ANTIQUITY™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
ANTIQUITY™ COUNTERTOP SINK
• Turn-of-the-century detailing on countertop sink
• Made from vitreous china
• Self-rimming with cutout template supplied
• Front overflow
• Faucet ledge (faucet not included)
❏ 0558.017 Faucet holes on 8" (203mm) centers
❏ 0554.012 Faucet holes on 4" (102mm) centers
(illustrated)
Nominal Dimensions:
616 x 457mm
(24-1/4" x 18")
FINISHED WALL
OR SPLASHBACK
Bowl sizes:
432mm (17") wide
267mm (10-1/2") front to back
140mm (5-1/2") deep
610mm
(24)
70mm
(2-3/4)
102mm
(4)
OPTIONAL
67mm
(2-5/8)
183mm
(7-3/16)
Compliance Certifications -
Meets or Exceeds the
Following Specifications:
• ASME A112.19.2M for
DRAWING FOR
203mm
(8)
MIN.
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
457mm
(18)
C/L
845mm
(33-1/4)
Vitreous China Fixtures
686mm
(27)
MIN.
616mm
(24-1/4)
152mm
(6)
MAX.
SEALING
COMPOUND
19mm
(3/4)
COUNTERTOP (BY OTHERS)
BARRIER FREE
CLEARANCE
229mm
(9)
178mm
(7)
MIN.
*
248mm
(9-3/4)
*343mm
203mm
(8)
SUPPLIES
AS REQ'D
(13-1/2)
178mm
(7)
1-1/4 O.D.
WASTE
787mm (31)
845mm (33-1/4)
FINISHED FLOOR
1-1/4 O.D
TAILPIECE
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
*Faucet:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
* See faucet section for additional models available
*
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 70mm (2-3/4") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
J29
© 2008 AS America Inc.
Revised 2/08
|