AT85RFD-07 Getting Started
..............................................................................................
User Guide
Section 1
Introduction
The AT85RFD-07 Starter Kit is designed to give designers a quick start to develop code
on the AT85C51SND3Bx as well as for prototyping and testing of new designs.
1.1
Atmel
Registration
In order to keep posted on any new information concerning the AT85C51SND3Bx prod-
ucts (new firmware delivery, new tool version, …) register at the following address:
As soon as you are registered, edit your preferences and ‘check’ the 8051 radio button
in the e-mail notification section.
AT85RFD-07 Getting Started User Guide
1-1
7712A–MP3–02/07
Section 2
Package Download
The Nand Flash memory of the AT85RFD-07 is delivered pre-programmed with the
demo firmware and AT85C51SND3B documentation. Since the board is manufactured
in large quantities, the package may be out of date. It is strongly recommended to down-
load the latest version of the AT85C51SND3B package from our web site.
The following paragraphs explain how to retrieve the package from the web site or from
the Nand Flash memory.
2.1
Web Site
download
1. Connect to:
User Name is: atmelmp3
Password is: snd3pass
2. Copy the at85c51snd3b.zip file to your PC.
3. Unzip the package to your local hard drive.
2.2
Nand Flash
Download
1. Connect the USB cable to the player and to a PC.
The demonstration firmware starts and enters the mass-storage application:
A new USB device is installed and a removable disk is mounted in the explorer:
Note: The disk letter may differ.
The AT85RFD-07 disk corresponds to the on-board Nand Flash memory.
AT85RFD-07 Getting Started User Guide
2-3
7712A–MP3–02/07
Package Download
2. Open the AT85RFD-07 disk, its content is as follows:
The Atmel directory contains the AT85C51SND3B package.
The Update directory is the location where to place the update package for the auto-
matic firmware upgrade feature (see firmware user’s guide).
3. Copy the Atmel directory to your local hard drive.
2.3
Package Content The package content is the following:
...... Development kit package
............. Dev-kit user’s guides
............. Link to dev-kit firmware
............. Hardware package
...... Reference design package
............. Ref-dsn user’s guides
............. Link to ref-dsn firmware
............. Hardware package
...... Link to datasheet on Atmel web site
...... Firmware packages
............. Firmware user’s guide & application notes
...... Development tools
............. Atmel font generator
............. Atmel in system programming
............. Atmel on-chip debug
.....................OCD dongle recovery tool
.....................Flip tool for dongle upgrade
.....................Keil debug drivers
............. Atmel screen generator
............. USB mass-storage drivers (Win98, Linux)
............. Freeware USB bench32 tool
...... Training material
............. Hands-on tutorial
............. Whole AT85C51SND3Bx presentations
2-4
AT85RFD-07 Getting Started User Guide
7712A–MP3–02/07
Section 3
Tools Install
3.1
Requirement
Firmware has been developed and debugged using the Keil® µvision IDE. It is a project
oriented fully integrated environment including debugger and advanced compiling and
linking options like code banking.
In order to start development with AT85C51SND3B, it is required that the Keil environ-
ment is installed on the PC.
3.2
In System
Programming
The in system programming install consists of:
ꢀ Atmel MusicPlayerIsp Tool
ꢀ Sun™ Java Run time Environment if necessary
3.2.1
MusicPlayerIsp
To install the Atmel MusicPlayerIsp, go to “Atmel\at85c51snd3b\Tools\In System Pro-
gramming” directory and execute music-player-isp-X_Y_Z.exe; where X_Y_Z is the tool
revision number.
ꢀ Press Next to proceed
AT85RFD-07 Getting Started User Guide
3-5
7712A–MP3–02/07
Tools Install
ꢀ Read and accept the licence agreement
ꢀ Select the installation directory (use the proposed default)
3-6
AT85RFD-07 Getting Started User Guide
7712A–MP3–02/07
Tools Install
ꢀ Validate the information
ꢀ The installation starts…
AT85RFD-07 Getting Started User Guide
3-7
7712A–MP3–02/07
Tools Install
ꢀ Do not restart your computer, exit the current session and log-in again
ꢀ Start MusicPlayerIsp to check Java runtime installation
ꢀ If the following pop-up appears, proceed with the SUN™ JRE installation
3.2.2
SUN JRE
To install the JRE, go to “Atmel\at85c51snd3b\Tools\In System Programming” directory
and click on the “Sun JRE download” URL shortcut.
Follow the install procedure of the SUN JRE.
3.3
USB Devices
Installation
In order to complete the installation, the AT85C51SND3B ISP USB device must be
installed.
3.3.1
AT85C51SND3B ISP A USB removable mass-storage disk will be installed after plug-in.
USB device
– Press the ISP button
– Plug the board to a PC using the USB cable
A new USB device is installed and one removable disk is mounted in the explorer:
Note: The disk letter may differ.
3-8
AT85RFD-07 Getting Started User Guide
7712A–MP3–02/07
Atmel Corporation
Atmel Operations
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Memory
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
Microcontrollers
Regional Headquarters
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
Asia
Room 1219
ASIC/ASSP/Smart Cards
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically providedot-
herwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as compo-
nents in applications intended to support or sustain life.
©2007 Atmel Corporation . All rights reserved. Atmel®, logo and combinations thereof, and Everywhere You Are® are the trademarks or regis-
tered trademarks, of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Printed on recycled paper.
7712A–MP3–02/07
|