COLOUR
TELEVISION
AMIRA32HDBLK
ENGLISH
Important Information
The LCD display panels are manufactured using an extremely high level of precision technology,
however sometimes some parts of the screen may be missing picture elements or have luminous
spots. This is not a sign of a malfunction.
Cleaning the screen and the cabinet...
After turning off the power, clean the screen and the cabinet with a soft, dry cloth. We recommend
that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause
damage.
Disposal...
The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury, when the
set reaches the end of its useful life please dispose of it in accordance with Local Government
Regulations or at a recycling centre.
-3-
Your Television
We would like this product, which has been manufactured in modern facilities in accordance with
total quality principles, to offer you the best performance.
Therefore, we would like you to read this entire manual carefully before you use your product and
keep it for future reference.
Special Features
• Available for cable broadcasts
• PIP (Picture in Picture) Feature from AV
• Wide angle of vision
• Scart socket, AV Socket and external sound system connection
• S-VHS and Cinch inputs for S-Video connection
• PC connection
• Low energy consumption
• AVL
• ATS
• Programmable power off
• Graphic equalizer
• The feature of sharpness in Colour Transitions (CTI)
• Sharpness feature and picture resolution (LTI) in the black-white transitions
• A clear Picture made possible by the Digital Comb Filter
• On screen viewing of all settings, program numbers and all the processes
• Manual Fine Tuning
• 100 Program memory
• Infrared Remote Control equipped all the functions
• Child Lock
• Feature of viewing the NTSC broadcast to be entered via Scart
• Easy performance of the processes via the advanced menu system.
• Ability to choose 26 different menu languages.
• HDMI feature
• HDCP feature
• HD-Ready
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
-4-
For your security
This device was designed and manufactured in line with international standards of security. However,
it is required to be careful for obtaining the best results and ensuring security as in every electrical
appliance. Hence, please read the following information for your own security. This information is
for general purposes, it has been prepared to provide you with assistance concerning all the electrical
products and some of them might not be related to the products you have purchased.
DO NOT COVER the ventilation openings of the device
with items such as newspapers, table-clothes, curtains,
etc. Overheating causes damage and shortens then
physical life of the device.
Air Circulation…
To ensure adequate ventilation, please leave a
clearance area of at least 10 cm. around the television.
This clearance prevents the TV from being overheated
and consequently incurring damage. Using the device
in dusty environments should also be avoided.
DO NOT ALLOW any dripping, sprinkling of fluids or
placing of any objects filled with water such as vases
on the electrical devices.
Heat Damage…
DO NOT PLACE on or near the device any hot objects
or items with exposed fire such as candles or any night
lamps. The high temperature might melt plastic parts
and cause fire.
Your TV might be subjected to damage under direct
sunshine or when you leave it beside a heater. Please
abstain from using the product in very hot or humid
settings or in the places where there is the possibility
for the temperature to decrease to the degrees that
are lower than 5°C (41°F).
DO NOT USE makeshift stands and NEVER EVER
attach the legs using wooden screws. To ensure full
security, always set up the stands or stand legs
approved by the manufacturer, using the connection
elements supplied by the manufacturer in accordance
with the instructios.
Network Supply…
The required network supply for this device is 230V~50
Hz AC. Your television set was manufactured to operate
with the power cable provided in the accompaniment.
Never ever connect it to a DC source or to another
source of power. MAKE SURE that the electric cable
is not clamped under the TV. DO NOT DISCONNECT
the network connection plug of this device; since this
plug is fitted with a special Radio Interference Filter,
the product performance might decline when there is
no plug. IF YOU SUSPECT ANYTHING, PLEASE
REFER TO A SPECIALIZED ELECTRICIAN.
Since that might lead to enduring loss of hearing, DO
NOT USE the headphones at very high rates of volume.
DO NOT LEAVE the device powered on when there
is no one around if it is not clearly indicated that it can
be used with no one in presence or if does not have
a standby mode.
Power off the device using the switch on it and make
sure that the other people in your family are also aware
of this. It might be necessary to make special
arrangements for the weak and disabled people in the
family.
Things to be Done...
Please READ the operation instructions before
attempting to use the device.
If you have any doubts as to whether the operation of
the device is normal or not or if the device has been
damaged in any way, DO NOT RESUME THE
OPERATION. Power off the device, pull the plug and
refer to the vendor.
MAKE SURE that all the power connections (network
communication, extension cables and the connections
among the device components) have been made
properly and in connection with the manufacturer's
instructions. Before making or changing the
connections, firstly power off the device and take off
the power network connection plug.
MOST IMPORTANT OF ALL – NEVER EVER allow
anybody, especially the children to insert anything
into the holes on the case or into any other
openings. In such cases, deadly electric shocks
might occur.
NEVER EVER make any estimations concerning
any electrical device and do not take risks. It is
better to be on the safe side rather than falling in
sadness in the aftermath.
If you have any doubts as regards the installation,
operation or safety of the device, please REFER to
the vendor.
BE CAREFUL about the glass panels and covers on
the device.
AFTER TURNING OFF THE POWER SWITCH TO
TURN OFF THE TELEVISION COMPLETELY,
DISCONNECT THE POWER CABLE FROM THE
PLUG.
Things not to be Done...
Since that will expose the components loaded with
dangerous voltage, DO NOT REMOVE any fixed
covers.
-5-
Start
Remove your television carefully out of its box.
You can keep the package of your television to
use it later on.
3. Press the Main power on/off button
located on the LCD TV..
