Washer-Extractors
Cabinet Freestanding Installation and Operating Instructions
Part No. F232148R2EN
December 2007
Installation/Operation Supplement
Safety Information..............................................................................
2
Table of
Contents
Installation...........................................................................................
4
Dimensions ........................................................................................... 11
Operation............................................................................................. 21
V-Computer.......................................................................................... 21
WE-6 Computer.................................................................................... 23
Disposal of Unit................................................................................... 25
© Copyright 2007, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any
means without the expressed written consent of the publisher.
F232148 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1
Installation/Operation Supplement
Safety Information
Precautionary statements (“DANGER,” “WARNING,”
and “CAUTION”), followed by specific instructions,
are found in this manual and on machine decals. These
precautions are intended for the personal safety of the
operator, user, servicer and those maintaining the
machine.
Important Safety Instructions
WARNING
To reduce the risk of fire, electric shock,
serious injury or death to persons when
using your washer, follow these basic
precautions:
DANGER
W023
DANGER indicates the presence of a
hazard that will cause severe personal
injury, death, or substantial property
damage if the danger is ignored.
1. Read all instructions before using the washer.
2. Refer to the GROUNDING INSTRUCTIONS in
the INSTALLATION manual for the proper
grounding of the washer.
3. Do not wash textiles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry-cleaning solvents, or other
WARNING
WARNING indicates the presence of a
hazard that can cause severe personal
injury, death, or substantial property
damage if the warning is ignored.
flammable or explosive substances as they give
off vapors that could ignite or explode.
4. Do not add gasoline, dry-cleaning solvents, or
other flammable or explosive substances to the
wash water. These substances give off vapors that
could ignite or explode.
CAUTION
5. Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS
IS EXPLOSIVE. If the hot water system has not
been used for such a period, before using a
washing machine or combination washer-dryer,
turn on all hot water faucets and let the water
flow from each for several minutes. This will
release any accumulated hydrogen gas. The gas is
flammable; do not smoke or use an open flame
during this time.
CAUTION indicates the presence of a
hazard that will or can cause minor
personal injury or property damage if the
caution is ignored.
Additional precautionary statements (“IMPORTANT”
and “NOTE”) are followed by specific instructions.
IMPORTANT: The word “IMPORTANT” is used
to inform the reader of specific procedures where
minor machine damage will occur if the procedure
is not followed.
6. Do not allow children to play on or in the washer.
Close supervision of children is necessary when
the washer is used near children. This is a safety
rule for all appliances.
NOTE: The word “NOTE” is used to communicate
installation, operation, maintenance or servicing
information that is important but not hazard
related.
7. Before the washer is removed from service or
discarded, remove the door to the washing
compartment.
8. Do not reach into the washer if the wash drum is
moving.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
2
Installation/Operation Supplement
9. Do not install or store the washer where it will be
exposed to water and/or weather.
19. Replace worn power cords and/or loose plugs.
20. Be sure water connections have a shut-off valve
and that fill hose connections are tight. CLOSE
the shut-off valves at the end of each wash day.
10. Do not tamper with the controls.
11. Do not repair or replace any part of the washer, or
attempt any servicing unless specifically
21. Loading door MUST BE CLOSED anytime the
washer is to fill, tumble or spin. DO NOT bypass
the loading door switch by permitting the washer
to operate with the loading door open.
recommended in the user-maintenance instructions
or in published user-repair instructions that the
user understands and has the skills to carry out.
12. To reduce the risk of an electric shock or fire, DO
NOT use an extension cord or an adapter to
22. Always read and follow manufacturer’s
instructions on packages of laundry and cleaning
aids. Heed all warnings or precautions. To reduce
the risk of poisoning or chemical burns, keep
them out of the reach of children at all times
(preferably in a locked cabinet).
connect the washer to the electrical power source.
13. Use washer only for its intended purpose,
washing textiles.
14. ALWAYS disconnect the washer from electrical
supply before attempting any service. Disconnect
the power cord by grasping the plug, not the cord.
23. Always follow the fabric care instructions
supplied by the textile manufacturer.
24. Never operate the washer with any guards and/or
panels removed.
15. Install the washer according to the
INSTALLATION INSTRUCTIONS. All
connections for water, drain, electrical power and
grounding must comply with local codes and be
made by licensed personnel when required.
25. DO NOT operate the washer with missing or
broken parts.
