2358-1
Module No. 2358
GETTING ACQUAINTED
Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to carefully read this manual and keep it on hand for later reference when necessary.
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be
found in the “REFERENCE” section.
Crown
GENERAL GUIDE
• Press C to change from mode to mode.
• In any mode, press L to illuminate the display.
• If the digital display of your watch is continuously changing, see “Auto Display Function” for information on how to stop it.
Timekeeping Mode
Telememo Mode
World Time Mode
Alarm Mode
Stopwatch Mode
Press C.
Daylight Saving Time (DST)
Daylight Saving Time advances the time setting by one hour from Standard Time.
Remember that not all countries or even local areas use Daylight Saving Time.
TIMEKEEPING
Use the Timekeeping Mode to set and view the current time and date.
• In the Timekeeping Mode, press D to change the display format as shown below.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
second digits start to flash, which indicates the setting
screen.
Date
Day of week Year
Month – Day
Date/Time
Analog
World map
Hour hand Minute hand
2. Press C to move the flashing to the DST On/Off
setting.
3. Press D to toggle between Daylight Saving Time and
standard time.
• Note that you cannot switch between standard time
GMT differential
and Daylight Saving Time while
the city code.
is selected as
PM
indicator
Seconds
Hour : Minutes
Second hand
4. Press A to exit the setting screen.
• The DST indicator appears on the display to indicate
that daylight saving time is turned on.
• The time zone that corresponds to your Home City code (see below) flashes on the
Date/Time screen’s world map.
To set the analog time
1. Pull the crown out.
• This causes the second hand to stop.
2. Set the minute and hour hands by turning the crown.
3. Push the crown back in to restart timekeeping.
Read This Before You Set the Time and Date !
The digital times displayed in the Timekeeping Mode and World Time Mode are
linked. Because of this, make sure you select a city code for your Home City (the city
where you normally use the watch).
• This watch features separate digital and analog timekeeping. Note that the digital
time and analog time are independent of each other, and must be set separately.
To set the digital time and date
1. In the Timekeeping Mode, hold down A until the
second digits start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
City code
TELEMEMO
Remaining memory
Telememo lets you store up to 30 records, each
containing name and telephone number data. Records
are automatically sorted based on the characters of the
name. You can recall records by scrolling through them
on the display.
• See “CHARACTER LIST” for details on how the watch
sorts records.
Number of records stored
Seconds
Day
DST
City Code
Year
Hour
Month
Minutes
• The name can show only three characters at a time, so
longer text scrolls continuously from right to left.
• All of the operations in this section are performed in the
Telememo Mode, which you enter by pressing C.
3. When the setting you want to change is flashing, press D to change it as described
below.
Setting
Seconds
Do this...
Press D to reset to 00.
Name
Telephone number
Press D to toggle between Daylight Saving Time and standard
time. See “Daylight Saving Time (DST)” for details.
DST
To create a new Telememo record
1. In the Telememo Mode, press B or D until the new
City Code, Hour,
Minutes, Year,
Month, Day
Text area
data screen appears.
• The new data screen is the one that is blank (contains
no name and telephone number).
Press D(+) to change the setting.
• See “CITY CODE TABLE” for a complete list of available codes.
• Pressing D while the seconds count is in the range of 30 to 59 resets the
seconds to 00 and adds 1 to the minutes. In the range of 00 to 29, the minutes
count is unchanged.
• If the message
appears on the display, it
means that memory is full. To store another record,
you will first have to delete some of the records stored
in memory.
4. Press A to exit the setting screen.
2. Hold down A until the flashing cursor ( ) appears in
the text area of the display, which indicates the setting
screen.
3. Use B and D to change the character at the cursor
position in the text area. The character changes in the
following sequence.
Note
• The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
• The year can be set in the range of 2000 to 2039.
• The watch’s built-in full automatic calendar automatically makes allowances for
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after you have the watch’s battery replaced.
Number area
New Data screen
Press
(space)
.
Press
.
to
to
To toggle between 12-hour and 24-hour timekeeping
While the Date/Time screen is on the display in the Timekeeping Mode, press B to
toggle between 12-hour and 24-hour timekeeping for the digital time.
• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with 24
indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also
applied in all other modes.
2358-3
REFERENCE
CHARACTER LIST
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
(space)
1
2
11
12
13
14
15
16
17
18
19
20
J
K
L
M
N
O
P
Q
R
S
21
22
23
24
25
26
27
28
29
30
T
U
V
W
X
Y
Z
0
1
2
31
32
33
34
35
36
37
38
39
40
3
4
5
6
7
8
9
.
