UltraWAVE CDMA Pico BS Plus
CDMA Base Station Controller and Base Transceiver Station
UltraWAVE CDMA Pico BS Plus is a future proof, IP-based CDMA 2000 1XRTT solution that
provides indoor wireless telephony and always-on data access for mobile and residential users.
Its distinctive distributed IP architecture minimizes operators’ initial investment and expedites
time-to-market.
The UltraWAVE CDMA Pico BS Plus is a standards-compliant, cost-effective, CDMA2000 Base
Station Controller and Base Transceiver Station (BTS) utilizing IP connectivity to backhaul voice and
data traffic. It is particularly optimal for indoor applications. This flexible CDMA2000 Radio Access
Network (RAN) platform is ideal for providing voice and data services, as either an extension of an
existing network or as part of a standalone network using the UltraWAVE CDMA MSC platform.
The UltraWAVE CDMA Pico BS Plus can be attached to a collocated or centralized trunk gateway
while being managed by ADC’s or a third party MSC. It can also be deployed with a standalone
V5.2 access gateway.
Features:
• Built-in BSC Functions including Packet
• 1xRTT and IS-95
Control Function (PCF)
• Managed over MGCP or IOS
• Circuit voice, VoIP, high speed packet data
• Inter-BSC soft handoff
• Built-in Selection and Distribution Unit (SDU)
Functions
• EVRC/QCELP over IP
• Inter-BTS, Inter-BSC, Inter-Vendor Hard
• Local call termination
Handoff
• Support for supplementary services
• Omni, 1 FA or 2 FA
• Standard A1, A3/A7 interfaces over IP
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
|