4. To power on your television, press
any numerical key on the remote control
Contents of the box
• Accessory box
• Power cable
• Remote Control
• 2 batteries
7
or the key “
“/”
“.
For this process, you can also use the
TV. buttons found on the panel of your
television. The picture will be visualized
on the screen after a while.
Note: The Scart, , HDMI, VGA and RCA cables
are not supplied with the device.
Note: If you are not going to use your television
for a long period of time, make sure to switch it
off from the power on/off button.
Antenna connection
Initial power on and settings performance
To set up your television, read the parts on the
TV controls and performance of the broadcast
settings.
Batteries
Open the lid of the battery compartment and
make sure you have placed the batteries in the
correct direction.
For this remote control, the battery types UM-4,
IEC R03 or AAA 1.5 V are suitable.
If you use a coaxial cable (round cable) of 75
Ohms as an antenna cable, connect the antenna
plug directly to the antenna input located on the
TV.
The motorized vehicles, energy and
telecommunication lines affect your antenna.
Therefore, be careful about installing your
antenna away from these and metal surface in
such a way that it shall not swing.
Do not throw your old batteries into the fire,
discard then in the waste areas dedicated to this
purpose.
Do not have your antenna cable longer than
required and do not shape it in a roll. Make sure
that it is not cramped while passing through a
window or door.
Do not use the used, old batteries with new ones
and different types of batteries together.
Your antenna and cable might be affected by
natural phenomena such as rain, wind, smoke
and humidity over time. Check periodically your
antenna and equipment.
The performance of the remote control will be
reduced at a distance of 8 meters from or at an
angle of 30 degrees beyond the centre of the
TV.
Powering on your set and the
initial use
1. Insert the power cable plug supplied with the
device into the socket.
2. Insert the power cable into the power supply
input located on the back panel of the LCD TV.
Note 1: Your TV will go to stand-by mode in five
mimutes if there is no broadcast signal
Note 2: YourTV is equiped to oparate with TV
buttons in case your R/C is broken or the batteriesare
exhauseted.
-6-
Control Unit
TV Control Panel
Menu button.
MENU
Program Down/Up button
P-
P+
SOURCE
TV/AV
Source selection button.
Main Power on/off button
Volume Down/Up button.
Stand by indicator
V-
V+
External Connections
Component video input (Y)
Component video input (Pb)
Component video input (Pr)
Main Power Input
AV1 scart
Or
Component sound input (L)
Component sound input (R)
R
AV2 scart
HDMI input
Antena Input
HDMI
VGA (PC connection input)
PC sound input
S-VHS Input
SPDIF Digital audio output
PC
AUDIO-IN
Sound input CINCH connector (Left/L)
Sound input CINCH connector (Right/R)
Stereo Headphone socket
Video output CINCH connector
Sound output (Right/R)
Sound output (Left/L)
Note:
•
Please do not use the video RCA and S-Video connection simultaneously, in that case, these
two devices might influence the picture quality of one another.
•
RGB offers the best picture quality over the Scart.
-7-
32”
Panel Size
32” 16:9 TFT-LCD
WXGA
PanelType
STD.
STD.
STD.
Scart 1
Scart 2
Headphone socket
Audio/Video RCA
(In/Out)
STD.
S-Video socket
STD.
STD.
YUV (Video/Audio)
Component Input
HDMI
STD.
STD.
VGA Input
STD.
STD.
PC Sound Input
SPDIF Digital audio output
STD: STANDART
Remote Control
Picture Format selection button
Stand-by On/Off button
Temporary sound mute (Mute) button
Picture Mode selection button
PAT (Picture and Teletext)
Mode Power On-Off button
PIP size selection button
PC mode access button
PC mode access button
PAT
Equalizer selection button
PIP position selection button
PIP/PAP On-Off button
PIP SEL.
AV
PIP POS.
PC
PIP SIZE
TV
AV modes selection menu button
1
4
2
5
8
0
3
6
Numeric buttons
7
ZOOM
9
SWAP
Final program selection button (SWAP)
Program forward selection button
ZOOM mode selection button
PR-
PR+
Program down button
Upward movement button (Menus)
VOL+
VOL-
Volume enhancement button
Volume turn-down button
OK/
FREEZE
Left movement button (Menu)
Right movement button (Menus)
MENU button
Confirmation(OK) and Temporary
picture freeze button (Freeze)
Info / Txt index page button
MENU
i
?
Txt Question/Answer button (Reveal)
Txt Stop button (Hold)
Downward movement button
Teletext page enlarge button (Double)
Red teletext button
Blue Teletext button
TEXT/
MIX
Green teletext button
Teletext / Mix selection buttons
Sub page button (SUB PAGE)
Yellow teletext button
UPDATE Button/Teletext time
-8-
Performing the initial power-on settings
TV controls:
Temporary On-Off (STAND-BY)
Return to Selected Button Program (SWAP)
When you press the red ( ) stand-by
If you would like to return to the program
you watch by pressing a single button
while in any program, press the button
button (Temporary power on-off function)
located on the upper right hand side of
your remote control of your television
when it is switched on; the sound and
the picture will go off. In the stand-by
function, the power indicator of your
television will glow more. To switch your
PR+
PR-
(
). When you press the button (
)
while in any program or AV, it directly
switches to the program you selected. If you
press the same button again, it switches to the
program you last viewed. If you press the button
television back on, either press the same button,
any of the digital buttons or the (
buttons.
)/(
)
(
) while the PIP window is open, the main
screen and the PIP screen swap places.
