Table of Contents
Preface ...............................................................................................................................1
Chapter 1 Installation........................................................................................................2
Unpacking ............................................................................................................................................. 2
Connecting the LCD Monitor and Base ................................................................................................ 2
Viewing Angle Adjustment................................................................................................................... 2
Detaching LCD Monitor from Its Stand................................................................................................ 3
Interface for Arm Applications.............................................................................................................. 3
Connecting the Display to your Computer ............................................................................................ 3
Connecting the AC Power..................................................................................................................... 3
Connecting the Audio Cable ................................................................................................................. 3
Connecting the AV and S-Video cable.................................................................................................. 3
Setting Up the LCD Monitor................................................................................................................. 4
Power Management System .................................................................................................................. 4
Chapter 2 Display Controls...............................................................................................4
User Controls ........................................................................................................................................ 4
Adjusting the Monitor's Display............................................................................................................ 5
Function Description............................................................................................................................. 5
Chapter 3 Technical Information ...............................................................7
Specifications ........................................................................................................................................ 7
Standard Timing Table........................................................................................................................ 10
Troubleshooting .................................................................................................................................. 10
Preface
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has
been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The
information in this document is subject to change without notice. This document contains proprietary information
protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior written permission of the manufacturer.
FCC Statement Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance could void your authority to operate
the equipment.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
1
Detaching LCD Monitor from Its Stand
Unscrew screws n the swivel base support column and pull it from main body.
Figure 1-3
Interface for Arm Applications
Before installing to mounting device, please refer to Fig.1-3.
The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded
nuts, as well as four 5 mm access holes in the plastic covering as illustrated in
Figure 1-4. These specifications meet the VESA Flat Panel Monitor Physical
Mounting Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13
November 1997).
Figure 1-4
Note :Please using Ø 4mm x 8mm (L) screw for this application
Connecting the Display to your Computer
1. Power off your computer.
2. Connect one end of the signal cable to the LCD Monitor’s VGA port or DVI
port.(See Fig 1-5)
3. Connect the other end of the signal cable to the VGA port or DVI port on
your PC.
4. Make sure connection are secure.
Figure 1-5
Attention: This device must be connected to an off-the-shelf video cable in order to comply with FCC
regulations. A ferrite-core interface cable is included in the LCD Monitor package.
This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is used.
Connecting the AC Power
1. Connect the power cord to the AC adapter.(See Fig. 1-6)
2. Connect the AC adapter’s DC output connector to the DC Power Jack of the
monitor.
3. Connect the power cord to an AC power source.
Figure 1-6
Warning:We recommand to install a “Surge Protector” device between the AC Adapter and the electrical wall outlet
for adding protection against power surges to prevent the errects of sudden voltage variations from reaching the LCD
Monitor. Sudden power surges may damage your monitor.
Connecting the Audio Cable
1. Connect the audio cable to the " LINE OUT " jack on your PC's audio
card or to the front panel's “AUDIO OUT” jack of your CD ROM drive.
(See Fig. 1-7)
2. Connect the other end of the audio cable to the LCD Monitor's " LINE
IN " jack.
Figure 1-7
Connecting the AV and S-Video cable
1. Connect the AV cable to RCA Jack and follow the color and the other
side connect to AV source.
2. Connect the S-Video cable from main body to AV source.
Figure 1-8
3
Setting Up the LCD Monitor
1.Make sure the AC power cord is connected to the LCD Monitor.
2.Turn on the LCD Monitor's power switch, located on the bezel of the monitor.
Power Management System
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS
provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will
light yellow.
Chapter 2 Display Controls
User Controls
A brief description and the location of all LCD Monitor function controls and indicators:
Figure 2-1
PC Audio Stereo output.
1. Press the soft power switch to switch the monitor ON/OFF.
2. LED lights Blue color --- Power is ON.
3. LED lights Yellow --- Monitor is in "Power Saving Mode".
4. LED is off --- Power is OFF.
Stereo Speakers
1
2
Soft Power Switch
(DC Power-On Indicator)
1. Press the Auto Buttons Monitor will Auto-Adjusting.
2. Press the Auto Buttons over 2 second the Monitor Searching next
source.