26. DO NOT bypass any safety devices.
16. To reduce the risk of fire, textiles which have
traces of any flammable substances such as
vegetable oil, cooking oil, machine oil,
27. Failure to install, maintain, and/or operate this
washer according to the manufacturer’s
instructions may result in conditions which can
produce bodily injury and/or property damage.
flammable chemicals, thinner, etc. or anything
containing wax or chemicals such as in mops and
cleaning cloths, must not be put into the washer.
These flammable substances may cause the
fabric to catch on fire by itself.
NOTE: The WARNING and IMPORTANT
SAFETY INSTRUCTIONS appearing in this
manual are not meant to cover all possible
conditions and situations that may occur. Common
sense, caution and care must be exercised when
installing, maintaining, or operating the washer.
17. Do not use fabric softeners or products to
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
18. Keep washer in good condition. Bumping or
dropping the washer can damage safety features.
If this occurs, have washer checked by a qualified
service person.
Any problems or conditions not understood should be
reported to the dealer, distributor, service agent or the
manufacturer.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
3
Installation/Operation Supplement
Installation
General Specifications
V-Computer
SF18VNV, SF25VNV, UF18VNV, and
UF25VNV Models
18 Pound
Overall Dimensions
25 Pound
Overall width, mm (in.)
Overall height, mm (in.)
Overall depth, mm (in.)
737 (29.0)
1168 (46.0)
833 (32.8)
813 (32.0)
1232 (48.5)
940 (37.0)
Weight and Shipping Information
Net weight, kg (lbs.)
250 (550)
250 (550)
318 (700)
341 (750)
N/A
Domestic shipping weight, kg (lbs.)
3
3
Domestic shipping volume, m (ft )
Export shipping weight, kg (lbs.)
0.98 (34.6)
272 (600)
363 (800)
N/A
3
3
Export shipping volume, m (ft )
1.17 (41.44)
Wash Cylinder Information
533 (21.0)
Cylinder diameter, mm (in.)
Cylinder depth, mm (in.)
610 (24.0)
406 (16.0)
119 (4.19)
4,77 (0.188)
23
349 (13.75)
3
Cylinder volume, l (ft )
78 (2.76)
Perforation size, mm (in.)
4.77 (0.188)
Perforation open area, %
23
Load capacity (dry cloth weight), kg (lbs.)
8.16 (18)
11.34 (25)
Door Opening Information
305 (12.0)
Door opening size, mm (in.)
364 (14.345)
511 (20.1)
Height of door bottom above floor, mm (in.)
518 (20.4)
Water Consumption
Average water consumption
per cycle, l (gal.)
HOT
87 (23)
42 (11)
106 (28)
49 (13)
COLD
Table 1 (Continued)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
4
Installation/Operation Supplement
25 Pound
Table 1 (Continued)
18 Pound
Power Consumption
Average power used per cycle, kWh
Nominal sound emission, dBA
0.2
58
0.3
Data not available
113 (450)
Average HVAC load, kcal/hr (Btu/hr)
101 (400)
Drive Train Information
Number of motors in drive train
Drive motor power, kW (HP)
1
1
0.75 (1.0)
1.50 (2.0)
Cylinder Speeds
Low wash/reverse speed, RPM
Normal wash/reverse speed, RPM
Distribution speed, RPM
Extract l, RPM
29
27
49
52
86
73
534
500
641
1011
Extract 2, RPM
685
Extract 3, RPM
1080
Centrifugal Force Data
Low wash/reverse centrifugal force, Gs
Normal wash/reverse centrifugal force, Gs
Distribution centrifugal force, Gs
Extract 1 centrifugal force, Gs
0.25
0.80
0.80
1.80
85
0.80
2.20
85
Extract 2 centrifugal force, Gs
140
140
348
Extract 3 centrifugal force, Gs
348
Load Balancing
AC drive
Balance detection system
AC drive
Direct Steam Heating (Optional)
DN15 (1/2 NPT)
Steam inlet connection size, mm (in.)
Number of steam inlets
DN15 (1/2 NPT)
1
1
Steam required to
raise bath temperature
10 °C, kg (10 °F, lb.)
