T E C H N O L O G I E S
User Guide
Pocket eSATA/USB DigiDrive
(AEPDDESU, AEPDDESUWP, AEPDDESUWP-X)
v7.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
II.
Setting up the device in USB Mode
a. Attach mini USB cable from eSATA / USB
DigiDrive to USB port on PC.
b. The drive icon appears only when flash media is
inside the eSATA / USB DigiDrive.The drive icon
will disappear and reappear during media change.
Note for AEPDDESUWP: If an unformatted flash
media is use, no drive icon will show up in My
Computer.
Note for AEPDDESUWP-X: If an unformatted flash
media is use, no drive icon will show up in My
Computer.
Media Priority
When more than one media is inside the eSATA / USB
DigiDrive during bootup, the media that gets detected
first is according to the priority shown below
1. Compact Flash
2. Smart Media / xD Picture card
3. MMC / SD
4. Memory Stick
Note: If both eSATA and USB cables are plug-
in, the eSATA connection takes priority.
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
CONTACT US
Phone:
Fax:
408-573-8580
408-573-8588
Email:
|