MODEL/MODELO 2EKZ7/9046
OPERATING INSTRUCTIONS & PARTS MANUAL
9
WALL MOUNTED
8
OSCILLATING FAN
11
16" (40,6 cm) MODEL 2EKZ7/9046
4
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DE-
SCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY
WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
10
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING:USEOFATHREE-PRONGTOTWO-PRONGADAPTER
DESCRIPTION
7
IS NOT RECOMMENDED. IMPROPER CONNECTION MAY CRE-
ATE THE RISK OF ELECTRIC SHOCK. USE OF SUCH ADAPTERS
IS NOT PERMITTED IN CANADA.
The Air King 16” (40,6 cm) Remote Controlled - Wall Mounted
Oscillating Fan features manual push button and remote control
operation and also features a Timer function. It has a permanently
lubricated motor and a 6' (1.82 m) 18/3 cord set. It also features
an integrated safety plug.
WARNING: THIS PLUG IS A SAFETY FEATURE. TO REDUCE
THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INjURY,
DO NOT REMOVE, REPLACE, REPAIR OR TAMPER WITH
THE ORIGINALLY SUPPLIED PLUG. IF THE FAN DOES NOT
FUNCTION PROPERLY, IT MAY bE DUE TO THE SAFETY DEVICE
INCORPORATED IN THIS PLUG.
6
2
3
5
SPECIFICATIONS
Motor .................................120V, 60 Hz
Blade diameter ...................16" (40,6 cm)
Speeds.................................3
1
12
8. Where possible, avoid the use of extension cords. If they must
be used, minimize the risk of overheating by ensuring that they
are UL listed. Never use a single extension cord to operate more
than one Fan.
9. Do not operate any Fan with a damaged cord or plug or after the
Fan malfunctions, has been dropped or damaged in any manner.
Return Fan to authorized service facility for examination,
electrical or mechanical adjustment or repair.
Control ...............................Push Button/Remote Control
Air flow distribution ...........45°
Approvals...........................ETL Listed. Close mesh Fan Guard
meets OSHA requirements.
MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SER-
VICING THE FAN.
WARNING: DO NOT IMMERSE FAN IN WATER!
CLEANING: Use a soft cloth moistened with a mild soap solution,
suchasliquiddishwashingdetergent.DryALLPARTSCOMPLETELY
before reassembling. After any maintenance or servicing, COM-
PLETELY REASSEMBLE unit as described in this instruction manual
before reconnecting to the power supply.
CAUTION:Donotusegasoline,benzine,thinner,harshcleaners,etc.as
they will damage the Fan. NEVER use ALCOHOL OR SOLVENTS.
LUBRICATION: Precision bearings are sealed at the factory for life
and will not require any further lubrication.
STORAGE: Store the Fan, with these instructions, in a cool, dry
place.
Key Description
Part No.
9046001
9046002
9046003
9046004
9046012
9046011
9046006
9046007
9046010
9046009
9046008B
9046005
Qty.
1
2
3
4
5
6
7
8
9
Front Grill w/Ornament
Spinner
Fan Blade
Guard Nut
Ring Screw
Grill Ring
Rear Grill
Motor Assembly
Wall Mount Plate Safety Screw
1
1
1
1
1
1
1
1
1
3
1
1
MODEL
SPEED
2EKZ7/9046
MED
HIGH
1480
0.70
1275
0.40
50
LOW
1140
0.54
1040
0.32
37
10.Do not insert or allow fingers or foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock
or fire, or damage the Fan. Do not block or tamper with the Fan
in any manner while it is in operation.
CFM
M3/s
1340
0.63
1180
0.36
43
RPM
Amps
Watts
dBA
11.This Fan is not intended for use in wet or damp locations. Never
locate a Fan where it may fall into a bathtub or other water
container.
12.Do not use Fan outdoors.
44
39
34
13.This Fan is not suitable for use in agricultural facilities including
areas where livestock, poultry or other animals are confined.
Please refer to National Electric Code (NEC) Article 547-7
(2008), or applicable state or local codes or standards relating
to electrical requirements for Agricultural Buildings. THIS FAN
DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE
547-7 (2008).
14.This Fan is not suitable for use in hazardous locations. Please
refer to National Electric Code (NEC) Article 500 or applicable
state or local codes or standards relating to electrical
requirements for Hazardous locations. THIS FAN DOES NOT
MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).
10 Wall Mounting Plate Screws
11 Wall Mounting Plate
12 Remote Control
*
Tested in accordance with AMCA standard 230-99
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock
and injury to person, including the following:
1. Read all instructions before using Fan.
MANTENIMIENTO
2. Make certain that the power source conforms to the electrical
requirements of the Fan.
3. Use this Fan only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electrical
shock, or injury to persons.
4. Unplug power cord before installing, servicing, or moving the Fan.
WARNING: DO NOT DEPEND UPON THE ON-OFF SWITCH
AS THE SOLE MEANS OF DISCONNECTING POWER WHEN
INSTALLING OR SERVICING THE FAN. ALWAYS UNPLUG THE
POWER CORD.
5. This Fan must NOT be used in potentially dangerous
locations such as flammable, explosive, chemical-laden
or wet atmospheres.
6. DO NOT use Fan in or near a window. Rain may create an
electrical hazard.
7. The power cord is equipped with a three-prong grounded
plug that must be inserted into a matching receptacle. Under
no circumstances should the grounding prong be cut off the
plug. Where a two-prong wall receptacle is encountered, it
must be replaced with a properly grounded three-prong re-
ceptacle installed in accordance with the National Electrical
Code (NEC) and all applicable local codes and ordinances.
This work must be done only by a qualified electrician, using
copper wire only.
ADVERTENCIA: SIEMPRE DESENCHUFE EL CABLE ANTES DE MOVER
O DAR SERVICIO AL VENTILADOR.
Llave Descripción
No. De Parte Qty.
1
2
3
4
5
6
7
8
9
Rejilla delantera con adorno
Eje de pivote
Aspa del ventilador
Tuerca de protección
Tornillo de anillo
Anillo de rejilla
Rejilla trasera
Conjunto del motor
Tornillo de seguridad para
placa de montaje de pared
9046001
9046002
9046003
9046004
9046012
9046011
9046006
9046007
1
1
1
1
1
1
1
1
ADVERTENCIA: ¡NO SUMERJA EL VENTILADOR EN AGUA!
LIMPIEZA: Utilice un paño suave humedecido con una solución jabonosa
liviana, tal como un detergente líquido para lavar platos. Seque TODAS
LAS PARTES POR COMPLETO antes de rearmar. Después de dar
mantenimientooservicio,REARMEPORCOMPLETOlaunidadenlaforma
descrita en este manual de instrucciones, antes de volver a conectarla
a la fuente de poder.
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE
SPEED CONTROL DEVICES.
PRECAUCIÓN: No utilice gasolina, bencina, acetona, limpiadores
abrasivos, etc. puesto que dañarán el Ventilador. NUNCA use ALCOHOL
O SOLVENTES.
LUBRICACIÓN: Los cojinetes de precisión vienen sellados de por vida en
la fábrica y no precisarán ninguna lubricación adicional.
ALMACENAMIENTO: Guarde el Ventilador con estas instrucciones en un
lugar fresco y seco.
9046010
9046009
9046008B
9046005
1
3
1
1
10 Tornillos para placa de montaje de pared
11 Placa de montaje de pared
12 Control remoto
SAVE THESE
INSTRUCTIONS
9046ES
4
Rev. A 5/08
1
Rev. A 5/08
9046ES
|