LOW
MED
HIGH
0.81 (1.13)
0.90 (1.25)
1.04 (1.45)
11.7 (0.75)
1.05 (1.46)
1.16 (1.61)
1.33 (1.85)
15 (0.96)
Average steam use per cycle, kg (bhp)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
5
Installation/Operation Supplement
WE-6 Computer
SF35PV, SF50PV, SF85PV, UF35PV,
UF50PV, and UF85PV Models
35 Pound
50 Pound
85 Pound
Overall Dimensions
Overall width, mm (in.)
Overall height, mm (in.)
Overall depth, mm (in.)
889 (35)
1407 (55.4)
992 (39)
990 (39)
1514 (59.6Z)
1049 (41.3)
1181 (46.5)
1781 (70.1)
1270 (50)
Weight and Shipping Information
550 (1212)
Net weight, kg (lbs.)
726 (1600)
749(1650)
2.26 (80)
1362 (3000)
1407 (3100)
3.46 (123)
Domestic shipping weight, kg (lbs.)
572 (1260)
1.80 (63.6)
580 (1275)
1.85 (65.3)
3
3
Domestic shipping volume, m (ft )
Export shipping weight, kg (lbs.)
1750 (795)
2.36 (83.5)
3200 (1453)
3.86 (137)
3
3
Export shipping volume, m (ft )
Wash Cylinder Information
Cylinder diameter, mm (in.)
Cylinder depth, mm (in.)
668 (26.25)
467 (18.375)
164 (5.79)
0.188 (4.77)
23
762 (30)
508 (20)
232 (8.19)
0.188 (4.77)
23
914 (36)
61 (240)
400 (14.1)
4.77 (0.188)
23
3
Cylinder volume, l (ft )
Perforation size, mm (in.)
Perforation open area, %
Door Opening Information
Door opening size, mm (in.)
354 (13.9)
636 (25)
413 (16.25)
23 (585)
445 (17.5)
32.7 (831)
Height of door bottom above floor, mm (in.)
Water Consumption
Average water consumption per cycle, l (gal.)
Average hot water consumed per hour, l (gal.)
HOT
47 (178)
79 (21)
216 (57)
98 (26)
407 (108)
190 (50)
579 (153)
COLD
276 (73)
322 (85)
Power Consumption
Average power used per cycle, kWh
Average HVAC load, kcal/hr (Btu/hr)
Nominal sound emission, dBA
Background noise level, dBA
0.4
125 (500)
70
0.6
213 (850)
76
0.9
300 (1200)
75
54
49
55
Drive Train Information
Number of motors in drive train
Drive motor power, kW (HP)
1
1
1
2.2 (3)
3.7 (5.0)
5.6 (7.5)
Table 2 (Continued)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
6
Installation/Operation Supplement
Table 2 (Continued)
35 Pound
50 Pound
85 Pound
Cylinder Speeds
Gentle wash/reverse speed, RPM
Wash/reverse speed, RPM
Distribution/drain speed, RPM
Medium extract speed, RPM
High extract speed l, RPM
High extract speed 2, RPM
High extract speed 3, RPM
26
43
26
40
26
41
77
73
65
325
475
610
960
305
445
575
900
280
410
525
825
Centrifugal Force Data
Gentle wash/reverse centrifugal force, Gs
Wash/reverse centrifugal force, Gs
Distribution/drain centrifugal force, Gs
Medium extract centrifugal force, Gs
High extract 1 centrifugal force, Gs
High extract 2 centrifugal force, Gs
High extract 3 centrifugal force, Gs
0.25
0.69
2.2
0.29
0.68
2.3
0.345
0.858
2.16
40
40
40
85
84
85.8
141
140
345
141
345
348
Balance Detection
Vibration safety switch installed
Standard
Standard
Standard
Direct Steam Heating (Optional)
Steam inlet connection size, mm (in.)
Number of steam inlets
DN15
DN15 (0.5)
DN15 (0.5)
1
DN15 (0.5)
1
1
Steam required to raise bath temperature
10°C, kg (10°F, lb.)
LOW
MED
HIGH
2.22 (1.6)
2.52 (1.81)
2.84 (2.04)
1.47 (23)
2.91 (2.42)
2.42 (3.46)
2.73 (3.80)
1.95 (30.6)
3.8 (5.2)
4.3 (5.9)
4.9 (6.9)
54.9 (3.5)
Average steam use per cycle, kg (bhp)
Electric Heating (Optional)
15.6
Total electric heating capacity, kW
Number of electrical heat elements
Electrical heat element size, kW
23.4
9
31.2
12
6
2.6
2.6
2.6
Time required to raise bath temperature
10°C, min. (10°F, min.)