Caution!
PR 11
PR 01
PR 01
If you are not going to use your television for a
long period of time, make sure to switch it off
from the main power button.
Main Menu
Press the ( ) button. The Menu including
all the setting menus will be visualized
on the screen. Navigating through the
Menu titles with the up / down movement direction
buttons ( )/( ) and pressing the up / down
direction button ( )/( ), you may select the
menu you would like.
Program selection
PR+
You may enter whichever program
number you would like by pressing the
PR-
buttons (
)/(
) located on your
television and your remote control. To
select the programs that are over 9, you
can use the Numerical buttons. You may
enter the number of the program you
would like to select using the numerical
buttons. For example, to switch to the
program number 12, press relatively the
buttons number 1 and 2 found on your
In the event that you wish to exit the application
at any given stage, simply press the ( ) button.
Tuning and storing the programs on
your television
You can either tune the programs
automatically or manually storing them in
your television.
remote control.
Note:
PROGRAMTABLE
If your television does not receive any
broadcast for a period of 5 minutes, it
automatically switches to the stand-by
position.
P 00
P05TRT1
P06SHOW
P 07
P10
P11
P12
P13
P14
P 01
P02TRT1
P03TRT1
P04TRT1
P 08
P 09
ODS is displayed on the screen.
SKIP
MOVE
NAME
DELETE
OK
MENU
SELECT
BACK
Temporary sound mute (MUTE)
To temporarily mute the sound of your
television, press the ( ) button. In that
case, the sign ( ) will appear on the
screen. When you press the same button
for the second time, the sound will be
on again. If you press the button ( ) while in
the Mute mode, the sound level is increased
and the Mute position is aborted.
-9-
Automatic tuning and storing in the
memory the TV channels via Autoprogram
COUNTRY SELECTION
BELGIUM
HUNGARY
IRELAND
ITALIA
PORTUGAL
SCHWEIZ
SUOMI
CZECH REP.
DANMARK
DEUTSCHLAND NETHERLANDS SVERIGE
The channels located via the
autoprogram (Automatic Tuning System)
feature of your television are
automatically lined up.
ELLADA
ESPA
FRANCE
NORGE
TÜRK‹YE
U. K.
Ñ
A
ÖSTERREICH
POLSKA
. . . . .
OK
START AUTOPROGRAMMING
MENU
BACK
is done as the selected country channels
with teletext and transmitting the channel
name information ranking the first,
followed by all the channels not
transmitting the name information with
teletext and the ones without teletext
and finally the foreign channels that do
not transmit the name information in the
teletext.
AUTOPROGRAM
SEARCHING
2%
MENU
STOP
Manual tuning and storing of the
television channels:
If you already know the Channel
number:
Press the ( ) button. Move onto the channel
settings menu by pressing the down movement
button ( ). When you select the autoprogram
Press the ( ) button. Move onto the
c h a n n e l settings menu by pressing
the down movement button. Go onto the
menu with the ( ) button. Select the
system in which you would like to make
the search from among the system tabs.
tab by pressing the Up/down direction ( )/(
)
buttons and pres the button ( ), the autoprogram
menu will be visualized on the screen. In the
country tab, select the country of which you
would like to watch the broadcast in priority by
pressing the right/left direction buttons ( )/( ).
Then, start the autoprogram operation by
pressing the ( ) or ( ) button.
Enter the Channel tab by pressing the
movement button ( ) below. Pressing
the right-left movement buttons ( )/( )
or ( ) on your remote control, select
the “S” for cable channels and “C” for
broadcasts received via the antenna.
Move onto the program no. tab and
select the program in which you would
like to have the Setup made via the
numerical buttons.
The channels will automatically be scanned and
the channels that have broadcast shall started
to be entered into memory as of the program
that is selected on the channel settings menu.
At the same moment, the Auto-program prompt
menu will be displayed and the mark indicating
the position in which the Automatic Setting
function is found will appear. To stop the process
at any given time, please press the ( ) button.
The Program table will appear on the screen
after the automatic search is over.
You can assign any channel to any program
number you would like from among program
numbers that have been stored in the memory
as described in the part Program Table.
If the broadcast viewed on the screen is of your
desired quality, firstly come onto the storing tab
via the downward movement ( ) button to store
in the memory the process you have made and
select it with the ( ) button. The prompt ‘stored’
shall be briefly displayed.
The channel will be stored according to the
program number of your choice. You can tune
and store in the memory the other channels in
the same way. In the event that you wish to exit
the channel settings menu for any reason, simply
press the ( ) button.
SETUP
SYSTEM
BG
C - -
0
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
P 01
AUTOPROGRAM
MENU
SELECT
EXIT
-10-
Fine Tuning
If the current channel requires Fine
SETUP
Tuning, then select the fine tuning tab
SYSTEM
BG
C - -
0
by using the downward movement button
CHANNEL
FINE TUNE
SEARCH
(
) in the Channel Settings menu.
Using the right-left movement ( )/( )
buttons on your remote control, adjust
the broadcast displayed on the screen
to your desired quality. Under normal
circumstances, you will not feel the need
to use the Fine Tuning function. The
AFC values of your television will
automatically adjust and lock themselves
to the channel. However, you might
need it in case the television transmitters do not
operate according to the standards. To store in
the memory the settings you have made, select
the Store option and press the right button ( ).