1. Direct press either left or right control button can adjusting
speaker Volume control.
2. When press after Menu buttons then Press either left or right
control button for OSD first menu (left side) function selection.
3. When selection you want adjusting function then press Menu
buttons again for OSD second menu (right side) function
selection. You can Press the left button to decrease the OSD
setting and press the right button to increase the OSD setting.
1. Press the Menu will show OSD (On Screen Display) Function
Menus table.
Auto
3
4
Function Select and
Adjustment Control
Buttons
Menu
5
2. When OSD (On Screen Display) Menus display press Menu
Buttons will enable selection function.
4
Adjusting the Monitor's Display
The monitor has four function control buttons to select among functions shown on OSD menu,
designed for easy user-viewing environments.
OSD Function Menu
To access OSD Main menu, simply press one of the
Function Select control buttons, and the menu diagram will
pop up on the screen as shown on Fig. 2-2:
Continue pressing the Function Select buttons to scroll
through the entire menu items ,then press Adjustment
Control buttons to adjust content of selected item.
Figure 2-2
Function Description
Analog RGB / Digital RGB
Picture
Press > button, auto adjust the display mode to its utmost performance
according to VGA setting.
Auto adjust
Brightness
Contrast
H-position
V-position
Phase
Adjust the overall image and background screen brightness.
Adjust the image brightness in relation to the background.
To move the picture image horizontally left or right.
To move the picture image vertically up or down.
To improve focus clarity an image stability.
Clock
Exit
To increase or decrease the horizontal size of image.
To exit the main menu.
Advanced
Sharpness
Color
Adjusts the picture sharpness.
You have 4 kinds of options.
This control adjusts the color temperature of the screen image, this item are
preset by factory, you can not adjust these setting, The performance is bluer
and brighter.
Cool
Natural
Warm
This performance is reddish and closer to paper white.
This performance is yellowish and closer to paper white.
You can adjust the individual color intensity by yourself. Increase or
decrease red, green or blue depending upon which is selected
User
User red Increase or decrease red.
User green Increase or decrease green.
User blue Increase or decrease blue.
Exit
To exit the main menu.
Audio
Volume
Base
This features adjusts < to decrease volume and > to increase volume.
This features adjusts < to decrease base and > to increase base.
This features adjusts < to decrease treble and > to increase treble.
Treble
This features adjusts < to decrease left speaker volume and > to increase
left speaker volume.
This features adjusts < to decrease right speaker volume and > to increase
right speaker volume.
ATTL
ATTR
Loudness
Mute
This features choose on or off to get loudness.
This features choose on or off to mute the sound.
5
Exit
To exit the main menu.
Options
OSD
To move the OSD image.
OSD H-position To move the OSD image horizontally left or right.
OSD V-position To move the OSD image vertically up or down.
Language
Exit
You can choose one of the nine languages you need.
To exit the main menu.
Utilities
You can select how long the monitor waits after the last adjust of the key to
shut off the OSD menu. The time setting choices are from 5 to 60 seconds.
OSD timeout
OSD background You can select opaque or translucent to change OSD background.
Source icon You can select on or off to display OSD icon.
Exit
To exit the main menu.
Reset
Exit
Reset the currently highlight control to the factory setting. User must be
using factory preset video mode to use this function.
Memory recall
Exit
To exit the menu.
To exit the OSD menu.
Composite Video / S-Video
Picture
Brightness
Contrast
Saturation
Hue
Adjust the overall image and background screen brightness.
Adjust the image brightness in relation to the background.
Adjusts the color saturation of the screen image.
Adjusts the color hue of the screen image.
Adjusts the picture sharpness.
Sharpness
Scaling
Exit
Adjusts the picture size full screen or 16:9 screen.
To exit the main menu.
Advanced
Sharpness
Color
Adjusts the picture sharpness.
You have 4 kinds of options.
This control adjusts the color temperature of the screen image, this item are
preset by factory, you can not adjust these setting, The performance is bluer
and brighter.
Cool
Natural
Warm
This performance is reddish and closer to paper white.
This performance is yellowish and closer to paper white.
You can adjust the individual color intensity by yourself. Increase or
decrease red, green or blue depending upon which is selected
User
User red Increase or decrease red.