-
/
A
B
C
D
E
F
G
H
I
3
Auto Display Function
Auto Display function of this watch continually changes
the contents of the digital display. Note that you cannot
use any of the watch’s other functions while the Auto
Display function is operating.
4
5
6
To turn the Auto Display off
Hold down C for about two seconds until the watch
beeps.
7
8
To turn the Auto Display on
9
Hold down C for one to two seconds until the watch beeps.
• Note that the Auto Display function cannot be performed while you are making
settings.
10
Auto Return Features
• If you leave a screen with flashing digits or a cursor on the display for two or three
minutes without performing any operation, the watch automatically saves anything
you have input up to that point and exits the setting screen.
• If you leave the watch in Telememo or Alarm Mode for about two or three minutes
without performing any operation, it automatically changes to the Timekeeping
Mode.
CITY CODE TABLE
City
GMT
City
HONOLULU
Other major cities in same time zone
Code
Differential
–––
HNL
–11
–10
–9
PAGO PAGO
PAPEETE
NOME
ANC ANCHORAGE
SAN FRANCISCO, LAS VEGAS, VANCOUVER, SEATTLE,
DAWSON CITY
EL PASO, EDMONTON
HOUSTON, DALLAS/FORT WORTH, NEW ORLEANS,
MEXICO CITY, WINNIPEG
MONTREAL, DETROIT, MIAMI, BOSTON, PANAMA CITY,
HAVANA, LIMA, BOGOTA
LA PAZ, SANTIAGO, PORT OF SPAIN
SAO PAULO, BUENOS AIRES, BRASILIA, MONTEVIDEO
LAX LOS ANGELES
–8
Data and Setting Scrolling
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls through the data at high speed.
DEN
CHI
DENVER
–7
–6
CHICAGO
NYC
CCS
NEW YORK
CARACAS
–5
Initial Screens
–4
–3
–2
–1
RIO RIO DE JANEIRO
–––
–––
When you enter the Telememo or World Time Mode, the data you were viewing when
you last exited the mode appears first.
PRAIA
GMT
LON
LONDON
+0
+1
+2
DUBLIN, LISBON, CASABLANCA, DAKAR, ABIDJAN
World Time
MILAN, ROME, MADRID, AMSTERDAM, ALGIERS,
HAMBURG, FRANKFURT, VIENNA, STOCKHOLM, BERLIN
ATHENS, HELSINKI, ISTANBUL, BEIRUT, DAMASCUS,
CAPE TOWN
KUWAIT, RIYADH, ADEN, ADDIS ABABA, NAIROBI, MOSCOW
SHIRAZ
• The current time in all World Time Mode cities is calculated in accordance with the
Greenwich Mean Time (GMT) differential for each city, based on the current Home
City time setting in the Timekeeping Mode.
PAR
PARIS
CAIRO
CAI
JRS JERUSALEM
• Daylight Saving Time (DST) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving
Time.
• The GMT differential is the time difference of the time zone where the city is located
from Greenwich Mean Time.
• GMT differential is calculated by this watch based on Universal Time Coordinated
(UTC) data.
JED
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
JEDDAH
TEHRAN
DUBAI
KABUL
KARACHI
DELHI
DHAKA
YANGON
BANGKOK
+3
+3.5
+4
+4.5
+5
+5.5
+6
+6.5
+7
ABU DHABI, MUSCAT
MALE
MUMBAI, CALCUTTA
COLOMBO
JAKARTA, PHNOM PENH, HANOI, VIENTIANE
SINGAPORE, KUALA LUMPUR, BEIJING, TAIPEI, MANILA,
PERTH, ULAANBAATAR
SEOUL, PYONGYANG
DARWIN
MELBOURNE, GUAM, RABAUL
PORT VILA
CHRISTCHURCH, NADI, NAURU ISLAND
HKG HONG KONG
+8
Backlight Precautions
In any mode, press L to illuminate the display for about two seconds.
• The electro-luminescent panel that provides illumination loses power after very long
use.
TYO
ADL
SYD
NOU
TOKYO
ADELAIDE
SYDNEY
NOUMEA
+9
+9.5
+10
+11
+12
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The watch may emit an audible sound whenever the display is illuminated. This is
due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
WLG WELLINGTON
*Based on data as of June 2000.
• The backlight automatically turns off whenever an alarm sounds.
• Frequent use of the backlight shortens the battery life.
|