LOW
MED
HIGH
3.9 (2.6)
4.5 (2.9)
5.0 (3.3)
3.6 (2.4)
4.2 (2.7)
4.7 (3.1)
3.1 (4.8)
3.5 (5.4)
6.4 (4.1)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
7
Installation/Operation Supplement
SF135PV, SF250PV, UF135PV, and
UF250PV Models
135 Pound
Standard
250 Pound
ForwardTilt
Option
Two-Way
Tilt Option
Standard
Overall Dimensions
1803 (71)
Overall width, mm (in.)
Overall height, mm (in.)
Overall depth, mm (in.)
1957 (77)
2083 (82)
2235 (88)
2006 (79)
2235 (88)
2243 (88.3)
2006 (79)
2235 (88)
2311 91()
1829 (75)
1537 (60.5)
Weight and Shipping Information
Net weight, kg (lbs.)
1818 (4000)
1909 (4200)
3661 (8070)
4000 (8800)
4000 (8800)
11.5 (409)
4355 (9600)
4445 (9800)
11.5 (409)
Domestic shipping weight, kg (lbs.)
3951 (8270)
11.5 (409)
3860 (8500)
11.5 (409)
3
3
Domestic shipping volume, m (ft )
Export shipping weight, kg (lbs.)
6.35 (227)
2045 (4500)
4227 (9300) 4581 (10,100)
3
3
Export shipping volume, m (ft )
6.39 (248)
11.5 (409)
11.5 (409)
Wash Cylinder Information
1092 (43)
Cylinder diameter, mm (in.)
Cylinder depth, mm (in.)
1321 (52)
813 (32)
1114 (39.3)
4.76 (0.188)
20
1321 (52)
813 (32)
1114 (39.3)
4.76 (0.188)
20
1321 (52)
813 (32)
1114 (39.3)
4.76 (0.188)
20
635 (25)
3
Cylinder volume, l (ft )
596 (21.0)
Perforation size, mm (in.)
Perforation open area, %
4.77 (0.188)
23
Door Opening Information
584 (23)
Door opening size, mm (in.)
724 (28.5)
784 (30.9)
724 (28.5)
937 (36.9)
724 (28.5)
937 (36.9)
Height of door bottom above floor, mm (in.)
718 (28.25)
Water Consumption
Average water consumption per cycle, l (gal.)
Average hot water consumed per hour, l (gal.)
HOT
590 (156)
437 (116)
1023 (270)
905 (239)
424 (112)
1355 (358)
905 (239)
424 (112)
1355 (358)
905 (239)
424 (112)
1355 (358)
COLD
Power Consumption
Average power used per cycle, kWh
Average HVAC load, kcal/hr (Btu/hr)
Nominal sound emission, dBA
0.9
375 (1500)
75
1.5 (Est.)
550 (2200)
75
1.5 (Est.)
550 (2200)
N/A
1.5 (Est.)
550 (2200)
N/A
Drive Train Information
Number of motors in drive train
Drive motor power, kW (HP)
1
7.5 (10)
1
1
1
18.5 (25)
18.5 (25)
18.5 (25)
Table 3 (Continued)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
8
Installation/Operation Supplement
250 Pound
Table 3 (Continued)
135 Pound
ForwardTilt
Option
Two-Way
Tilt Option
Standard
Standard
Cylinder Speeds
1/2 Wash/reverse speed, RPM
Wash/reverse speed, RPM
Distribution speed, RPM
Medium extract speed, RPM
High extract speed l, RPM
High extract speed 2, RPM
High extract speed 3, RPM
26
21
31
21
31
21
31
36
62
54
54
54
170
140
340
435
650
140
340
435
650
140
340
435
650
375
480
715
Centrifugal Force Data
1/2 Wash/reverse centrifugal force, Gs
Wash/reverse centrifugal force, Gs
Distribution centrifugal force, Gs
Medium extract centrifugal force, Gs
High extract 1 centrifugal force, Gs
High extract 2 centrifugal force, Gs
High extract 3 centrifugal force, Gs
0.412
0.325
0.708
2.15
14.7
86.9
142
0.325
0.708
2.15
14.7
86.9
142
0.325
0.708
2.15
14.7
86.9
142
0.790
2.34
17.6
85.8
141
312
318
318
318
Balance Detection
Standard
Vibration safety switch installed
Standard
Standard
Standard
Direct Steam Heating (Optional)
Steam inlet connection size, mm (in.)
