UltraWAVE
GSM Network-In-A-Box
ADC's GSM Network-In-A-Box (NIB) combines GSM MSC, Base Station Controller and Base
Transceiver Station in a single box. It provides the smallest and lowest entry point into the
GSM wireless space. ADC's MSC, BSC and BTS work hand-in-hand to reduce the total cost of
network ownership, providing a network growth path for existing and future customers. ADC's
GSM products provide a compact and cost-effective platform, which help lower the cost of
network ownership.
Features
• Compact integrated MSC, BSC and BTS
• Call forwarding (conditional, unconditional), call waiting, call hold, call transfer
• Generates GSM & ASN.1 compliant CDR records
• Available in 850, 900, 1800 and 1900 MHz frequency bands
• General Packet Radio Service (GPRS) support
• MAP-C, MAP-D
• Dynamic power control (uplink and downlink)
• Built in IN Prepaid, SMSC, AuC and EIR
• External alarms for third party equipment are also supported
• Common hardware modules with UltraWAVE X100, BTS and BS Plus products
• Integrated full rack solution available: UltraWAVE NIB integrated with additional on-site
equipment such as transmission, battery backup, etc. in one rack
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
UltraWAVE
GSM Network-In-A-Box
FEATURES
Interface Capacity:
Busy Hour Call Attempts:
Total Subscribers:
90 Erlangs @ 0.1% Grade of Service
3600
3600 @ 0.025 Erlang per subscriber
Max Number of Full Rate
Simultaneous connections:
Up to 106 (non-blocking)
RADIO
Number of TRXs:
Number of BTSs:
Output Power:
2 internal, 26 total
1 internal; 5 total
Variable up to 50 Watts at antenna port
-111 dBm (without diversity)
-114 dBm (with diversity)
RF Receiver Sensitivity:
KEY FEATURES:
Integrated IN Prepaid, SMSC
Integrated TRAU function
Star or daisy chain configuration
Optional audio announcements and voicemail
Encryption (A5/0, A5/1)
Sectorization supported
GPRS supported (CS-1, CS-2, CS-3, CS-4)
INTERFACES
PSTN:
ITU/ANSI ISUP, ITU/ANSI ISDN PRI, R2
MSC/BSC Link:
GSM Compliant A Interface;
GSM Spec. 04.08, 08.08; ANSI 1992 CCITT 1988, 1992; BSSMAP,
GSM 08.08 DTAP, GSM 04.07, 04.08,SCCP & MTP GSM spec 08.06
GSM Compliant Um Interface; GSM Spec. 04.06, 04.08, 05.01-
05.05, 05.08 & 05.10; GSM spec 03.64, 04.60 (Rel 98)
Abis Interface, GSM spec. 04.08, 08.58, 12.21
G7.03 compliant E1 75/120 Ohm;
RF Interface:
BTS Link :
Transmission:
T1.403 compliant T1 100 Ohm
Ethernet:
10/100 Mbps Ethernet, RJ-45 connector
Serial Port:
RS232, RJ-45 connector
OPERATION
Remote Monitoring:
Access to Equipment:
Field Support:
Monitor temperature, PA, fan, PSU, external alarms supported
Front loaded cards and modules
Modules are field replaceable
POWER SUPPLY
Input Voltage:
Redundancy:
Alarm:
115/230 VAC; -48 VDC
Redundant power supply
PSU failure alarm reported OMC
MECHANICAL
Dimensions (HxWxD):
Weight:
535 x 485 x 410 mm (21 x 19 x 16 inches)
57 kg (125 lbs) typical (meets 2 man-lift requirement)
OPERATING ENVIRONMENT
Temperature:
Humidity (non-condensing):
-5° to 45°C (23°F to 113°F)
10% to 90%
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
105968AE 6/08 Revision
©
2008 ADC Telecommunications, Inc. All Rights Reserved
|