Califone Switch 1117 User Manual

IMPORTANT SAFETY INSTRUCTIONS  
Model 1117  
7-Port USB Hub  
ATTENTION: ALL SAFETY AND  
OBJECT AND LIQUID ENTRY: CARE  
SHOULD BE TAKEN SO THAT  
OBJECTS DO NOT FALL AND LIQUIDS  
ARE NOT SPILLED ONTO THE  
APPLIANCE.  
OPERATING INSTRUCTIONS SHOULD  
BE READ BEFORE OPERATING THIS  
APPLIANCE. ALL OPERATING AND  
USE INSTRUCTIONS SHOULD BE  
FOLLOWED WHEN OPERATING THIS  
APPLIANCE. HEED AND ADHERE TO  
ALL WARNINGS ON THE APPLIANCE  
AND IN THE OPERATING  
DAMAGE REQUIRING SERVICE: THE  
APPLIANCE SHOULD BE SERVICED  
BY QUALIFIED PERSONNEL WHEN  
(A) OBJECTS HAVE FALLEN OR  
LIQUID HAS BEEN SPILLED INTO THE  
APPLIANCE, (B) THE APPLIANCE HAS  
BEEN EXPOSED TO RAIN, (C) THE  
APPLIANCE DOES NOT APPEAR TO  
BE OPERATING NORMALLY OR  
EXHIBITS A MARKED CHANGE IN  
PERFORMANCE, OR (D) THE  
Unpacking the Unit  
Inspect the unit once the packaging has been opened for any  
damage that may have occurred during shipping & contact us  
immediately. Please keep the packing material for further use.  
INSTRUCTIONS. RETAIN ALL SAFETY  
AND OPERATING INSTRUCTIONS  
FOR FUTURE REFERENCE.  
WATER & MOISTURE: DO NOT USE  
THIS APPLIANCE NEAR WATER, I.E.,  
BATHTUB, WASHBOWL, KITCHEN  
SINK, LAUNDRY TUB, WET  
Warranty Registration  
Califone warrants this product to be free from defective material and  
workmanship for one year from the purchase date. Our “Project  
Intercept” Customer Satisfaction program will replace defective parts  
and repair malfunctioning equipment under this warranty when the  
defect occurs under normal use.  
Model 1117  
BASEMENT OR SWIMMING POOL.  
APPLIANCE HAS BEEN DROPPED OR  
ITS ENCLOSURE DAMAGED.  
HEAT: SITUATE THE APPLIANCE  
AWAY FROM HEAT SOURCES SUCH  
AS RADIATORS, HEAT REGISTERS,  
STOVES OR OTHER APPLIANCES  
(INCLUDING AMPLIFIERS) THAT  
PRODUCE HEAT.  
SERVICING: THE USER SHOULD  
NOT ATTEMPT TO SERVICE THIS  
APPLIANCE BEYOND THAT  
DESCRIBED IN THE OPERATING  
INSTRUCTIONS. ALL OTHER  
SERVICING SHOULD BE REFERRED  
TO QUALIFIED SERVICE  
7-Port USB Hub  
All Damage Claims Must Be Made With The Freight Carrier  
Notify the freight carrier immediately if you observe any damage to  
the shipping carton or product. Repack the unit in the original carton  
and await inspection by the carrierʼs claim agent. Notify your dealer  
of the pending freight claim.  
CLEANING: THE APPLIANCE SHOULD  
BE CLEANED ONLY AS  
RECOMMENDED BY THE  
MANUFACTURER.  
PERSONNEL.  
Returning Your Unit for Service or Repairs  
Should your unit require service, contact our Customer Service  
Department online at califone.com/techsupport or via email at  
[email protected], or by phone at 800-722-0500 /  
818-407-2400 to first obtain a Return Authorization (RA) number  
before returning it to Califone. The unit must be returned to our  
factory via prepaid transportation only after the factory issues an  
RA number, which must be clearly written on the outside of the  
box.  
User Manual  
Califone® International Inc. 1145 Arroyo Avenue, #A  
San Fernando, CA 91340 USA  
Toll Free 800.722.0500 | Toll Free Fax 877.402.2248  
International Customers call 818.407.2400 or Fax 818.407.2405  
califone.com  
 