Number of steam inlets
DN19 (0.75)
1
DN25 (1.0)
DN25 (1.0)
1
DN25 (1.0)
1
1
Steam required to raise bath temperature
10 °C, kg (10 ° F, lb.)
LOW
3.11 (6.84)
4.40 (9.67)
4.78
5.23 (11.5)
7.91 (17.4)
9.0
5.23 (11.5)
17.4 (7.91)
9.0
5.23 (11.5)
17.4 (7.91)
9.0
HIGH
Average steam use per cycle, bhp
Electric Heating (Optional)
Total electric heating capacity, kW
Number of electrical heat elements
Electrical heat element size, kW
45
18
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2.5
Time required to raise bath temperature
10°C, min. (10°F, min.)
LOW
5.0 (3.2)
6.4 (4.2)
HIGH
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
9
Installation/Operation Supplement
Dimensional Clearances
NOTE: The dimensions shown here are for
planning purposes only. They are approximate and
subject to normal manufacturing tolerances. If
exact dimensions are required for construction
purposes, contact the distributor or manufacturer.
We reserve the right to make changes at any time
without notice.
V-Computer
SF18VNV, SF25VNV, UF18VNV, and
UF25VNV Models
Both single and multiple machine installations require
specified minimum clearances on all sides of each
machine. Tables below show these clearances.
Recommended Minimum Clearances
18 Pound
305 (12)
50 (2)
25 Pound
305 (12)
50 (2)
Minimum rear clearance, mm (in.)
Minimum clearance between machine and wall, mm (in.)
Minimum clearance between machines (side), mm (in.)
Minimum front clearance, mm (in.)
25 (1)
25 (1)
406 (16)
445 (17.5)
Table 4
WE-6 Computer
SF35-85PV, UF35-85PV, SF135-250PV, and
UF135-250PV Models
Recommended Minimum Clearances
135
Pound
250 Pound
35
Pound
50
Pound
85
Pound
Forward
Tilt
Option*
Two-Way
Tilt
Option*
Standard Standard
Minimum rear clearance,
mm (in.)
450 (18)
150 (6)
450 (18)
150 (6)
450 (18)
150 (6)
610 (24)
457 (18)
457 (18)
584 (23)
610 (24)
457 (18)
457 (18)
914 (36)
914 (36)
457 (18)
457 (18)
914 (36)
914 (36)
457 (18)
457 (18)
914 (36)
Minimum clearance between
machine and wall, mm (in.)
Minimum clearance between
machines (side), mm (in.)
25.4 (1)
533 (21)
25.4 (1)
584 (23)
25.4 (1)
584 (23)
Minimum front clearance,
mm (in.)
* Machines equipped with the tilt option require a minimum overhead clearance as well. Refer to Figure 7 for the minimum
overhead clearance for the 250 pound capacity model with tilt option.
Table 5
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
10
Installation/Operation Supplement
18 Pound
25 Pound
659 mm (26 in.)
492 mm (19-13/32 in.)
440 mm (17-5/16 in.)
686 mm (27 in.)
508 mm (20 in.)
432 mm (17 in.)
A
B
C
D
E
F
1161 mm (45-23/32 in.) 1232 mm (48-1/2 in.)
686 mm (27 in.)
737 mm (29 in.)
762 mm (30 in.)
813 mm (32 in.)
18 mm (23/32 in.)
1143 mm (45 in.)
18 mm (23/32 in.)
1214 mm (47-13/16 in.)
25 mm (1 in.)
G
H
I
25 mm (1 in.)
774 mm (30-1/2 in.)
709 mm (27-15/16 in.)
33 mm (1-5/16 in.)
530 mm (20-29/32 in.)
430 mm (16-29/32 in.)
876 mm (34-1/2 in.)
816 mm (32-1/8 in.)
38 mm (1-1/2 in.)
597 mm (23-1/2 in.)
495 mm (19-1/2 in.)
J
K
L
M
N
O
P
Q
R
S
1074 mm (42-5/16 in.) 1074 mm (42-5/16 in.)
173 mm (6-13/16 in.)
86 mm (3-13/32 in.)
1029 mm (40-1/2 in.)
114 mm (4-1/2 in.)
