Table of Contents
Precautions...................................................................................................................... 1
Package contents............................................................................................................. 2
Installation instructions ................................................................................................. 2
Assembling the Monitor .............................................................................................. 2
Detaching the Monitor................................................................................................. 2
Adjusting the Viewing Angle ...................................................................................... 3
Connecting the Devices ............................................................................................... 3
Switching the Power.................................................................................................... 4
Adjusting display settings .............................................................................................. 4
External Controls......................................................................................................... 4
OSD options .................................................................................................................... 5
OSD Menu................................................................................................................... 5
Troubleshooting.............................................................................................................. 8
General specifications..................................................................................................... 9
Precautions
The monitor may be damaged if placed too near a source of heat. Be
aware of the location of radiators, cookers, open fires etc.
•
•
Do not cover the slots and openings on the back or top of the cabinet as
the monitor requires ventilation. The monitor should be located in a well-
ventilated room to prevent the possibility of overheating.
•
•
Do not allow sharp objects such as knives, pens, or pencils near the
screen. If such objects touch the screen, the LCD panel will be
permanently scratched.
When cleaning this monitor, disconnect it from the electric socket to
avoid any danger of electrocution. A soft, lint-free cloth should be used
to clean the outside of the monitor. A cloth very slightly moistened with
a mild detergent solution will clean stubborn stains. Keep liquids away
from the display screen, including sprays. Do not spray liquid directly - it
is best to lightly spray on to a cloth and wipe. If liquid gets inside the
monitor it can cause electrical shock and/or damage to the unit.
•
If you encounter a problem, please check the "Troubleshooting" section
first. If this does not resolve the problem do not attempt to repair the
monitor by yourself; opening or removing covers can lead to injury or
death through electrocution among other hazards. Please contact a
qualified engineer if you find the troubleshooting section does not help.
1
Important
First, find a clean, flat surface to place the monitor after removing it from the stand.
Place a clean dry cloth under the monitor to protect it further.
Pull the monitor slightly up and away from the stand.
Adjusting the Viewing Angle
The viewing angle of the monitor ranges from -5°~20°.
Connecting the Devices
Caution: Make sure that the computer and the monitor are both disconnected
from the power supply.
2
VGA
3
Audio
2
1
1
3
AC
Audio
AC
VGA
c
d
Power Code
Attach the monitor to the power cord which should then be
inserted into a properly grounded electric socket.
Connect the signal cable to the VGA output socket of the
graphics card on the computer. Then tighten the
thumbscrews on the connector.
VGA Cable
(Attached)
e
Audio cable
(Optional)
Connect the audio input socket of the LCD monitor and the
computer by means of the audio cable.
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make
sure the shape of the plug matches the shape of the socket it is inserted
into, and that none of the pins are bent or otherwise damaged.
3
Switching the Power
First, switch the power on to the monitor, then switch the power on to the computer.
When you see the LED on the power button go green, this indicates the computer is
ready for use. Allow about 10 seconds for the video signal to appear. If you do not see
the green light on the power button or a video signal, check the connections.
Adjusting display settings
1
2
4
5
3
AUTO
<
>
MENU
External Controls
If OSD is active, press to exit a selection in
OSD. If OSD is inactive, press and the monitor
will automatically optimize the position, focus
and clock of your display.
1.
AUTO
If OSD is active, press to select or adjust OSD
options. If OSD is inactive, press once, then
press the buttons marked < or > to adjust the
volume.X
2
MINUS
PLUS
<
>
If OSD is active, press to select or adjust OSD
options. If OSD is inactive, press once, then
press the buttons marked < or > to adjust the
volume.Y
3
Press to view OSD.
4
5
OSD Function
POWER
Press again to enter a selection in OSD.
Power on/off
Green: power on
Orange: in sleep mode
Notice: X & Y are only suitable for models with speakers.
4
OSD options
Please refer to "External Controls" on Page 4.
To adjust the OSD settings:
1. Press the MENU button to open the OSD menu. Press again to enter a selection
of 10 functions on OSD.
2. Use the buttons marked < or >, to highlight a control, then adjust the control to
the desired level.
3. When you have finished making all selections, press the AUTO button to exit
the OSD.
OSD Menu
Contrast:
This adjusts dark and light shades of color
relative to each other to achieve a
comfortable contrast.
Brightness:
This adjusts the brightness of the picture on
the screen.
Focus:
This removes any horizontal distortion and
makes the picture clear and sharp.
Clock:
If there are any vertical stripes seen on the
background of the screen this renders them
less noticeable by minimizing their size. It
also changes the size of the horizontal
screen.
5
H-Position:
This adjusts the horizontal.
V-Position:
This adjusts the vertical.
COLOR:
There are three ways of adjusting color:
Warm (Reddish white)
Cool (Bluish white)
User defined:
You can adjust the colors red, green and blue
to the intensity you desire.
LANGUAGE:
Select the OSD menu language from
English, German, Spanish, Simplified
Chinese, Traditional Chinese, French, Italian,
and Japanese.
OSD SETTING:
This changes the position of the OSD window
on the screen and staying time.
6
Auto Config:
System runs auto-configuration.
INFORMATION:
This shows brief information on the screen.
Reset:
Recall to default settings.
Exit:
Exit from OSD.
7
Troubleshooting
Problems
Possible Solutions
Power LED is not ON
•
Check to see if the power switch is in the
ON position.
•
•
Ensure that the Power Cord is connected.
No Picture
Check to see if the power switch is in the
ON position.
•
•
Ensure that the Power Cord is connected.
Ensure the video cable is securely
connected to the back of the monitor and
the computer.
•
•
Move the mouse or press any key on the
keyboard to bring the monitor out of "active
off" mode.
Picture shows inappropriate colors
See "Color Adjustment" to adjust RGB
color or to select color temperature.
Picture bounces or a wave pattern
is present in the picture
•
•
Move or switch off electrical devices that
may be causing interference.
Inspect the monitor's video cable and ensure
that none of the pins are bent.
Image is not sized or centered
properly
•
•
Press select/auto key and the monitor will
automatically optimize the position of your
display.
See "Position adjustment".
Caution: Do not attempt to service the monitor yourself or open the computer
yourself. Please refer all servicing to qualified service personnel if
the problems cannot be solved in "Troubleshooting" section.
8
General specifications
Item
Specification
LCD Panel
Display
Max resolution
Pixel Pitch
Color
17-inch Flat panel active-matrix TFT LCD
SXGA 1280×1024 pixels
0.264 mm
16.2M
Brightness
Contrast Ratio
300 cd/m² (Typical)
450:1 (Typical)
Response Time
View Angle of Horizontal
View Angle of Vertical
External Controls
Power Button
Control Buttons
OSD Function
Contrast /Brightness
Focus/Clock
Position
4ms +16ms /20ms (Tr+Tf / typical)
75° / 75°
65° / 60°
ON/ OFF
Auto, <, >, MENU
Contrast / Brightness
Focus/Clock
Position
Color
Color
Language
Language
OSD Setting
Auto config
Information
Reset
OSD setting
Auto config
Information
Reset
Exit
Exit
Video Interface
Video
Analog 0.7V
TTL (+/ -)
1W x 2
Sync
Audio (Optional)
Plug & Play
DDC2B
Power
Power Source
Power consumption during normal
operation
100~240V AC, 50/60 Hz
< 40W
Power consumption during active off
operation
< 1W
Dimension and Weight
Dimension (W×H×D)
377 × 396 × 182 mm (with stand)
377 × 396 × 62 mm (without stand)
4.3 Kg/ 5.4Kg
Weight (Net/ Gross)
9
10
|