PROGRAM NO
STORE
P 01
AUTOPROGRAM
MENU
SELECT
EXIT
If you do not know the channel
number
Press the MENU button. Move onto the
channel settings menu by pressing the
down movement button. Select the
program in which you would like to
perform an Installation using the right-
left movement ( )/( ) or numerical
buttons. Select the system in which you
would like to make the search from
among the system tabs. Enter the
System tab by pressing the direction
button ( ) below. Here, your television
can be set to a single system and you
can also select from among more than
one systems via the ( )/( ) buttons.
(option) Move from here to the channel
tab via the downward movement button
SETUP
SYSTEM
BG
C - -
0
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
P 01
AUTOPROGRAM
MENU
SELECT
EXIT
Program Table
(
)
Press the
button. Move onto the
Program Menu by pressing the downward
movement button. When you press the
button ( ), the program table will appear
on the screen.
(
). Pressing the ( ) keys on your
remote control, select 'S' for cable channels and
'C' for broadcast received from the antenna;
select the search tab with the downward
movement button ( ) and scan the channels
in ascending order with the Right direction button
Switching the locations of the program
channels that have already been
stored:
Select the program you would like to
relocate by pressing the upwards-
downwards ( )/( ) or Right-left direction
(
(
) and in descending order with the left direction
) button. If the channel that is found is of your
desired quality, select the storing tab. Then store
it in the memory pressing the button ( ).
Repeat the same procedure also for the other
channels by selecting the program number of
your choice from among the program no. tab.
buttons ( )/( ). Press the “GREEN”
colored button. The cursor on the selected
program will blink.
the other program to which you would like
to relocate it with the Upwards-downwards
(
)/( ) or Right-left direction buttons
If there is need to perform Manual Fine Tuning
on the current channel or to name the current
channel, refer to the related parts.
( )/( ). Finish the relocation process by
pressing the “GREEN” colored button. The
channel in the first program number you
selected has been moved to your second
selected program number and the
channels between both program numbers
have been shifted to the initially selected
program number.
-11-
Deleting a program that has been
To name the programs
The channels names might be
stored:
automatically displayed on the programs
in the table via ATS, yet the channel
number might also be displayed instead
of the channel name.
Select the program you would like to delete
by pressing the upwards-downwards
(
)/( ) or Right-left direction buttons
You can assign your program or
programs of choice the names that have
a maximum of five characters. Select
the program you are about to name by
pressing the Upwards-downwards
( )/( ). Press the “blue” colored button.
The blue buton on the menu will blink for
approval. You may perform the deletion
process by pressing the “Blue” button or
you may abort the deletion process by
(
)/( ) or Right-left direction buttons
( )
pressing the button
.
( )/( ). Press the “Yellow” button. An
empty space appears beside the
channel for which you would like to
specify name information. Here, choose
the letter, number or sign that you would
like using the Up-down direction
Once you pres the “Blue” button, the
selected program has been deleted and
all the following channels have been
transferred to the previous program
number.
(
)/( ) buttons. For the second
character, press the Right-left button ( )/( ) and
select the letter, number or sign you would like
PROGRAM TABLE
again by the Upwards-downwards ( )/(
)
P 00
P 05 TRT1
P 06 SHOW
P 07
P 10
P 11
P 12
P 13
P 14
P 01
buttons. After entering all the characters, store
the name you have written in the memory by
pressing the button “Yellow”.
P02 TRT1
P03 TRT1
P04 TRT1
P 08
P 09
To write names for any of the other programs,
simply repeat the above procedure. In the event
that you wish to exit the application, simply press
the ( ) button.
SKIP
MOVE
NAME
DELETE
OK
MENU
SELECT
BACK
If the program is not renamed, then the channel
number of that program shall be automatically
displayed.
Changing the order of a program that
has been stored in memory:
The settings on your new television:
Setting up the Sound Menu
In the event that you do not wish to come
across certain programs while navigating
through the channels using the
You may perform the sound setting using the “
VOL+” or “VOL-“ buttons on your television or
the ( ), ( ) buttons on your remote control.
You can perform the other sound settings by
entering the Sound menu. For this purpose,
press the MENU ( ) button on your remote
control. Select the sound menu tab ( ) using
the direction button. You can select in this menu
whichever you would like for performing a process
from among the titles.
(
)/(
) buttons, then you can use
that function. Select the program to be
hidden by pressing the upwards-
downwards ( )/( ) or Right-left direction
buttons ( )/( ). Press the “Red”colored
button. The information name of the
program to be skipped shall appear in red.
You may perform this procedure for more
than one programs. To see the skipped
program, directly enter the program
number via the numbering buttons. To
cancel the program skipping process,
press once again the “Red” colored button.
SOUND
VOLUME
BALANCE
SOUND TYPE
SOUND MODE
AVL
MONO
NORMAL
OFF
EQUALIZER
HEADPHONE
MENU
SELECT
EXIT
-12-
Balance: To adjust the sound balance between
the right and left loudspeakers to the desired
level, select the balance tab by using the
downward direction ( ) button. Using the
right/left direction ( )/( ) buttons, adjust the
balance.
Note: You can choose the equalizer options
directly using the ( ) button on your remote
control.
You can exit the Equalizer display by pressing
the ( ) button at any given time.
EQUALIZER
MUSIC
SPORTS
CINEMA
SPEECH
USER
Sound type: The program you watch might be
stereo or in two different languages. Using the
Right/left direction buttons ( )/( ) in this menu,
you can select Mono/Stereo or Dual-I/Dual-II
language.