211 mm (8-5/16 in.)
86 mm (3-13/32 in.)
1067 mm (42 in.)
4-13/16 in. (122 mm)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
12
Installation/Operation Supplement
WE-6 Computer
SF35PV and UF35PV Models
814 mm
(32")
638 mm
(25 1/10")
559 mm
(22")
889 mm
(35")
992 mm
(39")
Front
Side
828 mm
(32 3/5")
1
813 mm
(32")
2
606 mm
(23 9/10")
3
1408 mm
(55 2/5")
1255 mm
(49 2/5")
1323 mm
(52 1/10")
1031 mm
(40 3/5")
300 mm
(11 4/5")
209 mm
(8 1/5")
279 mm
(11")
4
5
Rear
B145I
1
2
3
Cold Water
Hot Water
Steam Inlet
4
5
76 mm (3 in.) Reuse Drain Outlet
76 mm (3 in.) Drain Outlet
Figure 2
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
13
Installation/Operation Supplement
SF50PV, UF50PV, SF85PV, and
UF85PV Models
A
B
C
D
E
Side
Front
1
2
F
G
3
H
I
J
N
M
4
5
K
L
Rear
B146I
1
2
3
Cold Water
Hot Water
Steam Inlet
4
5
76 mm (3 in.) Reuse Drain Outlet
76 mm (3 in.) Drain Outlet
Figure 3
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
14
Installation/Operation Supplement
50 Pound
85 Pound
872 mm (34-3/10 in.)
26-1/5 in. (666 mm)
582 mm (22-9/10 in.)
991 mm (39 in.)
1054 mm (41-1/2 in.)
831 mm (32-7/10 in.)
765 mm (30-1/10 in.)
1181 mm (46-1/2 in.)
1270 mm (50 in.)
A
B
C
D
E
F
1049 mm (41-3/10 in.)
930 mm (36-3/5 in.)
889 mm (35 in.)
1107 mm (43-3/5 in.)
1083 mm (42-3/5 in.)
758 mm (29-9/10 in.)
1781 mm (70-1/10 in.)
1685 mm (66-2/5 in.)
254 mm (10 in.)
G
H
I
619 mm (24-2/5 in.)
1513 mm (59-3/5 in.)
1399 mm (55-1/10 in.)
260 mm (10-1/5 in.)
260 mm (10-1/5 in.)
300 mm (11-4/5 in.)
1136 mm (44-7/10 in.)
J
K
L
197 mm (7-3/4 in.)
281 mm (11-1/10 in.)
1328 mm (52-3/8 in.)
M
N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
15
Installation/Operation Supplement
135 Pound Capacity Models
1905 mm
(75")
1664 mm
(65 1/2")
1060 mm
(41 3/4")
768 mm
(30 1/4")
1575 mm
(62")
718 mm
(28 1/4")
1549 mm
(61")
1803 mm
(71")
1491 mm
(58 11/16")
Front
Side
1457 mm
(57 5/16")
3
4
2
1
1376 mm
(54 3/16")
5
6
992 mm
(39 3/32")
952 mm
(37 1/2")
913 mm
(35 29/32")
584 mm
(23")
529 mm
(20 13/16")
10
9
1803 mm
(71")
1468 mm
(57 13/16")
1430 mm
(56 5/16")
1829 mm
(72")
1435 mm
(56 1/2")
1715 mm
(67 1/2")
509 mm
(20 1/16")
521 mm
(20 1/2")
171 mm
(6 3/4")
7
Rear
8
R012I
1
2
3
4
5
Recirculation Port
Extra Fill Valve
Cold Water Inlet
Vent
6
7
8
9
10
Steam Inlet
Drain Outlet
Reuse Drain Outlet
Main Power
Hot Water Inlet
External Supply Signal
Figure 4
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
16
Installation/Operation Supplement
250 Pound Capacity Models
721 mm
(28 3/8")
559 mm
(22")
2083 mm
(82")
1207 mm
(47 1/2")
1740 mm
(68 1/2")
829 mm
(32 5/8")
483 mm
(19")
1034 mm
(40 11/16")
483 mm
(19")
784 mm
(30 7/8")
1829 mm
(72")
2037 mm
(80 3/16")
1957 mm
(77 1/16")
1744 mm
(68 11/16")
1639 mm
(64 1/2")
Front
Side
292 mm
(11 1/2")
1615 mm
(63 5/8")
1
3
2
4
5
1198 mm
(47 3/16")
1096 mm
(43 3/16")
6
912 mm
(35 29/32")
10
9
712 mm
(28")
1997 mm
(78 5/8")
1960 mm
(77 3/16")
1584 mm
(62 3/8")
1763 mm
(69 13/32")
1530 mm
(60 1/4")
218 mm
(8 5/8")
1446 mm
(59 29/32")
572 mm
(22 1/2")
572 mm
