Installation
Instructions
LUXURY SHOWER
1660.130
EXTENDER BODY SPRAYS
1660.140
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
1660.130
1660.140
To ensure that your installation proceeds smoothly--
Certified to comply with ANSI A112.18.1
please read these instructions carefully before you begin.
M968617 Rev.1.2
Recommended Tools
2-1/4" DIA.
Flat Blade Screwdriver
Teflon Tape
Electric Drill
(57mm) Hole Saw
ROUGHING-IN DIMENSIONS
ALL CONNECTIONS 1/2" NPT
75mm
(3")
74mm D.
(2-15/16")
1660.130 Multifunction
Round Body Spray
1660.140 Multifunction
Square Body Spray
(75.6-82.6mm)
2-15/16" - 3-1/4"
26mm
(1")
12mm
(1/2")
15°
54mm D.
(2-1/8")
35mm
(1-3/8")
57mm D.
(2-1/4")
HOLE SIZE
1/2" NPT
FINISHED WALL
(63.6-70.6mm)
2-1/2" - 2-3/4"
INSTALL BODY SPRAY
3
Remove the PLASTER GUARD (1) if not already removed.
Make sure the O-RING (2) and FLANGE GASKET (6) are installed on the BODY SPRAY (3). Thread BODY SPRAY (3)
into the ELBOW (4).
Tighten BODY SPRAY (3) using WRENCH (5) supplied until flush against finished wall and FLANGE GASKET (6) is
compressed. Turn on water supply and test installed BODY SPRAY (3) for leaks and proper operation.
2
4
4
6
2
3
3
1
6
5
FINISHED WALL
5
INSTALL ESCUTCHEON
4
Align ribs on back of ESCUTCHEON (1, 2), with slots in BODY SPRAY (3). Push ESCUTCHEON (1, 2) against BODY
SPRAY (3) until ESCUTCHEON (1, 2) snaps into place.
Turn on water supply and test installed BODY SPRAY (3) for leaks and proper operation.
FINISHED WALL
ALIGNMENT RIBS ON
BACK OF ESCUTCHEON
SLOTS
ALIGNMENT RIBS ON
BACK OF ESCUTCHEON
3
1
2
2
1
CARE:
5
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
M968617 Rev.1.2
|