120 500 1.5
5
10
Hz Hz kHz kHz kHz
CHANGE
SELECT
MENU
BACK
Sound mode: If you would like to add some
depth to the sound of the broadcast you are
watching, select Spatial effect option with the
( ) button. For products with the Dolby virtual
specification, you may select the Dolby Virtual
option.
Picture Set up:
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
AVL:Television transmitters have different sound
levels. This can be noticed from the different
volume levels that can be heard while switching
from one program to another. Using the right/left
direction ( )/( ) buttons, switch it to On. The
AVL (Automatic Volume Limiting) function
maintains the same sound level as you switch
from program to program. Select the option Off
to cancel it.
Headphones: By connecting the headphone
unit to your television you can listen to the
program sounds independently from your
television. To turn up and down the headphone
sound level, you can adjust the sound level by
using the Right-left movement ( )/( ) buttons
in the Sound tab. When you want to hear the
sound from the headphone only, just press the
SHARPNESS
COLOUR TEMPERATURE NORMAL
MENU
SELECT
EXIT
Enter the Image menu by pressing
MENU
the button ( ) on your remote control.
Using the upwards/downwards
direction buttons ( )/( ), you can
select whichever setting title you would
like and adjust their levels with the
Right/left direction ( )/( ) buttons.
The picture brightness, contrast, color
intensity and Sharpness levels can all
be adjusted according to your desire.
(
) button on your remote control.
The changes you have made in the
image settings shall be stored in the
memory with no need for further
operation.
Equalizer: Selecting the Equalizer tab in the
Sound menu, press the right movement ( )
button. The equalizer setting function will be
displayed. Using the right/left movement, up/down
direction buttons, you may select one of the
options which enhance the sound effect
depending on the feature of the program you
watch, which are exclusively pre-programmed
and unchangeable for Music, Sports, Movies
and Speech and in which you can totally adjust
the personal option.
DNR: You may reduce the interference
and noise formed in the image by
using this feature. Set it to On to
activate the feature.
To adjust the user option, select the personal
option and press the right arrow button. You
can adjust the frequency levels with the ( )and
(
) buttons. You can select 120Hz, 500Hz,
1.5KHz, 5KHz and 10KHz frequency bands with
( ) and ( ) buttons. Storing the adjustment levels
in memory press the ( ) button to exit the user
option. You may exit the equalizer menu by
pressing again the ( ) button.
-13-
Automatic
Smart picture: You can select one of the non-
adjustable default settings in the
memory (Picture Mode) by pressing
the “ “ button on your remote control.
Soft, Natural and Rich are default
values; the user, however represents
the values you saved in memory.
Some movie channels might
broadcast in the 16:9 format. If
you would like to see this format
automatically, then select
AUTOMATIC. In that case, the
mark AUTO 16:9 appears on
your screen.
16:9
Picture Format: You can visualize the
broadcast picture you watch in this
Please use this setting for
watching the broadcasts in wide
screen DVD, wide screen
picture video cassette or 16:9
format. Since various screen
formats such as 16:9, 14:9, 20:9
etc. are used, black stripes
might be formed on the lower
and upper parts of the screen.
option in a format of your choice. You
can visualize them in the Automatic,
16:9 14:9, Subtitle, Letterbox and 4:3
formats. The picture format or 16:9 or
4:3 formats can be selected in the
COMP/HDMI/PC modes. Besides, the picture
will appear in the 16:9 format when the PIP is
on or while in the positions TXT-TXT/MIX. You
can perform the same process via the ” “ format
selection button found on your remote control
without entering the picture menu. In that case,
the prompt 16:9 or 4:3 appears in the centre of
the screen.
4:3
Use this setting to watch the
broadcasts in the 4:3 format.
Since the use of certain functions in order to change
the picture sizes for collective display or commercial
purposes (modifying the height and width etc.) will be
deemed an infringement of the picture copyrights, penal
procedure can be carried out as required by the relevant
laws.
Tint: When NTSC video is entered via Scart,
you may make the Colour Tone setting. The tint
option is not seen in the menu when you have
not entered such type of a video. When a NTSC
video is connected via the Scart, this option
becomes active and it is viewed in the menu.
Features
Wide Screen Display
The TV can be visualized in different formats
FEATURES
according to the broadcast made. Pressing (
)
button, selecet the features Letterbox, Subtitle,
Automatic, 16:9 ,14:9 and 4:3. Attention
Please: When the MENU button is pressed, the
menu will change as it is visualized on the screen.
This condition ensures that the menus do not
extend beyond the borders of the visualized
parts of the screen.
LANGUAGE
TIMER
ENGLISH
OFF
CHILD LOCK
MENU
SELECT
EXIT
14:9
This is the movie format.
MENU
Press the button
(
)
on your remote
Letterbox
control. Select the features menu tab
using the direction button ( ). You can
select from among the titles in this menu
for which you would like to perform a
process using the Upwards/Downwards
While watching a ‘’Letter box
formatted’’ film / video cassette,
this setting will eliminate or
minimize the black stripes on
the background by zooming in
the picture and without diffusing
it.
direction
(
)/(
)
buttons.
Subtitle
If the subtitles are transmitted
in the ‘’letterbox formatted’’
broadcast, then this setting will
push the picture upwards in
order to ensure the entire written
text to be visualized.
-14-
Menu language: Selecting the Menu
language tab, press the right movement
Note: The Zoom mode does not operate while
there is a PIP picture in the screen and in the
COMP/HDMI/PC inputs. The Zoom mode is
aborted once the program has been switched,
Teletext is entered or PIP is activated.