(22 1/2")
8
7
Rear
R070I
1
2
3
4
5
Recirculation Port
Extra Fill Valve
Hot Water Inlet
Vent
6
7
8
9
10
Steam Inlet
Drain Outlet
Reuse Drain Outlet
External Supply Signal
Main Power
Cold Water Inlet
Figure 5
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
17
Installation/Operation Supplement
250 Pound Capacity Models
with Forward Tilt or Two-Way Tilt Option
H
I
J
A
B
G
F
E
C
D
K
4
3
2
1
L
Front
Side
M
N
5
O
P
9
Q
R
8
AA
S
T
Z
Y
U
X
V
6
W
7
Rear
R074IE3A
1
2
3
4
5
Recirculation Port
Extra Fill Valve
Hot Water Inlet
Vent
6
7
8
9
Drain Outlet
Reuse Drain Outlet
External Supply Signal
Main Power
Cold Water Inlet
Figure 6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
18
Installation/Operation Supplement
Forward Tilt
Two-Way Tilt
2235 mm (88 in.)
2235 mm (88 in.)
A
B
C
D
E
F
1736 mm (74-13/32 in.) 1736 mm (74-13/32 in.)
1930 mm (76 in.)
2057 mm (81 in.)
1930 mm (76 in.)
2006 mm (79 in.)
936 mm (36-7/8 in.)
981 mm (38-19/32 in.)
1359 mm (53-1/2 in.)
936 mm (36-7/8 in.)
981 mm (38-5/8 in.)
1359 mm (53-1/2 in.)
G
H
I
2037 mm (80-3/16 in.) 2037 mm (80-3/16 in.)
721 mm (28-3/8 in.)
559 mm (22 in.)
721 mm (28-3/8 in.)
559 mm (22 in.)
J
2254 mm (88-3/4 in.)
2311 mm (91 in.)
K
L
1174 mm (68-11/16 in.) 1174 mm (68-11/16 in.)
1639 mm (64-1/2 in.)
1615 mm (63-5/8 in.)
1639 mm (64-1/2 in.)
1615 mm (63-5/8 in.)
M
N
O
P
Q
R
S
T
1198 mm (47-3/16 in.) 1198 mm (47-3/16 in.)
1096 mm (43-3/16 in.) 1096 mm (43-3/16 in.)
912 mm (35-29/32 in.) 912 mm (35-29/32 in.)
712 mm (28 in.)
2121 mm (83-1/2 in.)
1930 mm (76 in.)
712 mm (28 in.)
2121 mm (83-1/2 in.)
1930 mm (76 in.)
1613 mm (63-1/2 in.)
1613 mm (63-1/2 in.)
U
V
W
X
Y
Z
620 mm (24-13/32 in.) 620 mm (24-13/32 in.)
620 mm (24-13/32 in.) 620 mm (24-13/32 in.)
370 mm (14-5/8 in.)
1683 mm (66-1/4 in.)
1737 mm (68-3/8 in.)
2149 mm (84-5/8 in.)
370 mm (14-5/8 in.)
1683 mm (66-1/4 in.)
1737 mm (68-3/8 in.)
2149 mm (84-5/8 in.)
AA
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
19
Installation/Operation Supplement
250 Pound Capacity Models
with Forward and Two-Way Tilt Option
13°
13°
2622 mm
(103 1/4")
330 mm
(13")
330 mm
(13")
914 mm (36") Recommended
762 mm (30") Allowable
475 mm (18")
Compacted fill dirt
CFS219N
Figure 7
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
20
Installation/Operation Supplement
Operation
5. Load to capacity whenever possible. DO NOT
V-Computer
1. Turn on main power source (circuit breaker).
2. Turn on the ON/OFF switch on the front panel to
3. Push button and turn handle clockwise. Refer to
U003IE1A
Figure 10
6. Close door and turn handle counterclockwise
U001IE1B
Figure 8
4. Press and hold the DOOR UNLOCK button on
the left side of the control panel while performing
1
2
U005IE1B
Figure 11
CFS1N
1
2
DOOR UNLOCK Button
ON/OFF Switch
Figure 9
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
21
Installation/Operation Supplement
7. Add liquid and/or powder supplies to supply
a. Add detergent to container 1.
b. Add detergent or bleach to container 2.
c. Add softener to container 3.