User green Increase or decrease green.
User blue Increase or decrease blue.
Exit
To exit the main menu.
Audio
Volume
Base
This features adjusts < to decrease volume and > to increase volume.
This features adjusts < to decrease base and > to increase base.
This features adjusts < to decrease treble and > to increase treble.
Treble
6
This features adjusts < to decrease left speaker volume and > to increase
left speaker volume.
This features adjusts < to decrease right speaker volume and > to increase
right speaker volume.
ATTL
ATTR
Loudness
Mute
This features choose on or off to get loudness.
This features choose on or off to mute the sound.
To exit the main menu.
Exit
Options
OSD
To move the OSD image.
OSD H-position To move the OSD image horizontally left or right.
OSD V-position To move the OSD image vertically up or down.
Language
Exit
You can choose one of the nine languages you need.
To exit the main menu.
Utilities
You can select how long the monitor waits after the last adjust of the key to
shut off the OSD menu. The time setting choices are from 5 to 60 seconds.
OSD timeout
OSD
background
You can select opaque or translucent to change OSD background.
Source icon You can select on or off to display OSD icon.
Exit
To exit the main menu.
Reset
Reset the currently highlight control to the factory setting. User must be
using factory preset video mode to use this function.
Memory recall
Exit
To exit the menu.
To exit the OSD menu.
Exit
Chapter 3 Technical Information
Specifications
LCD Panel
Size
17" (43 cm)
Display Type
Resolution
Active matrix color TFT LCD
1280 x 1024
Display Dot
Display Area (mm)
Display Color
Brightness
Contrast Ratio
Response Time
Lamp Voltage
Lamp Current
Viewing Angle
1280 x (RGB) x 1024
337.92 x 270.336 (H x V)
16.7M
250 cd/m2 (typical)
430:1 (typical)
Tr=5ms Tf=15ms (Ta=25°C)
700 Vrms (typical)
6.5 mA rms. (typical)
Vertical: -65° ~ +65°
Horizontal: -80° ~ +80°
7
Video
Input Signal
Input Impedance
Polarity
Analog RGB 0.7Vpp
75 Ohm ± 2%
Positive, Negative
Digital TMDS
Amplitude
0 - 0.7 ± 0.05 Vpp
TMDS
Multi-mode Supported
Horizontal Frequency: 30 ~ 80 KHz
Vertical Frequency: 56 ~ 75 Hz
30~64KHz
56~75 Hz
Audio
Input Signal
Audio Power Output
Speaker
500mVrms
1Wrms + 1Wrms Max
2W 8Ω x 2
Composite Signal and S-Video Signal Support
Input Signal
Composite Video (NTSC/PAL)
S-Video Y/C (NTSC/PAL)
Input Impedance
Amplitude
75 Ohm ± 2%
0 - 0.7 ± 0.05 Vpp
Control
Power switch (hard and soft types)
On/Off switch with LED indicator
OSD
Brightness
Contrast
Horizontal Position
Vertical Position
Phase
Digital
Digital
Digital
Digital
Digital
Digital
Clock
Display Mode Setup
OSD Format
Use EEPROM to save settings in memory
20 characters x 9 rows
Power Management
Mode
On
Off
Power Consumption*
AC Input
LED Color
55W maximum
5W maximum
5W maximum
240 VAC
240 VAC
240 VAC
Green
Yellow
Dark
Soft switch off
Yellow: Standby, Suspend, Off
Disconnected
5W maximum
240 VAC
Dark: DC Power off
* Meeting VESA DPMS requirements measured from AC Input end of AC adapter.