OK/
FREEZE
(
)
button. The menu languages shall
appear in the menu in order, select your
desired language using the Right-left
movement buttons ( )/( ). Press the
(
)
FREEZE: You may freeze the program picture
button. All the setting displays of your
television will be visualized in the
language that you selected.
you are watching thanks to this feature.
For this purpose, press the ( ) button
OK/
FREEZE
on your remote control while there are
no menus on the screen. The program
picture will freeze until the same button
is pressed for the second time.
Child lock : If this feature is turned On,
the program that is found is locked, the
image and sound is off, the locked
program is skipped while zapping
Note: The Freeze feature also freezes PIP
screen while there is a PIP picture on the screen.
programs with the (
)/(
) buttons.
Using the PIP (Picture in Picture) feature;
Timer: Your television deploys the feature of
being able to be turned off at the end of a period
of time that you detected and to be turned on
again after a time you designated. To ensure
that your television turn off at the end of your
desired time period, select the timer tab. Select
your desired period of time with the numerical
buttons. Determine the time for turning on in the
same way. Enter in the program no. tab the
channel from which you would like the TV to be
turned on. At the end of the time you specified,
your television will automatically switch to stand-
by. It switches to the selected program at the
end of that time while the TV is on.
Press the ( ) button on your remote
control. The PIP screen appears on the
PIP SEL.
screen. According to the selected source,
a window will be opened inside the main
picture and a sub-screen will be
displayed.
You can return to PAP mode by pressing the
button ( ) again. You can return to the normal
mode by pressing the ( ) button in the PAP
mode.
TIMER
CLOCK
13:47
- - : --
- - : --
P 01
ON TIME
To change the source on the PIP screen in the
PIP or PAP mode, you may use the up/down
OFF TIME
PROGRAM NO
(
)/( ) direction buttons.
Note1: All the sources can be selected in the
PIP while there is TV or AV on the screen.
However, only TV/AV can be watched while there
is COMP/HDMI/PC on the main screen.
Note2: The PIP source information available in
the TV/AV mode and the PIP source information
available in the COMP/HDMI/PC mode are the
same. Hence, the PIP source also changes once
the main screen has been switched from TV/AV
to COMP/HDMI/PC.
0-9
MENU
BACK
ZOOM: To activate this option, press the button
(
) on your remote control while
ZOOM
watching a program picture. During the
zooming process, the image is zoomed
out in three stages in a centre-oriented
way. To move up/down ( )/( ) or
right/left ( )/( ) on the picture in this
position, press the ( ) button on your
remote control. Then, press the key for
the direction in which you would like to
move. In the event that you wish to exit
the Zoom mode for any reason, simply
press the ( ) button. By pressing the
( ) button, you may return to the normal
mode after the three stages.
PIP Position:
With this option, you can change the
position in which the PIP window is
PIP POS.
visualized on the screen. For this
purpose, you may change the PIP
Position by pressing the Right/Left
direction ( )/( ) buttons after pressing
the
button while there is a PIP picture on
OK/
FREEZE
the screen.
MENU
-15-
In order to switch your television to the teletext
broadcast, please press the ( ) button in a
program that has teletext broadcast. To switch
back to the television broadcast, press the same
button.
Once you have switched to the teletext broadcast,
the index page will initially be visualized (Page
100). In this page, the titles of the topics in that
teletext broadcast and the initial page numbers
do appear.
PIP Dimension:
With this option, you may zoom in and
zoom out the PIP window size. For this
purpose, you may change the PIP size
PIP SIZE
by pressing the ( ) button while there
is a PIP picture on the screen.
Page selection
PAT Mode:
While watching a broadcast on your
television, you can enter the PAT (Picture
and teletext) mode pressing the (
button on your remote control. Thanks
to this feature, you can also follow the
teletext broadcast if there is also a teletext
broadcast in the program that is being watched.
To abort this mode, press again the ( ) button
found on your remote control.
PAT
To be able to view the page you would
like on the screen, type in the number
0
)
of that page using the numerical keys.
You can see the number you have
9
entered on the left side of the upper
title tab.
When you would like to skip the pages
one by one, you can go to the next
page pressing the ( ) key and to the
previous page pressing the ( ) key.
Flickering of the picture can occur in PIP, PAP
and PAT modes.
i
To return to the Index page, press the
button ( ).
Teletext viewing button (MIX) in the TV
picture
By pressing this button, you can watch
the teletext information and the TV
TEXT/
MIX
broadcast on top of one another and
Teletext
together. In this way, the channel’s
teletext information service can be
Being one of the most prominent services of
broadcasting today, Teletext renders using the
TV more fruitful.
viewed while the channel’s regular
TEXT/
MIX
broadcast is carried on. To return to the
Teletext broadcast, press the key ( ),
to return to the TV broadcast, pres the
key ( ).
Teletexts means in short the transmission of
various updated information along with the TV
broadcast in the form of texts and graphics.
To be able to receive a quality teletext broadcast,
a good antenna system and a broadcast that is
not weak, with no reflections and interference
from other channels are required. Even in a very
clear reception, it is normal for some characters
or tabs to be lost. Such conditions will
automatically be improved in a short time under
normal circumstances.
Page enlargement button (DOUBLE)
Using this button, you can watch the top
half of the teletext page in the enlarged
format. To be able to view the bottom
half of the page as enlarged, press again
the same button. Once you press the ( ) button
for the third time, the page will be restored to its
normal size.
