Installation Guide
Solecis AVB-DA-RGBHV-0102
AVB-DA-RGBHV-0102 Specifications (Cont.)
Overview
The Solecis AVB-DA-RGBHV-0102 1x2 RGBHV HD-15 Distribution Amplifier
(FG1340-1200-01) is a high bandwidth, high resolution 1x2 VGA through to
UXGA distribution amplifier. With a video bandwidth in excess of 350MHz the
AVB-DA-RGBHV-0102 is the ideal choice for all presentation applications.
Certifications:
• CE
• UL
• FCC class B, part 15
• RoHS/WEEE compliant
The AVB-DA-RGBHV-0102 incorporates buffered outputs to ensure signal
integrity when distributing data and video to projectors, monitors and plasma
displays.
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to
comply with these instructions could result in fire, electrical shock, personal injury,
death, or damage to the equipment.
The AVB-DA-RGBHV-0102 comes complete with an external 12V power supply.
Signal and picture quality can be further maintained over long distances by using
true high quality VGA cable.
Liquid Spills
Do not set drinks on top of the unit or immerse the unit in liquid.
(front)
Do Not Disassemble
This device contains no user serviceable parts. All servicing must be performed by a
qualified service technician.
For Safety Reasons
•
•
•
•
Do not place the unit on an unstable surface.
Do not use near water or sources of heat.
Use only recommended attachments.
Use the type of power supply as specified.
Unplug the power to the unit and refer servicing to qualified personnel under the
following conditions:
•
•
If liquid has been spilled or the unit has been exposed to rain or water.
If it does not operate normally when the operating instructions are followed or if it
exhibits a distinct change in performance indicating a need for service.
If the unit has been dropped or the cabinet damaged.
•
Video Pin Connections
FIG. 2 provides the pin layout for the HD-15 connectors:
Video IN
Power
connector
(rear)
Video OUT 1
Video OUT 2
FIG. 1 Solecis AVB-DA-RGBHV-0102
5
4
3
2
1
10
9
8
7
6
Product Specifications
15
14
13
12
11
AVB-DA-RGBHV-0102 Specifications
RGB Input
FIG. 2 RGBHV connector
The pin configuration for the HD-15 (video) connector are as follows:
Number:
1
Connector:
Level:
HD-15
Analog
1V p-p
75 ohm
1 - RED
9 - n/c
2 - GREEN
3 - BLUE
10 - SYNC GROUND
11 - n/c
Max Level:
Impedance:
Sync Input
Type:
4 - n/c
12 - n/c
5 - n/c
13 - H SYNC
14 - V SYNC
15 - n/c
6 - RED GROUND
7 - GREEN GROUND
8 - BLUE GROUND
Analogue or TTL
470 ohm
Impedance:
RGB Video Bandwidth:
RGB Return Loss:
Sync Processing:
RGB Output
Number:
400MHz -3dB
-45dB@10MHz, -27dB@100MHz
TTL restore
2
Connectors:
Level:
HD-15
Analog
Unity
75 ohm
Gain:
Impedance:
Sync Output
Level:
TTL
Impedance:
Power
75 ohm
Input Voltage:
Power Consumption:
Dimensions (HWD):
Weight:
9VDC
3W
1.18” x 5.90” x 2.12” (3.0cm x 15.0cm x 5.4cm)
0.62 lbs. (0.28kg)