Sync Input
Separate TTL compatible horizontal and vertical synchronization
Digital TMDS
Signal
Polarity
Positive and negative
Supports VESA DDC1 and DDC2B functions
Plug & Play
External Connection
Power Input (DC input)
VGA Cable
+12VDC / 5A min. input through AC/DC adapter
1.8M with 15-pin D-sub connector, 1.8M with 24-pin DVI-D
1.8M with Stereo Jack
Audio Cable
Audio Video Cable
S-Video Cable
1.8M with Audio Video Jack (Red + White + Yellow)
1.8M with S-Video Jack
Environment
Temperature
Relative Humidity
Temperature
5°C to 40°C/41°F to 104°F
20% to 80%
-20°C to 60° C/-4°F to140° F
5% to 85%
Operating Condition:
Storage Condition:
Relative Humidity
8
Power Supply (AC Input)
Input Voltage
Input Current
Single phase, 100 ~ 240VAC, 50 / 60 Hz
1.5 A maximum
Size and Weight
Dimensions
Net Weight
Gross Weight
381 (W) x 400 (H) x 147 (D) mm
5.4 ± 0.3 kg
8.0 ± 0.3 kg
Pin Assignment
6
Signal
Signal
PIN
Description
PIN
Description
PIN
Description
11
1
5
1
2
3
4
5
Red
Green
Blue
Digital GND
Digital GND
6
7
8
9
10
Red Rtn
11
12
13
14
15
NC
SDA
H. Sync.
V. Sync.
SCL
Green Rtn
Blue Rtn
+5V
15
10
Hot Plug Detect
For Digital DVI-D connector
Signal13
Signal
Signal
Description
PIN
1
Descrip14tion
RX2-15
PIN
10
Description
RX1+
PIN
19
Shield for TMDS Channel 0
2
RX2+
11 Shield for TMDS Channel 1 20
NC
3
Shield for TMDS Channel 2 12
NC
NC
21
22
23
24
C5
C6
NC
Shield for TMDS Channel clock
4
NC
NC
13
14
15
16
17
5
+5V
RXC+
RXC-
GND
GND
6
SCL
SDA
NC
Hot Plug Detect
HPD
7
8
RX0-
9
RX1-
18
RX0+
Composite Video: Monitor rear side RCA female (Yellow).
Yellow for Video White and Red for Audio
AV-input
S-Video (Y/C): Monitor rear side 4 Pin Mini-DIN female.
S-Video
9
Standard Timing Table
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available
timing.
H. Freq.
(KHz)
31.469
37.861
37.500
31.469
37.879
48.077
46.875
48.363
56.476
60.023
63.981
79.976
V. Freq.
(Hz)
Pixel Freq.
(MHz)
25.175
31.500
31.500
28.322
40.000
50.000
49.500
65.000
75.000
78.750
108
H/V Sync.
Polarity
-/-
Resolution
Mode
VGA-480
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
59.940
72.809
75.000
70.087
60.317
72.188
75.000
60.004
70.069
75.029
60.020
75.025
-/-
VESA - 480 - 72Hz
VESA - 480 - 75Hz
VESA-400-TEXT
VESA-600-60 Hz
VESA-600-72 Hz
VESA-600-75 Hz
XGA
-/-
-/+
+/+
+/+
+/+
-/-
-/-
VESA-768-70 Hz
VESA-768-75 Hz
SXGA
+/+
+/+
135
+/+
SXGA
Note: When the in put display mode is not 1280 x 1024, the image is smoothly expanded to 1280 x 1024 dots with
the PW131 scaling engine. After expansion from 640x480, 720x400, 800x600, and 1024x768 resolution, the
text may look not so sharp, and the Graphics may look not so proportional.
Troubleshooting
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among
various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new
display mode or new VGA card is selected.
Attention
This LCD Monitor Supports Multiple VGA Modes.
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
PROBLEM Picture is unclear and unstable
The picture is unclear and unstable, please perform the following steps :
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the
“Clock” function in OSD menu and adjust (by increment or decrement numbers) until those bars
disappear.
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.
PROBLEM There is no picture on LCD Monitor
If there’s no picture on the LCD Monitor, please perform the following steps:
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is
running on the correct timing. Refer to Chapter 3 for information on timing.
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment
Control button several times.
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions
properly with a CRT Monitor but it does not function with the LCD Monitor, the output timing of the
VGA card may be out of the LCD’s synchronous range. Please change to an alternative mode listed in
the Standard Timing Table or replace the VGA card, and then repeat steps 1 and 2.
PROBLEM There is no picture on LCD Monitor
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 30
~ 80 KHz and Vertical: 56 ~ 75 Hz), the OSD will display a “Out of Range” message. Choose a mode that
is supported by your LCD Monitor.
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a
message “No Input Signal”.
10
|