Accession to the Teletext mode
Stop Button (HOLD)
In a channel that does not have the
Some information is laid out by the
broadcasting agency in multiple pages
and it is broadcast in the automatic cycle
mode. For example, on a text of four
pages, the pages are indicated
Teletext feature, if you are to press the
TEXT/
MIX
(
)
button, the message “NO
TELETEXT UNAVAILABLE” will appear
on the screen.
-16-
with the figures 01, 02,03 and 04 on the bottom
of the page. To view one of these pages longer,
press the ( ) button. When you press the same
button again, the cycle continues.
Note: The fastext feature is not available for all
the teletexts broadcasts. It is determined by the
broadcasting agency whether it is to be broadcast
or not.
Sub page button (SUB)
If any agency that performs teletext
broadcasting broadcasts the sub pages
of any teletext page, the page numbers
starting with 01 appear on the bottom
of the screen. Using the ( ) button, you
can switch to the sub pages. In that
case, the tab 'sub page’ is visualized
External equipment
connection:
You can connect to your television many compatible
sound and picture devices.
5
AV inputs: Press the ( ) button on the RC. The
Source menu will be visualized on the screen in
which the access mode can be selected. Here,
you can select whichever input you would like.
inside "red -" and "green +" frames. You can
select the sub pages pressing the "RED" and
"GREEN" buttons. You can abort the same page
by pressing again the same button.
TV: While in the AV modes, move onto this option
and press the ( ) button for switching to the TV
mode.
UPDATE Button
This button is designed so that you do
not wait for searching the page and
AV1: To watch the picture of the broadcast device
connected to the Scart1, move onto this option
switch to the television picture while
looking for your desired page in the
teletext broadcast. You may switch to the
television picture by pressing the ( ) button
while Teletext is looking for your desired page.
Once the page you would like has been found,
the number of that page appears on the screen.
and press the button ( ). (You can watch via
this Scart if there is a RGB output from the device
with which you made a connection).
AV2: To watch the picture of the broadcast device
connected to the Scart2, move onto this option
and press the button ( ). (You can watch via
this Scart if there is a RGB output from the device
with which you made a connection).
Question - answer button (REVEAL)
Sometimes, a teletext page contains a
?
hidden answer such as a game or a
S-VHS: To watch the picture of the broadcast
device connected using the S-Video input, move
onto this option and press the button ( ).
riddle. To disclose the hidden answer,
press the button ( ).
Clock
AV3: To watch the picture of the broadcast device
connected using the RCA (Cinch) input, move
onto this option and press the button ( ).
The Clock function of the ( ) button;
when you would like to find out the time
while watching any television channels,
pres the button ( ). In that case, a clock
will appear on the up right corner of the screen.
You can erase the time information off the screen
by pressing the same button.
PC: To be able to watch the monitor image in
the PC mode, move onto this option and press
the ( ) button.
HDMI: To be able to watch the image when a
connection is made via the HDMI socket, this
option must be selected.
Fastext
The colored buttons on the remote control device
are for the fastext feature.
YPBPBR (Component Input): To be able to
watch the image when a connection is made via
the this socket, this option must be selected.
When you select any page, the titles on various
subjects might be visualized on the screen in
four different colors or inside colored frames
(red, green, yellow and blue).
By pressing the button pertaining to the relevant
color on the remote control, you can access the
subject of your choice without waiting.
-17-
Headphones
High definition - HD ready
Your television can receive high-
The headphones must have an impedance
of between 8 and 32 ohms and have a 3.5
mm stereo jack plug. Plug the headphone
jack into the headphone socket of the TV.
definition signals (HDTV) You can
connect the input sources (HDTV
set-top box or HDTV DVD player)
to the (HDMI) socket (digital HDTV signal).
This ensures that you can view digital HDTV
programmes, even if they are copy-protected
(HDCP High-Definition Copy Protection).
SCART SOCKET
External equipment connection:
VCR/VCD
In order to be able to connect an external
device, your TV is equipped with 7 inputs
including antenna input as follows:
DVD/PVR
1-Antenna input
2-VGA input
3-HDMI input
4-YUV component input
5-S-VHS input
6-SCART input
7-RCA input
DECODER
You can connect your external device
supporting the suitable inputs to your TV via
these inputs.
CAMCORDER
By pressing the ( ) button on your
AV
remote control, select the input AV1,
AV2 to which you connected your
device.
VIDEO GAME
INPUT
Your LCD television can also be used as a PC
monitor since it also enables VGA inputs at the
same time.
PC Connection:
Connect the D-Sub15 connector to the PC-IN
input behind your television using a suitable
cable (not supplied with your television).
Using again a suitable cable, you can also listen
to the sound from your PC by connecting the
sound output of your PC to the PC AUDIO-IN
input behind your television.
R
L
VIDEO
Transition to the PC mode
For your LCD-TV to pass to the monitor (PC)
mode, press the ( ) on your remote control.
To switch back from the PC mode to the TV
mode, use the ( ) button on your remote control.
-18-
Switching to the HDMI mode
PC Accession Setting
Connect it to the HDMI input behind your TV
using connector located on your PC or your
digital video-transmission device and a suitable
cable (not supplied with the TV).
In the PC mode, enter the picture setting menu
by pressing either the ( ) or Green ( ) button.
In order to make the necessary adjustments in
this menu, you can use the Right-left, Up-down
Note1: To be able to watch an image in the
HDMI mode, it is necessary that your computer
be equipped with a HDMI supported screen card.
direction ( )/( ) ( )/( ) buttons on your remote
control.
