with icons
for the setting functions.
ꢀ
The first icon, (Brightness/Contrast), is
highlighted and the associated functions are
visible in the right-hand menu field.
►
►
Press the Forwards / ECO button or
INPUT
the Back /
another icon (e.g. Image adjust).
SELECT/MENU
select the highlighted icon.
button to highlight
Press the
button to
The Image adjust setup window will
be displayed.
ꢀ
►
Press the Forwards / ECO button or
INPUT
the Back /
button to highlight
another function.
SELECT/MENU
►
►
Press the
button to
select the highlighted function.
Press the Forwards / ECO button or
INPUT
the Back /
button to highlight
another function.
EXIT / AUTO
►
►
Press the
button to
exit the function.
Press the Forwards / ECO button or the
INPUT
Back /
function or press the
to return to the main menu.
All changes are stored automatically.
button to highlight another
EXIT / AUTO
button
ꢀ
18
A26361-K1317-Z220-1-7619, edition 2
Operation
If you wish to change other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described below.
OSD menu functions
The OSD menu for analog monitor operation is described below. During
digital operation some functions are not available, as they are not required
due to the digital transmission technology used.
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of the display
With this function you change the brightness of the background lighting.
You can see whether the ECO operating mode is active under the bar for
displaying the brightness setting.
Contrast
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Set the brightness of the display
Black level
Auto level
With this function you modify the contrast of dark colour tones.
Adjust the signal level
With this function you can automatically set the contrast.
SELECT / MENU
The function is executed with the
button.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
A26361-K1317-Z220-1-7619, edition 2
19
Operation
Adjusting the picture size and position
Open the Image adjust window
H-position
V-position
Clock
Adjusting the horizontal position
With this function you can move the picture to the left or to the right.
Adjusting the vertical position
With this function you can move the picture up or down.
Adjusting the synchronisation
With this function you can adjust the picture width in order to eliminate
vertical picture faults.
Phase
Eliminating picture faults
With this function you fine-tune your monitor to eliminate picture faults.
Sharpness
Adjusting the picture sharpness
This function is used to adjust the picture sharpness.
Adjusting the volume
Call the Audio setting window
Volume
Mute
Set the volume for playback with the integrated loudspeakers
Switch the loudspeakers off or on
Setting the colour temperature and colours
Call the Colour setting window
Select the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The
colour temperature is measured in Kelvin (K). You can choose between
sRGB, 6500 K, 7500 K, 9300 K, Native and Custom Colour.
In the user-defined setting you can change the colour ratios of the basic
colours (red, green, blue) as required.
20
A26361-K1317-Z220-1-7619, edition 2
Operation
Adjusting the display of the OSD menu
Calling the OSD Setup adjustment window
Language
Selecting the language for the OSD menu
With this function you choose between English (default setting), French,
German, Italian and Spanish as the language for the OSD menu.
OSDH position
OSDV position
OSDTimeout
Setting the horizontal position of the OSD menu
With this function you can move the OSD menu to the left or to the right.
Setting the vertical position of the OSD menu
With this function you can move the OSD menu up or down.
Setting the display duration of the OSD menu
With this function you can select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically hidden.
OSD Rotation
With this function you switch the OSD menu from portrait mode to landscape
mode and vice versa.
Off = The OSD menu is displayed in portrait mode.
On = The OSD menu is displayed in landscape mode.
Setting functions in the Advanced menu
Call up the Advanced setting window
Input select
Selecting the input signal
This function allows you to switch the monitor from analogue to digital mode
and vice versa, when two signal sources are connected.
This is on condition that the graphic card supports this function.
Activation/deactivation of the DDC-CI
DDC-CI
On = The DDC-CI function is enabled (standard setting)
Off = The DDC-CI function is disabled
Factory Recall
Activating the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
SELECT/MENU
Press the
button to activate the function. The Auto
Processing message is displayed.
A26361-K1317-Z220-1-7619, edition 2
21
Operation
Displaying information
Call the Information setting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal and polarity of the synchronisation signal are
displayed.
22
A26361-K1317-Z220-1-7619, edition 2
Troubleshooting
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated,
the monitor should, if possible, be checked on another computer.
If you are unable to solve the problem, please inform our help desk.
Having this problem?
Check the following points:
No screen display
►
Check whether the main switch at the rear
of the monitor is switched on.
Power indicator does not light up
►
Check whether the power cable on the
monitor is connected correctly.
►
►
►
Check whether the computer is switched on.
Check whether the computer is switched on.
No screen display
Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
Power indicator is lit
►
Press any key on the computer keyboard.
The computer may be in power saving
mode.
►
►
Alter the brightness and/or contrast until you
get a picture.
Message: No Signal
Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
►
Check whether the computer is switched on.
Message: Frequency out of range:## kHz The input signal (horizontal frequency and
/ ## Hz Please change the display mode refresh rate) at the displayed input does not
to 1280 x 1024 with 60 Hz
correspond to the technical data for the monitor.
►
Adjust the video frequency range using the
computer software (see documentation for
the computer or display adapter).
►
Set a different screen resolution using the
computer software (see documentation for
the computer or display adapter).
Picture position not correct
Picture is shaking
The monitor recognises an undefined mode (see
EXIT / AUTO
button to perform
►
Press the
auto-adjustment of the screen.