CAUTION  
Setup & Operation  
Model 1117  
7-Port USB Hub  
THIS USB HUB IS RATED TO ALLOW FOR 1.5 AMPS OF CURRENT  
WHEN BUS-POWERED (WITHOUT ANY EXTERNAL POWER ADAPTER).  
BEFORE CONNECTING ANY DEVICES TO THE USB HUB, ENSURE  
THAT THE TOTAL MAXIMUM CURRENT DRAW OF EACH OF THE  
DEVICES ADDED TOGETHER IS LESS THAN THE CURRENT RATING OF  
THE USB HUB AND THE COMPUTER’S POWER SUPPLY. FAILURE TO  
DO SO MAY DAMAGE THE PC, THE USB HUB, AND/OR ANY  
DEVICES CONNECTED TO THE USB HUB.  
1. Connect the square (Type “B”) connector of the  
included USB cable to the USB hub.  
Thank you for purchasing the Califone® Model 1117 USB Hub.  
I encourage you to visit our website (www.califone.com) to register  
your product for its warranty coverage, to sign up to receive our  
newsletter, download our catalog, and learn more about the  
complete line of Califone audio visual products, including portable  
and installed wireless PA systems, multimedia players and recorders,  
headphones and headsets, computer peripheral equipment, visual  
presentation products and language learning materials.  
IF YOU ARE USING A LARGE NUMBER OF DEVICES OR VERY  
POWER-INTENSIVE USB DEVICES, AN EXTERNAL DC POWER  
ADAPTER WITH A RATING OF UP TO 5V/3.5A MAY BE USED TO  
PROVIDE ADDITIONAL CURRENT.  
Type “B” USB Connector  
Sincerely,  
2. Connect the flat (Type “A”) connector of the cable to  
one of the computer’s USB ports.  
Troubleshooting  
Roscoe Anthony  
President, Califone® International, Inc.  
USB Hub does not work (Power LED not lit):  
• Check the connection between the computer and hub  
• Try connecting the hub to a different USB port on the  
computer  
System Contents  
Type “A” USB Connector  
One or more devices connected to the hub are  
malfunctioning:  
Model 1117 7-port USB Hub (with stand)  
2.5’ USB cable for connection to a computer  
User Manual  
• If there are multiple devices connected to the hub, try  
disconnecting the most recently connected devices until the  
problem goes away  
3. The red power LED should light. The USB hub should  
automatically be detected by the computer. Allow the  
computer to completely install the device. It should  
indicate when it has completed.  
• Try restarting the computer, or reconnecting the USB hub  
to the computer  
Specifications and Features  
• If too much power is being consumed by any of the  
devices, you may need to use an external DC power adapter  
to power the USB hub  
• USB 2.0 and 1.1 compatible  
• 7 device ports and one port for computer connection  
• High-speed, Full-speed and Low-speed operation  
• Bus-powered operation:  
• Idle current: ~6 mA  
• Operating current: ~250 mA  
• Devices may use up to 1.5 Amps total current  
• Self-powered with external power adapter (not included)  
4. You may now begin connecting devices to the hub  
one at a time. Use the 7 USB ports on the USB hub as  
you would the USB ports on the computer. The  
computer may automatically detect connected devices  
or it may require drivers for certain devices. Refer to the  
instructions that come with those devices for support  
regarding their installation.  
The computer displays an error that the USB bus is  
drawing too much current:  
• You may need to use an external DC power adapter to  
power the USB hub. The power adapter should be a  
switching type with a rating of up to 5V/3.5A  
 

Belkin Network Card F1DP101M User Manual
Bionaire Fan BASF17V User Manual
Blue Rhino Gas Grill 129322 User Manual
Breville Hot Beverage Maker BKE490XL User Manual
Brinly Hardy Lawn Aerator PA 40 BH User Manual
Cambridge SoundWorks Stereo Amplifier AVS550 User Manual
Canon Photo Scanner CP910 User Manual
Carrier Air Conditioner 90MA MF MU User Manual
Casio Digital Camera EX Z335 User Manual
Celestron Telescope 21052 User Manual