Standard Collection®
PEDESTAL SINK
FIRE CLAY
Standard Collection® PEDESTAL SINK
• Authentically styled circa “1922” oval pedestal
• Made from fine fireclay
• Front overflow
• Supplied with mounting kit
• Design matched to Standard Collection® fixtures
• Right Height™ for greater comfort
• Recommended design matched 8" spread faucet
#2881 available in chrome or satin finish
❏ 0283.800 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
26-3/4" x 20" x 36"
(679 x 508 x 914mm)
Separate Components:
13
❏ 0283.008 Pedestal top 8" (203mm) centers
❏ 0067.000 Pedestal only
(330mm)
8
3-7/8
(98mm)
(203mm)
Bowl sizes:
10-1/4
(260mm)
16-3/4" (425mm) wide
11-1/4" (286mm) front to back
6-1/4" (159mm) deep
3/4
(19mm)
20
1-3/4" DIA.
(508mm)
STD. DRAIN
OUTLET
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
26-3/4
(680mm)
6-3/4
(171mm)
7-1/2
• CAN/CSA B45 Series
DRAIN
CHASE
(191mm)
3/8" DIA.
HOLES FOR
ANCHOR BOLTS
8 (203mm)
SUPPLIES AS
REQUIRED
To Be Specified:
28-1/2
(724mm)
36
(914mm)
1-1/4 O.D.
WASTE
❏ Color: ❏ White ❏ Linen
❏ Recommended Faucet: 8" spread No. 2881
❏ Faucet Finish: Chrome or Satin
❏ Supplies:
OPEN
TO
FLOOR
1-1/4 O.D.
TAILPIECE
22
(559mm)
*
24
*
(610mm)
3/8" DIA.
BASE ANCHOR
SCREW HOLE
❏ 1-1/4" Trap:
PEDESTAL
SIDE SECTION
FINISHED
FLOOR
13
(330mm)
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J7
© 2008 AS America Inc.
Revised 2/08
|