STOP
3
730
720
730
720
normal
+
4
k
2
o c
l
lock
1
ck
lo
90°
Series
Series
r
Series
7
r
e
a
s
e
Series
7
re
le
a
s
e
5
Series
7
e
Series
7
r
e
le
a
s
e
r
e
a
s
e
Series
7
70S
e
a
6
7
8
Our products are designed to meet the highest
standards of quality, functionality and design.
We hope you enjoy your new Braun Shaver.
English
Read these instructions completely, it contains
safety information. Keep it for future reference.
Warnings
The shaver head is suitable for cleaning
under running tap water.
Detach the shaver from the power supply
before cleaning the shaver head in water.
Your shaving system is provided with a special
cord set, which has an integrated Safety Extra
Low Voltage power supply. Do not exchange or
tamper with any part of it, otherwise there is risk
of an electric shock. Only use the special cord
set provided with your appliance.
STOP
Do not shave with a damaged foil or cord.
This appliance is not intended for use by children
or persons with reduced physical or mental
capabilities, unless they are supervised by a
person responsible for their safety. In general,
we recommend that you keep the appliance
out of reach of children. Children should be
supervised to ensure that they do not play with
the appliance.
Oil bottle
Keep out of reach of children. Do not swallow.
Do not apply to eyes. Dispose of properly when
empty.
Description
1 Foil & Cutter cassette
2 Cassette release button
3 Shaver head lock switch
4 Pop-out long hair trimmer
5 On/off switch
6 (–) setting button (sensitive)
7 (+) setting button (intensive)
8 Reset button
9 Shaver display
0 Shaver power socket
q Travel case
w Special cord set
Charging
Recommended ambient temperature for
charging is 5 °C to 35 °C. The battery may not
charge properly or at all under extreme low or
high temperatures. Recommended ambient
temperature for shaving is 15 °C to 35 °C.
9
Do not expose the shaver to temperatures higher
than 50 °C for extended periods of time.
• Using the special cord set w, connect the
shaver to an electrical outlet with the motor
switched off and charge it for at least one hour.
• A full charge provides up to 50 minutes
of cordless shaving time. This may vary
according to your beard growth.
• If the rechargeable battery has run out of
power (discharged), you may also shave by
connecting the shaver to an electrical outlet via
the special cord set.
Shaver display 9
The green indicator flashes when the shaver is
being charged or when in use.
730
720
When the battery is fully charged, the charge
segment « » (720) / « » « » (730) will light
up continuously provided that the shaver is
switched on or connected to an electrical outlet.
Some minutes after completing the charging,
the shaver switches to the stand-by-mode:
The display turns off.
730
720
The red « » indicator flashes when the battery
capacity has dropped below 20%, provided the
shaver is switched on. The remaining capacity
will then be sufficient for 2 to 3 shaves.
Personalizing your shaver
Personalizing your shaver
With the (–) and (+) buttons you can choose
6
7
the best setting for shaving different areas of
your face and as per your specific needs. The
different settings are indicated by the pilot light
incorporated in the on/off switch
• dark blue (powerful shave)
• light blue (normal)
:
5
normal
+
• white (for a thorough comfortable shave in
sensitive areas of your face such as neck)
For a thorough and fast shave we recommend
the (+) setting.
When switching on next time, the last used
setting will be activated.
10
How to use
Press the on/off switch 5 to operate the shaver:
• The pivoting shaver head and floating foils
automatically adjust to every contour of your
face.
• To shave hard to reach areas (e.g. under the
nose) slide the shaver head lock switch 3 to
the back position to lock the pivoting head at
an angle.
k
2
o c
l
lock
1
• To trim sideburns, moustache or beard, slide
the pop-out long hair trimmer 4 upwards.
ck
lo
Tips for the perfect dry shave
For best shaving results, Braun recommends you
to follow 3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at right angles
(90°) to your skin.
3. Stretch your skin and shave against the
direction of your beard growth.
