ADTRAN Network Card FE1 User Manual

For more detailed documentation, visit us online at www.adtran.com.  
®
NetVanta E1/FE1 Network Interface Module (NIM)  
P/N 1200868L1  
Quick Start Guide  
INSTALLATION INSTRUCTIONS  
WAN-E1  
DBU  
1. Remove power from the unit.  
2. Slide the option moduleinto the option slot until the module is firmly  
seated against the chassis.  
3. Secure the pins at both edges of the module.  
4. Connect the cables to the associated device(s).  
5. Complete the installation of the base unit.  
6. Restore power to the unit.  
SPECIFICATIONS  
Operatin Modes  
Frame Relay, Multilink Frame Relay,  
PPP, Multilink PPP, HDLC  
E1/FE1 Interface  
Supported Standards: ITU-T G.703, ITU-T G.704  
(CRC-4), ITU-T G.823, ITU-T G.797  
Line Rate: 2.048 Mbps ±50 PPM  
FE1 Line Rate: Channelized timeslot (in multiples of  
56/64 kbps)  
NetVanta modules should be installed only in  
NetVanta Series products.  
Line Code: AMI or HDB3  
Framing: FAS with optional CRC-4  
Receiver Sensitivity: -30 dB  
Connector: RJ-48C  
WAN-E1 NETWORK (RJ-48C) CONNECTION PINOUTS  
Pin  
1
Name  
R1  
T1  
Description  
Clock Source  
Diagnostics  
Network, internal  
Receive data from the network - Ring 1  
Receive data from the network - Tip 1  
Unused  
Test Pattern Generation and Detection: QRSS, 511, all  
ones, all zeros  
Network loopbacks  
Alarm generation and detection  
Network performance data (15 minutes and 24 hours)  
2
3
4
R
Transmit data toward the network - Ring  
Transmit data toward the network - Tip  
Unused  
Compliance  
Physical  
FCC Part 15 Class A, EN 55022 Class A, EN 55024,  
EN 61000-3-2, EN 61000-3-3  
AS/ACIF S016, ETSI TBR 12/TBR 13  
EN 60950, IEC 60950, AS/NZS 60950  
5
T
6-8  
An optional Dial Backup Interface Module (DIM) is  
required for dial backup applications.  
Dimensions: 2.75-inch W x 4.25-inch D  
Operating Temperature: 0°C to 50°C  
For a description of the DBU pinouts, refer to the  
Quick Start Guide included with your DIM shipment.  
Storage Temperature: -20°C to 70°C  
Relative Humidity: Up to 95 percent, noncondensing  
Important: For additional details on product  
features, specifications, installation, and safety,  
refer to the appropriate Hardware Installation  
Guide on the ADTRAN OS System Documentation  
CD shipped with the base unit and available online  
Quick Start Guide, 61200868L1-13D, July 2005  
ADTRAN Technical Support +1-256-963-8716  
Copyright © 2005 ADTRAN, All Rights Reserved  
 

ADTRAN Power Supply 4303 PLUS User Manual
AEG Convection Oven BP5003021 User Manual
AeroGarden Greenhouse Kit 100633 DSS User Manual
Alesis Computer Monitor Monitor One User Manual
Altec Lansing Speaker im500 User Manual
American Standard Indoor Furnishings 0530004SG User Manual
Atlantic Indoor Furnishings 200 DVD User Manual
Audiovox Baby Monitor VE103IM User Manual
Axis Communications Security Camera M3025 VE User Manual
Axor Plumbing Product 42066000 User Manual