3
2
4
1
CYCLE SELECTION
NOTE: Liquid supplies may be injected directly
into the supply dispenser by an external chemical
supply dispenser. Refer to Installation and
Programming manuals.
B159R
1
Up
2
3
4
Down
Start
Stop
3
1
Figure 13
10. When applicable, add bleach when the display
2
B163R
1
2
3
Detergent Container
Detergent or Bleach Container
Softener Container
CYCLE SELECTION
Figure 12
9. Press the UP and DOWN keys to select wash
B160R
Figure 14
NOTE: To stop a cycle at any time, press the STOP
key.
NOTE: To display the temperature of the water
while a cycle is running, press the UP key. To
display the number of the cycle in progress, press
the START key.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
22
Installation/Operation Supplement
NOTE: For models with tilt, refer to “Loading
Using Tilt Option” at the end of this section.
WE-6 Computer
1. Turn on main power source (circuit breaker).
4. Close door and turn handle clockwise until it
locks.
2. Use left hand to press and hold the door unlock
button on top of the door box cover. Use right
hand to turn door handle counterclockwise and
5. Add powder supplies to supply dispenser.
NOTE: Liquid supplies may be injected directly
into the supply dispenser by an external chemical
supply dispenser. Refer to Installation and
Programming manuals.
6. Select wash cycle from cycle charts located in the
Programming section of the Programming
Manual.
7. Enter the cycle number, 01-39, on the keypad.
U153R
Output Indicators
Supply 1
Supply 2
Supply 3
Supply 4
Supply 5
Cold Fill
Hot Fill
Heat
Forward
Reverse
Figure 15
Dist. Speed
Med. Speed
High Speed
Unlock Door
Drain Closed
Auxiliary 1
Auxiliary 2
3. Load to capacity whenever possible. DO NOT
Spare
Spare
Signal
U
U152R
Figure 17
9. When cycle is complete and the display reads
“DONE”, open door by pressing and holding the
door unlock button.
A
10. Unload.
U003IE1A
Figure 16
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
23
Installation/Operation Supplement
Loading Using Tilt Option
Forward Tilt Machines
1. Open loading door and secure it to the door latch
on the right side of the machine.
Two-Way Tilt Machines
1. Open loading door and secure it to the door latch
on the right side of the machine.
2. Check that selector on the pendant switch is in
the CENTER position. If machine is in the
FORWARD position, turn the selector to the
CENTER position. While holding down the
ENABLE button, press the REVERSE button to
center the machine.
2. Turn the selector on the pendant switch left to the
3. Load the machine.
4. Unlatch and close loading door.
Unloading Using Tilt Option
1
Forward and Two-Way Tilt Machines
ENABLE
FORWARD
REVERSE
1. Open loading door and secure it to the door latch
on the right side of the machine.
2. Turn the selector on the pendant switch right to
3. While holding down the ENABLE button, press
the FORWARD button to tilt forward.
4. Unload the machine.
5. Turn the selector back to the CENTER position
to lower the machine.
6. Unlatch and close loading door.
U150R
1
Selector Dial
Figure 18
3. While holding down the ENABLE button, press
the REVERSE button to tilt backward.
4. Load the machine.
5. Turn the selector back to the CENTER position
to lower the machine.
6. Unlatch and close loading door.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
24
Installation/Operation Supplement
Disposal of Unit
This appliance is marked according to the European
directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE).
This symbol on the product or on its packaging
indicates that this product shall not be treated as
handed over to the applicable collection point for the
recycling of electrical and electronic equipment.
Ensuring this product is disposed of correctly will help
prevent potential negative consequences for the
environment and human health which could otherwise
be caused by inappropriate waste handling of this
product. The recycling of materials will help to
conserve natural resources. For more detailed
information about recycling of this product, please
contact the local city office, household waste disposal
service, or the source from which the product was
purchased.
MIX1N
Figure 19
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232148 (EN)
25
|