90°
Cleaning
Regular cleaning ensures better shaving
performance. Rinsing the shaver head under
running water after each shave is an easy and
fast way to keep it clean:
• Switch the shaver on (cordless) and rinse the
shaver head under hot running water. You may
use liquid soap without abrasive substances.
Rinse off all foam and let the shaver run for a
few more seconds.
Series
Series
r
• Next, switch off the shaver, press the release
button 2 to remove the Foil & Cutter cassette
1 and let it dry.
Series
7
r
e
a
s
e
• If you regularly clean the shaver under
water, then once a week apply a drop of
light machine oil on top of the Foil & Cutter
cassette.
Series
7
re
le
a
s
e
11
Alternatively, you may clean the shaver with a
brush:
Series
7
e
• Switch off the shaver. Remove the Foil & Cutter
cassette 1 and tap it out on a flat surface.
Using the brush, clean the inner area of the
pivoting head. However, do not clean the foil
and cutter cassette with the brush as this may
damage it.
Series
7
r
e
le
a
s
r
e
e
a
s
e
Keeping your shaver in top shape
Replacing the Foil & Cutter cassette/reset
To maintain 100% shaving performance,
replace the Foil & Cutter cassette 1, when the
replacement symbol lights up on the shaver
display 9 (after about 18 months) or when
cassette is worn.
The replacement symbol will remind you during
the next 7 shaves to replace the Foil & Cutter
cassette. Then the shaver will automatically reset
the display.
After you have replaced the Foil & Cutter
cassette, use a ball-pen to push the reset button
8 for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
Series
7
70S
r
e
Accessories
Available at your dealer or Braun Service
Centres:
• Foil & Cutter cassette 70S
Environmental notice
This product contains rechargeable
batteries. In the interest of protecting the
environment, please do not dispose of the
product in household waste at the end of
its useful life. Disposal can take place at a
Braun Service Centre or at appropriate
collection points provided in your country.
Subject to change without notice.
For electric specifications, see printing on the
special cord set.
12
Trouble-Shooting
Problem:
Possible reason:
Remedy:
SHAVER
Unpleasant
smell from the
shaver head.
1. Shaver head is
cleaned with water.
2. Cleaning cartridge is
in use for more than
8 weeks.
1. When cleaning the shaver head
with water only use hot water
and from time to time some
liquid soap (without abrasive
substances). Remove Foil &
Cutter cassette to let it dry.
2. Change cleaning cartridge at
least every 8 weeks.
Battery
performance
dropped
1. Foil and cutter are
worn which requires
more power for each
shave.
2. Shaver head is
regularly cleaned with
water but not
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned
with water, apply a drop of light
machine oil on top of the foil
once a week for lubrication.
significantly.
lubricated.
Shaving
performance
dropped
1. Foil and cutter are
worn.
2. Personal setting of
shaving performance
has been changed.
3. Shaving system is
clogged.
1. Renew Foil & Cutter cassette.
2. For a thorough and fast shave
we recommend the green
(intensive) setting.
3. Soak the Foil & Cutter cassette
into hot water with a drop of
dish liquid. Afterwards rinse it
properly and tap it out. Once
dry apply a drop of light
significantly.
machine oil on the foil.
Shaver turns off Foil and cutter are worn – Renew Foil & Cutter cassette.
with fully
which requires more
– Regularly oil the shaving
system, especially when
cleaning with water only.
charged battery. power than the motor
can deliver. The
appliance turns off.
Battery
Foil and cutter are worn – Renew Foil & Cutter cassette.
segments in the which requires more
display are
skipped with
decreasing
– Regularly oil the shaving
system, especially when
cleaning with water only.
power for each shave.
battery capacity.
Shaving parts
have been
changed recently
but replacement
symbol lights up.
Reset button has not
been pushed.
– Push the reset button for at
least 3 seconds to reset the
counter.
96279902/V-13
Korea/UK
13
|