Package Contains:
1
3
x
x
Simulated Flame Cloth
with Magnets
Orange MR11 12v 20w
1
x
Blue MR11 12v 20w
1
6
1
x
x
x
Flame Fixture
Screws
Chain for Hanging
Troubleshooting
• If the unit is not functional – check main power supply is ‘on’ and check fuses.
• If the unit is functional but lamp does not light - lamp may require replacing.
• If after trying this solution you still have a problem contact your dealer or CHAUVET.
Contact Chauvet
USA
Tecnical Assistance: 1-800-762-1084 (954) 929-1115
E-Mail [email protected]
Europe
Technical Assistance: (0113) 276-0755
E-Mail [email protected]
Caution
Do not obstruct the air vents.
Do not touch unit or lamps while hot.
Never put any objects through the air grill on the top of the unit.
No user serviceable parts inside, please refer to CHAUVET for service.
Bob Flame Light
Power Connections
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other
connections be required they must be carried out with the following configuration.
CH-BOB
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.
In the UK, it is required that all mains plugs are fitted with 5A fuses.
User Guide
Technical Specifications
Please read these instructions carefully befor use
Power
Fuse
120V~60Hz AC
230V~50Hz AC
20mm Glass 1A Fast Blow
20mm Glass 0.6A Fast Blow
World-wide Headquarters:
3000 North 29th Ct., Hollywood, Florida, USA, FL 33020
Tel: +1-954-929-1115 Fax: +1-954-929-5560
4 x 12V 20W
Part No MR11 12v 20W
4 x 12V 20W
Part No MR11 12v 20W
Lamps
Dimensions
Weight
279mm x 279mm x 160mm / 11in x 11in x 6.3in
5kg / 11lbs
279mm x 279mm x 160mm / 11in x 11in x 6.3in
5kg / 11lbs
European Office:
Unit 18, Hunslet Trading Estate, Leeds, UK
LS10 1BL
User Informtion (Please complete for your records)
Tel: (0113) 276-0755 Fax: (0113) 277-6675
Date Purchased:
Dealer Stamp
/
/
Serial No: ________________
Model: CH-BOB FLAME LIGHT
|