Here, you can not only make the brightness and
contrast settings, you can also make the following
settings related to the monitor.
You may see on the screen the resolution
information by pressing the “ ” button.
If a DVD source is connected to the HDMI input
via an appropriate cable connector, the sound
in the PC AUDIO IN is emitted out of the
loudspeaker.
X. Position: Horizontal position setting
Y. Position: Vertical position setting
Clock Frequency: This is the pixel clock
frequency. User can norrow down or enlarge the
display by selecting a desired value.
Note2: To connect a RGB-supported external
device to your television, it is necessary that you
use a RGB supported Scart cable. If your external
device is supported in that case, you can set the
output as RGB.
Phase: Using the right/left direction ( )/(
)
keys, you can ensure that the colors and shapes
are exactly consolidated on the PC image.
Note3: It is necessary that the decoder device
be equipped with a tuner so that you can connect
a decoder through a RCA connection.
Picture Format: You can select the PC image
in the 16:9, 4:3, Subtitle, Letterbox, Panorama
or Automatic formats.
HDCP support: Your set supports HDCP feature.
To use this feature, you must set up a connection
to your TV set’s HDMI video port and select
HDMI by pressing the AV key on your remote.
You can perform the same process via the format
selection button found on your remote control
without entering the picture menu.
Automatic configuration: The most
suitable geometric settings in accordance with
the entry mode are configured by this function.
For this application, simply select the Automatic
Position tab and press the ( ) button.
You can make the ZOOM and PIP processes in
the PC mode as described in the above parts.You
can adjust the sound of the source you have
connected to the Audio-In input behind yout TV
using the buttons ( )/( ), you can make it ( ).
Connecting a Video recorder device and a digital satellite receiver
ANT IN
Scart 1 TV IN/OUT
Scart 2 AUXIN
Scart Socket
ANT OUT
Antenna
socket
DIGITAL SATALLITE RECEIVER
VIDEO RECORDER
BEHIND THE TELEVISION
-19-
Help and tips
The television does not function
Make sure that the power cable of the television
is connected to the network and the power on
-off switch is turned on.
No sound
•
Temporary sound mute might be on. Try
pressing the mute button.
Is the sound turned down?
A headphone might have been connected
to the television.
•
•
Low picture quality
•
•
Is the antenna cable connected?
If you are using a satellite antenna, has the
antenna been adjusted to receive broadcast
in the best way?
The remote control does not function
•
•
Try replacing the batteries.
Be careful that there are no obstructions
between the remote control and television.
•
•
Be careful that the antenna is far from devices
that emit electromagnetic waves. (Neon
lights, loudspeakers etc.)
Try changing the direction of the external
antenna. High buildings and mountains might
lead to the appearance of a faded picture or
a double picture.
If your device does not work despite all of
these
If your television does not work properly even
though you tried the above mentioned solutions,
try turning it on and off again.
If you cannot start your television even though
you have applied all the written methods, refer
to the dealer or authorized service from where
you purchased the product.
Never attempt to repair yourself a non-operating
device.
•
•
The picture quality might be affected when
two external devices are connected. Try
disconnecting one of the devices.
Try making a fine tuning.
No picture
•
•
•
Is the antenna connected correctly?
Is there any damage on the antenna cable?
Are the plugs on the antenna cable
connected correctly?
•
Are you sure that you have pressed the
correct key on the remote control?
Symptoms
No picture and sound
No sound, picture available
No picture, sound available
Low quality picture
Foggy picture
Double picture
Line on the picture
Distorted picture
Distorted broadcast on some channels
Horizontal lines exist
Vertical fluttering in the picture
Weak color
No color
The remote control does not function
TV does not respond to the commands
Fluttering in the teletext
-20-
Technical specifications chart
SCREEN SIZE
Panel type
32”
32”, 16:9 Active
matrix TFT
Sound output
2x7 W Min.
Power
145 W
1,5 W
consumption
Stand-by power
consumption
Teletext page
12
General technical specifications
Power supply
AC:............................................................................230V 50 Hz
Program memory: ..................................................100
RF Antenna input: ..................................................75 Ohm (Co-axial)
Loudspeaker impedance: .....................................8 Ohm
Sound systems: ......................................................Mono/Stereo/Nicam
Batteries...................................................................2xUM - 4, IEC R03 or AAA 1.5V
Received channels: ................................................VHF (Band I channel 2-4)
..................................................................................VHF (Band III channel 5-12)
..................................................................................UHF (Channel 21-69)
..................................................................................Cable TV (S1-S20/S21-S41)
Received broadcasting systems................................PAL BG
PAL SECAM BG
PAL SECAM BG DK/DK’
PAL SECAM BG LL’
PAL I
Note: Your television has been manufactured in accordance with your country by selecting from
among the above mentioned broadcasting systems and this system cannot be changed by the user
except the case described below: In countries where BG/DK and BG/LL’ broadcasts are done (BG
or DK / BG and LL’). For further information, see the settings part about your television.
Environmental note
This product has been made from high-quality parts and materials which can be re-used and recycled.
Therefore, do not throw the product away with normal household waste at the end of its life. Take it
to a collection point for devices. This is indicated by this symbol on the product, in the operating
manual and on the packaging.
Please find out about collection points operated by your local authority.
Help protect the environment by recycling used products.
Note: This is a Class A product. During operation the device can cause radio interference. In this case
the user may have to remedy this. Please contact your specialist dealer.
-21-
ATW.801
|