►
Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
EXIT / AUTO
button to perform
►
►
Press the
auto-adjustment of the screen.
SELECT / MENU
button to
Picture is wrongly adjusted
Press the
activate the Factory Recall function.
The Auto Processing message appears.
A26361-K1317-Z220-1-7619, edition 2
23
Troubleshooting
Having this problem?
Check the following points:
EXIT / AUTO
button to perform
Picture disturbances (vertical lines)
►
Press the
auto-adjustment of the screen.
EXIT / AUTO
button to perform
Picture disturbances (horizontal lines, picture
noise)
►
Press the
auto-adjustment of the screen.
The screen becomes darker
The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
►
Please contact our help desk.
24
A26361-K1317-Z220-1-7619, edition 2
Notes regarding the DIN EN ISO 13406-2 standard
Notes regarding the DIN EN ISO
13406-2 standard
Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum
permitted number of pixels faults is stipulated in the international standard ISO 13406-2 (Class II).
Examples:
Example: A 17"/19” flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 =
1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there
are almost 4 million subpixels (dots) in total. In accordance with ISO 13406-2 (Class II),
a maximum of 6 pixels and also 7 subpixels may be faulty.
A26361-K1317-Z220-1-7619, edition 2
25
Technical specification
Technical specification
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
B17-5 ECO
B19-5 ECO
Dimensions and weight
Visible diagonals
Dot pitch
43 cm
48 cm
0.264 mm
337.9 mm
270.3 mm
1280 x 1024
373 mm
405 mm
209 mm
453 mm
436 mm
212 mm
approx. 5.2 kg
28
0.294 mm
376.3 mm
301 mm
1280 x 1024
412 mm
409 mm
209 mm
453 mm
464 mm
212 mm
approx. 5.9 kg
28
Image size
Width
Height
Maximum resolution
Dimensions incl.
monitor base
Width
Height
Depth
Width
Height
Depth
Dimensions of box
Weight (without packaging)
Storable display modes
Pixel error classes
according to
Class
II
II
ISO 13406-2
Accessories
Power cable (1.8 m)
D-SUB data cable (1.8 m)
DVI-D data cable (1.8 m)
Audio cable (1.8 m)
Electrical data
Video
Analogue
Digital
positive, 0.7 Vss, 75 Ω
DVI-D
Synchronisation
Horizontal frequency
Refresh rate
Separate Sync. TTL, positive or negative
30 kHz .... 83 kHz (multi-scanning)
55 Hz .... 76 Hz
Max. pixel rate
Power supply
165 MHz
switches automatically
100 V – 240 V, 50 Hz – 60 Hz
Total power
consumption
Normal operation
< 24 W in normal operation (17")
< 28 W in normal operation (19")
≤ 0.1 W in Green Standby Mode
1.0 W left; 1.0 W right
Energy saving mode
Max. sound output
26
A26361-K1317-Z220-1-7619, edition 2
Technical specification
Environmental conditions
Environment class 3K2, DIN IEC 721
Rated range of operation
15 °C .... 35 °C
Humidity
20 % .... 85 %
5 °C .... 35 °C
Limit range of operation
Humidity
20 % .... 85 %
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the computer is equipped with a
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.
Preset operating modes
The picture position and size have been optimised at the factory for the operating
modes listed above. Depending on the graphics card used, it may be necessary
to adjust the display position or size. In this case you can change and save the
Most frequent operating modes
Horizontal frequency
Refresh rate
Screen resolution
720 x 400
31.5 kHz
70 Hz
31.5 kHz
60 Hz
640 x 480
37.5 kHz
75 Hz
640 x 480
37.9 kHz
60 Hz
800 x 600
46.9 kHz
75 Hz
800 x 600
48.4 kHz
60 Hz
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
60.0 kHz
75 Hz
64.0 kHz
60 Hz
79.9 kHz
75 Hz
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended.
Because of the technology used (active matrix), an LCD monitor provides a totally
flicker-free picture, even with a refresh rate of 60 Hz.
A26361-K1317-Z220-1-7619, edition 2
27
Technical specification
SUB D port
5
1
10
6
15
11
Pin
1
Meaning
Video input red
Video input green
Video input blue
Ground
2
3
4
5
Ground
6
Video ground red
7
Video ground green
Video ground blue
+5 V (DDC)
Sync. ground
Ground
8
9
10
11
12
13
14
15
DDC Data
H. sync
V. sync
DDC Clock
28
A26361-K1317-Z220-1-7619, edition 2
Technical specification
DVI-D port
1
9
17
Pin
1
Meaning
TMDS Data2–
TMDS Data2+
TMDS Data 2/4 Shield
not connected
not connected
DDC Clock
2
3
4
5
6
7
DDC Data
8
Analog Vertical Sync
TMDS Data1–
TMDS Data1+
TMDS Data 1/3 Shield
not connected
not connected
+5V Power
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Earth
Hot Plug Detect
TMDS Data0–
TMDS Data0+
TMDS Data 0/5 Shield
not connected
not connected
TMDS Clock Shield
TMDS Clock+
TMDS Clock–
A26361-K1317-Z220-1-7619, edition 2
29
|